FGE576QAAMD - Wi-Fi 7 + BT 5.3 Triple-Band Module | Quectel
部品番号: FGE576QAAMD ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $16.85 | $16.85 |
| 10 | $15.42 | $154.20 |
| 100 | $13.78 | $1,378.00 |
| 500 | $12.55 | $6,275.00 |
| 1,000 | $11.4 | $11,400.00 |
FGE576QAAMD 概要
A Wi-Fi 7 module belongs to the IEEE 802.11be family of wireless transceivers and sits within the broader hierarchy of short-range wireless modules -> wireless modules -> RF & Wireless -> electronic component. Wi-Fi 7 (802.11be) introduces 320 MHz channels, 4K-QAM, multi-link operation (MLO), and multi-resource unit (MRU) features that materially improve throughput, latency, and spectrum efficiency compared to Wi-Fi 6/6E. Bluetooth 5.3 adds LE Audio, isochronous channels, and connection subrating for power-efficient audio streaming, making combined Wi-Fi 7 + BT 5.3 modules the reference connectivity solution for next-generation gateways, AIoT edge devices, and premium consumer electronics.
Key differentiating features of the FGE576QAAMD include: triple-band 2.4/5/6 GHz support (vs dual-band on most Wi-Fi 6 modules), 4K-QAM which adds two bits per symbol versus 1024-QAM, 160 MHz channel bandwidth for high-throughput operation, multi-link operation for simultaneous multi-band aggregation, and integrated Bluetooth 5.3 with BLE Long Range. Together these specifications enable AR/VR offload, 8K video streaming, real-time cloud gaming, and Matter-over-Wi-Fi commissioning in a single silicon footprint.
Architecturally, the FGE576QAAMD integrates a 2x2 MIMO RF front end, baseband processor, MAC, and power-management circuits in a single shielded module package. The module exposes an SDIO or PCIe host interface depending on firmware configuration, and the antenna-not-included variant allows OEM antenna tuning for end-product certifications (FCC, CE, MIC, NCC, etc.).
Typical applications include Wi-Fi 7 home gateways and mesh nodes, premium AIoT hubs with edge inference, AR/VR streaming gateways, 4K/8K wireless display dongles, smart-home Matter bridges, and industrial gateways needing low-latency wireless backhaul. The triple-band capability is most useful when the 6 GHz spectrum is locally available (US, EU regions under 6E/7 rules) because the 2.4 GHz + 6 GHz combination provides low interference for high-throughput links.
When designing with this module, note that the antenna-not-included variant requires the integrator to source, tune, and certify an external antenna chain. Most regions require radiated testing on the final integrated product; Quectel provides an antenna reference design in the FGE576Q hardware design guide. Confirm regulatory status with Quectel regional support for the target market.
This page synthesizes distributor stock, drop-in module alternatives, and design considerations not present in the manufacturer datasheet.
ドロップイン代替品: FGE576QAAMD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: FGE576QAAMD （同一形状・フットプリント） — 相違点: Frequency Bands, Mounting Type, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
FGE576QAAM
✅ ドロップイン📋 参考代替品（カタログ未掲載）
FGE576QAAMD-Q
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
FGE576QAAMD 仕様（メーカー公開）
| Module Type | Wi-Fi 7 + Bluetooth 5.3 short-range transceiver module |
| Wi-Fi Standard | IEEE 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7) |
| Bluetooth Version | Bluetooth 5.3 (BLE, BLE Long Range, Multi-Link Operation) |
| Frequency Bands | 2.4 GHz, 5 GHz, 6 GHz (triple-band) |
| Channel Bandwidth | Up to 160 MHz |
| Modulation | 4K-QAM, 1024-QAM, 256-QAM, etc. |
| Max PHY Data Rate | 3.6 Gbps |
| Dual-Band Simultaneous (DBS) | 2.4 GHz + 5 GHz and 2.4 GHz + 6 GHz |
| Multi-Link Operation (MLO) | Supported |
| Antenna | Not included (external antenna required) |
| 実装タイプ | Surface Mount (LGA / SiP) |
| MIMO Configuration | 2x2 |
| RoHS ステータス | Compliant |
FGE576QAAMD インターフェースとコネクタ
FGE576QAAMD は、メーカーが公開している以下のインターフェースとコネクタを備えています: ワイヤレス, Bluetooth。拡張ヘッダーのピン配置、コネクタのピン番号、電気的制限はメーカーのドキュメントで定義されています。
| ワイヤレス | IEEE 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7) |
| Bluetooth | Bluetooth 5.3 (BLE, BLE Long Range, Multi-Link Operation) |
詳細は メーカー資料 をご参照ください（拡張ヘッダーのピン配置とコネクタのピン番号の詳細）。
主な用途
FGE576QAAMD の用途: 6 件s: Wi-Fi 7 Home Gateways and Mesh Nodes, AR/VR Streaming Gateways, Premium AIoT Edge Hubs, Wireless Display Dongles and Set-Top Boxes, Matter-over-Wi-Fi Smart Home Bridges, Industrial Wireless Gateways and Telematics.
