Silicon Labs

EFM32TG222F16-QFP48T - 32MHz Cortex-M3 MCU | Silicon Labs

부품 번호: EFM32TG222F16-QFP48T ✓ 활성
1.85 V to 3.8 V Vdss 0.6 uA Id 48-pin TQFP, 7 x 7 mm Package 32 MHz Speed 16 KB Memory
MOQ: 1 |

EFM32TG222F16-QFP48T 개요

Silicon Labs EFM32TG222F16-QFP48T is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 x 7 mm. The device combines a low-power embedded platform, fast wake-up behavior, energy-saving modes, AES hardware, and three operational amplifiers in one compact package.

A microcontroller is an integrated circuit containing a processor core, program memory, data memory, and peripherals such as timers, analog interfaces, communications blocks, and GPIO. The EFM32 family belongs to the ARM Cortex-M3 microcontroller category and emphasizes energy-efficient embedded control. Its architecture suits systems that alternate between periods of active processing and long periods of reduced-power operation.

Core features include a 32 MHz ARM Cortex-M3 processor, 16 KB of Flash, 4 KB of RAM, 37 digital I/O pins, and two 16-bit timers. Silicon Labs also identifies three operational amplifiers and AES support in the device listing. These resources allow a compact design to combine control logic, signal conditioning, and secure communication without requiring several separate analog or security ICs.

The EFM32 low-power platform provides an operating mode consuming 150 uA/MHz and a Stop mode reaching 0.6 uA, according to the manufacturer EFM32TG datasheet. These figures make duty-cycled operation practical for devices that spend most of their time asleep but must respond quickly when a sensor, user interface, or communications event occurs.

Typical applications include low-power sensor nodes, battery-operated industrial monitors, connected measurement equipment, compact security controllers, analog-sensing products, and energy-conscious IoT devices. The 48-pin TQFP package also exposes more I/O than smaller QFN options while remaining suitable for automated PCB assembly.

Designers should confirm the complete pin-assignment table, decoupling requirements, clock options, and analog operating limits in the manufacturer datasheet. Firmware and peripheral-equivalence checks are essential when the MCU is used as a replacement in an existing PCB, even when the package dimensions match.

This page combines the EFM32TG222F16-QFP48T specifications, package information, power characteristics, application guidance, and an engineering comparison with identified same-package alternatives. It also highlights the practical checks needed for PCB reuse, firmware migration, and low-power system design.

드롭인 대체품: EFM32TG222F16-QFP48T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: EFM32TG222F16-QFP48T (동일 폼 팩터 및 풋프린트) — 차이점: Package, Flash Memory, Series.

Microchip Technology
Package: 48-pin TQFP (7x7 mm)
Flash Memory: 32 KB (32K x 8)
비교 대상: EFM32TG222F16-QFP48T →
Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Series: Tiny Gecko
비교 대상: EFM32TG222F16-QFP48T →

EFM32TG222F32-QFP48T

✅ 드롭인
📦 48-pin TQFP (7 x 7 mm)
Flash increases from 16 KB to 32 KB, a 100% increase; CPU remains 32 MHz and RAM remains 4 KB

📋 참조 대체품 (카탈로그에 없음)

EFM32TG222F16-QFP48

✅ 드롭인
Silicon Labs
📦 48-pin TQFP (7 x 7 mm)
32-bit ARM Cortex-M3 microcontroller · Tiny Gecko · 32 MHz · 16 kB · 16K x 8 bits · 4 kB · 37 pins · 2 x 16-bit timers

가격 문의

데이터시트 보기 →

EFM32ZG222F16-QFP48T

✅ 드롭인
📦 48-pin TQFP (7 x 7 mm)
Flash remains 16 KB while the processor family changes from Cortex-M3 to Cortex-M0+, requiring peripheral and firmware verification

📋 참조 대체품 (카탈로그에 없음)

EFM32HG222F32G-B-QFP48

✅ 드롭인
📦 48-pin TQFP (7 x 7 mm)
Flash increases from 16 KB to 32 KB, a 100% increase, while the MCU family and peripheral implementation change

📋 참조 대체품 (카탈로그에 없음)

ATSAMD21G15B-AU

✅ 드롭인
Microchip Technology
📦 48-pin TQFP
ARM Cortex-M0+ (32-bit) · 48 MHz · 32 KB (32K x 8) · 4 KB · 48-pin TQFP (7x7 mm) · -40C to +85C (Industrial) · 1.62 V to 3.63 V · Up to 38 (5 V tolerant inputs)

