FGE576QAAMD - Wi-Fi 7 + BT 5.3 Triple-Band Module | Quectel
MPN： FGE576QAAMD ✓ 啟用中FGE576QAAMD 概覽
A Wi-Fi 7 module belongs to the IEEE 802.11be family of wireless transceivers and sits within the broader hierarchy of short-range wireless modules -> wireless modules -> RF & Wireless -> electronic component. Wi-Fi 7 (802.11be) introduces 320 MHz channels, 4K-QAM, multi-link operation (MLO), and multi-resource unit (MRU) features that materially improve throughput, latency, and spectrum efficiency compared to Wi-Fi 6/6E. Bluetooth 5.3 adds LE Audio, isochronous channels, and connection subrating for power-efficient audio streaming, making combined Wi-Fi 7 + BT 5.3 modules the reference connectivity solution for next-generation gateways, AIoT edge devices, and premium consumer electronics.
Key differentiating features of the FGE576QAAMD include: triple-band 2.4/5/6 GHz support (vs dual-band on most Wi-Fi 6 modules), 4K-QAM which adds two bits per symbol versus 1024-QAM, 160 MHz channel bandwidth for high-throughput operation, multi-link operation for simultaneous multi-band aggregation, and integrated Bluetooth 5.3 with BLE Long Range. Together these specifications enable AR/VR offload, 8K video streaming, real-time cloud gaming, and Matter-over-Wi-Fi commissioning in a single silicon footprint.
Architecturally, the FGE576QAAMD integrates a 2x2 MIMO RF front end, baseband processor, MAC, and power-management circuits in a single shielded module package. The module exposes an SDIO or PCIe host interface depending on firmware configuration, and the antenna-not-included variant allows OEM antenna tuning for end-product certifications (FCC, CE, MIC, NCC, etc.).
Typical applications include Wi-Fi 7 home gateways and mesh nodes, premium AIoT hubs with edge inference, AR/VR streaming gateways, 4K/8K wireless display dongles, smart-home Matter bridges, and industrial gateways needing low-latency wireless backhaul. The triple-band capability is most useful when the 6 GHz spectrum is locally available (US, EU regions under 6E/7 rules) because the 2.4 GHz + 6 GHz combination provides low interference for high-throughput links.
When designing with this module, note that the antenna-not-included variant requires the integrator to source, tune, and certify an external antenna chain. Most regions require radiated testing on the final integrated product; Quectel provides an antenna reference design in the FGE576Q hardware design guide. Confirm regulatory status with Quectel regional support for the target market.
This page synthesizes distributor stock, drop-in module alternatives, and design considerations not present in the manufacturer datasheet.
直接替換替代品，適用於 FGE576QAAMD — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： FGE576QAAMD （相同外形與佔位） — 差異在於 Frequency Bands, Mounting Type, RoHS Status.
FGE576QAAM
✅ 直接替換📋 參考替代品（不在目錄中）
FGE576QAAMD-Q
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
FGE576QAAMD 規格（製造商公布）
| Module Type | Wi-Fi 7 + Bluetooth 5.3 short-range transceiver module |
| Wi-Fi Standard | IEEE 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7) |
| Bluetooth Version | Bluetooth 5.3 (BLE, BLE Long Range, Multi-Link Operation) |
| Frequency Bands | 2.4 GHz, 5 GHz, 6 GHz (triple-band) |
| Channel Bandwidth | Up to 160 MHz |
| Modulation | 4K-QAM, 1024-QAM, 256-QAM, etc. |
| Max PHY Data Rate | 3.6 Gbps |
| Dual-Band Simultaneous (DBS) | 2.4 GHz + 5 GHz and 2.4 GHz + 6 GHz |
| Multi-Link Operation (MLO) | Supported |
| Antenna | Not included (external antenna required) |
| 安裝類型 | Surface Mount (LGA / SiP) |
| MIMO Configuration | 2x2 |
| RoHS 狀態 | Compliant |
FGE576QAAMD 介面與連接器
FGE576QAAMD 依製造商公布提供以下介面與連接器：無線, 藍牙。擴充排針腳位、連接器腳位編號與電氣限制均定義於製造商文件中。
| 無線 | IEEE 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7) |
| 藍牙 | Bluetooth 5.3 (BLE, BLE Long Range, Multi-Link Operation) |
請參閱 製造商文件 以取得完整的擴充排針腳位定義與連接器腳位編號。
典型應用
FGE576QAAMD 適用於 6 應用s: Wi-Fi 7 Home Gateways and Mesh Nodes, AR/VR Streaming Gateways, Premium AIoT Edge Hubs, Wireless Display Dongles and Set-Top Boxes, Matter-over-Wi-Fi Smart Home Bridges, Industrial Wireless Gateways and Telematics.
