Renesas Electronics

ICS411MLF - 25MHz PC Peripheral Clock | Renesas Electronics

部品番号: ICS411MLF ✗ 生産終了
3 V to 3.6 V Vdss 8-SOIC, 0.154 inch body width, 3.90 mm width Package 25 MHz Speed
MOQ: 1 |

ICS411MLF 概要

The Renesas Electronics ICS411MLF is a 25 MHz PC peripheral clock synthesizer packaged in an 8-pin SOIC surface-mount package. It operates from a 3 V to 3.6 V supply and is intended for personal-computer motherboard and peripheral clock applications. The device provides a cost-effective clock-generation solution designed to reduce the component count associated with distributing a common peripheral reference clock.

A peripheral clock synthesizer is a type of clock and timing integrated circuit that generates or conditions a stable reference signal for digital subsystems. Clock generators and clock buffers sit within the broader clock-and-timing hierarchy, which supports synchronization, data transfer, and deterministic circuit operation in personal computers, communications equipment, and embedded systems. The ICS411MLF converts a system timing reference into the clock required by compatible PC peripheral functions.

Key characteristics include a nominal output frequency of 25 MHz, a 3 V to 3.6 V operating supply range, and an 8-SOIC package compatible with standard surface-mount assembly. Its single-function architecture allows a motherboard or peripheral design to obtain a defined clock without implementing a general-purpose programmable oscillator. The 8-pin package also keeps the required PCB footprint compact while providing separate supply and clock-related connections.

The ICS411MLF is intended for applications where a conventional, fixed-frequency clock source is sufficient and the design priority is component-count reduction. Its fixed 25 MHz output simplifies schematic design because the required frequency does not need to be programmed or adjusted during operation. The manufacturer describes the device as a cost-effective clock synthesizer for PC motherboard and peripheral applications, making it most appropriate for established platform architectures rather than new designs requiring programmable frequency, spread-spectrum modulation, or fractional-N synthesis.

Typical uses include PC motherboard peripheral clock distribution, storage-controller clocking, interface-module clocking, and legacy peripheral systems operating from a 3.3 V rail. In these designs, the synthesizer supplies a common local reference while system-level oscillators or phase-locked loops establish the master timing hierarchy. Power-system design must still account for the device's 3 V to 3.6 V operating range and verify the output behavior against the load and trace requirements of the connected peripheral.

The principal design consideration is compatibility with the target clock tree. Confirm the required frequency, supply voltage, output-load expectations, and board-level timing budget in the manufacturer datasheet before layout release. Route the clock output as a short, controlled-impedance trace and keep the supply return path close to the device so that the fixed 25 MHz reference reaches the load without unnecessary added noise or timing distortion.

This page organizes the manufacturer and distributor information for the ICS411MLF into an engineering-oriented product record. It combines the 25 MHz clock function, supply range, 8-SOIC packaging, purchasing guidance, and design considerations so that engineers can evaluate the device quickly against motherboard and peripheral clock requirements.

ドロップイン代替品: ICS411MLF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

ICS411MLF 仕様

Manufacturer Renesas Electronics
機能 PC peripheral clock synthesizer
Output Frequency 25 MHz
Supply Voltage Range 3 V to 3.6 V
Device Type Clock synthesizer / frequency generator
パッケージ 8-SOIC, 0.154 inch body width, 3.90 mm width
実装タイプ Surface mount
Packaging Tube
Operating Class PC peripheral clock
Design Objective Reduce component count in PC motherboard and peripheral applications

ICS411MLF 8-soic, 0.154 inch body width, 3.90 mm width ピン配置ガイド

ICS411MLF (8-soic, 0.154 inch body width, 3.90 mm width パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ICS411MLF の 8-soic, 0.154 inch body width, 3.90 mm width パッケージピン配置図

詳細なピン配置データはありません: ICS411MLF.

詳細は データシート をご参照ください。

主な用途

ICS411MLF の用途: 6 件s: PC Motherboard Peripheral Clocking, Storage Controller Clock Reference, Interface Module Clocking, Peripheral Adapter Reference Clock, Legacy Digital Subsystem Timing, Instrumentation and Test Support Clock.

