ラストタイムバイのお知らせ: ICS525-01R は生産終了が近づいています。最終注文日: お問い合わせ. 利用可能な代替部品を見る →
Renesas Electronics

ICS525-01R - 160MHz User-Configurable Clock | Renesas

部品番号: ICS525-01R ⚠ ラストタイムバイ
28-pin SSOP, 0.154 inch (3.90 mm) width Package 160 MHz Speed
MOQ: 1 |

ICS525-01R 概要

The Renesas ICS525-01R is a user-configurable clock generator and fanout distribution IC with a maximum output frequency of 160 MHz, housed in a 28-pin SSOP package measuring 0.154 inch (3.90 mm) wide. The device is designed to replace discrete crystal-oscillator arrangements in systems where multiple logic domains require accurate, mutually related clock signals.

A user-configurable clock, commonly called OSCaR, is a clock-generation IC whose output configuration is established with hardware select pins rather than a fixed factory divider ratio. The ICS525-01/02 family accepts a crystal or clock input and can generate nearly any supported output frequency from that source. Grounding or floating the configuration pins selects the required operating mode, making the ICS525-01R useful where the design must be adjusted without changing external components.

Key features include a 160 MHz maximum output frequency, single-clock fanout capability, configuration through select pins, and operation from either a crystal or an external clock source. The 150 mil-body, 28-pin SSOP construction provides enough routing flexibility for a clock tree while remaining compatible with established surface-mount assembly methods. The -01R ordering suffix identifies the 160 MHz configuration within the ICS525 family.

The ICS525-01R is part of the ICS525-01/02 family, whose architecture replaces a conventional crystal oscillator plus a separate divider or fanout arrangement with one configurable clock circuit. Its select-pin control allows a board designer to define the clock relationship required by processors, transceivers, converters, and data-conversion equipment. This integration reduces the number of discrete timing components while preserving accurate frequency relationships across the system.

Typical uses include retrofitting a clock into an existing board, generating related clocks for multiple digital loads, supporting communication interfaces, and producing clocks for converters or test equipment. Because the family supports both crystal and external-clock drive, the device can suit new designs and legacy repairs where an original oscillator configuration is difficult to source.

When assigning a replacement, confirm the selected frequency table, input-source arrangement, and output configuration against the board's original design. Place the clock source and decoupling close to the device, and route clock outputs as short, controlled-impedance traces. The select pins must be left grounded or floating as specified by the configuration table; do not add pull-up or pull-down resistors unless the board design requires them.

This page adds practical configuration guidance, verified package and frequency information, a drop-in comparison, and sourcing guidance to the basic manufacturer datasheet information, helping engineers evaluate the ICS525-01R for both new designs and legacy clock-tree repairs.

ドロップイン代替品: ICS525-01R — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

525-01RILF

✅ ドロップイン
📦 28-SSOP
Same 28-SSOP footprint and pin configuration; maximum output frequency is 140 MHz versus 160 MHz (-12.5%).

📋 参考代替品(カタログ未掲載)

525-01RLF

✅ ドロップイン
📦 28-SSOP
Identical package, terminals, and principal functional characteristics to ICS525-01R according to the cross-reference listing.

📋 参考代替品(カタログ未掲載)

ICS525-01RI

✅ ドロップイン
📦 28-SSOP
Same 28-SSOP family footprint; maximum output frequency is 140 MHz versus 160 MHz (-12.5%).

📋 参考代替品(カタログ未掲載)

ICS525-01R 仕様

Product Type User-configurable clock generator and fanout distribution IC
Maximum Output Frequency 160 MHz
Number of Clock Outputs 1 output
Input Sources Crystal or external clock input
Configuration Method Select pins grounded or floated
パッケージ 28-pin SSOP, 0.154 inch (3.90 mm) width
Package Body 150 mil body
実装タイプ Surface mount
Output Frequency Configuration Nearly any supported output frequency from the selected input

ICS525-01R 150 mil body ピン配置ガイド

ICS525-01R (150 mil body パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ICS525-01R の 150 mil body パッケージピン配置図

詳細なピン配置データはありません: ICS525-01R.

詳細は データシート をご参照ください。

主な用途

ICS525-01R の用途: 6 件s: Legacy Crystal-Oscillator Replacement, Multi-Domain Digital Clock Distribution, Data-Conversion System Clocking, Communication Interface Clocking, Industrial Control Module Timing, Test and Measurement Equipment.