Wi-Fi 7 Home Gateways and Mesh Nodes
The FGE576QAAMD is purpose-built for next-generation residential gateways where Wi-Fi 7 throughput and 6 GHz band availability materially improve whole-home wireless performance. With 3.6 Gbps PHY rate, 160 MHz channels, and 4K-QAM, the module backhauls mesh nodes at near-wired speeds, eliminating throughput bottlenecks that limit Wi-Fi 6 systems. Dual-band simultaneous 2.4 GHz + 6 GHz operation lets the gateway serve legacy 2.4 GHz IoT devices while pushing high-throughput traffic onto the uncongested 6 GHz band. Drop the FGE576QAAMD onto the gateway PCB with an external 2x2 antenna chain and an SDIO/PCIe link to the host SoC.
おすすめ
AR/VR Streaming Gateways
The FGE576QAAMD's Wi-Fi 7 multi-link operation (MLO) and sub-millisecond latency make it a strong fit for AR/VR offload gateways that stream 4K/8K video and pose data to head-mounted displays. With 4K-QAM and 160 MHz channels, the module delivers the >1.5 Gbps sustained throughput required for uncompressed 4K VR at 90 Hz, while MLO aggregates multiple bands to suppress motion-induced packet loss. Per Quectel FGE576Q documentation, the module supports ultra-low latency for real-time response, which is essential for motion-to-photon budgets under 20 ms.
おすすめ
Premium AIoT Edge Hubs
The FGE576QAAMD gives AIoT edge hubs a wireless uplink capable of streaming multi-megabit sensor fusion and inference telemetry to the cloud without becoming the throughput bottleneck. With Wi-Fi 7 + Bluetooth 5.3 in one silicon footprint, the module supports both high-throughput cloud links and BLE commissioning of nearby Matter/Thread devices, simplifying BOM and PCB real estate. The triple-band 2.4/5/6 GHz coverage is particularly useful in enterprise environments where 6 GHz band availability reduces interference from legacy 2.4 GHz Wi-Fi 4/5 networks. Quectel recommends pairing the FGE576QAAMD with a host SoC running edge ML inference.
おすすめ
Wireless Display Dongles and Set-Top Boxes
The FGE576QAAMD powers wireless display dongles that mirror 4K/8K video from a host PC or set-top box to a TV over a Wi-Fi 7 link. With 160 MHz channels and 4K-QAM, the module sustains the >800 Mbps throughput required for compressed 4K HDR60 streams while leaving headroom for upstream touch/voice traffic. The Bluetooth 5.3 sub-system also handles the dongle's BLE remote control and voice-assistant wake-word paths in parallel. According to the Quectel FGE576Q specification, the module's low-latency mode is specifically tuned for streaming workloads where frame pacing is critical.
おすすめ
Matter-over-Wi-Fi Smart Home Bridges
The FGE576QAAMD serves as the Wi-Fi + Bluetooth radio in Matter-over-Wi-Fi bridges that commission and control smart-home devices across multiple ecosystems. Bluetooth 5.3 with BLE Long Range handles commissioning of nearby battery-powered devices up to 100 m line-of-sight, while the Wi-Fi 7 radio maintains the high-throughput uplink to the home router. Triple-band support ensures the bridge can coexist with other Wi-Fi 7 APs in dense deployments without channel contention. The LGA surface-mount footprint simplifies integration into compact bridge enclosures.
