ICS180M-01 - Low EMI Clock Generator | Renesas Electronics
MPN: ICS180M-01 ✓ AktifICS180M-01 Ringkasan
A spread-spectrum clock generator is a clock and timing IC that varies clock energy over a controlled frequency band. This technique reduces narrowband electromagnetic emissions by distributing clock energy across multiple frequencies rather than concentrating it around one carrier. In the broader semiconductor hierarchy, the ICS180M-01 belongs to clock and timing ICs, PLL-based clock synthesis, and broader frequency-generation and timing-control devices.
The ICS180M-01 supports both clock and crystal input, giving a designer flexibility when the board already contains a reference oscillator or requires operation from a crystal. Its single CMOS output is suitable for systems that need one low-EMI clock domain. The 28 MHz maximum output frequency covers applications requiring moderate-speed digital clock distribution, although the minimum operating frequency and detailed timing limits are not stated in the available product records.
The central architectural feature is the proprietary mix of analog and digital PLL technology. A PLL locks the generated output to the selected reference, while spread-spectrum modulation controls the clock spectrum and reduces electromagnetic interference concentration. The device contains one clock-generation circuit, and its stated 1:1 input-to-output ratio indicates that the output frequency follows the input reference without a stated frequency multiplication or division ratio.
Typical uses include EMI-sensitive digital control systems, communications equipment, industrial electronics, and clock-distribution subsystems in which reducing narrowband clock radiation is important. The device can also serve as a low-EMI reference-clock source in equipment with multiple digital subsystems, provided the reference frequency and all timing requirements remain within the device's operating limits.
PCB implementation should preserve a short, controlled return path from the input reference and provide a clean supply connection to the clock generator. Decoupling should follow the manufacturer application guidance, and unused input or output states should be handled according to the datasheet rather than inferred from the brief device description. Differential clock-impedance requirements should be checked before using the CMOS output in a high-speed or length-sensitive topology.
This product record combines the device's key functional characteristics, sourcing information, and design-oriented comparison points. It also distinguishes the confirmed 180M-01LF drop-in candidate from unverified similarly named clock ICs, helping engineers identify replacements without confusing functional similarity with guaranteed pin compatibility.
Pilihan pengganti yang segera untuk ICS180M-01 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
180M-01LF
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ICS180M-01 Spesifikasi
| Product Type | Spread Spectrum Clock Generator |
| Description | Low EMI Clock Generator |
| Maximum Output Frequency | 28 MHz |
| Jenis Output | CMOS |
| Number of Circuits | 1 circuit |
| Input Type | Clock or Crystal |
| Input-to-Output Ratio | 1:1 |
| PLL | Yes; proprietary mix of analog and digital PLL technology |
| Konfigurasi Output | Single Output |
| Kemasan | 8-SOIC, 8 pins |
Panduan Konfigurasi Pin ICS180M-01 8-soic, 8 pins
Konfigurasi pin untuk ICS180M-01 (8-soic, 8 pins pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk ICS180M-01.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ICS180M-01 patut untuk 6 aplikasis: EMI-Sensitive Digital Control Systems, Industrial Automation Equipment, Communications Equipment, Low-EMI Reference Clock Distribution, Network and Server Peripheral Cards, Consumer and Instrumentation Electronics.
EMI-Sensitive Digital Control Systems
The ICS180M-01 fits digital control equipment where a single low-EMI clock can reduce narrowband emissions from a concentrated clock line. Its spread-spectrum clock generation distributes energy over a frequency range, while the proprietary analog-and-digital PLL architecture synchronizes the CMOS output to either a clock or crystal reference. The stated 28 MHz maximum output provides a practical ceiling for moderate-speed control and logic domains. Engineers should preserve a short reference path, apply manufacturer-recommended decoupling, and confirm the final spectrum through PCB-level emissions testing because spread-spectrum modulation does not remove every conducted or radiated-emission mechanism.
Industrial Automation Equipment
Industrial controllers often combine processor clocks, isolated communication links, switching power stages, and high-speed digital interfaces that can unintentionally act as radiating structures. The ICS180M-01 can serve as the low-EMI clock source for a central digital domain, using its single CMOS output and PLL-based reference locking to reduce narrowband clock concentration. A 28 MHz maximum output supports common moderate-speed industrial control logic without requiring multiple clock domains. The design should verify reference accuracy, timing margins, temperature behavior, and conducted-emissions margins under the actual load because industrial products may add clock harmonics and switching edges not represented by the basic device description.
