EP20K200RC208-1 - APEX 20K 200K Gates FPGA, 208-Pin RQFP | Intel / Altera
部品番号: EP20K200RC208-1 ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $145 | $145.00 |
| 10 | $128 | $1,280.00 |
| 100 | $110 | $11,000.00 |
| 500 | $92 | $46,000.00 |
| 1,000 | $78 | $78,000.00 |
EP20K200RC208-1 概要
A Field-Programmable Gate Array is a programmable logic device that combines configurable logic blocks (LUTs), programmable interconnect, and dedicated memory into a single silicon die. The APEX-20K family pioneered the MultiCore architecture that integrates look-up table logic, product-term logic, and embedded memory blocks on one die, enabling system-on-a-programmable-chip (SOPC) integration. FPGAs sit above fixed-function ASICs and below software-defined processors in the programmable logic hierarchy, and the APEX-20K sits within Altera's mid-density legacy FPGA portfolio alongside the FLEX 10K and APEX II families.
Key features of the EP20K200RC208-1 include 144 maximum user I/O pins, four phase-locked loops (PLLs) for clock management, embedded array blocks (EABs) for memory and arithmetic, and in-system programmability via the IEEE 1149.1 JTAG interface. The device supports configuration through passive serial, passive parallel asynchronous, and synchronous modes, and is supported by the Quartus II (legacy) and MAX+PLUS II development tools. The exposed thermal pad on the bottom of the 208-BFQFP package enables direct heat extraction to a PCB copper pour.
Typical applications for the EP20K200RC208-1 include telecommunications line cards, ASIC prototyping, glue logic consolidation, custom DSP datapaths, bus-interface bridges (PCI, PCIX, Utopia), and industrial control state machines. Designers typically select this part for cost-sensitive mid-volume designs where the APEX-20K's MultiCore architecture and embedded memory density provide an attractive balance of logic capacity, on-chip RAM, and unit price.
When designing with the EP20K200RC208-1, follow the Quartus II power analysis flow and observe the 1.8 V LVDS I/O standard voltage limits. Multi-voltage rail sequencing (2.5 V core + 3.3 V/2.5 V I/O) is required, and the JTAG TMS/TCK pins must each have a 1 kΩ pull-up or pull-down to prevent erroneous configuration. Long-term availability for this EOL family should be confirmed with the manufacturer before new designs.
ドロップイン代替品: EP20K200RC208-1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP20K200RC208-1 （同一形状・フットプリント） — 相違点: Family, Process Technology, Operating Temperature, Package, Speed Grade.
クイック比較ツール — 並列比較する代替部品を選択:
EP20K200RC208-1X
✅ ドロップイン✓ 在庫あり
$35.8 / 個
データシートを見る →EP20K200RC208-1V
✅ ドロップイン📋 参考代替品（カタログ未掲載）
EP20K200EQC208-1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
EP20K200EQC208-2
✅ ドロップイン📋 参考代替品（カタログ未掲載）
EP20K200QC208-1N
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
EP20K200RC208-1 最大定格＆電気的特性
| Family | APEX-20K |
| Series | APEX 20K (200K gates) |
| System Gates | 200,000 |
| Logic Elements / Cells | 8,320 |
| Embedded Memory (bits) | 106,496 |
| Maximum User I/O | 144 |
| Number of PLLs | 4 |
| Process Technology | 0.22 µm CMOS |
| Core Supply Voltage | 2.5 V |
| I/O Standard Support | LVTTL, LVCMOS, 2.5 V/3.3 V PCI, 1.8 V LVDS |
| Maximum Internal Frequency | 250 MHz |
| パッケージ | 208-BFQFP (RQFP) with Exposed Pad, 28×28 mm |
| 実装タイプ | Surface Mount |
| Configuration Interface | Passive Serial, Passive Parallel, JTAG (IEEE 1149.1) |
| 動作温度 | Industrial range |
| RoHS ステータス | unknown |
EP20K200RC208-1 208-bfqfp (rqfp) with exposed pad, 28×28 mm ピン配置ガイド
EP20K200RC208-1 (208-bfqfp (rqfp) with exposed pad, 28×28 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP20K200RC208-1.
