HMC8411 - 0.01-10GHz GaAs pHEMT LNA | Analog Devices
部品番号: HMC8411 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $47.29 | $47.29 |
| 10 | $43.5 | $435.00 |
| 100 | $39.8 | $3,980.00 |
| 500 | $36.2 | $18,100.00 |
| 1,000 | $32.9 | $32,900.00 |
HMC8411 概要
A low noise amplifier (LNA) is a critical component in RF front-end systems, placed at the first stage of a receiver chain to amplify weak signals while adding minimal noise. The HMC8411 belongs to the category of RF amplifiers, specifically wideband LNAs, which are essential in applications such as communications, radar, and test equipment. Its wideband coverage from 10 MHz to 10 GHz makes it versatile for various frequency bands.
Key features include a low noise figure of 1.7 dB, which is crucial for maintaining signal integrity in sensitive receivers, and a gain of 15.5 dB to boost signal levels. The device operates over a supply voltage of V and consumes mA. It is designed for 50-ohm systems, simplifying integration into standard RF chains. The LFCSP package offers excellent thermal performance and small footprint, ideal for compact designs.
Technically, the HMC8411 leverages GaAs pHEMT technology, which provides high electron mobility and low noise characteristics, making it superior to silicon-based amplifiers for high-frequency applications. The device includes internal matching networks, reducing external component count and simplifying PCB layout. It is specified for operation over the temperature range of -40°C to +85°C, ensuring reliability in harsh environments.
Typical applications include cellular infrastructure, point-to-point radios, satellite communications, radar systems, and test instrumentation. Its wideband nature allows it to be used in software-defined radios and broadband receivers. The HMC8411 is also suitable for military and aerospace applications where high performance and reliability are paramount.
When designing with the HMC8411, ensure proper bias sequencing to avoid damage. The evaluation board EV1HMC8411LP2F uses Rogers 4350 material with 50-ohm impedance traces, providing a reference for layout. Adequate decoupling on the supply pins is essential to maintain stability and performance.
ドロップイン代替品: HMC8411 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: HMC8411 （同一形状・フットプリント） — 相違点: Frequency Range, Gain, Noise Figure, Package, Technology.
クイック比較ツール — 並列比較する代替部品を選択:
HMC8411LP2FE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
HMC8411LP2FE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
HMC8411LP2FE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
HMC8411LP2FE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
HMC8411LP2FE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
HMC8411 最大定格＆電気的特性
| Frequency Range | 0.01 GHz to 10 GHz |
| Gain | 15.5 dB (typical) |
| Noise Figure | 1.7 dB (typical) |
| パッケージ | 6-LFCSP (2x2 mm) |
| 実装タイプ | Surface Mount |
| 動作温度範囲 | -40°C to +85°C |
| Storage Temperature Range | -65°C to +150°C |
| ESD Rating | 500 V, Class 1B passed |
| Technology | GaAs pHEMT MMIC |
| RoHS ステータス | Compliant |
HMC8411 ピン構成
| ピン 1 | RFIN — RF input |
| ピン 2 | GND — Ground |
| ピン 3 | VDD — Supply voltage |
| ピン 4 | RFOUT — RF output |
| ピン 5 | GND — Ground |
| ピン 6 | GND — Ground |
主な用途
HMC8411 の用途: 6 件s: Cellular Infrastructure, Point-to-Point Radios, Satellite Communications, Radar Systems, Test and Measurement, Software-Defined Radio.
Cellular Infrastructure
The HMC8411 is ideal for cellular base station receiver front-ends, providing low noise figure of 1.7 dB and wideband coverage from 0.01 to 10 GHz. It amplifies weak signals from the antenna while minimizing added noise, improving receiver sensitivity. Its 15.5 dB gain helps overcome subsequent stage losses. The device operates over -40°C to +85°C, suitable for outdoor base stations. With 50-ohm input/output, it integrates easily into standard RF chains. The LFCSP package allows compact PCB designs, reducing board space in multi-channel systems.
おすすめ
Point-to-Point Radios
In point-to-point microwave links, the HMC8411 provides low noise amplification for the receiver, ensuring reliable data transmission over long distances. Its wideband operation covers common frequency bands from 6 to 38 GHz, though the HMC8411 covers up to 10 GHz, making it suitable for sub-10 GHz links. The 1.7 dB noise figure enhances link budget, allowing higher data rates or longer distances. The device's gain of 15.5 dB reduces the need for additional amplification stages. Its small package is ideal for compact radio modules.
