Silicon Labs

EFM32WG230F64-B-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs

部品番号: EFM32WG230F64-B-QFN64 ✗ 生産終了
1.98 V to 3.8 V Vdss 64-QFN, 9 x 9 mm Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

EFM32WG230F64-B-QFN64 概要

The Silicon Labs EFM32WG230F64-B-QFN64 is a 32-bit ARM Cortex-M4F microcontroller operating up to 48 MHz, with 64 KB of Flash memory and a 64-QFN 9 x 9 mm package. It belongs to the EFM32 Wonder Gecko family and combines DSP instruction support, a floating-point unit, energy-saving modes, and fast wake-up behavior for compact embedded systems.

An MCU is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. Microcontrollers sit within embedded processors and semiconductor systems, providing the central control logic for products such as industrial sensors, consumer devices, communications equipment, and battery-powered instruments. The EFM32WG230F64-B-QFN64 extends this hierarchy through the ARM Cortex-M4F core and the EFM32 low-power MCU platform.

Principal device features include a 48 MHz Cortex-M4F core, 64 KB of Flash, a 1.98 V to 3.8 V operating-supply range, and support for AES-related hardware functionality as identified for the corresponding EFM32WG230F64-QFN64 listing. Its 64-QFN package provides 56 digital I/O positions in the related EFM32G230 configuration and supports compact surface-mount PCB designs. The -B ordering designation is associated with tray packaging in the product listing.

The Cortex-M4F architecture adds single-precision floating-point and DSP capabilities to the general-purpose Cortex-M4 feature set. This makes the device useful for algorithms involving filtering, control calculations, sensor conditioning, and other workloads that benefit from efficient 32-bit arithmetic. Energy-saving modes and short wake-up times are especially valuable in duty-cycled products where the MCU spends substantial time sleeping between measurement or communication intervals.

Typical applications include low-power industrial sensor nodes, connected health accessories, compact motor and actuator controllers, wearable electronics, and communication equipment. The device can coordinate timers, serial interfaces, analog measurements, and communications peripherals in a single device. Firmware can move the MCU into a low-energy state between events and resume processing rapidly when an interrupt or peripheral event occurs.

PCB design should follow the manufacturer’s QFN pad, exposed-pad, and thermal-land instructions. The exposed thermal pad requires a designed copper area and the manufacturer-recommended solder pattern rather than being left as an isolated pad. Decoupling capacitors should be placed close to the supply and ground pins, and signal-routing constraints for high-speed or sensitive analog functions should be reviewed before layout release.

This page consolidates the exact device identity, core and memory ratings, package information, sourcing guidance, validated alternatives, and application-focused engineering guidance into a design-oriented reference for engineers evaluating the EFM32WG230F64-B-QFN64.

ドロップイン代替品: EFM32WG230F64-B-QFN64 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: EFM32WG230F64-B-QFN64 (同一形状・フットプリント) — 相違点: Hardware Encryption, Package.

Silicon Labs
Hardware Encryption: AES hardware accelerator
Package: 64-QFN (9 mm x 9 mm)
比較対象 EFM32WG230F64-B-QFN64 →

EFM32WG230F64-QFN64

✅ ドロップイン
Silicon Labs
📦 64-QFN (9x9)
32-bit ARM Cortex-M4F microcontroller · EFM32 Wonder Gecko · ARM Cortex-M4F · 48 MHz · 32-bit ARM · 64 KB · 64K x 8 bits · DSP instruction set

価格はお問い合わせください

データシートを見る →

EFM32WG230F64-B-QFN64 最大定格&電気的特性

Product Type 32-bit ARM Cortex-M4F microcontroller
Processor Core ARM Cortex-M4F
Maximum CPU Frequency 48 MHz
Instruction Width 32 bit
Flash Memory 64 KB
Flash Organization 64K x 8 bits
動作電源電圧 1.98 V to 3.8 V
Digital I/O Pins 56 pins in the related EFM32G230 configuration
Timers 3 x 16-bit timers in the related EFM32G230 configuration
Hardware Encryption AES support listed for EFM32WG230F64-QFN64
パッケージ 64-QFN, 9 x 9 mm
実装タイプ Surface mount
Shipping Format Tray
Product Series EFM32 Wonder Gecko
Core Architecture ARM Cortex-M4F with DSP instruction support and floating-point unit
Low-Power Features Energy-saving modes and fast wake-up
RoHS ステータス unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

EFM32WG230F64-B-QFN64 64-qfn, 9 x 9 mm ピン配置ガイド

EFM32WG230F64-B-QFN64 (64-qfn, 9 x 9 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

EFM32WG230F64-B-QFN64 の 64-qfn, 9 x 9 mm パッケージピン配置図

詳細なピン配置データはありません: EFM32WG230F64-B-QFN64.

