EFM32TG222F16-QFP48T - 32MHz Cortex-M3 MCU | Silicon Labs
部品番号: EFM32TG222F16-QFP48T ✓ 生産中EFM32TG222F16-QFP48T 概要
A microcontroller is an integrated circuit containing a processor core, program memory, data memory, and peripherals such as timers, analog interfaces, communications blocks, and GPIO. The EFM32 family belongs to the ARM Cortex-M3 microcontroller category and emphasizes energy-efficient embedded control. Its architecture suits systems that alternate between periods of active processing and long periods of reduced-power operation.
Core features include a 32 MHz ARM Cortex-M3 processor, 16 KB of Flash, 4 KB of RAM, 37 digital I/O pins, and two 16-bit timers. Silicon Labs also identifies three operational amplifiers and AES support in the device listing. These resources allow a compact design to combine control logic, signal conditioning, and secure communication without requiring several separate analog or security ICs.
The EFM32 low-power platform provides an operating mode consuming 150 uA/MHz and a Stop mode reaching 0.6 uA, according to the manufacturer EFM32TG datasheet. These figures make duty-cycled operation practical for devices that spend most of their time asleep but must respond quickly when a sensor, user interface, or communications event occurs.
Typical applications include low-power sensor nodes, battery-operated industrial monitors, connected measurement equipment, compact security controllers, analog-sensing products, and energy-conscious IoT devices. The 48-pin TQFP package also exposes more I/O than smaller QFN options while remaining suitable for automated PCB assembly.
Designers should confirm the complete pin-assignment table, decoupling requirements, clock options, and analog operating limits in the manufacturer datasheet. Firmware and peripheral-equivalence checks are essential when the MCU is used as a replacement in an existing PCB, even when the package dimensions match.
This page combines the EFM32TG222F16-QFP48T specifications, package information, power characteristics, application guidance, and an engineering comparison with identified same-package alternatives. It also highlights the practical checks needed for PCB reuse, firmware migration, and low-power system design.
ドロップイン代替品: EFM32TG222F16-QFP48T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EFM32TG222F16-QFP48T (同一形状・フットプリント) — 相違点: Package, Flash Memory, Series.
EFM32TG222F32-QFP48T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32TG222F16-QFP48
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32ZG222F16-QFP48T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32HG222F32G-B-QFP48
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAMD21G15B-AU
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32TG222F16-QFP48T 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| RAM | 4 KB |
| Digital I/O Pins | 37 pins |
| Timer Count | 2 x 16-bit timers |
| Operational Amplifiers | 3 operational amplifiers |
| Security Peripheral | AES hardware accelerator |
| Operating Voltage Range | 1.85 V to 3.8 V |
| Stop Mode Current | 0.6 uA |
| Run Mode Current | 150 uA/MHz |
| パッケージ | 48-pin TQFP, 7 x 7 mm |
| 実装タイプ | Surface mount |
| Processor Architecture | ARM Cortex-M3, 32-bit |
EFM32TG222F16-QFP48T 48-pin tqfp, 7 x 7 mm ピン配置ガイド
EFM32TG222F16-QFP48T (48-pin tqfp, 7 x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EFM32TG222F16-QFP48T.
詳細は データシート をご参照ください。
主な用途
EFM32TG222F16-QFP48T の用途: 6 件s: Battery-Powered Sensor Node, Industrial Condition Monitor, Secure Connected Controller, Portable Measurement Instrument, IoT Edge Device, Low-Power Access Controller.
Battery-Powered Sensor Node
The EFM32TG222F16-QFP48T fits battery-powered sensor nodes that periodically measure a physical quantity and then return to a low-power state. Its 32 MHz ARM Cortex-M3 core provides enough processing capability for sensor conditioning, filtering, and local data preparation, while the EFM32TG datasheet specifies operation at 150 uA/MHz in Run mode and 0.6 uA in Stop mode. The 16 KB Flash footprint supports compact firmware, and 4 KB of RAM is suitable for small acquisition buffers. A practical implementation would keep analog sensing near the three operational amplifiers and use the MCU's GPIO for a low-power wake mechanism. Average current should be evaluated across active measurement time, Stop-mode duration, and sensor standby current rather than from the CPU rating alone.
おすすめ
Industrial Condition Monitor
The EFM32TG222F16-QFP48T is suitable for industrial equipment that monitors temperature, vibration, current, or digital sensor events without requiring a high-performance application processor. Its two 16-bit timers can support periodic sampling and time-based control, while 37 digital I/O pins simplify connections to sensors, alert outputs, and local switches. The 1.85 V to 3.8 V operating range accommodates regulated embedded rails, and the 48-pin TQFP provides ample routing flexibility for a mixed-signal board. For a production design, confirm the operating-temperature limits and analog input limits in the manufacturer datasheet. Low-power wake-up behavior is especially useful in machines that remain energized but are idle for long periods between service or fault events.
おすすめ
Secure Connected Controller
The EFM32TG222F16-QFP48T can serve as the central controller in a compact secure communications product because it combines an ARM Cortex-M3 core with AES hardware, 37 GPIO pins, and a low-power operating platform. AES support can offload cryptographic processing from the Cortex-M3 core, improving system-level responsiveness for authentication, encrypted configuration storage, or protected command exchange. The 16 KB Flash capacity is appropriate for a focused firmware image, while 4 KB of RAM supports protocol buffers and stack usage. Designers should evaluate the exact cryptography implementation and peripheral requirements against the device security documentation. For networked products, the MCU can wake from Stop mode, process a short message burst, and return to sleep to conserve energy between traffic events.