🔧

Legacy Crystal-Oscillator Replacement

The ICS525-01R is suited to replacing a discrete crystal oscillator when the replacement board must preserve an established clock architecture. It can accept a crystal or external clock input, and its select pins define the relationship between the reference and the generated output. The 160 MHz maximum output gives adequate headroom for legacy processor, bus, and controller timing domains. The important qualification is that the original reference frequency, crystal load network, configuration pins, and output routing must be reproduced. This makes the device particularly useful for repair and modernization programs involving older equipment that still relies on a 28-pin SSOP clock circuit.

🌐

Multi-Domain Digital Clock Distribution

The ICS525-01R fits clock-distribution work where related clock signals are needed across several digital blocks but a multi-output clock generator would be unnecessary. Its single configurable output, supported by the ICS525-01/02 selection method, can replace separate oscillator and divider arrangements. Configuration is established by grounding or floating the select pins rather than adding external programming components. The 160 MHz capability supports demanding digital subsystems while the 28-pin SSOP package provides enough physical routing room for clock input, selection, and output connections in an established surface-mount layout.

📺

Data-Conversion System Clocking

The ICS525-01R can supply the sampling clock for a mixed-signal or data-conversion subsystem that requires a known relationship between a crystal reference and its digital processing clock. With a maximum output frequency of 160 MHz, it covers the clocking requirements of many converters and interface blocks while occupying one 28-pin SSOP position. The design advantage is configurability: select-pin settings allow the same board architecture to cover different clock relationships. When using the part with high-speed converters, keep clock traces short, provide the specified decoupling, and confirm output-edge requirements and jitter in the manufacturer datasheet before final sign-off.

🌐

Communication Interface Clocking

The ICS525-01R is applicable to communication equipment that needs a configurable clock reference alongside a crystal-based backplane or transceiver architecture. Its ability to derive a supported output from a crystal or external clock input makes it useful for maintaining clock relationships across legacy serial interfaces. The 160 MHz maximum output frequency supports high-rate digital processing, while the single-output configuration avoids unnecessary fanout logic when only one derived clock is required. Validation should include margin for the interface's reference tolerance, the exact select-pin state, clock-edge requirements, and the maximum loading presented by the connected transceiver.

🏭

Industrial Control Module Timing

The ICS525-01R can serve industrial control modules that retain an SSOP-based clock design and need a replaceable timing source. Its configurable operating modes help accommodate different processor, counter, and communication clock requirements without redesigning the entire clock tree. The 28-SSOP package is particularly useful where board area is constrained and a converter with a larger footprint is undesirable. For industrial equipment, qualify the exact configuration at the temperature extremes and verify supply tolerance, startup behavior, and clock-edge margins. The part is a practical maintenance solution for obsolete controller boards where a fixed modern oscillator would require a different footprint.

🖥️

Test and Measurement Equipment

The ICS525-01R is suitable for test and measurement equipment that derives a precise operating clock from a crystal-controlled reference. The configurable architecture makes it possible to reproduce several clock relationships while retaining one package and board footprint, which is helpful in aging instruments and modular test platforms. A 160 MHz ceiling supports fast logic and interface sections, although the exact output must remain within the frequency limit of the selected 525-01 configuration. Instrument designers should pay particular attention to jitter, edge rates, and ground-return design when the clock drives sensitive conversion or measurement circuitry.

