Texas Instruments

INA155UG4 - 550 kHz R-R CMOS INA | Texas Instruments

部品番号: INA155UG4 ✓ 生産中
2.7 V to 5.5 V Vdss 8-pin SOIC Package
MOQ: 1 |

INA155UG4 概要

The Texas Instruments INA155UG4 is a single-supply, rail-to-rail-output CMOS instrumentation amplifier with 200 uV input offset voltage, 6.5 V/ms slew rate, and 550 kHz bandwidth, packaged in an 8-pin SOIC. Designed for low-voltage signal acquisition, it amplifies differential sensor signals while operating from a 2.7 V to 5.5 V supply.

An instrumentation amplifier is a precision analog amplifier category designed for differential measurement systems. Its internal topology provides input common-mode rejection and gain-setting functions in a compact package. The INA155 belongs to the broader CMOS analog amplifier, signal-conditioning IC, and power-management-aware semiconductor hierarchy, making it suitable for sensor interfaces, current measurement, and compact data-acquisition systems.

The INA155UG4 provides rail-to-rail output swing, allowing the amplified signal to approach the supply limits. Its 550 kHz bandwidth supports moderate-frequency measurement signals, while the 6.5 V/ms slew rate helps preserve large-signal response. The low 200 uV input offset specification is important when measuring small differential voltages because offset error directly shifts the amplified result. A single 2.7 V to 5.5 V supply simplifies integration with low-voltage sensors and mixed-signal systems.

The CMOS implementation is optimized for low-voltage, single-supply operation. Rail-to-rail output operation improves usable output range without requiring a bipolar supply, although input and output headroom still depends on gain, load, supply voltage, and operating conditions. The INA155 family is intended for general-purpose differential amplification and for driving sampling analog-to-digital converters when signal bandwidth and settling behavior satisfy the converter requirements.

Typical uses include bridge-transducer interfaces, low-voltage current sensing, portable instrumentation, industrial measurement, medical monitoring, and general sensor conditioning. In these applications, the INA155UG4 converts a small differential input into a larger single-ended voltage suitable for an ADC, comparator, or downstream measurement circuit. Its 550 kHz bandwidth is appropriate for sensors whose useful signal content remains well below that frequency.

A key design consideration is to verify the selected gain against the device’s gain bandwidth and output-swing limits. Keep the input and return paths short, use a clean low-noise supply, and connect the reference or return input to the appropriate analog-ground point. Check the external gain-setting implementation against the manufacturer’s recommended resistance and layout guidance before sampling fast or low-amplitude signals.

ドロップイン代替品: INA155UG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: INA155UG4 (同一形状・フットプリント) — 相違点: Product Type, Input Offset Voltage, Input Type, Output Swing, Output Type.

Texas Instruments
Input Type: Differential instrumentation-amplifier input
Output Type: Rail-to-rail output
比較対象 INA155UG4 →
Texas Instruments
Product Type: Single-supply CMOS instrumentation amplifier
Input Offset Voltage: 1 mV
Output Swing: Rail-to-rail output
比較対象 INA155UG4 →

INA155U

✅ ドロップイン
Texas Instruments
📦 8-pin SOIC
CMOS instrumentation amplifier · 1 circuit · 5.5 V maximum single supply · Single supply · 550 kHz · 1 mV · Rail-to-rail output · Differential instrumentation-amplifier input

価格はお問い合わせください

データシートを見る →

INA155UA

✅ ドロップイン
Texas Instruments
📦 8-pin SOIC
Single-supply CMOS instrumentation amplifier · 1 circuit · 2.5 V to 6 V · 5.5 V · 550 kHz · 1 mV · Rail-to-rail output · 6.5 V/us

価格はお問い合わせください

データシートを見る →

INA155U/2K5

✅ ドロップイン
📦 8-pin SOIC
Same 550 kHz bandwidth and 8-pin SOIC format; the gain-setting configuration differs from INA155UG4, with no numerical gain delta stated in the cross-reference excerpt.

📋 参考代替品(カタログ未掲載)

INA155UG4 最大定格&電気的特性

Product Type CMOS instrumentation amplifier
Number of Amplifiers 1 circuit
Supply Voltage Range 2.7 V to 5.5 V
Supply Configuration Single supply
Input Offset Voltage 200 uV
Gain Range Up to 50 dB
Bandwidth 550 kHz
Slew Rate 6.5 V/ms
Output Swing Rail-to-rail
Input Type Differential input
出力タイプ Single-ended rail-to-rail output
パッケージ 8-pin SOIC
実装タイプ Surface mount
Process Technology CMOS

INA155UG4 8-pin soic ピン配置ガイド

INA155UG4 (8-pin soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

INA155UG4 の 8-pin soic パッケージピン配置図

詳細なピン配置データはありません: INA155UG4.