詳細は データシート をご参照ください。
主な用途
EP20K200RC208-1 の用途: 6 件s: Telecommunications Line Cards, ASIC Prototyping and Emulation, Custom DSP Datapaths, PCI/PCI-X Bus Interface Bridges, Industrial Control and State-Machine Consolidation, Legacy Network Equipment Maintenance.
Telecommunications Line Cards
The EP20K200RC208-1's 200K system gates, four on-chip PLLs, and 106,496 bits of embedded SRAM suit it well to telecom line-card datapath consolidation. MultiCore architecture lets designers implement both look-up-table logic and product-term glue on the same die, while the LVDS-capable I/O supports 1.8 V SERDES interfaces and 3.3 V/2.5 V PCI bus bridging to framer ASICs. Place the part adjacent to its companion line-card transceiver; observe the 28×28 mm 208-BFQFP exposed-pad solder coverage to keep junction temperature within the industrial range when running at 250 MHz internal clock.
おすすめ
ASIC Prototyping and Emulation
Engineers historically used the EP20K200RC208-1 as a prototyping vehicle for ASICs in the 100K-200K gate range, exploiting its MultiCore LUT + product-term mix to emulate target logic accurately. With 8,320 logic elements and 144 user I/O, the device can map most mid-complexity ASICs and provide JTAG-driven debug visibility. The 250 MHz internal frequency supports realistic timing emulation of mid-speed ASIC blocks; instantiate multiple devices in parallel for larger gate-count emulation farms and connect via LVDS to preserve signal integrity at high toggle rates.
おすすめ
Custom DSP Datapaths
The APEX-20K's embedded array blocks (EABs) double as RAM or ROM and are particularly efficient at implementing MAC multipliers and FIR filter coefficient tables, making the EP20K200RC208-1 a useful platform for custom DSP datapaths. With 106,496 bits of SRAM, designers can buffer several hundred samples of intermediate data without resorting to external SRAM. The 250 MHz internal frequency supports sample rates up to ~50 MSPS per channel in a 5-tap FIR; the four PLLs generate the clocks for the ADC, DSP fabric, and output DAC.
おすすめ
PCI/PCI-X Bus Interface Bridges
The EP20K200RC208-1 supports 3.3 V PCI and PCI-X I/O standards directly, making it suitable for bridging legacy processor buses to PCI-X peripherals or backplanes. The 208-BFQFP package provides enough user I/O to implement a 64-bit PCI-X interface plus local-bus signaling, while the four PLLs de-skew the 66 MHz PCI-X clock against the local processor clock. The 200K-gate logic capacity fits a typical bus-bridge design with FIFOs and DMA engines; verify the PCI timing budgets with Quartus II timing analysis before tape-out.
おすすめ
Industrial Control and State-Machine Consolidation
Many industrial control designs use the EP20K200RC208-1 to consolidate dozens of discrete 74HC logic ICs, GALs, and small PLDs into a single programmable device. The APEX-20K's product-term blocks naturally encode large state machines and decoders, while the LUT fabric absorbs the random glue logic. Industrial-temperature-grade parts tolerate factory-floor thermal and electrical noise, and the exposed thermal pad of the 208-BFQFP package couples heat into the PCB copper pour for fanless operation in sealed cabinets.