🖥️

PC Motherboard Peripheral Clocking

The ICS411MLF suits a legacy or established PC motherboard that needs a dedicated 25 MHz peripheral reference without a programmable oscillator. Its 3 V to 3.6 V operating range aligns with a 3.3 V system rail, while the 8-SOIC package minimizes board area. Place the device near the receiving peripheral logic, connect the bypass capacitor at the supply pins, and route the output as a short trace. Because this is a fixed-frequency clock, the design should verify that 25 MHz is the exact local reference required and that the output amplitude satisfies the receiver's threshold specifications.

💾

Storage Controller Clock Reference

A storage-controller subsystem can use the ICS411MLF as a local 25 MHz reference when the controller requires a dedicated peripheral clock and the system already provides the appropriate reference input. The fixed output avoids programming overhead and reduces the number of timing components compared with a programmable clock generator. The designer must confirm the controller's permitted frequency tolerance, clock amplitude, and duty-cycle expectations in its documentation, then keep the ICS411MLF supply and ground connections close to the device to minimize supply-induced clock disturbance.

🌐

Interface Module Clocking

The ICS411MLF can support a compact interface module requiring a common 25 MHz peripheral clock on a 3.3 V rail. Its eight-pin SOIC package is convenient for conventional reflow assembly and keeps routing straightforward. Use a controlled-impedance clock trace, avoid adding test-point stubs that create unwanted reflections, and provide a nearby supply bypass capacitor. This application is best for fixed-frequency legacy interfaces; a programmable clock generator is a better choice when the module needs selectable rates, multiple derived outputs, or software-controlled clock management.

🔧

Peripheral Adapter Reference Clock

An add-in or external peripheral adapter may require a local 25 MHz clock where the host interface does not distribute a suitable reference to that subsystem. The ICS411MLF provides a compact fixed-frequency solution in an 8-SOIC package and operates from 3 V to 3.6 V. Confirm the adapter's timing budget and clock-input specification before layout, since tolerance and phase requirements determine whether the synthesized reference is acceptable. Keep the output path short and isolate the clock trace from switching-node edges where possible.

⚡

Legacy Digital Subsystem Timing

The ICS411MLF fits established digital subsystems that expect a 25 MHz clock and operate from a 3.3 V rail, particularly where a cost-focused design goal is to minimize the component count of the clock tree. Its fixed output means no firmware configuration is necessary, which simplifies validation for a stable platform. Nevertheless, the receiving logic must be checked for minimum input pulse width, duty-cycle limits, setup and hold requirements, and a valid clock edge definition before the part is approved for production.

📟

Instrumentation and Test Support Clock

The ICS411MLF can act as a simple 25 MHz reference in older test, measurement, or data-acquisition hardware that expects a conventional peripheral clock. The 8-SOIC package is easy to place on a densely populated analog or mixed-signal board, and the 3 V to 3.6 V range supports 3.3 V instrumentation. When the clock drives precision converters or counters, validate the edge quality and output level against those components, and keep high-energy analog and switching traces spatially separated from the clock output.