詳細は データシート をご参照ください。

主な用途

INA155UG4 の用途: 6 件s: Low-Voltage Current Sensing, Bridge Transducer Conditioning, Portable Medical Monitoring, Battery-Powered Sensor Interface, Industrial Data Acquisition, General Sensor Signal Conditioning.

⚡

Low-Voltage Current Sensing

The INA155UG4 is well suited to amplifying the small differential voltage produced by a low-side current-sense element in a 2.7 V to 5.5 V system. Its 200 uV input offset specification limits the input-referred error contribution, while the 550 kHz bandwidth accommodates many measurement, protection, and telemetry signals. Place the sense amplifier near the shunt when trace length could add resistance or pickup. Confirm the output swing and common-mode limits at the selected gain, then connect the amplified voltage to an ADC input or comparator.

🏭

Bridge Transducer Conditioning

A resistive bridge produces a small differential signal that requires amplification before digitization. The INA155UG4 provides differential amplification, rail-to-rail output, and a 6.5 V/ms slew rate from a single 2.7 V to 5.5 V supply, making it appropriate for compact bridge-based pressure, force, and position interfaces. Keep bridge excitation and the amplifier supply clean, route the differential inputs symmetrically, and verify that the operating gain remains within the bandwidth and output-swing limits.

💊

Portable Medical Monitoring

Portable monitoring equipment often operates from a 3.3 V or 5 V rail while conditioning low-level physiological or diagnostic sensor signals. The INA155UG4 combines a 2.7 V to 5.5 V supply range, 200 uV input offset voltage, and rail-to-rail output to preserve signal amplitude in a restricted board area. Its 550 kHz bandwidth is suitable for many slow sensor waveforms. The final design must also satisfy the applicable medical-system safety, EMC, and validation requirements for the complete equipment.

📱

Battery-Powered Sensor Interface

Battery-powered sensor nodes benefit from analog circuits that operate from a low single supply without requiring negative rails. The INA155UG4 accepts 2.7 V to 5.5 V and provides rail-to-rail output swing, helping utilize the available supply range when amplifying differential sensor signals. The 6.5 V/ms slew rate supports non-alternating waveforms with moderate frequency content. Verify input common-mode range and output headroom at the minimum battery voltage, and use a low-noise supply path to avoid degrading sensor accuracy.

🖥️

Industrial Data Acquisition

The INA155UG4 can condition differential inputs from industrial sensors before they enter a sampling analog-to-digital converter. Its 550 kHz bandwidth and 6.5 V/ms slew rate are useful for moderate-bandwidth process and equipment measurements, while the 200 uV input offset specification supports precision-focused acquisition. Maintain short, symmetric input traces, reference analog ground correctly, and check the converter’s input range. A post-amplifier or filter may be required when the sensor bandwidth exceeds the amplifier’s gain-dependent response.

🧩

General Sensor Signal Conditioning

The INA155UG4 serves as a general-purpose differential signal-conditioning amplifier for compact measurement systems. Its 8-pin SOIC package, 2.7 V to 5.5 V supply range, and rail-to-rail output simplify integration with low-voltage analog and mixed-signal circuits. Use the device when the source is differential and the required signal bandwidth is compatible with the configured gain. Grounding, reference-pin connection, feedback layout, and output loading must follow the manufacturer’s recommended application circuit to preserve offset and settling performance.