おすすめ
Legacy Network Equipment Maintenance
The EP20K200RC208-1 was widely designed into 1999-2005 era routers, switches, and base-station controllers that remain in service today. The part's last-time-buy status means new builds must rely on Rochester Electronics franchise stock, but board-repair depots and refurbishment operations need exact-fit replacements. The 208-BFQFP RQFP footprint matches the original PCB land pattern, so a swap requires only a standard hot-air rework station. Verify the temperature grade (industrial vs. commercial) and the JTAG chain position before substituting.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP20K200RC208-1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP20K200RC208-1X | EP20K200RC208-1V | EP20K200EQC208-1 | EP20K200EQC208-2 | EP20K200QC208-1N |
|---|---|---|---|---|---|---|
| Package | 208-BFQFP (RQFP) 28×28 mm with Exposed Pad | 208-BFQFP (RQFP) - same | 208-BFQFP (RQFP) - same | 208-BFQFP (RQFP) - same | 208-BFQFP (RQFP) - same | 208-BFQFP (RQFP) - same |
| Brand | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) |
| Family | APEX-20K (2.5V core) | APEX-20K (2.5V core) | APEX-20K (2.5V core) | APEX 20KE (1.8V core) | APEX 20KE (1.8V core) | APEX-20K (2.5V core) |
| System Gates | 200,000 | 200,000 | 200,000 | 200,000 | 200,000 | 200,000 |
| Logic Elements | 8,320 | 8,320 | 8,320 | 8,320 | 8,320 | 8,320 |
| Embedded Memory (bits) | 106,496 | 106,496 | 106,496 | 106,496 | 106,496 | 106,496 |
| Max User I/O | 144 | 144 | 144 | 144 | 144 | 144 |
| Number of PLLs | 4 | 4 | 4 | 4 | 4 | 4 |
主な差別化要因
- 208-pin RQFP package with exposed thermal pad enables direct PCB heat extraction （vs EP20K200QC208-1N (non-ETP variant))
- Last-time-buy availability through Rochester Electronics franchise （vs EP20K200EQC208-1 (APEX 20KE 1.8V variant))
- 200,000 system gates with MultiCore LUT + product-term + EAB mix （vs Smaller Cyclone III (EP3C5))
設計ノート
The APEX-20K requires multiple supply rails: a 2.5 V core (VCCINT) and a 2.5 V/3.3 V I/O rail (VCCIO), plus VREF for voltage-referenced I/O standards like GTL+. Sequence the core rail BEFORE the I/O rail to avoid I/O driving into unpowered buffers, which can latch-up the device. Add bulk decoupling of at least 100 µF low-ESR tantalum plus 0.1 µF X7R ceramic on every VCC pin pair; for the 208-BFQFP package, place the bulk caps on the underside of the PCB directly under the exposed thermal pad to minimize loop inductance. Estimated: at 250 MHz internal activity and ~50% toggle rate, expect Icc_int around 200-400 mA; de-rate for actual design utilization.
The 208-BFQFP package has an exposed thermal pad (ETP) that MUST be soldered to the PCB land pattern for both electrical ground and thermal conduction. For industrial-temperature designs, follow the Altera 208-pin RQFP thermal design guide: provide a copper pour area of at least 1.5 square inches on the top layer tied to the ETP, plus thermal vias in a 4×4 array (0.3 mm hole, 0.5 mm pitch). Without this thermal path, the device cannot dissipate the 1.5-3 W typical power dissipation and will throttle or trigger thermal shutdown at elevated ambient temperatures.
JTAG configuration pins (TMS, TCK, TDI, TDO) and configuration control pins (nCONFIG, nSTATUS, CONF_DONE) require careful PCB layout. Add 1 kΩ pull-up resistors on nCONFIG and a 10 kΩ pull-up on nSTATUS per the APEX-20K configuration handbook; pull TCK down through 1 kΩ to prevent noise-induced boundary-scan operation. Place the configuration PROM (EPC16 or EPC8) within 3 inches of the FPGA data lines to avoid signal-integrity issues; use 4-layer PCB with continuous VCCINT and GND planes for noise-sensitive analog/mixed-signal designs.
コンプライアンス情報
Standard -1 variant is leaded / non-RoHS; the EP20K200RC208-1X suffix marks the RoHS-compliant re-issue per the FindIC comparison entry. Compliance fields marked unknown because the provided data does not explicitly list them.
