EPF6010ANTC100-3 - FLEX 6000 FPGA 880 LE 71 I/O 100-TQFP | Intel
Référence : EPF6010ANTC100-3 ⚠ Dernier achat| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $24.5 | $24,50 |
| 10 | $22.1 | $221,00 |
| 100 | $19.8 | $1 980,00 |
| 500 | $17.4 | $8 700,00 |
| 1 000 | $15.2 | $15 200,00 |
EPF6010ANTC100-3 Présentation
An FPGA (Field-Programmable Gate Array) is a reconfigurable integrated circuit in the broader hierarchy of programmable logic devices (PLD) -> logic ICs -> semiconductors. FPGAs differ from ASICs by offering post-fabrication logic changes, and from CPLDs by providing finer-grained distributed flip-flops, embedded RAM blocks, and richer I/O standards. The FLEX 6000 family is positioned as a low-cost, low-density alternative to the APEX and FLEX 10K families, targeting glue logic, address decoding, FIFO buffers, and bus-bridge functions.
Key features of the EPF6010ANTC100-3 include 880 Logic Elements (each containing a 4-bit LUT and a flip-flop), a maximum operating frequency of up to 105 MHz for 16-bit counters, 16 Kbit embedded SRAM organized as 8 LABs, support for LVTTL, LVCMOS, PCI, and other I/O standards through programmable I/O elements (IOEs), and MultiVolt I/O allowing 3.3 V or 5 V interface to surrounding logic. The device is configured via JTAG or an EPC configuration EPROM, supporting 8-bit parallel or serial configuration modes.
Typical applications include legacy industrial controllers, telecommunications glue logic, PCI bus interfaces, peripheral controllers, and low-density DSP pre/post-processing. The wide 5 V tolerance of the I/O pins makes the EPF6010ANTC100-3 a practical choice for retrofitting 5 V legacy systems where modern 3.3 V FPGAs would require level shifters.
When designing with this part, note that the FLEX 6000 family is mature and approaching end-of-life. Engineers designing new platforms should evaluate MAX II, MAX V (CPLDs), or Cyclone series (low-cost FPGAs) as modern alternatives. For legacy sustainment, designers must preserve the JTAG chain, ensure the EPC configuration EPROM is correctly selected, and provide a clean 5 V supply with proper decoupling.
Alternatives de remplacement direct pour EPF6010ANTC100-3 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EPF6010ANTC100-3 (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, Family, Speed Grade, Process Technology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EPF6010ANTC100-2
✅ Remplacement direct✓ En stock
$17.5 / unité
Voir la fiche technique →EPF6010ANTC100-1
✅ Remplacement direct✓ En stock
$8.5 / unité
Voir la fiche technique →EPF6010ANTC100-3 Valeurs maximales et caractéristiques électriques
| Family | FLEX 6000 |
| Logic Elements | 880 LE |
| User I/O Count | 71 |
| Embedded Memory | 16000 bit |
| Number of Logic Array Blocks (LABs) | 8 |
| Boîtier | 100-TQFP |
| Speed Grade | -3 |
| Core Voltage | 5 V |
| Process Technology | 0.42 µm CMOS SRAM |
| Configuration Interface | JTAG (IEEE 1149.1) / Serial / Parallel |
| Type de montage | Surface Mount |
| I/O Standards Supported | LVTTL, LVCMOS, PCI (MultiVolt I/O) |
| Programmable Interconnect | Continuous FastTrack |
Guide de configuration des broches du EPF6010ANTC100-3 100-tqfp
Configuration des broches du EPF6010ANTC100-3 (boîtier 100-tqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EPF6010ANTC100-3.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EPF6010ANTC100-3 convient pour 7 applications: Legacy Industrial Glue Logic, Telecommunications Bus Bridge, PCI 33 MHz Add-in Card Logic, Peripheral Controller (FIFO / DMA / UART), State Machine and Protocol Decoder, Aerospace and Defense Sustainment, Test and Measurement Front-End.
Legacy Industrial Glue Logic
The EPF6010ANTC100-3 is well-suited for legacy industrial glue logic where 5 V tolerance and 71 user I/O are required. Its 880 Logic Elements are sufficient for address decoding, handshaking, and protocol-conversion tasks between 5 V microcontrollers and peripheral ICs. MultiVolt I/O lets it bridge 5 V cores and 3.3 V peripherals without external level shifters. Sustaining production equipment with this FPGA avoids costly control-board redesigns.
Recommandé
Telecommunications Bus Bridge
The EPF6010ANTC100-3 functions as a low-density bus bridge in telecom backplane systems where it converts between legacy TDM bus formats and newer packet interfaces. Its 71 I/O accommodate full 16-bit data buses plus framing and clock signals, while the SRAM-based fabric allows in-system upgrades via JTAG. PCI-compatible I/O mode supports 33 MHz add-in card interfaces where legacy rack-mount gear still uses 5 V signaling.
Recommandé
PCI 33 MHz Add-in Card Logic
The EPF6010ANTC100-3 implements PCI 33 MHz target-interface logic for add-in cards, providing address decoding, command-handling, and configuration-space read/write functions. PCI-compliant I/O requires 3.3 V VCCIO with PCI clamp diodes enabled, supported directly by the FLEX 6000 I/O element. The 880 LE capacity fits small peripherals such as I/O controllers, simple DMA engines, and instrumentation cards.
Recommandé
Peripheral Controller (FIFO / DMA / UART)
The EPF6010ANTC100-3 hosts peripheral-controller functions including dual-clock FIFOs, DMA state machines, custom UARTs, and I2C/SPI master controllers for industrial sensor front-ends. Its 16 Kbit embedded RAM provides buffering for small packet FIFOs without consuming external memory. The JTAG interface supports in-field firmware updates, valuable for remote sites where physical access is limited.