What is the Renesas ICS411MLF used for?
The Renesas ICS411MLF is a fixed 25 MHz PC peripheral clock synthesizer designed for motherboard and peripheral clock applications. It provides a defined timing reference in an 8-SOIC package while helping reduce the component count of a conventional PC clock tree. According to the Renesas datasheet, the device operates from 3 V to 3.6 V, so it is suited to 3.3 V system rails and legacy or established PC peripheral architectures.
What is the output frequency of the ICS411MLF?
The ICS411MLF generates a 25 MHz peripheral clock. The 25 MHz value is fixed rather than programmable, which simplifies board design because no synthesis-control interface or frequency-setting procedure is required. The manufacturer identifies the part as a PC peripheral clock synthesizer, and the 25 MHz specification is consistent with the ICS411MLF product listings. Confirm the clock amplitude and load requirements in the manufacturer datasheet for the connected receiver.
What is the supply voltage range of the ICS411MLF?
The ICS411MLF operates from 3 V to 3.6 V. This range supports systems that use a nominal 3.3 V supply while providing design margin around the nominal rail. The manufacturer datasheet is the controlling document for operating conditions, and designers should also verify startup, output-level, and absolute-maximum requirements before applying the device to a board.
What package does the ICS411MLF use?
The ICS411MLF uses an 8-SOIC surface-mount package with a stated body width of 0.154 inch, or 3.90 mm. The eight-pin package supports conventional reflow assembly and keeps the clock generator compact on a motherboard or peripheral board. Use the pin-description table and land pattern in the manufacturer datasheet when assigning traces and placing the decoupling capacitor.
Where can I download the ICS411MLF datasheet PDF?
The Renesas ICS411MLF datasheet PDF is available through the manufacturer-hosted document linked on this page. The document provides the authoritative pin descriptions, electrical characteristics, timing information, and application guidance for the 25 MHz PC peripheral clock. It is the preferred source for layout and signal-integrity decisions, while distributor product pages are useful for availability and ordering information.
Where is the pinout for the ICS411MLF?
The ICS411MLF pinout is defined by the pin-description table in the Renesas manufacturer datasheet. The device uses an 8-SOIC package, so its footprint and numbering correspond to that package configuration. Use the datasheet table when assigning supply, ground, reference-input, and clock-output connections, and use the package drawing to confirm physical orientation before PCB release.
Can the ICS411MLF be used in a 3.3 V PC peripheral design?
Yes, the ICS411MLF is suitable for a 3.3 V design because its specified 3 V to 3.6 V supply range includes a nominal 3.3 V rail. Its 25 MHz output and 8-SOIC package fit established PC peripheral clock trees. The final decision still depends on the receiver's voltage thresholds, clock-loading requirements, board timing budget, and the clock-amplitude specification in the manufacturer datasheet.
Does the ICS411MLF need programming to produce a clock?
No, the ICS411MLF is a fixed 25 MHz peripheral clock generator and does not require programming to set its output frequency. This simplifies firmware and board bring-up compared with a programmable clock synthesizer. Applications requiring selectable output frequencies, user-adjustable rate settings, spread-spectrum control, or fractional-N synthesis need a different clock-generator architecture.
What are the key specifications of the ICS411MLF that engineers should know?
The key ICS411MLF specifications are a 25 MHz output, a 3 V to 3.6 V operating supply range, and an 8-SOIC surface-mount package. The device is categorized as a PC peripheral clock synthesizer and is specifically described for cost-sensitive motherboard and peripheral applications. Its fixed-frequency architecture reduces component count and control complexity, while the compact eight-pin package supports standard surface-mount assembly.
What can replace the ICS411MLF?
A drop-in replacement for the ICS411MLF must provide a 25 MHz clock through the same 8-SOIC footprint with compatible supply, output-level, and timing behavior. Pin compatibility alone is not sufficient because clock amplitude, load drive, reference-input requirements, and output jitter determine whether a substitute works without redesign. Use the Renesas cross-reference resources and manufacturer datasheets to identify an exact or qualified replacement for the target board.
Is the ICS411MLF the same as other 25 MHz clock generators?
No, being labeled a 25 MHz clock generator does not make the ICS411MLF interchangeable with every other 25 MHz device. A genuine drop-in alternative must match the 8-SOIC land pattern and pin functions while remaining close to the 3 V to 3.6 V supply and reference-input characteristics. Compare the full electrical specification and timing budget rather than frequency alone.
Where can I buy the ICS411MLF online?
The ICS411MLF can be requested through the Request a Quote form on this page for current commercial terms, supply status, and lead-time confirmation. The part is listed as an 8-SOIC, tube-packaged device by Renesas Electronics and appears in authorized distribution catalogs. Use the quote form rather than relying on a historical distributor listing when production availability must be confirmed.
What is the current price of the ICS411MLF?
Current commercial terms for the ICS411MLF are available through the Request a Quote form on this page. Pricing for catalog ICs can vary with order quantity, supply status, date code, and packaging configuration, so the form is the appropriate route for a current quotation. Request the quantity, tube packaging requirement, target date code, and destination in the quote request.
What is the lead time for the ICS411MLF?
The current lead time for the ICS411MLF should be confirmed through the Request a Quote form on this page. Lead time depends on factory inventory, scheduled production, and the quantity requested, so a current quotation is more reliable than a historical catalog record. Provide your required quantity and target schedule when submitting the request.
Is the ICS411MLF currently in stock?
Current stock status for the ICS411MLF should be confirmed through the Request a Quote form on this page. The part has historically appeared in distributor catalogs, but that does not establish current inventory at the required quantity. Include your forecast, order quantity, and required ship date in the quote request so availability can be matched to your schedule.
When should I choose the ICS411MLF instead of a programmable clock generator?
Choose the ICS411MLF when the design requires a fixed 25 MHz PC peripheral clock and can benefit from lower component count without programmable frequency control. It is appropriate for established motherboard and peripheral clock trees running from a 3 V to 3.6 V supply. Choose a programmable or fractional-N generator instead when multiple frequencies, adjustable outputs, spread-spectrum control, or software-managed clocking is required.
What design checks should be performed before using the ICS411MLF?
Verify the 3 V to 3.6 V supply requirement, 25 MHz output frequency, output amplitude, load capability, reference configuration, and timing budget against the manufacturer datasheet. Keep the clock trace short and provide a local supply bypass capacitor. These checks are essential because a frequency-compatible clock can still fail to interoperate if its logic levels, drive strength, or phase relationship differs from the receiver's requirements.