詳細は データシート をご参照ください。

主な用途

EFM32WG230F64-B-QFN64 の用途: 6 件s: Low-Power Industrial Sensor Node, Battery-Powered Wearable Electronics, Connected Health and Diagnostic Accessory, Compact Motor and Actuator Controller, Wireless Communication Endpoint, Smart Home and IoT Control Module.

🏭

Low-Power Industrial Sensor Node

The EFM32WG230F64-B-QFN64 fits compact sensor nodes that periodically measure temperature, pressure, vibration, or environmental conditions. Its 48 MHz ARM Cortex-M4F core can perform filtering and compensation calculations with DSP instruction support and hardware floating-point capability, while 64 KB of Flash supports protocol handlers and application firmware. Energy-saving modes and fast wake-up behavior are valuable when the device sleeps between measurements. Use the 1.98 V to 3.8 V supply range to match the sensor network and regulate the 64-QFN device with the system power tree.

📱

Battery-Powered Wearable Electronics

The EFM32WG230F64-B-QFN64 is suitable for wearables and personal accessories where board area and battery life are constrained. The Cortex-M4F core provides 32-bit processing, DSP instructions, and hardware floating-point at up to 48 MHz, allowing sensor fusion and gesture algorithms to run without moving every calculation to a higher-power processor. Its low-energy modes support duty-cycled operation, and the 64-QFN 9 x 9 mm package preserves routing space in a dense wearable PCB. The 1.98 V to 3.8 V operating range also accommodates low-voltage battery-derived rails.

💊

Connected Health and Diagnostic Accessory

The EFM32WG230F64-B-QFN64 can manage compact health accessories that combine sensor acquisition, signal conditioning, and local data handling. Its 48 MHz Cortex-M4F core supports efficient digital filtering and control calculations, while the 64 KB Flash capacity can hold device firmware and communication routines. Energy-saving modes reduce average consumption in devices that transmit results intermittently, and fast wake-up helps the system respond promptly to sensor or user events. The 64-QFN package permits a small controller footprint, although medical-system qualification requirements must be assessed independently for the complete product.

🔧

Compact Motor and Actuator Controller

The EFM32WG230F64-B-QFN64 is suitable for compact motor, valve, and actuator controllers that require deterministic real-time control. The 48 MHz Cortex-M4F core can execute PID calculations and digital signal processing with hardware floating-point assistance, while 64 KB Flash provides room for control and safety routines. The device operates from 1.98 V to 3.8 V, allowing integration with low-voltage motor-driver circuitry. Use timer outputs for deterministic actuation timing and place the MCU close to its supply bypass network to limit switching noise on sensitive control signals.

🌐

Wireless Communication Endpoint

The EFM32WG230F64-B-QFN64 can serve as the control MCU in a compact wireless communication endpoint. Its 48 MHz Cortex-M4F architecture handles packet preparation, buffer management, and application logic while leaving the radio integrated on a separate communications device. DSP instructions and floating-point hardware improve the efficiency of filtering and protocol-related calculations. The 64-QFN 9 x 9 mm package leaves routing room for the radio and antenna interface, and the 1.98 V to 3.8 V supply range supports integration with common low-voltage radio platforms. RF layout and antenna design should remain separate from the MCU land-pattern review.

🧩

Smart Home and IoT Control Module

The EFM32WG230F64-B-QFN64 fits smart-home endpoints that monitor switches, environmental sensors, or actuator interfaces while maintaining low standby consumption. The Cortex-M4F core can execute local logic and protocol tasks at up to 48 MHz, and the energy-saving modes suit systems that wake on an external event rather than polling continuously. Its 64 KB Flash supports embedded firmware, while the 64-QFN package reduces the controller footprint on a densely populated module. The 1.98 V to 3.8 V operating range enables integration with low-voltage system rails, while the exposed-pad land pattern must follow the manufacturer’s thermal design guidance.