가격 문의

데이터시트 보기 →

EFM32TG222F16-QFP48T 최대 정격 & 전기적 특성

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB
RAM 4 KB
Digital I/O Pins 37 pins
Timer Count 2 x 16-bit timers
Operational Amplifiers 3 operational amplifiers
Security Peripheral AES hardware accelerator
Operating Voltage Range 1.85 V to 3.8 V
Stop Mode Current 0.6 uA
Run Mode Current 150 uA/MHz
패키지 48-pin TQFP, 7 x 7 mm
실장 유형 Surface mount
Processor Architecture ARM Cortex-M3, 32-bit

EFM32TG222F16-QFP48T 48-pin tqfp, 7 x 7 mm 핀 구성 가이드

EFM32TG222F16-QFP48T(48-pin tqfp, 7 x 7 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

EFM32TG222F16-QFP48T의 48-pin tqfp, 7 x 7 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: EFM32TG222F16-QFP48T.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

EFM32TG222F16-QFP48T 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Node, Industrial Condition Monitor, Secure Connected Controller, Portable Measurement Instrument, IoT Edge Device, Low-Power Access Controller.

🧩

Battery-Powered Sensor Node

The EFM32TG222F16-QFP48T fits battery-powered sensor nodes that periodically measure a physical quantity and then return to a low-power state. Its 32 MHz ARM Cortex-M3 core provides enough processing capability for sensor conditioning, filtering, and local data preparation, while the EFM32TG datasheet specifies operation at 150 uA/MHz in Run mode and 0.6 uA in Stop mode. The 16 KB Flash footprint supports compact firmware, and 4 KB of RAM is suitable for small acquisition buffers. A practical implementation would keep analog sensing near the three operational amplifiers and use the MCU's GPIO for a low-power wake mechanism. Average current should be evaluated across active measurement time, Stop-mode duration, and sensor standby current rather than from the CPU rating alone.

🏭

Industrial Condition Monitor

The EFM32TG222F16-QFP48T is suitable for industrial equipment that monitors temperature, vibration, current, or digital sensor events without requiring a high-performance application processor. Its two 16-bit timers can support periodic sampling and time-based control, while 37 digital I/O pins simplify connections to sensors, alert outputs, and local switches. The 1.85 V to 3.8 V operating range accommodates regulated embedded rails, and the 48-pin TQFP provides ample routing flexibility for a mixed-signal board. For a production design, confirm the operating-temperature limits and analog input limits in the manufacturer datasheet. Low-power wake-up behavior is especially useful in machines that remain energized but are idle for long periods between service or fault events.

🌐

Secure Connected Controller

The EFM32TG222F16-QFP48T can serve as the central controller in a compact secure communications product because it combines an ARM Cortex-M3 core with AES hardware, 37 GPIO pins, and a low-power operating platform. AES support can offload cryptographic processing from the Cortex-M3 core, improving system-level responsiveness for authentication, encrypted configuration storage, or protected command exchange. The 16 KB Flash capacity is appropriate for a focused firmware image, while 4 KB of RAM supports protocol buffers and stack usage. Designers should evaluate the exact cryptography implementation and peripheral requirements against the device security documentation. For networked products, the MCU can wake from Stop mode, process a short message burst, and return to sleep to conserve energy between traffic events.

📱

Portable Measurement Instrument

The EFM32TG222F16-QFP48T supports portable measurement instruments where a dedicated display, communications subsystem, and analog front end must share limited space. Its three integrated operational amplifiers can handle input buffering or gain stages close to the MCU, reducing board area and helping control analog signal paths. The 48-pin TQFP provides 37 digital I/O pins for a display interface, buttons, status indicators, and external memory or communications components. A 32 MHz Cortex-M3 core is suitable for real-time sampling control, calibration logic, and instrument state management. Board-level planning should include the MCU's 1.85 V to 3.8 V supply range, analog reference requirements, grounding strategy, and decoupling. The 16 KB Flash and 4 KB RAM favor a focused instrument architecture rather than a large embedded graphical application.