おすすめ
Industrial Wireless Gateways and Telematics
Industrial gateways and telematics hubs leverage the FGE576QAAMD to backhaul telemetry, video, and SCADA traffic over Wi-Fi 7 to a plant network or cloud. With 3.6 Gbps PHY throughput, the module handles aggregated sensor streams plus on-site video surveillance from IP cameras, while Bluetooth 5.3 serves as a low-power local commissioning interface for technicians. Industrial temperature range requirements must be verified against the Quectel FGE576Q datasheet operating specs before deployment in unconditioned environments. Per the Quectel FGE576Q documentation, the module targets commercial-grade applications by default.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: FGE576QAAMD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | FGE576QAAM | FGE576QAAMD-Q |
|---|---|---|---|
| Brand | Quectel | Quectel | Quectel |
| Package | LGA SiP (FGE576Q family) | LGA SiP (FGE576Q family) - same | LGA SiP (FGE576Q family) - same |
| Wi-Fi Standard | Wi-Fi 7 (802.11be) | Wi-Fi 7 (802.11be) | Wi-Fi 7 (802.11be) |
| Bluetooth Version | Bluetooth 5.3 | Bluetooth 5.3 | Bluetooth 5.3 |
| Frequency Bands | 2.4 / 5 / 6 GHz (triple-band) | 2.4 / 5 / 6 GHz (triple-band) | 2.4 / 5 / 6 GHz (triple-band) |
| Max PHY Data Rate | 3.6 Gbps | 3.6 Gbps | 3.6 Gbps |
| Multi-Link Operation (MLO) | Yes | Yes | Yes |
| Antenna | Not included | Onboard chip antenna | Not included |
| RoHS Compliance | Compliant | Compliant | Compliant |
主な差別化要因
- Triple-band 2.4/5/6 GHz coverage including 6 GHz （vs FCM561A (Quectel Wi-Fi 6 dual-band module))
- Wi-Fi 7 (802.11be) silicon with MLO and 4K-QAM （vs FGE576QAAM (same silicon, antenna-onboard))
- 3.6 Gbps maximum PHY data rate （vs Wi-Fi 6 modules (1.2 Gbps max PHY))
設計ノート
Place the FGE576QAAMD at the corner of the host PCB with the antenna feed lines routed straight to the edge connector or u.FL footprint. Keep the LGA thermal/ground pads soldered to a continuous ground pour with at least 8 thermal vias to the inner ground plane. Maintain a 50 ohm controlled-impedance trace for the RF feed and avoid routing digital signals beneath the module footprint. Per the Quectel FGE576Q hardware design guide, keep the antenna keep-out zone (no copper, no ground pour) at least 5 mm clearance around the external antenna pad to avoid detuning.
The FGE576QAAMD draws peak currents in the 1.0-1.4 A range during Wi-Fi 7 4K-QAM transmission bursts, so a low-noise 3.3 V LDO with at least 1.5 A headroom is required. Place a 22 uF bulk capacitor and a 0.1 uF decoupling capacitor within 2 mm of the module's power pads to suppress transient droop. Avoid sharing the module's 3.3 V rail with digital subsystems that inject switching noise - per the Quectel FGE576Q specification, RF performance (EVM, throughput) degrades measurably when power-rail ripple exceeds 50 mVpp.
Do not substitute the FGE576QAAMD (antenna not included) for the FGE576QAAM (with onboard antenna) without verifying the host PCB antenna chain - the onboard-antenna variant has no RF pad exposed and assumes a chip antenna is integrated on the module substrate. Confirm regulatory certification status in your target market before deployment; Wi-Fi 7 6 GHz operation requires FCC 6E/7 or CE 6 GHz allocation depending on region. Per the Quectel FGE576Q documentation, radiated testing on the final integrated host is mandatory because module-level certifications do not transfer to modified end products.
コンプライアンス情報
RoHS and REACH compliance stated by Quectel product page. Not AEC-Q100 qualified (commercial-grade module). Regional certifications (FCC ID, CE, MIC, NCC) depend on end-product antenna integration and integrator-side testing.