Wi-Fi 7 Home Gateways and Mesh Nodes
The FGE576QAAMD is purpose-built for next-generation residential gateways where Wi-Fi 7 throughput and 6 GHz band availability materially improve whole-home wireless performance. With 3.6 Gbps PHY rate, 160 MHz channels, and 4K-QAM, the module backhauls mesh nodes at near-wired speeds, eliminating throughput bottlenecks that limit Wi-Fi 6 systems. Dual-band simultaneous 2.4 GHz + 6 GHz operation lets the gateway serve legacy 2.4 GHz IoT devices while pushing high-throughput traffic onto the uncongested 6 GHz band. Drop the FGE576QAAMD onto the gateway PCB with an external 2x2 antenna chain and an SDIO/PCIe link to the host SoC.
推薦
AR/VR Streaming Gateways
The FGE576QAAMD's Wi-Fi 7 multi-link operation (MLO) and sub-millisecond latency make it a strong fit for AR/VR offload gateways that stream 4K/8K video and pose data to head-mounted displays. With 4K-QAM and 160 MHz channels, the module delivers the >1.5 Gbps sustained throughput required for uncompressed 4K VR at 90 Hz, while MLO aggregates multiple bands to suppress motion-induced packet loss. Per Quectel FGE576Q documentation, the module supports ultra-low latency for real-time response, which is essential for motion-to-photon budgets under 20 ms.
推薦
Premium AIoT Edge Hubs
The FGE576QAAMD gives AIoT edge hubs a wireless uplink capable of streaming multi-megabit sensor fusion and inference telemetry to the cloud without becoming the throughput bottleneck. With Wi-Fi 7 + Bluetooth 5.3 in one silicon footprint, the module supports both high-throughput cloud links and BLE commissioning of nearby Matter/Thread devices, simplifying BOM and PCB real estate. The triple-band 2.4/5/6 GHz coverage is particularly useful in enterprise environments where 6 GHz band availability reduces interference from legacy 2.4 GHz Wi-Fi 4/5 networks. Quectel recommends pairing the FGE576QAAMD with a host SoC running edge ML inference.
推薦
Wireless Display Dongles and Set-Top Boxes
The FGE576QAAMD powers wireless display dongles that mirror 4K/8K video from a host PC or set-top box to a TV over a Wi-Fi 7 link. With 160 MHz channels and 4K-QAM, the module sustains the >800 Mbps throughput required for compressed 4K HDR60 streams while leaving headroom for upstream touch/voice traffic. The Bluetooth 5.3 sub-system also handles the dongle's BLE remote control and voice-assistant wake-word paths in parallel. According to the Quectel FGE576Q specification, the module's low-latency mode is specifically tuned for streaming workloads where frame pacing is critical.
推薦
Matter-over-Wi-Fi Smart Home Bridges
The FGE576QAAMD serves as the Wi-Fi + Bluetooth radio in Matter-over-Wi-Fi bridges that commission and control smart-home devices across multiple ecosystems. Bluetooth 5.3 with BLE Long Range handles commissioning of nearby battery-powered devices up to 100 m line-of-sight, while the Wi-Fi 7 radio maintains the high-throughput uplink to the home router. Triple-band support ensures the bridge can coexist with other Wi-Fi 7 APs in dense deployments without channel contention. The LGA surface-mount footprint simplifies integration into compact bridge enclosures.