What is the INA155UG4?
The INA155UG4 is a single-supply, rail-to-rail-output CMOS instrumentation amplifier from Texas Instruments. According to the TI product page, it operates from 2.7 V to 5.5 V, offers 550 kHz bandwidth, and has 200 uV input offset voltage. The 8-pin SOIC package is intended for low-voltage differential sensor conditioning, current measurement, and analog-to-digital converter input stages where a compact, rail-to-rail-output amplifier is useful.
What are the key specifications of INA155UG4 that engineers should know?
The INA155UG4 combines a 2.7 V to 5.5 V supply range, 550 kHz bandwidth, 6.5 V/ms slew rate, 200 uV input offset voltage, and rail-to-rail output in an 8-pin SOIC package. According to the Texas Instruments INA155 product information, these characteristics make the device suitable for low-voltage differential amplification and sampling-adjacent measurement circuits. Its gain can extend to 50 dB, depending on the configured device variant.
Where can I download the INA155UG4 datasheet PDF?
Download the INA155UG4 documentation from the official Texas Instruments INA155 product page at https://www.ti.com/product/INA155. The manufacturer page provides the datasheet, ordering information, parameters, and support documents. The same device also appears in the INA155 datasheet indexed as a 17-page document, but engineers should use the TI-hosted document for the newest revision and application guidance.
Where can I find the INA155UG4 pinout?
The INA155UG4 pin configuration is shown in the pin-description table and package drawing within the TI INA155 datasheet. The device uses an 8-pin SOIC package. Use the manufacturer pin table when assigning supply, ground, input, reference, feedback, and output connections because the exact gain configuration and package suffix determine the final connection details for the selected orderable part.
What is the supply voltage range of INA155UG4?
The INA155UG4 operates from 2.7 V to 5.5 V in a single-supply configuration. According to the TI INA155 product-page summary, this low-voltage range supports battery-powered instruments, portable sensors, and mixed-signal systems operating from 3.3 V or 5 V rails. Designers should still confirm output swing, input common-mode range, and required gain against the manufacturer’s operating curves.
What is the bandwidth and slew rate of INA155UG4?
The INA155UG4 provides 550 kHz bandwidth and a 6.5 V/ms slew rate. According to the Texas Instruments device description, this bandwidth supports moderate-frequency differential signals and the part can drive sampling analog-to-digital converters when converter input requirements are satisfied. Actual usable bandwidth depends on the configured gain, load, signal amplitude, and settling tolerance.
Can INA155UG4 be used with a 3.3 V supply?
Yes, the INA155UG4 supports a 3.3 V supply because its specified operating range is 2.7 V to 5.5 V. According to the TI product information, its rail-to-rail output is optimized for low-voltage single-supply operation. Confirm that the selected gain, output load, and input signals remain within the device’s common-mode and output-swing limits at 3.3 V.
Is INA155UG4 suitable for sensor signal conditioning?
The INA155UG4 is suitable for low-voltage differential sensor conditioning because it combines 200 uV input offset voltage, rail-to-rail output, and a 2.7 V to 5.5 V supply range. According to the manufacturer’s product description, the amplifier is optimized for low-voltage single-supply systems. It is especially relevant for bridge, current-sense, and portable-sensor interfaces whose bandwidth does not exceed the device’s gain-dependent response.
What is the difference between INA155UG4 and INA155U?
The INA155UG4 and INA155U belong to the same Texas Instruments INA155 family and are associated with the same 550 kHz, rail-to-rail CMOS instrumentation-amplifier performance class. The manufacturer ordering information distinguishes their orderable configurations, while the searched comparison identifies both as 8-SOIC devices. Verify the exact gain option, marking code, and production suffix against the TI ordering table before treating one as a replacement.
When should I choose INA155UG4 over INA155UA or INA155U/2K5?
Choose INA155UG4 when you need the specific 8-pin SOIC orderable configuration associated with the INA155UG4 marking and your design’s gain implementation. Choose INA155UA or INA155U/2K5 only after confirming their exact gain, feedback, and pin behavior against the TI datasheet. These family members can simplify sourcing within one device family, but a family relationship alone does not guarantee identical configuration.
What is the best drop-in replacement for INA155UG4?
The best drop-in replacement is the INA155 family member with the same 8-pin SOIC footprint, identical gain configuration, and matching electrical limits. INA155U is a documented same-family candidate, but its exact ordering configuration must be checked before substitution. Cross-brand replacements should be selected only after a manufacturer-documented pinout and gain comparison confirms compatibility; the available cross-reference results do not establish five qualified substitutes.
Is INA155UA the same as INA155UG4?
No, INA155UA and INA155UG4 are distinct orderable part numbers within the same INA155 family. Both are associated with the Texas Instruments CMOS instrumentation-amplifier family and an 8-pin SOIC package, but the ordering suffix and gain configuration must be compared. According to the manufacturer ordering information for INA155, engineers should confirm the exact feedback connection and gain before treating either device as interchangeable.
What is the best Microchip equivalent for INA155UG4?
No Microchip equivalent can be identified as a verified drop-in replacement from the available manufacturer and cross-reference information. A suitable substitute must use the same 8-pin SOIC pinout and reproduce the required gain, bandwidth, supply range, offset, input common-mode range, and output-swing behavior. Request a component cross-reference review for a particular Microchip candidate rather than assuming that similar gain and bandwidth guarantees pin compatibility.
Where can I buy INA155UG4 online?
Use the Request a Quote form on this page to request INA155UG4 pricing, current availability, minimum order quantity, and lead time. The form provides a single purchasing channel without embedding a price that may change during sourcing. Include the required quantity, reel or cut-tape preference, delivery location, and target date in the request.
What is the price of INA155UG4?
Use the Request a Quote form on this page for the current INA155UG4 price and quantity-break structure. Pricing can vary with quantity, package form, market conditions, and inventory timing, so a static figure would age quickly. Submit the required order quantity and delivery details to obtain a current quotation for the exact 8-pin SOIC ordering code.
What is the lead time and stock status for INA155UG4?
Request the current INA155UG4 stock status, lead time, and minimum order quantity through the Request a Quote form on this page. The Texas Instruments product page identifies the INA155 family and its ordering information, but a live factory or channel commitment should be confirmed for the exact INA155UG4 suffix. Include your required quantity, packaging preference, and target delivery date in the request.