エンジニアリング参考データ: ICS411MLF — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ICS411MLF when the target platform requires a fixed 25 MHz PC peripheral clock, operates from a 3 V to 3.6 V supply, and benefits from a low-component-count clock tree. Its 8-SOIC package is convenient for established motherboard, storage-interface, peripheral-adapter, and legacy digital designs, and no programming is needed to set the output frequency. Choose a programmable clock generator when the design requires selectable output rates, multiple derived clocks, spread-spectrum control, or software-managed clock settings. Before approving any substitute, confirm the same land pattern, pin functions, output amplitude, load capability, duty cycle, reference configuration, and timing budget. The fixed 25 MHz ICS411MLF should not be selected solely because another device also produces 25 MHz.

代替品との比較

パラメータ この製品
Brand Renesas Electronics
Package 8-SOIC
Function PC peripheral clock synthesizer
Output Frequency 25 MHz
Supply Voltage Range 3 V to 3.6 V
Frequency Control Fixed
Mounting Type Surface mount
Packaging Tube
Primary Application PC motherboard and peripheral clocking

主な差別化要因

  • Fixed-frequency implementation reduces clock-tree complexity (vs Programmable 25 MHz clock-generator alternatives)
  • Compact eight-pin implementation for conventional PCB assembly (vs Larger clock-generator packages)
  • Direct fit for nominal 3.3 V PC peripheral rails (vs Clock generators limited to narrower supply ranges)

設計ノート

Place the ICS411MLF close to the circuit that receives its 25 MHz output, and route the clock net as a short, controlled-impedance trace. Avoid long stubs or unnecessary test points that can create reflections on this clock edge. Keep the device supply bypass capacitor immediately adjacent to the supply and ground pins, with a short ground return, to reduce supply-induced clock disturbance.

Confirm the receiver's minimum clock amplitude, duty-cycle limits, input pulse-width requirement, and setup or hold timing against the manufacturer datasheet. A nominal 25 MHz match is not sufficient for a drop-in decision because clock thresholds and edge quality determine whether the receiver samples the reference reliably. Preserve a continuous ground path beneath the device and avoid crossing the clock trace with high-current switching paths.

Do not treat the ICS411MLF as a programmable clock generator or assume that any 25 MHz oscillator is interchangeable. Verify the 3 V to 3.6 V supply range, reference-input arrangement, output-load capability, and eight-pin SOIC pin functions before substitution. Also confirm whether the board requires tube packaging or an alternate shipping format when placing a production order.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No definitive RoHS, REACH, halogen-free, or conflict-minerals statement was identified in the available manufacturer and distributor records. AEC-Q100 qualification is not applicable to this PC peripheral clock device.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ICS411MLF ICS411MLF datasheet ICS411MLF datasheet pdf ICS411MLF pinout ICS411MLF 25MHz clock ICS411MLF 8-SOIC package ICS411MLF equivalent ICS411MLF drop-in replacement ICS411MLF price ICS411MLF stock Renesas ICS411MLF ICS411MLF PC peripheral clock ICS411MLF schematic

関連部品&用語

Renesas Electronics ICS411MLF ICS411 25 MHz PC peripheral clock clock synthesizer clock generator fixed-frequency oscillator clock and timing integrated circuit Integrated Circuits 8-SOIC SOIC package surface mount SMD 3 V to 3.6 V supply 3.3 V rail PC motherboard peripheral interface clock tree reference clock jitter duty cycle controlled-impedance routing supply bypass capacitor
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示