EFM32WG230F64-B-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs
부품 번호: EFM32WG230F64-B-QFN64 ✗ 단종EFM32WG230F64-B-QFN64 개요
An MCU is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. Microcontrollers sit within embedded processors and semiconductor systems, providing the central control logic for products such as industrial sensors, consumer devices, communications equipment, and battery-powered instruments. The EFM32WG230F64-B-QFN64 extends this hierarchy through the ARM Cortex-M4F core and the EFM32 low-power MCU platform.
Principal device features include a 48 MHz Cortex-M4F core, 64 KB of Flash, a 1.98 V to 3.8 V operating-supply range, and support for AES-related hardware functionality as identified for the corresponding EFM32WG230F64-QFN64 listing. Its 64-QFN package provides 56 digital I/O positions in the related EFM32G230 configuration and supports compact surface-mount PCB designs. The -B ordering designation is associated with tray packaging in the product listing.
The Cortex-M4F architecture adds single-precision floating-point and DSP capabilities to the general-purpose Cortex-M4 feature set. This makes the device useful for algorithms involving filtering, control calculations, sensor conditioning, and other workloads that benefit from efficient 32-bit arithmetic. Energy-saving modes and short wake-up times are especially valuable in duty-cycled products where the MCU spends substantial time sleeping between measurement or communication intervals.
Typical applications include low-power industrial sensor nodes, connected health accessories, compact motor and actuator controllers, wearable electronics, and communication equipment. The device can coordinate timers, serial interfaces, analog measurements, and communications peripherals in a single device. Firmware can move the MCU into a low-energy state between events and resume processing rapidly when an interrupt or peripheral event occurs.
PCB design should follow the manufacturer’s QFN pad, exposed-pad, and thermal-land instructions. The exposed thermal pad requires a designed copper area and the manufacturer-recommended solder pattern rather than being left as an isolated pad. Decoupling capacitors should be placed close to the supply and ground pins, and signal-routing constraints for high-speed or sensitive analog functions should be reviewed before layout release.
This page consolidates the exact device identity, core and memory ratings, package information, sourcing guidance, validated alternatives, and application-focused engineering guidance into a design-oriented reference for engineers evaluating the EFM32WG230F64-B-QFN64.
드롭인 대체품: EFM32WG230F64-B-QFN64 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EFM32WG230F64-B-QFN64 (동일 폼 팩터 및 풋프린트) — 차이점: Hardware Encryption, Package.
EFM32WG230F64-QFN64
✅ 드롭인가격 문의
데이터시트 보기 →EFM32WG230F64-B-QFN64 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Processor Core | ARM Cortex-M4F |
| Maximum CPU Frequency | 48 MHz |
| Instruction Width | 32 bit |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| 동작 공급 전압 | 1.98 V to 3.8 V |
| Digital I/O Pins | 56 pins in the related EFM32G230 configuration |
| Timers | 3 x 16-bit timers in the related EFM32G230 configuration |
| Hardware Encryption | AES support listed for EFM32WG230F64-QFN64 |
| 패키지 | 64-QFN, 9 x 9 mm |
| 실장 유형 | Surface mount |
| Shipping Format | Tray |
| Product Series | EFM32 Wonder Gecko |
| Core Architecture | ARM Cortex-M4F with DSP instruction support and floating-point unit |
| Low-Power Features | Energy-saving modes and fast wake-up |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
EFM32WG230F64-B-QFN64 64-qfn, 9 x 9 mm 핀 구성 가이드
EFM32WG230F64-B-QFN64(64-qfn, 9 x 9 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EFM32WG230F64-B-QFN64.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EFM32WG230F64-B-QFN64 적합 용도: 6 애플리케이션s: Low-Power Industrial Sensor Node, Battery-Powered Wearable Electronics, Connected Health and Diagnostic Accessory, Compact Motor and Actuator Controller, Wireless Communication Endpoint, Smart Home and IoT Control Module.
Low-Power Industrial Sensor Node
The EFM32WG230F64-B-QFN64 fits compact sensor nodes that periodically measure temperature, pressure, vibration, or environmental conditions. Its 48 MHz ARM Cortex-M4F core can perform filtering and compensation calculations with DSP instruction support and hardware floating-point capability, while 64 KB of Flash supports protocol handlers and application firmware. Energy-saving modes and fast wake-up behavior are valuable when the device sleeps between measurements. Use the 1.98 V to 3.8 V supply range to match the sensor network and regulate the 64-QFN device with the system power tree.
추천
Battery-Powered Wearable Electronics
The EFM32WG230F64-B-QFN64 is suitable for wearables and personal accessories where board area and battery life are constrained. The Cortex-M4F core provides 32-bit processing, DSP instructions, and hardware floating-point at up to 48 MHz, allowing sensor fusion and gesture algorithms to run without moving every calculation to a higher-power processor. Its low-energy modes support duty-cycled operation, and the 64-QFN 9 x 9 mm package preserves routing space in a dense wearable PCB. The 1.98 V to 3.8 V operating range also accommodates low-voltage battery-derived rails.
