Renesas Electronics

ICS180M-01 - Low EMI Clock Generator | Renesas Electronics

部品番号: ICS180M-01 ✓ 生産中
8-SOIC, 8 pins Package 28 MHz Speed
MOQ: 1 |

ICS180M-01 概要

The Renesas Electronics ICS180M-01 is a low-EMI, single-output spread-spectrum clock generator with a maximum output frequency of 28 MHz in an 8-pin SOIC package. It accepts either a clock or crystal input, produces a CMOS output, and provides a 1:1 input-to-output ratio. The device uses a proprietary combination of analog and digital phase-locked-loop technology to generate a low-EMI output clock.

A spread-spectrum clock generator is a clock and timing IC that varies clock energy over a controlled frequency band. This technique reduces narrowband electromagnetic emissions by distributing clock energy across multiple frequencies rather than concentrating it around one carrier. In the broader semiconductor hierarchy, the ICS180M-01 belongs to clock and timing ICs, PLL-based clock synthesis, and broader frequency-generation and timing-control devices.

The ICS180M-01 supports both clock and crystal input, giving a designer flexibility when the board already contains a reference oscillator or requires operation from a crystal. Its single CMOS output is suitable for systems that need one low-EMI clock domain. The 28 MHz maximum output frequency covers applications requiring moderate-speed digital clock distribution, although the minimum operating frequency and detailed timing limits are not stated in the available product records.

The central architectural feature is the proprietary mix of analog and digital PLL technology. A PLL locks the generated output to the selected reference, while spread-spectrum modulation controls the clock spectrum and reduces electromagnetic interference concentration. The device contains one clock-generation circuit, and its stated 1:1 input-to-output ratio indicates that the output frequency follows the input reference without a stated frequency multiplication or division ratio.

Typical uses include EMI-sensitive digital control systems, communications equipment, industrial electronics, and clock-distribution subsystems in which reducing narrowband clock radiation is important. The device can also serve as a low-EMI reference-clock source in equipment with multiple digital subsystems, provided the reference frequency and all timing requirements remain within the device's operating limits.

PCB implementation should preserve a short, controlled return path from the input reference and provide a clean supply connection to the clock generator. Decoupling should follow the manufacturer application guidance, and unused input or output states should be handled according to the datasheet rather than inferred from the brief device description. Differential clock-impedance requirements should be checked before using the CMOS output in a high-speed or length-sensitive topology.

This product record combines the device's key functional characteristics, sourcing information, and design-oriented comparison points. It also distinguishes the confirmed 180M-01LF drop-in candidate from unverified similarly named clock ICs, helping engineers identify replacements without confusing functional similarity with guaranteed pin compatibility.

ドロップイン代替品: ICS180M-01 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

180M-01LF

✅ ドロップイン
📦 8-SOIC
8 pins versus 8 pins, with consistent terminals and package; main performance parameters and functional characteristics are stated to be equivalent

📋 参考代替品(カタログ未掲載)

ICS180M-01 仕様

Product Type Spread Spectrum Clock Generator
Description Low EMI Clock Generator
Maximum Output Frequency 28 MHz
出力タイプ CMOS
Number of Circuits 1 circuit
Input Type Clock or Crystal
Input-to-Output Ratio 1:1
PLL Yes; proprietary mix of analog and digital PLL technology
出力構成 Single Output
パッケージ 8-SOIC, 8 pins

ICS180M-01 8-soic, 8 pins ピン配置ガイド

ICS180M-01 (8-soic, 8 pins パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ICS180M-01 の 8-soic, 8 pins パッケージピン配置図

詳細なピン配置データはありません: ICS180M-01.

詳細は データシート をご参照ください。

主な用途

ICS180M-01 の用途: 6 件s: EMI-Sensitive Digital Control Systems, Industrial Automation Equipment, Communications Equipment, Low-EMI Reference Clock Distribution, Network and Server Peripheral Cards, Consumer and Instrumentation Electronics.

🔧

EMI-Sensitive Digital Control Systems

The ICS180M-01 fits digital control equipment where a single low-EMI clock can reduce narrowband emissions from a concentrated clock line. Its spread-spectrum clock generation distributes energy over a frequency range, while the proprietary analog-and-digital PLL architecture synchronizes the CMOS output to either a clock or crystal reference. The stated 28 MHz maximum output provides a practical ceiling for moderate-speed control and logic domains. Engineers should preserve a short reference path, apply manufacturer-recommended decoupling, and confirm the final spectrum through PCB-level emissions testing because spread-spectrum modulation does not remove every conducted or radiated-emission mechanism.

