INA2137PAG4 - Dual ±6dB Audio Receiver | Texas Instruments
部品番号: INA2137PAG4 ✓ 生産中INA2137PAG4 概要
An audio differential line receiver is an analog amplifier that accepts two signal inputs and rejects voltage common to both inputs while amplifying the differential component. Within the signal-chain hierarchy, the INA2137 belongs to the receiver and amplifier class, where it sits between a balanced source, such as an audio converter or studio interface, and downstream single-ended audio circuitry. Its fixed ±6 dB gain makes it useful where standard-level balanced audio signals require predictable amplification.
Key characteristics include a 14 V/µs slew rate, 90 dB common-mode rejection, and maximum quiescent current of 2.9 mA. The device also provides fast settling to 0.01% and low distortion at 1 kHz. The available dual configuration gives two receiver channels in one package, reducing component count and helping maintain channel consistency in stereo, surround-sound, and professional audio systems.
The INA2137 family includes single and dual versions, with the selected INA2137PAG4 orderable configuration using a 14-pin PDIP package. Its broad ±18 V supply capability supports bipolar audio rails and higher headroom than conventional low-voltage line-level circuits. Designers should observe the absolute maximum supply ratings, maintain adequate input and output voltage ranges, and confirm output-swing limits against the selected supply configuration.
Typical uses include balanced professional-audio inputs, line-level differential signal conditioning, mixer input stages, multichannel audio equipment, and test instrumentation. The dual receiver is particularly appropriate when two balanced channels must be processed with matched amplification and common-mode rejection behavior. It can also precede an ADC, provided the engineer verifies input range, bandwidth, settling requirements, and system noise performance.
PCB implementation requires short input traces, a stable ground reference, and careful separation between the two receiver channels where low-level audio signals are present. Place bypass capacitors close to the supply pins and avoid routing input and output paths in parallel. Confirm the 14-pin numbering and pin functions in the manufacturer pin-description table before assigning tracks or external networks.
This product page consolidates the INA2137 family specifications, sourcing guidance, available package distinctions, and practical circuit considerations into one engineering reference. It is intended to support design reviews, prototype planning, signal-chain selection, and informed replacement decisions without obscuring the differences between package and temperature-ordering variants.
ドロップイン代替品: INA2137PAG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: INA2137PAG4 (同一形状・フットプリント) — 相違点: Package.
INA2137PA
✅ ドロップイン価格はお問い合わせください
データシートを見る →INA2137PAG4 最大定格&電気的特性
| Device Type | Dual audio differential line receiver |
| Channel Count | 2 channels |
| Gain | 1/2 or 2 (±6 dB) |
| Supply Voltage Range | ±18 V (36 V total) |
| Slew Rate | 14 V/µs |
| Common-Mode Rejection Ratio | 90 dB |
| Maximum Quiescent Current | 2.9 mA |
| Settling Accuracy | 0.01% |
| Distortion Test Frequency | 1 kHz |
| パッケージ | 14-pin PDIP |
| 実装タイプ | Through-hole |
| RoHS ステータス | unknown |
| REACH Status | unknown |
| Lead-Free Status | unknown |
INA2137PAG4 14-pin pdip ピン配置ガイド
INA2137PAG4 (14-pin pdip パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: INA2137PAG4.
詳細は データシート をご参照ください。
主な用途
INA2137PAG4 の用途: 6 件s: Balanced Professional Audio Input, Stereo Mixer Line Stage, Audio Interface Signal Conditioning, Multichannel Surround Audio, Broadcast and Studio Monitoring, Industrial Audio Test Equipment.
Balanced Professional Audio Input
The INA2137PAG4 fits a balanced professional-audio input because its selectable gain of 1/2 or 2 provides the required ±6 dB line-level amplification, while 90 dB common-mode rejection suppresses equal noise picked up by both cable conductors. The dual package supports stereo input channels in one device. Connect the positive and negative conductors to separate receiver inputs, keep the paired traces together, and verify the source amplitude against the input and output limits. The 14 V/µs slew rate supports rapid signal transitions, but the receiving stage must still provide the required load and bandwidth.
おすすめ
Stereo Mixer Line Stage
The INA2137PAG4 provides two matched receiver channels for a stereo mixer line stage, reducing the number of receiver packages while maintaining the family’s fixed ±6 dB gain options. Its 90 dB common-mode rejection helps prevent ground-potential differences and induced common-mode noise from reaching downstream volume-control and routing circuitry. The dual channel arrangement also simplifies balanced left and right signal paths. Confirm the allowable input range and output swing for the intended supply voltage, and place the device where short analog traces can connect directly to the input connectors.