Communications Equipment
Communications electronics benefit from a clock source that lowers concentrated electromagnetic energy while maintaining a stable relationship to a system reference. The ICS180M-01 accepts a clock or crystal input and produces one CMOS output with a 1:1 input-to-output ratio, allowing it to fit architectures that do not need frequency multiplication or division. Its spread-spectrum operation can be valuable in RF-adjacent digital sections, provided the reference remains within the device's specified operating range. Final approval should include conducted and radiated-emissions measurements because transceiver harmonics, connector cables, and PCB stack-up can dominate a system's overall EMI performance.
Low-EMI Reference Clock Distribution
The ICS180M-01 can generate a low-EMI reference clock for a digital subsystem that needs one CMOS output rather than a multi-channel clock tree. Locking to a clock or crystal reference provides flexibility for designs that already have a stable oscillator or prefer a discrete crystal source. The single circuit and 1:1 ratio simplify clock routing, while the 28 MHz maximum supports several common processor and bus-clock scenarios. Before adoption, confirm output timing, duty-cycle behavior, jitter, startup time, and load capability in the detailed datasheet, then perform edge-rate-aware signal-integrity checks on long PCB traces.
Network and Server Peripheral Cards
Peripheral cards added to network servers or data-processing equipment can create narrowband clock emissions that become more pronounced when high-speed edges combine with cables and enclosure resonances. The ICS180M-01 offers a way to reduce concentrated EMI from a single clock source while retaining a conventional 8-SOIC footprint. Its one CMOS output and PLL-based generation suit designs where the card needs one local timing reference rather than a complex clock-tree IC. Because server-class systems impose strict conducted-emissions and system-timing requirements, prototype measurements should include worst-case processor activity, auxiliary-power transitions, and representative cable arrangements.
Consumer and Instrumentation Electronics
The ICS180M-01 can support low-EMI clocking in compact consumer devices, laboratory instruments, and measurement equipment where switching-clock harmonics may interfere with sensitive analog sections. A spread-spectrum clock reduces energy concentrated at one frequency, while the PLL locks the CMOS output to the board reference to preserve timing consistency. The device is most appropriate for a single reference domain below the stated 28 MHz maximum and for boards designed around an 8-SOIC footprint. Instrument designers should still isolate sensitive analog rails, observe clock-edge crosstalk, and validate emissions under the highest clock and highest load operating conditions.
Data referensi kejuruteraan untuk ICS180M-01 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | 180M-01LF |
|---|---|---|
| Package | 8-SOIC | 8-SOIC - same |
| Brand | Renesas Electronics | Renesas Electronics |
Penyeberangsung Jelas
- Supports both clock and crystal references with a 1:1 ratio (vsICS180MI-01T)
- Uses a proprietary analog-and-digital PLL implementation (vsP2180BG-08-ST)
- Direct 8-SOIC drop-in path for existing designs (vs180M-01LF)
Catatan Desain
Route the clock and crystal connections as short, controlled-impedance traces and keep the reference oscillator loop compact. Place the device close to the clock source it references to reduce susceptibility to edge-coupled noise and added phase uncertainty. Avoid routing the sensitive reference beneath high-current switching nodes or parallel to fast digital buses. Ground-return continuity is as important as trace length because an imperfect return path can increase radiated emissions despite the clock generator's spread-spectrum operation.
Treat spread-spectrum modulation as one layer of EMC control rather than a substitute for correct PCB design. Check clock-edge harmonics with the actual output load, enclosure, cable set, and power-converter activity present in the product. Maintain continuous ground planes, minimize loop areas around the clock source, and follow the manufacturer's input-capacitor and output-load guidance. Final compliance should be established through conducted and radiated-emissions testing because spread-spectrum percentage and system impedance materially affect the resulting spectrum.
Do not substitute a similarly named PLL or clock-generator IC solely because it also provides a CMOS output. The replacement must preserve the exact 8-SOIC footprint, terminal functions, reference-input configuration, operating voltage, timing limits, and spread-spectrum behavior. For an existing ICS180M-01 board, the 180M-01LF is the confirmed drop-in candidate. For a new design, verify every pin against the manufacturer datasheet and confirm the exact ordering suffix before layout release.
Maklumat Kesediaan
The verified product records identify the ICS180M-01 as a clock-generator IC in an 8-SOIC package but do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. AEC-Q100 is not applicable to the non-automotive clock-generator category as presented.