おすすめ製品の概要

EFM32WG230F64-QFN64 Silicon Labs 使用用途: Low-Power Industrial Sensor Node, Battery-Powered Wearable Electronics, Connected Health and Diagnostic Accessory, Compact Motor and Actuator Controller, Wireless Communication Endpoint, Smart Home and IoT Control Module EFM32WG230F64-B-QFN64R Same-family device identified with reel-ordering notation 使用用途: Low-Power Industrial Sensor Node, Battery-Powered Wearable Electronics, Connected Health and Diagnostic Accessory, Compact Motor and Actuator Controller, Wireless Communication Endpoint, Smart Home and IoT Control Module
What is the operating voltage of EFM32WG230F64-B-QFN64?
The EFM32WG230F64-B-QFN64 operates from 1.98 V to 3.8 V according to the Silicon Labs EFM32WG230 datasheet and its published device attributes. This range supports 2.5 V and 3.3 V designs, although each external peripheral must also tolerate the actual rail voltage. Confirm capacitor voltage ratings, pull-up levels, and sensor interfaces before committing the power architecture to a 3.3 V supply.
What is the CPU speed of EFM32WG230F64-B-QFN64?
The EFM32WG230F64-B-QFN64 runs at up to 48 MHz with an ARM Cortex-M4F processor core. According to the Silicon Labs EFM32WG230 datasheet, the core includes DSP instruction support and a floating-point unit, making it more suitable than a basic Cortex-M3 for filtering, control, and other numeric processing. The related EFM32G230F64-QFN64 is limited to 32 MHz and uses an ARM Cortex-M3.
How much Flash memory does EFM32WG230F64-B-QFN64 have?
The EFM32WG230F64-B-QFN64 contains 64 KB of Flash memory organized as 64K x 8 bits. According to the Silicon Labs EFM32WG230 datasheet, the WG230 family is intended for energy-conscious embedded applications. The available RAM quantity is not stated in the product listing, so verify that memory in the manufacturer device documentation before finalizing application size and firmware plans.
Where can I download the EFM32WG230F64-B-QFN64 datasheet PDF?
The EFM32WG230F64-B-QFN64 datasheet PDF can be downloaded from the Silicon Labs EFM32WG230 documentation hosted by Keil. The manufacturer document covers the WG230 family architecture, electrical characteristics, peripherals, package information, and operating guidance. Use the Silicon Labs EFM32WG230 documentation rather than a generic Gecko document when assessing this Cortex-M4F device.
Where can I find the EFM32WG230F64-B-QFN64 pinout?
The pin assignment for the EFM32WG230F64-B-QFN64 is found in the pinout and package tables of the Silicon Labs EFM32WG230 datasheet. The device uses a 64-QFN package measuring 9 x 9 mm. Use the exact WG230 pin-definition table to assign supply, ground, reset, debug, and peripheral signals; do not substitute the pin map of the Cortex-M3-based EFM32G230F64-QFN64.
What is the package of EFM32WG230F64-B-QFN64?
The EFM32WG230F64-B-QFN64 is supplied in a 64-QFN surface-mount package measuring 9 x 9 mm. According to the manufacturer device documentation, this is a tray-format ordering option designated by the -B suffix. Its exposed thermal pad must follow the recommended land pattern and thermal-via arrangement, and the PCB stencil should be based on the manufacturer package drawing.
Where can I buy EFM32WG230F64-B-QFN64 online?
Use the Request a Quote form on this page to request EFM32WG230F64-B-QFN64 pricing, stock confirmation, and lead time. The exact ordering code identifies the tray-format 64-QFN device, so include the complete MPN in the request. Firmware support, temperature grade, quantity, and delivery schedule can be confirmed with that quotation before the production order is placed.
What is the price of EFM32WG230F64-B-QFN64?