🧩

IoT Edge Device

The EFM32TG222F16-QFP48T is appropriate for IoT edge devices that combine local sensing, simple control, and intermittent network activity. The 32-bit Cortex-M3 processor can handle protocol state machines, local filtering, and actuator commands, while the low-power Stop mode supports long idle intervals between events. Its 37 GPIO pins allow connection of sensors, indicators, relays, or digital interfaces without an external I/O expander. The three operational amplifiers add flexibility for analog sensor conditioning close to the MCU. A practical implementation should define a strict wake-up policy, disable unused peripherals, and estimate average power using the actual duty cycle. The 1.85 V to 3.8 V operating range also makes the device suitable for regulated 2.5 V and 3.3 V system rails.

🔒

Low-Power Access Controller

The EFM32TG222F16-QFP48T can implement a compact access-control reader that manages inputs, local indicators, communication tasks, and encrypted credential data. AES hardware accelerates supported cryptographic operations, while the low-power platform enables the controller to consume little energy while waiting for a card, keypad, or network event. The 48-pin TQFP provides 37 GPIO pins for readers, LEDs, relays, and status interfaces. Its 32 MHz Cortex-M3 core supports deterministic peripheral handling and protocol processing without a separate application processor. In a physical-access design, verify the operating-temperature range, brownout behavior, watchdog configuration, and security implementation against the manufacturer documentation. The 16 KB Flash footprint also encourages compact firmware and disciplined driver architecture.