おすすめ
Portable Measurement Instrument
The EFM32TG222F16-QFP48T supports portable measurement instruments where a dedicated display, communications subsystem, and analog front end must share limited space. Its three integrated operational amplifiers can handle input buffering or gain stages close to the MCU, reducing board area and helping control analog signal paths. The 48-pin TQFP provides 37 digital I/O pins for a display interface, buttons, status indicators, and external memory or communications components. A 32 MHz Cortex-M3 core is suitable for real-time sampling control, calibration logic, and instrument state management. Board-level planning should include the MCU's 1.85 V to 3.8 V supply range, analog reference requirements, grounding strategy, and decoupling. The 16 KB Flash and 4 KB RAM favor a focused instrument architecture rather than a large embedded graphical application.
おすすめ
IoT Edge Device
The EFM32TG222F16-QFP48T is appropriate for IoT edge devices that combine local sensing, simple control, and intermittent network activity. The 32-bit Cortex-M3 processor can handle protocol state machines, local filtering, and actuator commands, while the low-power Stop mode supports long idle intervals between events. Its 37 GPIO pins allow connection of sensors, indicators, relays, or digital interfaces without an external I/O expander. The three operational amplifiers add flexibility for analog sensor conditioning close to the MCU. A practical implementation should define a strict wake-up policy, disable unused peripherals, and estimate average power using the actual duty cycle. The 1.85 V to 3.8 V operating range also makes the device suitable for regulated 2.5 V and 3.3 V system rails.
おすすめ
Low-Power Access Controller
The EFM32TG222F16-QFP48T can implement a compact access-control reader that manages inputs, local indicators, communication tasks, and encrypted credential data. AES hardware accelerates supported cryptographic operations, while the low-power platform enables the controller to consume little energy while waiting for a card, keypad, or network event. The 48-pin TQFP provides 37 GPIO pins for readers, LEDs, relays, and status interfaces. Its 32 MHz Cortex-M3 core supports deterministic peripheral handling and protocol processing without a separate application processor. In a physical-access design, verify the operating-temperature range, brownout behavior, watchdog configuration, and security implementation against the manufacturer documentation. The 16 KB Flash footprint also encourages compact firmware and disciplined driver architecture.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EFM32TG222F16-QFP48T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EFM32TG222F32-QFP48T | EFM32TG222F16-QFP48 | EFM32ZG222F16-QFP48T | EFM32HG222F32G-B-QFP48 | ATSAMD21G15B-AU |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Microchip Technology |
| Package | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Processor Core | ARM Cortex-M3, 32-bit | ARM Cortex-M3, 32-bit | ARM Cortex-M3, 32-bit | ARM Cortex-M0+, 32-bit | ARM Cortex-M3, 32-bit | ARM Cortex-M0+, 32-bit |
| Flash Memory | 16 KB | 32 KB | 16 KB | 16 KB | 32 KB | 32 KB |
主な差別化要因
- Higher Flash capacity in the closest same-family option (vs EFM32TG222F32-QFP48T)
- Identical core speed and RAM within the EFM32TG222F16 family (vs EFM32TG222F16-QFP48)
- Cortex-M3 processing core rather than Cortex-M0+ (vs ATSAMD21G15B-AU)
- Compact integration of analog and security resources (vs EFM32ZG222F16-QFP48T)
設計ノート
The EFM32TG datasheet identifies Run-mode consumption of 150 uA/MHz and Stop-mode consumption as low as 0.6 uA. Budget the complete duty cycle rather than relying on the Stop-mode figure alone. Include MCU active time, sensor standby current, analog biasing, regulator quiescent current, and communication bursts in the average-power calculation. Confirm the minimum regulator headroom for each rail, especially when the device wakes from Stop mode and enables the analog peripherals.
Place all required input and output decoupling capacitors close to their associated supply pins, using the exact values and network shown in the manufacturer datasheet. Route the 48-pin TQFP perimeter carefully so analog inputs, oscillator connections, and sensitive sensing nodes remain away from high-current switching paths. Provide a continuous ground reference beneath and around the device, and inspect the design for thermal coupling between the three operational amplifiers, digital sections, and external power components.
Do not treat a shared TQFP-48 outline as proof that two MCUs are interchangeable. Compare every pin name, analog reference requirement, supply connection, oscillator option, debug interface, and peripheral instance before reusing a PCB. Firmware porting also requires checking startup code, interrupt vectors, memory-map addresses, peripheral registers, clock settings, and library support. A hardware fit check without this functional review can create boot failures or subtle peripheral mismatches.
Keep the three operational amplifiers near the sensors or signal sources they serve, and follow the datasheet guidance for analog reference and bypass components. Separate analog and digital return paths as far as practical, use compact ground connections at the MCU, and avoid routing high-speed or switching signals beneath sensitive analog inputs. If the internal amplifiers are used for gain, verify input common-mode range and output swing at the selected 1.85 V to 3.8 V supply condition before finalizing the schematic.
コンプライアンス情報
The device documentation confirms the EFM32TG family and its low-power operation, but the available manufacturer and distributor pages do not state the requested compliance statuses. Confirm declarations for the exact orderable MPN with Silicon Labs before procurement.