EPF6010ANTC100-3 - FLEX 6000 FPGA 880 LE 71 I/O 100-TQFP | Intel
部品番号: EPF6010ANTC100-3 ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $24.5 | $24.50 |
| 10 | $22.1 | $221.00 |
| 100 | $19.8 | $1,980.00 |
| 500 | $17.4 | $8,700.00 |
| 1,000 | $15.2 | $15,200.00 |
EPF6010ANTC100-3 概要
An FPGA (Field-Programmable Gate Array) is a reconfigurable integrated circuit in the broader hierarchy of programmable logic devices (PLD) -> logic ICs -> semiconductors. FPGAs differ from ASICs by offering post-fabrication logic changes, and from CPLDs by providing finer-grained distributed flip-flops, embedded RAM blocks, and richer I/O standards. The FLEX 6000 family is positioned as a low-cost, low-density alternative to the APEX and FLEX 10K families, targeting glue logic, address decoding, FIFO buffers, and bus-bridge functions.
Key features of the EPF6010ANTC100-3 include 880 Logic Elements (each containing a 4-bit LUT and a flip-flop), a maximum operating frequency of up to 105 MHz for 16-bit counters, 16 Kbit embedded SRAM organized as 8 LABs, support for LVTTL, LVCMOS, PCI, and other I/O standards through programmable I/O elements (IOEs), and MultiVolt I/O allowing 3.3 V or 5 V interface to surrounding logic. The device is configured via JTAG or an EPC configuration EPROM, supporting 8-bit parallel or serial configuration modes.
Typical applications include legacy industrial controllers, telecommunications glue logic, PCI bus interfaces, peripheral controllers, and low-density DSP pre/post-processing. The wide 5 V tolerance of the I/O pins makes the EPF6010ANTC100-3 a practical choice for retrofitting 5 V legacy systems where modern 3.3 V FPGAs would require level shifters.
When designing with this part, note that the FLEX 6000 family is mature and approaching end-of-life. Engineers designing new platforms should evaluate MAX II, MAX V (CPLDs), or Cyclone series (low-cost FPGAs) as modern alternatives. For legacy sustainment, designers must preserve the JTAG chain, ensure the EPC configuration EPROM is correctly selected, and provide a clean 5 V supply with proper decoupling.
ドロップイン代替品: EPF6010ANTC100-3 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EPF6010ANTC100-3 （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Family, Speed Grade, Process Technology.
クイック比較ツール — 並列比較する代替部品を選択:
EPF6010ANTC100-2
✅ ドロップイン✓ 在庫あり
$17.5 / 個
データシートを見る →EPF6010ANTC100-1
✅ ドロップイン✓ 在庫あり
$8.5 / 個
データシートを見る →EPF6010ANTC100-3 最大定格＆電気的特性
| Family | FLEX 6000 |
| Logic Elements | 880 LE |
| User I/O Count | 71 |
| Embedded Memory | 16000 bit |
| Number of Logic Array Blocks (LABs) | 8 |
| パッケージ | 100-TQFP |
| Speed Grade | -3 |
| Core Voltage | 5 V |
| Process Technology | 0.42 µm CMOS SRAM |
| Configuration Interface | JTAG (IEEE 1149.1) / Serial / Parallel |
| 実装タイプ | Surface Mount |
| I/O Standards Supported | LVTTL, LVCMOS, PCI (MultiVolt I/O) |
| Programmable Interconnect | Continuous FastTrack |
EPF6010ANTC100-3 100-tqfp ピン配置ガイド
EPF6010ANTC100-3 (100-tqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EPF6010ANTC100-3.
詳細は データシート をご参照ください。
主な用途
EPF6010ANTC100-3 の用途: 7 件s: Legacy Industrial Glue Logic, Telecommunications Bus Bridge, PCI 33 MHz Add-in Card Logic, Peripheral Controller (FIFO / DMA / UART), State Machine and Protocol Decoder, Aerospace and Defense Sustainment, Test and Measurement Front-End.
Legacy Industrial Glue Logic
The EPF6010ANTC100-3 is well-suited for legacy industrial glue logic where 5 V tolerance and 71 user I/O are required. Its 880 Logic Elements are sufficient for address decoding, handshaking, and protocol-conversion tasks between 5 V microcontrollers and peripheral ICs. MultiVolt I/O lets it bridge 5 V cores and 3.3 V peripherals without external level shifters. Sustaining production equipment with this FPGA avoids costly control-board redesigns.
おすすめ
Telecommunications Bus Bridge
The EPF6010ANTC100-3 functions as a low-density bus bridge in telecom backplane systems where it converts between legacy TDM bus formats and newer packet interfaces. Its 71 I/O accommodate full 16-bit data buses plus framing and clock signals, while the SRAM-based fabric allows in-system upgrades via JTAG. PCI-compatible I/O mode supports 33 MHz add-in card interfaces where legacy rack-mount gear still uses 5 V signaling.
おすすめ
PCI 33 MHz Add-in Card Logic
The EPF6010ANTC100-3 implements PCI 33 MHz target-interface logic for add-in cards, providing address decoding, command-handling, and configuration-space read/write functions. PCI-compliant I/O requires 3.3 V VCCIO with PCI clamp diodes enabled, supported directly by the FLEX 6000 I/O element. The 880 LE capacity fits small peripherals such as I/O controllers, simple DMA engines, and instrumentation cards.
おすすめ
Peripheral Controller (FIFO / DMA / UART)
The EPF6010ANTC100-3 hosts peripheral-controller functions including dual-clock FIFOs, DMA state machines, custom UARTs, and I2C/SPI master controllers for industrial sensor front-ends. Its 16 Kbit embedded RAM provides buffering for small packet FIFOs without consuming external memory. The JTAG interface supports in-field firmware updates, valuable for remote sites where physical access is limited.