🏭

Industrial Automation Equipment

Industrial controllers often combine processor clocks, isolated communication links, switching power stages, and high-speed digital interfaces that can unintentionally act as radiating structures. The ICS180M-01 can serve as the low-EMI clock source for a central digital domain, using its single CMOS output and PLL-based reference locking to reduce narrowband clock concentration. A 28 MHz maximum output supports common moderate-speed industrial control logic without requiring multiple clock domains. The design should verify reference accuracy, timing margins, temperature behavior, and conducted-emissions margins under the actual load because industrial products may add clock harmonics and switching edges not represented by the basic device description.

🌐

Communications Equipment

Communications electronics benefit from a clock source that lowers concentrated electromagnetic energy while maintaining a stable relationship to a system reference. The ICS180M-01 accepts a clock or crystal input and produces one CMOS output with a 1:1 input-to-output ratio, allowing it to fit architectures that do not need frequency multiplication or division. Its spread-spectrum operation can be valuable in RF-adjacent digital sections, provided the reference remains within the device's specified operating range. Final approval should include conducted and radiated-emissions measurements because transceiver harmonics, connector cables, and PCB stack-up can dominate a system's overall EMI performance.

💡

Low-EMI Reference Clock Distribution

The ICS180M-01 can generate a low-EMI reference clock for a digital subsystem that needs one CMOS output rather than a multi-channel clock tree. Locking to a clock or crystal reference provides flexibility for designs that already have a stable oscillator or prefer a discrete crystal source. The single circuit and 1:1 ratio simplify clock routing, while the 28 MHz maximum supports several common processor and bus-clock scenarios. Before adoption, confirm output timing, duty-cycle behavior, jitter, startup time, and load capability in the detailed datasheet, then perform edge-rate-aware signal-integrity checks on long PCB traces.

🖥️

Network and Server Peripheral Cards

Peripheral cards added to network servers or data-processing equipment can create narrowband clock emissions that become more pronounced when high-speed edges combine with cables and enclosure resonances. The ICS180M-01 offers a way to reduce concentrated EMI from a single clock source while retaining a conventional 8-SOIC footprint. Its one CMOS output and PLL-based generation suit designs where the card needs one local timing reference rather than a complex clock-tree IC. Because server-class systems impose strict conducted-emissions and system-timing requirements, prototype measurements should include worst-case processor activity, auxiliary-power transitions, and representative cable arrangements.

📱

Consumer and Instrumentation Electronics

The ICS180M-01 can support low-EMI clocking in compact consumer devices, laboratory instruments, and measurement equipment where switching-clock harmonics may interfere with sensitive analog sections. A spread-spectrum clock reduces energy concentrated at one frequency, while the PLL locks the CMOS output to the board reference to preserve timing consistency. The device is most appropriate for a single reference domain below the stated 28 MHz maximum and for boards designed around an 8-SOIC footprint. Instrument designers should still isolate sensitive analog rails, observe clock-edge crosstalk, and validate emissions under the highest clock and highest load operating conditions.