What is the ICS525-01R clock generator used for?
The ICS525-01R is a user-configurable clock generator and fanout distribution IC designed to produce a high-quality clock from a crystal or external clock input. According to the Renesas 525-01/02 datasheet, its configuration can be changed by grounding or floating the select pins, allowing one device to support nearly any supported output frequency from the selected input. It is useful when replacing a discrete crystal oscillator, divider, or multi-load clock tree with one configurable timing device.
What is the maximum clock frequency of the ICS525-01R?
The ICS525-01R supports a maximum output frequency of 160 MHz. DigiKey identifies the device as a 160 MHz clock generator and fanout distribution IC with one output in a 28-pin SSOP package. The achievable operating frequency also depends on the selected input source and configuration table in the Renesas 525-01/02 datasheet, so both the input reference and the programmed select-pin state must be verified for the intended clock tree.
Where can I download the ICS525-01R datasheet PDF?
The official Renesas datasheet for the ICS525-01/02 family is available from the manufacturer product document page at the datasheet link on this page. The document describes the user-configurable clock architecture, select-pin settings, supported input arrangements, and package information. It is the preferred document for frequency tables and pin assignments, while the 28-pin SSOP outline can also be checked against the manufacturer package drawing before a mechanical replacement is released.
Where can I find the ICS525-01R pinout?
The ICS525-01R pinout should be taken from the pin-description and configuration tables in the Renesas 525-01/02 datasheet. The device uses a 28-pin SSOP package, but the select pins, crystal connections, and clock output assignments must be matched to the exact configuration used by the original circuit. Use the package drawing and pin table together when checking board tracks, and do not infer unused or configurable connections from the package position alone.
Is the ICS525-01R a drop-in replacement for a crystal oscillator?
The ICS525-01R can replace a conventional crystal-oscillator arrangement when the board supplies the required reference source, select-pin configuration, load network, and decoupling. Renesas describes the OSCaR concept as a way to generate high-quality clock outputs from an inexpensive crystal or clock input. It is not a literal two-pin swap for every oscillator: the original schematic must provide compatible input and output connections and the correct configuration state.
Can the ICS525-01R replace the 525-01RILF?
The 525-01RILF and ICS525-01R are closely related members of the same Renesas clock-generator family and use the same 28-pin SSOP package. The 525-01RILF listing identifies a 140 MHz maximum output frequency, while the ICS525-01R is identified as a 160 MHz version. Before exchanging the devices, compare the required operating frequency, input reference, select-pin settings, and electrical limits in the shared 525-01/02 datasheet.
What is the difference between ICS525-01R and ICS525-01RI?
ICS525-01R is identified as the 160 MHz configuration, while ICS525-01RI is identified as a 140 MHz version; both use a 28-pin SSOP package and belong to the same configurable-clock family. The 140 MHz part may suit designs whose required clock and associated timing specifications remain within its lower limit. The IC and configuration requirements should determine the choice, and the original board's select-pin state must be reproduced exactly.
Is ICS525-01R suitable for a legacy clock-tree repair?
Yes, the ICS525-01R is suitable for many legacy clock-tree repairs because it can operate from a crystal or external clock input and offers user-selectable configurations. It is especially useful where the original oscillator or a dedicated fanout device is no longer readily available. A successful repair still requires matching the input reference frequency, output routing, load capacitance, select-pin states, and supply requirements to the original circuit.
How do I choose the correct ICS525-01R configuration?
Choose the configuration by starting with the required output frequency and working backward to the available crystal or external clock input. The Renesas 525-01/02 datasheet provides the supported frequency relationships and select-pin tables. Then verify the output-load requirement, supply voltage, timing margins, and board layout. Floating or grounding a select pin selects a documented mode; arbitrary resistor values on those pins are not part of the configuration method.
What are the key specifications of ICS525-01R that engineers should know?
The principal identifiers for the ICS525-01R are its 160 MHz maximum output frequency, single clock output, user-selectable configuration, and 28-pin SSOP package with a 150 mil body and 3.90 mm width. The Renesas 525-01/02 datasheet identifies the device as a flexible way to generate high-accuracy, high-frequency clock outputs from a crystal or clock input. Supply voltage, temperature range, jitter, and timing-edge limits must be taken directly from the datasheet before release.
What can replace the ICS525-01R?
The closest documented replacements are the same-package Renesas 525-01RILF and 525-01RLF, which FindIC identifies as having consistent terminals, packages, and main performance characteristics. ICS525-01RI is another 28-pin SSOP family member with a lower 140 MHz maximum frequency. These options share the package, but frequency capability, configuration state, and operating limits still have to be checked against the clock requirements of the original board.
Is there a cross-brand drop-in equivalent for the ICS525-01R?
No verified cross-brand, pin-compatible equivalent was identified for the ICS525-01R. The available cross-reference results point to Renesas family members and the original 525-01/02 datasheet rather than a competing manufacturer offering the same 28-pin configuration. A cross-brand substitute should not be assumed merely because another clock generator uses a similar package; select-pin assignments, frequency tables, input architecture, and output behavior must be compared explicitly.
Where can I buy the ICS525-01R?
The ICS525-01R is a legacy clock-generation component with remainder availability rather than a broadly stocked current production item. Use the Request a Quote form on this page to request current price, minimum order quantity, stock, and delivery information for the exact ICS525-01R ordering code. A distributor listing may still show historical inventory, but confirm date code, condition, and quantity before committing the part to a production build.
What is the lead time for the ICS525-01R?
Lead time for the ICS525-01R depends on remaining factory or channel inventory because the device is identified as a discontinued item with only remainder stock available. Request the current lead time through the Request a Quote form on this page, and specify whether the quantity is for prototype repair, small-build maintenance, or larger legacy production. For obsolete timing devices, maintaining a qualified second source or stocking critical spares reduces assembly risk.
Is the ICS525-01R currently in stock?
Availability for the ICS525-01R is limited to remaining inventory, and the listed stock quantity can change quickly. Use the Request a Quote form on this page for a current stock check rather than relying on an old catalog count. When requesting the quote, specify the required quantity, date-code preference, and whether traceability documentation is needed for industrial or medical equipment.