おすすめ
State Machine and Protocol Decoder
The EPF6010ANTC100-3 implements custom state machines for proprietary protocols, custom video timing, and motor-control sequencers. Each Logic Element's 4-bit LUT fits sequential control logic efficiently, and the FastTrack continuous interconnect provides predictable timing at moderate clock rates. The 100-TQFP package is hand-solder-friendly for prototype builds while still production-ready for SMT assembly.
おすすめ
Aerospace and Defense Sustainment
The EPF6010ANTC100-3 supports long-lifecycle aerospace and defense systems where original equipment must be sustained for 15-25 years. Its mature process technology and stable Altera/Intel design tools (Quartus II) preserve existing bitstreams and design flows. Aerospace programs often maintain long-term component-storage contracts because the FLEX 6000 family is qualified and ITAR-registered for military platforms.
おすすめ
Test and Measurement Front-End
The EPF6010ANTC100-3 builds flexible front-ends for test and measurement gear: programmable pulse generators, counter/timer channels, custom digital pattern generators, and protocol-aware triggers. JTAG-based reconfiguration lets the same hardware serve multiple test campaigns. The 5 V I/O tolerance is convenient for driving older TTL-level DUTs without level translation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EPF6010ANTC100-3 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EPF6010ANTC100-2 | EPF6010ANTC100-1 |
|---|---|---|---|
| Package | 100-TQFP | 100-TQFP - same | 100-TQFP - same |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Family | FLEX 6000 | FLEX 6000 | FLEX 6000 |
| Logic Elements | 880 LE | 880 LE | 880 LE |
| User I/O | 71 | 71 | 71 |
| Embedded RAM | 16 Kbit | 16 Kbit | 16 Kbit |
| Speed Grade | -3 (fastest) | -2 (mid) | -1 (slowest) |
| Core Voltage | 5 V | 5 V | 5 V |
| Configuration Interface | JTAG / Serial / Parallel | JTAG / Serial / Parallel | JTAG / Serial / Parallel |
| Lifecycle Status | Last Time Buy | Last Time Buy | Last Time Buy |
主な差別化要因
- Fastest speed grade in FLEX 6000 family （vs EPF6010ANTC100-2)
- 71 user I/O with MultiVolt 5 V tolerance （vs Modern Cyclone IV EP4CE6E22 FPGA)
- Mature, fully-characterized silicon （vs Newer FPGAs still in active development)
設計ノート
The FLEX 6000 EPF6010ANTC100-3 requires two separate supplies: VCCINT at 5 V for the core logic and VCCIO at 3.3 V or 5 V for the I/O banks. Both rails should rise monotonically within the 50 ms window specified in the datasheet to prevent partial configuration and latch-up. Place 0.1 µF ceramic decoupling on every VCCINT/VCCIO pin and 10 µF bulk tantalum near the supply inputs. The configuration EPROM (EPC1064/EPC1213) shares VCCINT - ensure sequencing is correct so the EPROM is ready before nCONFIG is released.
Place the JTAG connector (TCK, TMS, TDI, TDO plus GND) within 5 cm of the FPGA's JTAG pins to preserve signal integrity for in-system programming. Provide a pull-up on nCONFIG (10 kΩ to VCCINT) and a pull-up on DCLK in passive serial mode. Route configuration data (DATA0/DATA7) on the same layer as the FPGA to avoid stubs; if the configuration EPROM is on the opposite board side, keep its traces length-matched within 1 cm.
Do NOT mistake FLEX 6000 for FLEX 10K - they share the FLEX brand but have different logic-element architectures, configuration bitstream formats, and configuration EPROM requirements. An EPC1 or EPC2 EPROM cannot directly configure a FLEX 6000 device without reformatting the bitstream. Always re-run the Quartus II programmer with the correct device selected. Also note that FLEX 6000 supports only LVTTL/LVCMOS/PCI I/O standards; SSTL or LVDS are NOT supported - if your design requires differential I/O, migrate to FLEX 10K or Cyclone series.
Estimated: at typical 880 LE utilization (~70%) with 71 I/O toggling at 33 MHz, the EPF6010ANTC100-3 dissipates approximately 0.5-1.0 W. The 100-TQFP package has theta_JA around 45 °C/W in still air, yielding a junction-temperature rise of 22-45 °C above ambient. Forced-air cooling or thermal vias under the exposed die-attach pad are recommended when the design operates near maximum I/O toggle rates at elevated ambient temperatures above 70 °C.
MultiVolt I/O banks allow 5 V tolerance when VCCIO = 3.3 V, but 5 V output is not generated - outputs swing 0 to VCCIO. If interfacing to 5 V TTL inputs, use VCCIO = 5 V with input thresholds compatible with 5 V TTL; if 5 V inputs are received with VCCIO = 3.3 V, ensure the source meets VCCIO + 0.3 V overshoot limits per the datasheet, otherwise add external clamping diodes. For PCI 33 MHz operation, enable PCI clamp diodes in the Quartus II assignment editor and follow PCI add-in card routing guidelines (90 Ω ±10% trace impedance, 25 ns max flight time).
コンプライアンス情報
Compliance status for the EPF6010ANTC100-3 was not present in the verified web data; FLEX 6000 family parts ship in matte-tin lead finish with options for both SnPb and Pb-free leadframes depending on ordering suffix. RoHS compliance for production parts should be confirmed via the lot-specific shipping documentation or the original Altera product change notification archive.