What is the ICS180M-01?
The ICS180M-01 is a low-EMI, single-output spread-spectrum clock generator with a maximum output frequency of 28 MHz. According to the manufacturer datasheet, it accepts a clock or crystal input, provides a CMOS output, and uses a proprietary combination of analog and digital phase-locked-loop technology. The device is packaged in an 8-pin SOIC and is intended for clock generation where reducing concentrated electromagnetic emissions is important.
What are the key specifications of ICS180M-01 that engineers should know?
The ICS180M-01 combines a maximum output frequency of 28 MHz, one CMOS clock output, a 1:1 input-to-output ratio, and support for either clock or crystal inputs. The manufacturer datasheet identifies the device as a low-EMI spread-spectrum clock generator using a proprietary mix of analog and digital PLL technology. Its 8-SOIC package provides a compact surface-mount implementation for moderate-frequency digital clocking systems.
What clock inputs does the ICS180M-01 accept?
The ICS180M-01 accepts either a clock or a crystal input. Its input-to-output ratio is specified as 1:1, indicating that the generated output follows the reference without a stated multiplication or division factor. According to the manufacturer datasheet, the reference is captured through the analog-and-digital PLL architecture. The accepted input-frequency range and crystal load requirements must be checked in the detailed electrical tables before finalizing a design.
How does the ICS180M-01 reduce EMI?
The ICS180M-01 reduces narrowband EMI by generating a low-EMI spread-spectrum clock instead of concentrating clock energy around a single frequency. The manufacturer describes a proprietary mixture of analog and digital PLL technology for clock generation. The exact modulation percentage and spectral profile are not stated in the product listing, so an EMC validation should use the manufacturer's spread-spectrum waveform and application guidance rather than an assumed modulation range.
What package does the ICS180M-01 use?
The ICS180M-01 is offered in an 8-SOIC package. According to the manufacturer product description and package listing, the device contains eight pins and is intended for surface-mount assembly. Because an SOIC footprint is sensitive to lead geometry and exposed-pad treatment, PCB land patterns should follow the official package drawing. The ICS180M-01 is a leaded SOIC device and should not be assigned a QFN footprint.
Where can I download the ICS180M-01 datasheet PDF?
The ICS180M-01 datasheet is available through the linked datasheet record and can be used to review the detailed electrical characteristics, pin descriptions, timing diagrams, and application information. The manufacturer datasheet identifies the part as an 8-SOIC low-EMI clock generator. Use the official PDF for design sign-off, especially when checking supply voltage, input-frequency limits, output timing, crystal loading, and spread-spectrum parameters.
Where can I find the ICS180M-01 pinout?
The ICS180M-01 pinout should be taken from the pin-description table and package drawing in the manufacturer datasheet. The verified package record confirms an 8-SOIC package, but it does not reproduce the individual pin names. Use the datasheet's numbering sequence when assigning the clock or crystal input, PLL-related connections, supply, ground, and CMOS output. Do not infer an unused-pin function from a similarly named clock generator.
Can the 180M-01LF replace the ICS180M-01?
The 180M-01LF is identified as a complete replacement for the ICS180M-01 because both use an 8-pin SOIC package and are stated to have consistent terminals, packages, main performance parameters, and functional characteristics. This makes it the strongest confirmed drop-in candidate in the available cross-reference records. Production substitution should still be checked against purchasing requirements, lifecycle notices, and the latest manufacturer documentation.
What can replace the ICS180M-01 on the same PCB?
The 180M-01LF is the confirmed same-footprint replacement identified for the ICS180M-01, with eight pins in both packages and consistent terminal arrangements. The cross-reference description states that the main performance parameters and functional characteristics are consistent. Other similarly named or functionally similar clock generators were not established as pin-compatible drop-ins, so they should not be used for a no-change PCB replacement without engineering review.
Is the ICS180M-01 the same as the 180M-01LF?
The ICS180M-01 and 180M-01LF are presented as functionally equivalent, pin-compatible 8-SOIC devices in the available cross-reference record. Their terminal arrangements and packages are consistent, and the stated main performance parameters match. The difference is the manufacturer naming and ordering form rather than a PCB-level change. Confirm the exact suffix, production status, and purchasing configuration before treating the two markings as identical for procurement.
When should I choose the ICS180M-01 over another low-EMI clock generator?
Choose the ICS180M-01 when the design specifically requires a 28 MHz maximum single CMOS clock output, either clock or crystal input, a 1:1 ratio, and spread-spectrum operation in an 8-SOIC package. It is preferable when an existing board already uses its exact footprint and reference configuration. A different generator should be selected when the system requires another frequency range, additional outputs, differential clocking, or different supply and timing limits.
Is the ICS180M-01 suitable for EMI-sensitive communications equipment?
The ICS180M-01 is suitable for EMI-sensitive communications equipment when its reference frequency and output requirements fit the device's 28 MHz maximum. Its spread-spectrum clock-generation function is intended to reduce concentrated clock emissions, while PLL technology synchronizes the output to the selected reference. Designers should still perform enclosure, PCB, filtering, and conducted-emissions testing because a clock generator alone cannot guarantee regulatory compliance.
What is the lead time for the ICS180M-01?
The current manufacturer lead time for the ICS180M-01 should be requested through the Request a Quote form on this page. Current production status, lot availability, and orderable suffix configuration can change independently of technical equivalence. For a new production design, provide the required quantity, target date, and acceptable packaging configuration so procurement can confirm the current supply position.
Is the ICS180M-01 in stock and what does it cost?
Current stock and a firm quotation for the ICS180M-01 should be obtained through the Request a Quote form on this page. The device is indexed as a Renesas clock-generator part, but real-time inventory and commercial terms vary by order quantity and suffix. Submit the exact MPN, quantity, and delivery requirements rather than relying on a generic family-level availability statement.
Where can I buy the ICS180M-01 online?
The ICS180M-01 can be requested through the Request a Quote form on this page. Provide the exact MPN, required quantity, delivery location, and preferred shipment date so the current supply position can be confirmed. For engineering evaluation, distinguish the base ICS180M-01 ordering designation from any package, tape-and-reel, temperature, or lead-free suffix that may be used on the purchase order.