おすすめ
Audio Interface Signal Conditioning
In a balanced audio interface, the INA2137PAG4 converts two differential input signals into conditioned single-ended outputs suitable for downstream conversion or mixing. The selectable ±6 dB gain accommodates standard line-level signals without requiring a complex external gain network, while the 2.9 mA maximum quiescent current keeps standing power demand modest. The fast 0.01% settling characteristic is valuable when channels are switched or sampled. Engineers should still check frequency response, output impedance, and load compatibility against the specific interface architecture.
おすすめ
Multichannel Surround Audio
The dual INA2137PAG4 is well suited to multichannel surround systems where several balanced line-level sources must undergo consistent differential reception. Each device handles two channels with the same selectable 1/2 or 2 gain, while 90 dB common-mode rejection reduces susceptibility to shared interference between paired conductors. This can improve channel-to-channel consistency in home-theater, studio-monitoring, and installed-audio equipment. Maintain equal trace geometry and matched grounding across channels, and verify that the downstream routing circuit does not demand more output swing than the selected supply rails can provide.
おすすめ
Broadcast and Studio Monitoring
The INA2137PAG4 can serve as the balanced receiver stage for broadcast or studio monitoring equipment. Its low-distortion operation at 1 kHz and high common-mode rejection are appropriate for preserving the integrity of line-level program audio, particularly when cables connect external equipment with different ground references. The dual architecture reduces component count for stereo monitoring. Use careful input routing, stable supply bypassing, and a quiet ground reference, then verify the full signal chain for gain, headroom, bandwidth, and output loading before production use.
おすすめ
Industrial Audio Test Equipment
The INA2137PAG4 fits industrial audio test equipment that receives balanced signals through long or externally connected cable runs. Its 90 dB common-mode rejection helps suppress shared interference generated by nearby industrial systems, while the dual package allows two channels to be evaluated under consistent conditions. The selectable ±6 dB gain and 14 V/µs slew rate support practical line-level measurements. Designers should protect the input pins against transients, observe the absolute maximum ratings, and confirm the frequency response and settling behavior required by the test bandwidth.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: INA2137PAG4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | INA2137PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 14-pin PDIP | 14-pin PDIP |
| Device Type | Dual audio differential line receiver | Dual audio differential line receiver |
| Channel Count | 2 channels | 2 channels |
| Gain | 1/2 or 2 (±6 dB) | ±6 dB family rating |
主な差別化要因
- Dual receiver in a through-hole package (vs INA2137UAG4)
- Fixed family gain with two selectable ratios (vs INA2137PA)
- Strong common-mode rejection for balanced audio (vs INA2137PA)
設計ノート
Route each balanced input as a closely spaced differential pair and keep the pair away from switching regulators, digital clock lines, and relay contacts. Place the receiver near the connector or source so that unbalanced, high-impedance sections remain short. Ground the unused channel according to the manufacturer recommendations rather than allowing it to float, and use the package drawing as the authority for the 14-pin PDIP footprint.
Decouple each supply rail close to the device pins and verify the complete analog signal chain for voltage headroom. The INA2137PAG4 family rating of ±18 V describes the supported supply scale, but it does not mean every input or output can swing rail to rail. Check the recommended operating region, output-swing limit, and absolute maximum ratings before applying signals or selecting the external supply rails.
Do not treat the INA2137UAG4 as a drop-in replacement for the INA2137PAG4. Both are 14-pin devices, but the former uses a surface-mount SOIC footprint while the latter uses a through-hole PDIP footprint. Their physical lead arrangements are not interchangeable. Also confirm the exact temperature grade and ordering suffix when substituting INA2137PA, because family-level electrical ratings do not by themselves prove exact-ordering equivalence.
Evaluate the receiver with the actual source impedance, cable length, and downstream load rather than relying only on headline slew-rate and common-mode-rejection figures. The 14 V/µs slew rate supports fast signal movement, while 90 dB common-mode rejection suppresses equal noise on the two conductors. Add source termination only if recommended by the complete signal-chain design, and verify that output loading preserves the expected settling behavior.
コンプライアンス情報
The manufacturer product and datasheet links are available, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated in the available product information. The device is an audio receiver IC rather than an automotive-qualified component.