Recommandé
State Machine and Protocol Decoder
The EPF6010ANTC100-3 implements custom state machines for proprietary protocols, custom video timing, and motor-control sequencers. Each Logic Element's 4-bit LUT fits sequential control logic efficiently, and the FastTrack continuous interconnect provides predictable timing at moderate clock rates. The 100-TQFP package is hand-solder-friendly for prototype builds while still production-ready for SMT assembly.
Recommandé
Aerospace and Defense Sustainment
The EPF6010ANTC100-3 supports long-lifecycle aerospace and defense systems where original equipment must be sustained for 15-25 years. Its mature process technology and stable Altera/Intel design tools (Quartus II) preserve existing bitstreams and design flows. Aerospace programs often maintain long-term component-storage contracts because the FLEX 6000 family is qualified and ITAR-registered for military platforms.
Recommandé
Test and Measurement Front-End
The EPF6010ANTC100-3 builds flexible front-ends for test and measurement gear: programmable pulse generators, counter/timer channels, custom digital pattern generators, and protocol-aware triggers. JTAG-based reconfiguration lets the same hardware serve multiple test campaigns. The 5 V I/O tolerance is convenient for driving older TTL-level DUTs without level translation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EPF6010ANTC100-3 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EPF6010ANTC100-2 | EPF6010ANTC100-1 |
|---|---|---|---|
| Package | 100-TQFP | 100-TQFP - same | 100-TQFP - same |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Family | FLEX 6000 | FLEX 6000 | FLEX 6000 |
| Logic Elements | 880 LE | 880 LE | 880 LE |
| User I/O | 71 | 71 | 71 |
| Embedded RAM | 16 Kbit | 16 Kbit | 16 Kbit |
| Speed Grade | -3 (fastest) | -2 (mid) | -1 (slowest) |
| Core Voltage | 5 V | 5 V | 5 V |
| Configuration Interface | JTAG / Serial / Parallel | JTAG / Serial / Parallel | JTAG / Serial / Parallel |
| Lifecycle Status | Last Time Buy | Last Time Buy | Last Time Buy |
Principaux différenciateurs
- Fastest speed grade in FLEX 6000 family (vs EPF6010ANTC100-2)
- 71 user I/O with MultiVolt 5 V tolerance (vs Modern Cyclone IV EP4CE6E22 FPGA)
- Mature, fully-characterized silicon (vs Newer FPGAs still in active development)
Notes de conception
The FLEX 6000 EPF6010ANTC100-3 requires two separate supplies: VCCINT at 5 V for the core logic and VCCIO at 3.3 V or 5 V for the I/O banks. Both rails should rise monotonically within the 50 ms window specified in the datasheet to prevent partial configuration and latch-up. Place 0.1 µF ceramic decoupling on every VCCINT/VCCIO pin and 10 µF bulk tantalum near the supply inputs. The configuration EPROM (EPC1064/EPC1213) shares VCCINT - ensure sequencing is correct so the EPROM is ready before nCONFIG is released.
Place the JTAG connector (TCK, TMS, TDI, TDO plus GND) within 5 cm of the FPGA's JTAG pins to preserve signal integrity for in-system programming. Provide a pull-up on nCONFIG (10 kΩ to VCCINT) and a pull-up on DCLK in passive serial mode. Route configuration data (DATA0/DATA7) on the same layer as the FPGA to avoid stubs; if the configuration EPROM is on the opposite board side, keep its traces length-matched within 1 cm.
Do NOT mistake FLEX 6000 for FLEX 10K - they share the FLEX brand but have different logic-element architectures, configuration bitstream formats, and configuration EPROM requirements. An EPC1 or EPC2 EPROM cannot directly configure a FLEX 6000 device without reformatting the bitstream. Always re-run the Quartus II programmer with the correct device selected. Also note that FLEX 6000 supports only LVTTL/LVCMOS/PCI I/O standards; SSTL or LVDS are NOT supported - if your design requires differential I/O, migrate to FLEX 10K or Cyclone series.
Estimated: at typical 880 LE utilization (~70%) with 71 I/O toggling at 33 MHz, the EPF6010ANTC100-3 dissipates approximately 0.5-1.0 W. The 100-TQFP package has theta_JA around 45 °C/W in still air, yielding a junction-temperature rise of 22-45 °C above ambient. Forced-air cooling or thermal vias under the exposed die-attach pad are recommended when the design operates near maximum I/O toggle rates at elevated ambient temperatures above 70 °C.
MultiVolt I/O banks allow 5 V tolerance when VCCIO = 3.3 V, but 5 V output is not generated - outputs swing 0 to VCCIO. If interfacing to 5 V TTL inputs, use VCCIO = 5 V with input thresholds compatible with 5 V TTL; if 5 V inputs are received with VCCIO = 3.3 V, ensure the source meets VCCIO + 0.3 V overshoot limits per the datasheet, otherwise add external clamping diodes. For PCI 33 MHz operation, enable PCI clamp diodes in the Quartus II assignment editor and follow PCI add-in card routing guidelines (90 Ω ±10% trace impedance, 25 ns max flight time).
Informations de conformité
Compliance status for the EPF6010ANTC100-3 was not present in the verified web data; FLEX 6000 family parts ship in matte-tin lead finish with options for both SnPb and Pb-free leadframes depending on ordering suffix. RoHS compliance for production parts should be confirmed via the lot-specific shipping documentation or the original Altera product change notification archive.