エンジニアリング参考データ: ICS180M-01 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ICS180M-01 for a new design that needs one low-EMI CMOS clock, accepts either a clock or crystal source, supports frequencies up to 28 MHz, and uses an 8-SOIC footprint. Its 1:1 ratio makes it straightforward to organize around an existing reference clock without added multiplication or division. Choose the 180M-01LF when an existing ICS180M-01 board needs an alternate drop-in ordering form; the available cross-reference records identify matching terminals, package, and principal functional characteristics. Do not select ICS180MI-01T or P2180BG-08-ST as drop-ins without confirming their pin definitions, supply requirements, timing, and spread-spectrum performance. For designs requiring multiple outputs, differential clocking, frequencies above 28 MHz, or tighter documented jitter specifications, use a newer clock-generator family whose full electrical data matches those requirements instead of forcing a functional-only replacement.

代替品との比較

パラメータ この製品 180M-01LF
Package 8-SOIC 8-SOIC - same
Brand Renesas Electronics Renesas Electronics

主な差別化要因

  • Supports both clock and crystal references with a 1:1 ratio (vs ICS180MI-01T)
  • Uses a proprietary analog-and-digital PLL implementation (vs P2180BG-08-ST)
  • Direct 8-SOIC drop-in path for existing designs (vs 180M-01LF)

設計ノート

Route the clock and crystal connections as short, controlled-impedance traces and keep the reference oscillator loop compact. Place the device close to the clock source it references to reduce susceptibility to edge-coupled noise and added phase uncertainty. Avoid routing the sensitive reference beneath high-current switching nodes or parallel to fast digital buses. Ground-return continuity is as important as trace length because an imperfect return path can increase radiated emissions despite the clock generator's spread-spectrum operation.

Treat spread-spectrum modulation as one layer of EMC control rather than a substitute for correct PCB design. Check clock-edge harmonics with the actual output load, enclosure, cable set, and power-converter activity present in the product. Maintain continuous ground planes, minimize loop areas around the clock source, and follow the manufacturer's input-capacitor and output-load guidance. Final compliance should be established through conducted and radiated-emissions testing because spread-spectrum percentage and system impedance materially affect the resulting spectrum.

Do not substitute a similarly named PLL or clock-generator IC solely because it also provides a CMOS output. The replacement must preserve the exact 8-SOIC footprint, terminal functions, reference-input configuration, operating voltage, timing limits, and spread-spectrum behavior. For an existing ICS180M-01 board, the 180M-01LF is the confirmed drop-in candidate. For a new design, verify every pin against the manufacturer datasheet and confirm the exact ordering suffix before layout release.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The verified product records identify the ICS180M-01 as a clock-generator IC in an 8-SOIC package but do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. AEC-Q100 is not applicable to the non-automotive clock-generator category as presented.

データ検証日: 2026-11-11 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ICS180M-01 datasheet ICS180M-01 pinout ICS180M-01 datasheet pdf ICS180M-01 equivalent ICS180M-01 replacement ICS180M-01 drop-in replacement ICS180M-01 cross reference ICS180M-01 28MHz clock generator ICS180M-01 8-SOIC footprint ICS180M-01 low EMI application ICS180M-01 price ICS180M-01 stock Renesas ICS180M-01 ICS180M-01 vs 180M-01LF

関連部品&用語

Renesas Electronics ICS180M-01 180M-01LF ICS180MI-01T P2180BG-08-ST Integrated Device Technology Integrated Circuit Systems Low EMI Clock Generator Spread Spectrum Clock Generator Clock and Timing IC PLL Clock Synthesizer Phase-Locked Loop PLL CMOS Output Crystal Input Clock Input 8-SOIC Package Surface Mount 28 MHz Maximum Output Frequency 1:1 Input-to-Output Ratio Electromagnetic Interference EMI Reduction Industrial Electronics Communications Equipment
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示