추천
Connected Health and Diagnostic Accessory
The EFM32WG230F64-B-QFN64 can manage compact health accessories that combine sensor acquisition, signal conditioning, and local data handling. Its 48 MHz Cortex-M4F core supports efficient digital filtering and control calculations, while the 64 KB Flash capacity can hold device firmware and communication routines. Energy-saving modes reduce average consumption in devices that transmit results intermittently, and fast wake-up helps the system respond promptly to sensor or user events. The 64-QFN package permits a small controller footprint, although medical-system qualification requirements must be assessed independently for the complete product.
추천
Compact Motor and Actuator Controller
The EFM32WG230F64-B-QFN64 is suitable for compact motor, valve, and actuator controllers that require deterministic real-time control. The 48 MHz Cortex-M4F core can execute PID calculations and digital signal processing with hardware floating-point assistance, while 64 KB Flash provides room for control and safety routines. The device operates from 1.98 V to 3.8 V, allowing integration with low-voltage motor-driver circuitry. Use timer outputs for deterministic actuation timing and place the MCU close to its supply bypass network to limit switching noise on sensitive control signals.
추천
Wireless Communication Endpoint
The EFM32WG230F64-B-QFN64 can serve as the control MCU in a compact wireless communication endpoint. Its 48 MHz Cortex-M4F architecture handles packet preparation, buffer management, and application logic while leaving the radio integrated on a separate communications device. DSP instructions and floating-point hardware improve the efficiency of filtering and protocol-related calculations. The 64-QFN 9 x 9 mm package leaves routing room for the radio and antenna interface, and the 1.98 V to 3.8 V supply range supports integration with common low-voltage radio platforms. RF layout and antenna design should remain separate from the MCU land-pattern review.
추천
Smart Home and IoT Control Module
The EFM32WG230F64-B-QFN64 fits smart-home endpoints that monitor switches, environmental sensors, or actuator interfaces while maintaining low standby consumption. The Cortex-M4F core can execute local logic and protocol tasks at up to 48 MHz, and the energy-saving modes suit systems that wake on an external event rather than polling continuously. Its 64 KB Flash supports embedded firmware, while the 64-QFN package reduces the controller footprint on a densely populated module. The 1.98 V to 3.8 V operating range enables integration with low-voltage system rails, while the exposed-pad land pattern must follow the manufacturer’s thermal design guidance.
추천
추천 제품 요약
엔지니어링 참조 데이터: EFM32WG230F64-B-QFN64 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EFM32WG230F64-QFN64 |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9x9 mm) | 64-QFN (9x9 mm) |
| Processor Core | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB |
| Operating Supply Voltage | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
| Digital Signal Processing | DSP instruction support and hardware floating-point unit | DSP instruction support and hardware floating-point unit |
| Low-Power Operation | Energy-saving modes and fast wake-up | Energy-saving modes and fast wake-up |
주요 차별점
- Higher-performance processor core (vs EFM32G230F64-QFN64)
- Matching family option for footprint validation (vs EFM32WG230F64-QFN64)
- Low-power architecture for embedded workloads (vs EFM32G230F64-QFN64)
설계 노트
Use the manufacturer’s exact 64-QFN land pattern and exposed-pad geometry for PCB footprint creation. The exposed thermal pad should connect to the recommended ground or thermal construction specified in the EFM32WG230 datasheet. Place the input bypass capacitor beside the relevant supply and ground pins and minimize the loop area to reduce switching disturbance. Do not reuse the EFM32G230 footprint without checking its pad dimensions and pin definitions.
Treat the exposed pad as the primary path for heat transfer into the PCB. Follow the manufacturer’s recommended copper area and thermal-via arrangement rather than relying on a nominal QFN land pattern alone. Review the final board stack-up, enclosure temperature, and worst-case processor activity during thermal analysis. The exposed-pad connection and via pattern must comply with the assembly process because excessive voiding can materially reduce heat-transfer performance.
Design the 1.98 V to 3.8 V supply rail so it remains within the device’s operating range across tolerance, startup, load transients, and temperature. Place local bypass capacitance at the supply pins and route it through short ground paths. If the system shares the rail with switching converters or radio circuitry, verify startup behavior and filtering margins in the complete power tree. Confirm peripheral voltage ratings before using a 3.3 V rail.
Do not substitute the Cortex-M3-based EFM32G230F64-QFN64 for this Cortex-M4F device solely because both use 64-QFN packages. The 32 MHz versus 48 MHz core difference and the floating-point and DSP feature set make them functionally different choices. Likewise, do not interchange -B and -R ordering suffixes without confirming the required shipping format. Review the complete ordering code and the WG230 pin and peripheral tables before approving a substitution.
규정 준수 정보
No exact ordering-code compliance declaration was identified. Obtain the manufacturer’s material-compliance documentation before making a compliance claim.