Use the Request a Quote form on this page for the current EFM32WG230F64-B-QFN64 price and quantity breaks. The form supports procurement checks against the exact tray-format ordering code without presenting a potentially stale static price. Include your annual usage, target delivery date, and shipment destination so the commercial response reflects the intended build schedule.
What is the lead time for EFM32WG230F64-B-QFN64?
Request the current EFM32WG230F64-B-QFN64 lead time through the Request a Quote form on this page. Lead time depends on exact part availability, order quantity, packaging requirements, and the requested delivery schedule. For production planning, provide your consumption forecast and target date to the quotation team so scheduling can be evaluated against the complete device ordering code.
Is EFM32WG230F64-B-QFN64 in stock?
Stock status for the exact EFM32WG230F64-B-QFN64 should be confirmed through the Request a Quote form on this page. The complete ordering code denotes the tray-format 64-QFN configuration, so quote requests should avoid substituting EFM32WG230F64-QFN64R or another package variant. Provide your required quantity and schedule to obtain a current availability response.
What can replace EFM32WG230F64-B-QFN64?
The closest validated same-family replacement is EFM32WG230F64-QFN64, which retains the 48 MHz Cortex-M4F core, 64 KB Flash, 1.98 V to 3.8 V supply range, and 64-QFN 9 x 9 mm footprint. However, ordering suffixes can change the shipping format, so verify tray-versus-reel requirements and complete peripheral compatibility before treating it as a drop-in replacement.
Is EFM32G230F64-QFN64 a drop-in replacement for EFM32WG230F64-B-QFN64?
The EFM32G230F64-QFN64 is not a safe drop-in replacement for the EFM32WG230F64-B-QFN64 because it uses a 32 MHz ARM Cortex-M3 core instead of the target’s 48 MHz Cortex-M4F core. Although both devices are EFM32 Gecko-family 64-QFN devices with 64 KB Flash, the processor, floating-point capability, and peripheral details differ. A PCB or firmware migration review is required.
When should I choose EFM32WG230F64-B-QFN64 over the EFM32G230F64-QFN64?
Choose the EFM32WG230F64-B-QFN64 when firmware requires the 48 MHz Cortex-M4F core, DSP instruction support, or hardware floating-point capability. The EFM32G230F64-QFN64 uses a 32 MHz Cortex-M3 and therefore does not provide the same numeric-processing features. Both are associated with a 64-QFN 9 x 9 mm package, but matching the package alone does not make them functionally interchangeable.
EFM32WG230F64-B-QFN64 vs EFM32WG230F64-QFN64: which should I select?
Select the EFM32WG230F64-B-QFN64 when the assembly process requires the listed tray-format shipping option. The EFM32WG230F64-QFN64 provides the same core family, 48 MHz operating speed, 64 KB Flash, 1.98 V to 3.8 V supply range, and 64-QFN 9 x 9 mm footprint. Confirm the ordering suffix, packaging format, and component availability with a quotation before PCB assembly.
What are the key specifications of EFM32WG230F64-B-QFN64?
The EFM32WG230F64-B-QFN64 combines a 48 MHz ARM Cortex-M4F core, 64 KB Flash, a 1.98 V to 3.8 V supply range, and a 64-QFN 9 x 9 mm package. According to the Silicon Labs EFM32WG230 datasheet, the family also supports DSP instructions, floating-point arithmetic, energy-saving modes, and fast wake-up. Those attributes position it for compact, low-power embedded applications requiring efficient numeric control.
Is the EFM32WG230F64-B-QFN64 RoHS compliant?
The RoHS status of the EFM32WG230F64-B-QFN64 is not established by the manufacturer product information available for this page. Treat the compliance field as unknown until the manufacturer declaration or material-compliance report for the exact ordering code is obtained. The same caution applies to REACH, lead-free, halogen-free, and conflict-minerals declarations; do not infer them solely from the package or product family.