推薦
Industrial Wireless Gateways and Telematics
Industrial gateways and telematics hubs leverage the FGE576QAAMD to backhaul telemetry, video, and SCADA traffic over Wi-Fi 7 to a plant network or cloud. With 3.6 Gbps PHY throughput, the module handles aggregated sensor streams plus on-site video surveillance from IP cameras, while Bluetooth 5.3 serves as a low-power local commissioning interface for technicians. Industrial temperature range requirements must be verified against the Quectel FGE576Q datasheet operating specs before deployment in unconditioned environments. Per the Quectel FGE576Q documentation, the module targets commercial-grade applications by default.
推薦
推薦產品摘要
工程參考資料，適用於 FGE576QAAMD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | FGE576QAAM | FGE576QAAMD-Q |
|---|---|---|---|
| Brand | Quectel | Quectel | Quectel |
| Package | LGA SiP (FGE576Q family) | LGA SiP (FGE576Q family) - same | LGA SiP (FGE576Q family) - same |
| Wi-Fi Standard | Wi-Fi 7 (802.11be) | Wi-Fi 7 (802.11be) | Wi-Fi 7 (802.11be) |
| Bluetooth Version | Bluetooth 5.3 | Bluetooth 5.3 | Bluetooth 5.3 |
| Frequency Bands | 2.4 / 5 / 6 GHz (triple-band) | 2.4 / 5 / 6 GHz (triple-band) | 2.4 / 5 / 6 GHz (triple-band) |
| Max PHY Data Rate | 3.6 Gbps | 3.6 Gbps | 3.6 Gbps |
| Multi-Link Operation (MLO) | Yes | Yes | Yes |
| Antenna | Not included | Onboard chip antenna | Not included |
| RoHS Compliance | Compliant | Compliant | Compliant |
主要差異化特點
- Triple-band 2.4/5/6 GHz coverage including 6 GHz (對比FCM561A (Quectel Wi-Fi 6 dual-band module))
- Wi-Fi 7 (802.11be) silicon with MLO and 4K-QAM (對比FGE576QAAM (same silicon, antenna-onboard))
- 3.6 Gbps maximum PHY data rate (對比Wi-Fi 6 modules (1.2 Gbps max PHY))
設計說明
Place the FGE576QAAMD at the corner of the host PCB with the antenna feed lines routed straight to the edge connector or u.FL footprint. Keep the LGA thermal/ground pads soldered to a continuous ground pour with at least 8 thermal vias to the inner ground plane. Maintain a 50 ohm controlled-impedance trace for the RF feed and avoid routing digital signals beneath the module footprint. Per the Quectel FGE576Q hardware design guide, keep the antenna keep-out zone (no copper, no ground pour) at least 5 mm clearance around the external antenna pad to avoid detuning.
The FGE576QAAMD draws peak currents in the 1.0-1.4 A range during Wi-Fi 7 4K-QAM transmission bursts, so a low-noise 3.3 V LDO with at least 1.5 A headroom is required. Place a 22 uF bulk capacitor and a 0.1 uF decoupling capacitor within 2 mm of the module's power pads to suppress transient droop. Avoid sharing the module's 3.3 V rail with digital subsystems that inject switching noise - per the Quectel FGE576Q specification, RF performance (EVM, throughput) degrades measurably when power-rail ripple exceeds 50 mVpp.
Do not substitute the FGE576QAAMD (antenna not included) for the FGE576QAAM (with onboard antenna) without verifying the host PCB antenna chain - the onboard-antenna variant has no RF pad exposed and assumes a chip antenna is integrated on the module substrate. Confirm regulatory certification status in your target market before deployment; Wi-Fi 7 6 GHz operation requires FCC 6E/7 or CE 6 GHz allocation depending on region. Per the Quectel FGE576Q documentation, radiated testing on the final integrated host is mandatory because module-level certifications do not transfer to modified end products.
合規資訊
RoHS and REACH compliance stated by Quectel product page. Not AEC-Q100 qualified (commercial-grade module). Regional certifications (FCC ID, CE, MIC, NCC) depend on end-product antenna integration and integrator-side testing.