What are the key specifications of EFM32TG222F16-QFP48T that engineers should know?
The EFM32TG222F16-QFP48T is a 32-bit ARM Cortex-M3 MCU operating up to 32 MHz, with 16 KB of Flash, 4 KB of RAM, 37 GPIO pins, two 16-bit timers, three operational amplifiers, and AES hardware. It is housed in a 48-pin, 7 x 7 mm TQFP package and operates from 1.85 V to 3.8 V. According to the Silicon Labs EFM32TG datasheet, the low-power platform supports operation at 150 uA/MHz in Run mode and as little as 0.6 uA in Stop mode.
Where can I download the EFM32TG222F16-QFP48T datasheet PDF?
The official EFM32TG222F16-QFP48T datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32tg-datasheet.pdf. Use the manufacturer document for the complete 48-pin assignment, electrical limits, clock configuration, memory map, and peripheral descriptions. The manufacturer device page for EFM32TG222F16-QFP48 provides an additional specifications view for comparing device variants and package options.
Where can I find the EFM32TG222F16-QFP48T pinout?
The EFM32TG222F16-QFP48T pinout is defined in the pin-description section and package drawings of the official Silicon Labs EFM32TG datasheet. The device uses a 48-pin, 7 x 7 mm TQFP package and exposes 37 digital I/O pins, with the remaining pins assigned to power, ground, reset, clock, and other fixed functions. Use the manufacturer pin-description table when assigning PCB tracks because generic TQFP-48 drawings do not identify the MCU-specific functions.
Is the EFM32TG222F16-QFP48T suitable for battery-powered applications?
Yes, the EFM32TG222F16-QFP48T is suitable for battery-powered and energy-sensitive products. The manufacturer EFM32TG datasheet states that the Tiny Gecko platform can operate at 150 uA/MHz in Run mode and 0.6 uA in Stop mode. Its 32-bit Cortex-M3 core provides useful processing capability while the low-power states support duty-cycled sensor, monitoring, and remote-control products that spend substantial time asleep.
How much memory does the EFM32TG222F16-QFP48T have?
The EFM32TG222F16-QFP48T includes 16 KB of Flash memory and 4 KB of RAM. The Silicon Labs device specifications and distributor listings identify the Flash organization as 16K x 8 bytes. This memory footprint is suitable for compact embedded applications, especially those requiring interrupt-driven control, low-power state management, and a modest firmware image rather than a large graphical user interface or high-bandwidth data processing.
What peripherals are integrated into the EFM32TG222F16-QFP48T?
The EFM32TG222F16-QFP48T integrates 37 digital I/O pins, two 16-bit timers, three operational amplifiers, and AES hardware with its Cortex-M3 core. According to the Silicon Labs product listing and Mouser device description, these blocks support compact analog conditioning and secure data handling without separate amplifiers. Use the EFM32TG datasheet for the complete list of converters, communication interfaces, interrupt sources, and analog operating conditions.
Can the EFM32TG222F16-QFP48T operate at 3.3 V?
Yes, the EFM32TG222F16-QFP48T operates from 1.85 V to 3.8 V, so a regulated 3.3 V rail falls within its documented operating range. This range includes common industrial and embedded supply levels, although the designer must still observe the limits for each analog and digital supply pin. The complete decoupling and power-sequencing arrangement should follow the circuit shown in the manufacturer datasheet.
Where can I buy EFM32TG222F16-QFP48T online?
Use the Request a Quote form on this XAIPART page to request EFM32TG222F16-QFP48T availability, current commercial terms, and lead time. The exact orderable MPN is EFM32TG222F16-QFP48T, where the final T identifies the tape-and-reel shipping configuration. Request the quantity and target date with the inquiry so the manufacturer-compatible order details can be confirmed.
What is the price of EFM32TG222F16-QFP48T?
The current commercial terms for EFM32TG222F16-QFP48T are handled through the Request a Quote form on this XAIPART page. The inquiry should identify the exact MPN, required quantity, shipment configuration, and delivery country or region. This approach accommodates changing component availability without presenting a potentially stale price or lead-time estimate as a fixed commitment.
What is the lead time and stock status for EFM32TG222F16-QFP48T?
Current stock status and lead time for EFM32TG222F16-QFP48T should be requested through the Request a Quote form on this page. Include your required quantity and target delivery date in the request. Because availability can vary with production and distribution cycles, the supplier should confirm the exact MPN, package form, and delivery schedule before the order is committed.
Is EFM32TG222F16-QFP48T in stock?
The current EFM32TG222F16-QFP48T inventory position is confirmed through the Request a Quote form on this page. Submit the desired quantity and shipment form to receive an availability response for the exact tape-and-reel ordering code. Engineers should not infer live stock from a product-page search result because inventory can change independently of the device documentation.
EFM32TG222F16-QFP48T vs EFM32TG222F32-QFP48T - which is better for a memory-constrained design?
EFM32TG222F16-QFP48T is the better choice when 16 KB of Flash is sufficient and preserving RAM and board area matters. EFM32TG222F32-QFP48T provides 32 KB of Flash while retaining 4 KB of RAM, a 32 MHz Cortex-M3 core, 37 GPIO pins, and two 16-bit timers. According to the Silicon Labs device specifications, the main difference is doubled Flash memory, not CPU speed or RAM capacity.
When should I choose EFM32TG222F16-QFP48T over EFM32TG222F32-QFP48T?
Choose EFM32TG222F16-QFP48T when the application image is expected to remain below 16 KB and a smaller embedded code footprint is valuable. Choose EFM32TG222F32-QFP48T when firmware growth, dual-bank features, or a more complex application makes 32 KB of Flash preferable. Both devices use the same 48-pin, 7 x 7 mm TQFP format and 32 MHz Cortex-M3 platform, so the decision should focus on memory requirements and firmware behavior rather than package size.
What is the best drop-in replacement for EFM32TG222F16-QFP48T?
EFM32TG222F32-QFP48T is the closest identified same-family drop-in candidate because it retains the 48-pin TQFP package, 32 MHz Cortex-M3 core, 4 KB RAM, 37 GPIO pins, and two 16-bit timers while doubling Flash from 16 KB to 32 KB. Before substitution, verify the complete pin map, power pins, oscillator configuration, peripheral mapping, and firmware requirements against the manufacturer datasheets for both devices.
Is the Silicon Labs EFM32TG222F16-QFP48T the same as an ATSAMD21G15B-AU?
No. The ATSAMD21G15B-AU is an ARM Cortex-M0+ device with 32 KB of Flash, while the EFM32TG222F16-QFP48T uses an ARM Cortex-M3 core with 16 KB of Flash. Both are associated with a 48-pin TQFP format, but matching package dimensions do not establish identical peripheral mapping, electrical behavior, or software compatibility. Treat it as a board-level design alternative rather than a verified register- and pin-compatible drop-in replacement.

엔지니어링 참조 데이터: EFM32TG222F16-QFP48T — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose EFM32TG222F16-QFP48T when a 32 MHz Cortex-M3 core, 16 KB Flash, 4 KB RAM, three integrated operational amplifiers, AES hardware, and 37 GPIO pins fit a compact low-power design. EFM32TG222F32-QFP48T is the preferred same-family choice when the firmware needs more code space; it doubles Flash to 32 KB without changing the stated CPU speed or RAM. EFM32ZG222F16-QFP48T retains 16 KB Flash and the 48-pin format but moves to Cortex-M0+, which may simplify some designs while requiring firmware and peripheral verification. EFM32HG222F32G-B-QFP48 offers 32 KB Flash but represents a different device family, so confirm its complete peripheral and pin mapping. ATSAMD21G15B-AU provides 32 KB Flash in a comparable 48-pin TQFP format, but its Cortex-M0+ core and different peripheral architecture make it a redesign candidate rather than an automatic substitute. For every alternative, compare the manufacturer pin table, supply requirements, oscillator arrangement, analog functions, and software support before releasing a replacement design.