エンジニアリング参考データ: EFM32WG230F64-B-QFN64 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the EFM32WG230F64-B-QFN64 for a compact embedded design that requires a 48 MHz ARM Cortex-M4F core, hardware floating-point, DSP instructions, 64 KB Flash, and a 64-QFN 9 x 9 mm footprint. It is particularly suitable for low-power sensor nodes, wearable accessories, connected health devices, and compact control modules that use energy-saving modes. Choose EFM32WG230F64-QFN64 when its ordering suffix and shipment format better match the assembly plan, since the listed core, memory, supply range, and package match. Do not select the EFM32G230F64-QFN64 as a drop-in substitute without a migration review: its Cortex-M3 core runs at 32 MHz and lacks the target’s Cortex-M4F feature set. Before release, verify the exact pin map, RAM capacity, peripheral configuration, exposed-pad layout, and ordering code in the manufacturer documentation.

代替品との比較

パラメータ この製品 EFM32WG230F64-QFN64
Brand Silicon Labs Silicon Labs
Package 64-QFN (9x9 mm) 64-QFN (9x9 mm)
Processor Core ARM Cortex-M4F ARM Cortex-M4F
Maximum CPU Frequency 48 MHz 48 MHz
Flash Memory 64 KB 64 KB
Operating Supply Voltage 1.98 V to 3.8 V 1.98 V to 3.8 V
Digital Signal Processing DSP instruction support and hardware floating-point unit DSP instruction support and hardware floating-point unit
Low-Power Operation Energy-saving modes and fast wake-up Energy-saving modes and fast wake-up

主な差別化要因

  • Higher-performance processor core (vs EFM32G230F64-QFN64)
  • Matching family option for footprint validation (vs EFM32WG230F64-QFN64)
  • Low-power architecture for embedded workloads (vs EFM32G230F64-QFN64)

設計ノート

Use the manufacturer’s exact 64-QFN land pattern and exposed-pad geometry for PCB footprint creation. The exposed thermal pad should connect to the recommended ground or thermal construction specified in the EFM32WG230 datasheet. Place the input bypass capacitor beside the relevant supply and ground pins and minimize the loop area to reduce switching disturbance. Do not reuse the EFM32G230 footprint without checking its pad dimensions and pin definitions.

Treat the exposed pad as the primary path for heat transfer into the PCB. Follow the manufacturer’s recommended copper area and thermal-via arrangement rather than relying on a nominal QFN land pattern alone. Review the final board stack-up, enclosure temperature, and worst-case processor activity during thermal analysis. The exposed-pad connection and via pattern must comply with the assembly process because excessive voiding can materially reduce heat-transfer performance.

Design the 1.98 V to 3.8 V supply rail so it remains within the device’s operating range across tolerance, startup, load transients, and temperature. Place local bypass capacitance at the supply pins and route it through short ground paths. If the system shares the rail with switching converters or radio circuitry, verify startup behavior and filtering margins in the complete power tree. Confirm peripheral voltage ratings before using a 3.3 V rail.

Do not substitute the Cortex-M3-based EFM32G230F64-QFN64 for this Cortex-M4F device solely because both use 64-QFN packages. The 32 MHz versus 48 MHz core difference and the floating-point and DSP feature set make them functionally different choices. Likewise, do not interchange -B and -R ordering suffixes without confirming the required shipping format. Review the complete ordering code and the WG230 pin and peripheral tables before approving a substitution.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No exact ordering-code compliance declaration was identified. Obtain the manufacturer’s material-compliance documentation before making a compliance claim.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

EFM32WG230F64-B-QFN64 EFM32WG230F64-B-QFN64 datasheet EFM32WG230F64-B-QFN64 datasheet pdf EFM32WG230F64-B-QFN64 pinout EFM32WG230F64-B-QFN64 specifications EFM32WG230F64-B-QFN64 footprint EFM32WG230F64-B-QFN64 replacement EFM32WG230F64-B-QFN64 equivalent EFM32WG230F64-B-QFN64 vs EFM32WG230F64-QFN64 Silicon Labs EFM32WG230F64-B-QFN64 EFM32WG230F64-B-QFN64 price EFM32WG230F64-B-QFN64 stock 48 MHz Cortex-M4F 64-QFN MCU 64 KB Flash low power MCU EFM32WG230F64-B-QFN64 application circuit

関連部品&用語

Silicon Labs EFM32WG230F64-B-QFN64 EFM32WG230F64-QFN64 EFM32WG230F64-B-QFN64R EFM32G230F64-QFN64 EFM32 Wonder Gecko ARM Cortex-M4F ARM Cortex-M3 microcontroller MCU embedded processor semiconductor digital signal processing hardware floating-point unit 64 KB Flash memory 64-QFN package QFN family surface mount SMD 1.98 V to 3.8 V supply energy-saving modes fast wake-up industrial sensor node wearable electronics
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示