エンジニアリング参考データ: INA155UG4 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the INA155UG4 when the design requires a low-voltage, single-supply instrumentation amplifier with rail-to-rail output, 550 kHz bandwidth, and a stated 200 uV input offset. It is particularly appropriate for 3.3 V or 5 V sensor interfaces where the signal source is differential and the useful bandwidth is compatible with the configured gain. Choose INA155U when its exact ordering configuration matches the design and sourcing requirements, but verify the gain implementation before replacing the INA155UG4. Consider INA155UA or INA155U/2K5 only after confirming their pin connections and numerical gain differences against the TI ordering table. No cross-brand substitute should be treated as drop-in solely because it offers similar bandwidth or rail-to-rail output; the candidate must also match the 8-pin SOIC pinout, supply range, common-mode limits, offset, slew rate, and output behavior.

代替品との比較

パラメータ この製品 INA155U INA155UA INA155U/2K5
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments

主な差別化要因

  • The specified INA155UG4 configuration combines a 550 kHz bandwidth with a 6.5 V/ms slew rate in an 8-pin SOIC package. (vs INA155U)
  • Low-voltage single-supply operation is supported across a 2.7 V to 5.5 V range with rail-to-rail output. (vs INA155UA)
  • A 200 uV input offset specification supports error-conscious differential signal conditioning. (vs INA155U/2K5)

設計ノート

Route the two differential inputs symmetrically and keep them away from switching nodes and high-current paths. The INA155UG4 uses 200 uV input offset voltage, so mismatched input routing, leakage through board contamination, and unintended thermal gradients can become significant in precision measurements. Use a solid analog-ground reference, minimize loop area, and follow the pin-description table and recommended application circuit in the TI datasheet when assigning the reference and feedback connections.

Confirm usable bandwidth at the actual gain rather than relying only on the 550 kHz headline value. The INA155UG4 also offers a 6.5 V/ms slew rate, but large output steps, capacitive loading, and a low supply voltage can limit settling performance. For an ADC interface, compare the amplifier’s gain-dependent bandwidth and settling behavior with the converter’s acquisition window. Add filtering only when its phase and noise effects are included in the system error budget.

Design the single supply for 2.7 V to 5.5 V operation while preserving a low-noise analog path. Place bypass capacitance close to the supply pins and avoid routing the amplifier supply directly through digital load currents. Check output headroom at the minimum supply voltage and maximum intended load because rail-to-rail output improves range but does not guarantee zero output error at the supply rail. Use the manufacturer’s output-voltage-versus-load characteristics when sizing the remaining analog headroom.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No specific compliance certification or material declaration is stated in the referenced product information.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

INA155UG4 datasheet INA155UG4 datasheet pdf INA155UG4 pinout INA155UG4 specifications INA155UG4 equivalent INA155UG4 replacement INA155UG4 vs INA155U INA155UG4 price INA155UG4 stock Texas Instruments INA155UG4 INA155UG4 sensor signal conditioning INA155UG4 8-SOIC footprint

関連部品&用語

Texas Instruments INA155UG4 INA155 INA155U INA155UA INA155U/2K5 instrumentation amplifier CMOS analog amplifier signal-conditioning IC differential amplifier single-supply amplifier rail-to-rail output input offset voltage common-mode rejection ratio slew rate gain bandwidth 2.7 V to 5.5 V power supply 8-pin SOIC SOIC package family surface-mount package bridge sensor interface low-side current sensing analog-to-digital converter interface industrial data acquisition portable medical monitoring
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示