대체품과의 비교

파라미터 이 제품 EFM32TG222F32-QFP48T EFM32TG222F16-QFP48 EFM32ZG222F16-QFP48T EFM32HG222F32G-B-QFP48 ATSAMD21G15B-AU
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Microchip Technology
Package 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP 48-pin TQFP 48-pin TQFP
Processor Core ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit ARM Cortex-M0+, 32-bit ARM Cortex-M3, 32-bit ARM Cortex-M0+, 32-bit
Flash Memory 16 KB 32 KB 16 KB 16 KB 32 KB 32 KB

주요 차별점

  • Higher Flash capacity in the closest same-family option (vs EFM32TG222F32-QFP48T)
  • Identical core speed and RAM within the EFM32TG222F16 family (vs EFM32TG222F16-QFP48)
  • Cortex-M3 processing core rather than Cortex-M0+ (vs ATSAMD21G15B-AU)
  • Compact integration of analog and security resources (vs EFM32ZG222F16-QFP48T)

설계 노트

The EFM32TG datasheet identifies Run-mode consumption of 150 uA/MHz and Stop-mode consumption as low as 0.6 uA. Budget the complete duty cycle rather than relying on the Stop-mode figure alone. Include MCU active time, sensor standby current, analog biasing, regulator quiescent current, and communication bursts in the average-power calculation. Confirm the minimum regulator headroom for each rail, especially when the device wakes from Stop mode and enables the analog peripherals.

Place all required input and output decoupling capacitors close to their associated supply pins, using the exact values and network shown in the manufacturer datasheet. Route the 48-pin TQFP perimeter carefully so analog inputs, oscillator connections, and sensitive sensing nodes remain away from high-current switching paths. Provide a continuous ground reference beneath and around the device, and inspect the design for thermal coupling between the three operational amplifiers, digital sections, and external power components.

Do not treat a shared TQFP-48 outline as proof that two MCUs are interchangeable. Compare every pin name, analog reference requirement, supply connection, oscillator option, debug interface, and peripheral instance before reusing a PCB. Firmware porting also requires checking startup code, interrupt vectors, memory-map addresses, peripheral registers, clock settings, and library support. A hardware fit check without this functional review can create boot failures or subtle peripheral mismatches.

Keep the three operational amplifiers near the sensors or signal sources they serve, and follow the datasheet guidance for analog reference and bypass components. Separate analog and digital return paths as far as practical, use compact ground connections at the MCU, and avoid routing high-speed or switching signals beneath sensitive analog inputs. If the internal amplifiers are used for gain, verify input common-mode range and output swing at the selected 1.85 V to 3.8 V supply condition before finalizing the schematic.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The device documentation confirms the EFM32TG family and its low-power operation, but the available manufacturer and distributor pages do not state the requested compliance statuses. Confirm declarations for the exact orderable MPN with Silicon Labs before procurement.

관련 검색

EFM32TG222F16-QFP48T EFM32TG222F16-QFP48T datasheet EFM32TG222F16-QFP48T datasheet pdf EFM32TG222F16-QFP48T pinout EFM32TG222F16-QFP48T specifications EFM32TG222F16-QFP48T price EFM32TG222F16-QFP48T stock Silicon Labs EFM32TG222F16-QFP48T EFM32TG222F16 QFP48 replacement EFM32TG222F16 vs EFM32TG222F32 EFM32TG222F16-QFP48T equivalent EFM32TG222F16-QFP48T footprint EFM32TG222F16-QFP48T application circuit 32 MHz Cortex-M3 16 KB Flash microcontroller 48 TQFP low power microcontroller

관련 부품 & 용어

Silicon Labs EFM32TG222F16-QFP48T EFM32TG222F32-QFP48T EFM32ZG222F16-QFP48T EFM32HG222F32G-B-QFP48 ATSAMD21G15B-AU ARM Cortex-M3 ARM Cortex-M0+ microcontroller MCU embedded controller semiconductor Tiny Gecko EFM32TG family 16 KB Flash memory 4 KB RAM 32 MHz processor AES hardware accelerator operational amplifier 37 digital I/O pins 48-pin TQFP 7 x 7 mm package surface mount low-power mode Stop mode IoT sensor node
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기