おすすめ
Satellite Communications
The HMC8411 is used in satellite communication receivers, particularly in L-band and C-band applications up to 10 GHz. Its low noise figure is critical for capturing weak satellite signals. The wideband performance allows it to cover multiple satellite bands with a single LNA. The device's 50-ohm interface simplifies connection to antennas and filters. Operating temperature range of -40°C to +85°C ensures reliability in outdoor and space-adjacent environments. The LFCSP package is lightweight and suitable for space-constrained designs.
おすすめ
Radar Systems
In radar receivers, the HMC8411 provides low-noise amplification of return echoes, improving target detection range. Its wideband operation from 0.01 to 10 GHz covers various radar bands, including S-band and C-band. The 1.7 dB noise figure enhances sensitivity, allowing detection of smaller targets. The device's gain of 15.5 dB helps maintain signal levels for processing. It operates over -40°C to +85°C, suitable for military and industrial radar. The compact package enables integration into phased array modules.
おすすめ
Test and Measurement
The HMC8411 is used in test equipment such as spectrum analyzers and signal generators, where wideband, low-noise amplification is required. Its 0.01 to 10 GHz frequency range covers many test applications. The low noise figure ensures accurate measurements of weak signals. The device's flat gain across frequency helps maintain calibration. It operates over -40°C to +85°C, suitable for benchtop and portable instruments. The LFCSP package allows for compact instrument designs.
おすすめ
Software-Defined Radio
In software-defined radios (SDR), the HMC8411 provides wideband amplification from 0.01 to 10 GHz, covering multiple communication bands. Its low noise figure of 1.7 dB is essential for receiving weak signals across a broad spectrum. The device's 15.5 dB gain boosts signal levels for ADC conversion. It operates over -40°C to +85°C, suitable for portable and fixed SDR platforms. The 50-ohm interface simplifies connection to antennas and mixers. The compact package is ideal for multi-channel SDR designs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: HMC8411 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | HMC8411LP2FE | HMC8411LP2FE | HMC8411LP2FE |
|---|---|---|---|---|
| Package | 6-LFCSP (2x2 mm) | 6-LFCSP (2x2 mm) | 6-LFCSP (2x2 mm) | 6-LFCSP (2x2 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Frequency Range | 0.01 GHz to 10 GHz | 0.01 GHz to 10 GHz | 0.01 GHz to 10 GHz | 0.01 GHz to 10 GHz |
| Gain | 15.5 dB | 15.5 dB | 15.5 dB | 15.5 dB |
| Noise Figure | 1.7 dB | 1.7 dB | 1.7 dB | 1.7 dB |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Technology | GaAs pHEMT | GaAs pHEMT | GaAs pHEMT | GaAs pHEMT |
主な差別化要因
- Wideband coverage from 0.01 to 10 GHz （vs HMC8411LP2FE)
- Low noise figure of 1.7 dB （vs HMC8411LP2FE)
- GaAs pHEMT technology （vs HMC8411LP2FE)
設計ノート
Ensure proper bias sequencing: apply VDD after RF input is connected to avoid damage. Use a low-noise supply with adequate decoupling (e.g., 100 pF and 0.1 uF capacitors) close to the VDD pin. The supply voltage should be within the specified range; refer to the datasheet for exact values. Incorrect bias can degrade performance or damage the device.
Follow the evaluation board layout (EV1HMC8411LP2F) which uses Rogers 4350 with 50-ohm impedance traces. Keep RF input and output traces short and matched to 50 ohms. Use ground vias around the RF pins to minimize parasitic inductance. The exposed pad should be soldered to a ground plane for thermal and electrical performance.
Avoid exceeding the maximum input power to prevent damage. Ensure the RF input is AC-coupled if DC bias is present. The device is ESD sensitive (500 V Class 1B), so handle with proper ESD precautions. Also, verify the supply voltage and current ratings from the datasheet before design.
コンプライアンス情報
RoHS compliant per Analog Devices product page. No AEC-Q100 qualification for this RF component.