エンジニアリング参考データ: ICS525-01R — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ICS525-01R when the original circuit requires the 160 MHz version of the 525-01 configurable-clock family and remainder stock is acceptable for a legacy repair or small build. Select 525-01RILF or ICS525-01RI when the required operating frequency remains at or below 140 MHz and the same 28-pin SSOP configuration is confirmed. Consider 525-01RLF when its frequency table matches the application and the cross-reference data is acceptable for the qualification program. None of these options should be selected solely by package shape: compare input architecture, select-pin states, output loading, timing limits, supply conditions, and temperature requirements. For new high-volume production, a currently supported clock generator may offer better lifecycle assurance, but it can require a board respin. For repair and maintenance of legacy 28-SSOP equipment, the ICS525-01R is generally the first choice when the 160 MHz limit and original configuration are confirmed.

代替品との比較

パラメータ この製品 525-01RILF 525-01RLF ICS525-01RI
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 28-SSOP 28-SSOP 28-SSOP 28-SSOP
Product Type Clock generator, fanout distribution IC Clock generator, fanout distribution IC User-configurable clock Clock generator, fanout distribution IC
Input Source Crystal or clock input Crystal or clock input Crystal or clock input Crystal or clock input
Configuration Method Select pins grounded or floated Select-pin configuration Select-pin configuration Select-pin configuration
Package Body Width 150 mil (3.90 mm) 150 mil (3.90 mm) 150 mil (3.90 mm) 150 mil (3.90 mm)

主な差別化要因

  • Higher documented maximum output frequency than the 140 MHz family alternatives (vs 525-01RILF)
  • Selectable clock configuration within the same 28-pin SSOP footprint (vs ICS525-01RI)
  • Documented terminal and package consistency for replacement designs (vs 525-01RLF)

設計ノート

Reproduce the original reference-clock topology before fitting the ICS525-01R. Confirm whether the circuit uses a crystal or an external clock source, retain the required load components, and place them close to the device pins. Configuration is established by grounding or floating the select pins, so leave those nets in their documented states. Also preserve the original ground-return arrangement around the clock source, because long crystal or reference-clock traces can make an otherwise compatible replacement unstable.

Route the clock output as a short, controlled-impedance trace with a continuous ground reference and avoid unnecessary test pads or stub branches. The ICS525-01R can operate at up to 160 MHz, where edge rate and return-path discontinuities can create reflections or coupling into adjacent signals. Confirm the load capacitance and maximum clocking requirements of the connected block, then use the output-edge and capacitive-load limits from the manufacturer datasheet to determine whether series damping or an external buffer is required.

Do not treat the similar 525-01 and 525-02 family members as interchangeable without checking the configuration table. A replacement is valid only when the input source, output frequency, select-pin states, supply requirements, and timing limits match the original circuit. In particular, the documented 140 MHz alternatives do not meet a design that requires the ICS525-01R's full 160 MHz range. Validate startup and maximum-frequency operation in the final board rather than relying solely on package compatibility.

Provide local bypass capacitance exactly as specified in the manufacturer application guidance and keep the supply return path short. The clock generator's supply reference should share a low-impedance ground region with the digital circuitry it clocks, avoiding long current loops between bypass components and pins. Because this is a legacy remainder-market device, confirm that the exact manufacturer configuration and lot are available before committing a design, and qualify the replacement across its required voltage and temperature conditions.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The ICS525-01R is identified as a discontinued item with only remainder stock available. Compliance declarations are not stated on the distributor pages and should be confirmed with Renesas for the exact lot before use in new regulated production.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ICS525-01R datasheet ICS525-01R datasheet pdf ICS525-01R pinout ICS525-01R equivalent ICS525-01R replacement ICS525-01R cross reference ICS525-01R 28-SSOP ICS525-01R 160MHz clock Renesas ICS525-01R ICS525-01R price ICS525-01R stock ICS525-01R vs 525-01RILF

関連部品&用語

Renesas Electronics ICS525-01R 525-01RILF 525-01RLF ICS525-01RI user-configurable clock OSCaR clock generator fanout distribution IC clock & timing IC integrated circuit semiconductor 28-SSOP SSOP package family surface-mount package crystal oscillator external clock input select pin clock frequency digital clock tree frequency divider legacy equipment repair signal integrity clock jitter
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示