Texas Instruments

INA2137PAG4 - Dual ±6dB Audio Receiver | Texas Instruments

Артикул: INA2137PAG4 ✓ Активен
±18 V (36 V total) Vdss 2.9 mA Id 14-pin PDIP Package 1 kHz Speed
MOQ: 1 |

INA2137PAG4 Обзор

The Texas Instruments INA2137PAG4 is a dual audio differential line receiver with selectable gain of 1/2 or 2, corresponding to ±6 dB, a supply range of ±18 V or 36 V total, and a 14-pin PDIP package. It is designed for balanced audio signals that require accurate differential-to-single-ended conversion, high common-mode rejection, low distortion, and fast settling performance.

An audio differential line receiver is an analog amplifier that accepts two signal inputs and rejects voltage common to both inputs while amplifying the differential component. Within the signal-chain hierarchy, the INA2137 belongs to the receiver and amplifier class, where it sits between a balanced source, such as an audio converter or studio interface, and downstream single-ended audio circuitry. Its fixed ±6 dB gain makes it useful where standard-level balanced audio signals require predictable amplification.

Key characteristics include a 14 V/µs slew rate, 90 dB common-mode rejection, and maximum quiescent current of 2.9 mA. The device also provides fast settling to 0.01% and low distortion at 1 kHz. The available dual configuration gives two receiver channels in one package, reducing component count and helping maintain channel consistency in stereo, surround-sound, and professional audio systems.

The INA2137 family includes single and dual versions, with the selected INA2137PAG4 orderable configuration using a 14-pin PDIP package. Its broad ±18 V supply capability supports bipolar audio rails and higher headroom than conventional low-voltage line-level circuits. Designers should observe the absolute maximum supply ratings, maintain adequate input and output voltage ranges, and confirm output-swing limits against the selected supply configuration.

Typical uses include balanced professional-audio inputs, line-level differential signal conditioning, mixer input stages, multichannel audio equipment, and test instrumentation. The dual receiver is particularly appropriate when two balanced channels must be processed with matched amplification and common-mode rejection behavior. It can also precede an ADC, provided the engineer verifies input range, bandwidth, settling requirements, and system noise performance.

PCB implementation requires short input traces, a stable ground reference, and careful separation between the two receiver channels where low-level audio signals are present. Place bypass capacitors close to the supply pins and avoid routing input and output paths in parallel. Confirm the 14-pin numbering and pin functions in the manufacturer pin-description table before assigning tracks or external networks.

This product page consolidates the INA2137 family specifications, sourcing guidance, available package distinctions, and practical circuit considerations into one engineering reference. It is intended to support design reviews, prototype planning, signal-chain selection, and informed replacement decisions without obscuring the differences between package and temperature-ordering variants.

Аналоги без доработки для INA2137PAG4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с INA2137PAG4 (тот же форм-фактор и посадочное место) — отличается по Package.

Texas Instruments
Package: 14-pin PDIP (N)
Сравнить с INA2137PAG4 →

INA2137PA

✅ Прямая замена
Texas Instruments
📦 14-pin PDIP
Dual audio differential line receiver · 2 channels · 0.5 (-6 dB) · 2 (+6 dB) · 14-pin PDIP (N) · Through-hole · 9 V, 12 V, 15 V, 18 V, 24 V, or 28 V · Differential

Уточнить цену

Открыть даташит →

INA2137PAG4 Максимальные параметры и электрические характеристики

Device Type Dual audio differential line receiver
Channel Count 2 channels
Gain 1/2 or 2 (±6 dB)
Supply Voltage Range ±18 V (36 V total)
Slew Rate 14 V/µs
Common-Mode Rejection Ratio 90 dB
Maximum Quiescent Current 2.9 mA
Settling Accuracy 0.01%
Distortion Test Frequency 1 kHz
Корпус 14-pin PDIP
Тип монтажа Through-hole
Статус RoHS unknown
REACH Status unknown
Lead-Free Status unknown

Руководство по цоколевке INA2137PAG4 в корпусе 14-pin pdip

Цоколевка для INA2137PAG4 (корпус 14-pin pdip). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 14-pin pdip для INA2137PAG4

Нет подробных данных о распиновке для INA2137PAG4.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

INA2137PAG4 подходит для 6 применениеs: Balanced Professional Audio Input, Stereo Mixer Line Stage, Audio Interface Signal Conditioning, Multichannel Surround Audio, Broadcast and Studio Monitoring, Industrial Audio Test Equipment.

🎧

Balanced Professional Audio Input

The INA2137PAG4 fits a balanced professional-audio input because its selectable gain of 1/2 or 2 provides the required ±6 dB line-level amplification, while 90 dB common-mode rejection suppresses equal noise picked up by both cable conductors. The dual package supports stereo input channels in one device. Connect the positive and negative conductors to separate receiver inputs, keep the paired traces together, and verify the source amplitude against the input and output limits. The 14 V/µs slew rate supports rapid signal transitions, but the receiving stage must still provide the required load and bandwidth.

🎚️

Stereo Mixer Line Stage

The INA2137PAG4 provides two matched receiver channels for a stereo mixer line stage, reducing the number of receiver packages while maintaining the family’s fixed ±6 dB gain options. Its 90 dB common-mode rejection helps prevent ground-potential differences and induced common-mode noise from reaching downstream volume-control and routing circuitry. The dual channel arrangement also simplifies balanced left and right signal paths. Confirm the allowable input range and output swing for the intended supply voltage, and place the device where short analog traces can connect directly to the input connectors.

🎚️

Audio Interface Signal Conditioning

In a balanced audio interface, the INA2137PAG4 converts two differential input signals into conditioned single-ended outputs suitable for downstream conversion or mixing. The selectable ±6 dB gain accommodates standard line-level signals without requiring a complex external gain network, while the 2.9 mA maximum quiescent current keeps standing power demand modest. The fast 0.01% settling characteristic is valuable when channels are switched or sampled. Engineers should still check frequency response, output impedance, and load compatibility against the specific interface architecture.

📺

Multichannel Surround Audio

The dual INA2137PAG4 is well suited to multichannel surround systems where several balanced line-level sources must undergo consistent differential reception. Each device handles two channels with the same selectable 1/2 or 2 gain, while 90 dB common-mode rejection reduces susceptibility to shared interference between paired conductors. This can improve channel-to-channel consistency in home-theater, studio-monitoring, and installed-audio equipment. Maintain equal trace geometry and matched grounding across channels, and verify that the downstream routing circuit does not demand more output swing than the selected supply rails can provide.

🎙️

Broadcast and Studio Monitoring

The INA2137PAG4 can serve as the balanced receiver stage for broadcast or studio monitoring equipment. Its low-distortion operation at 1 kHz and high common-mode rejection are appropriate for preserving the integrity of line-level program audio, particularly when cables connect external equipment with different ground references. The dual architecture reduces component count for stereo monitoring. Use careful input routing, stable supply bypassing, and a quiet ground reference, then verify the full signal chain for gain, headroom, bandwidth, and output loading before production use.

🏭

Industrial Audio Test Equipment

The INA2137PAG4 fits industrial audio test equipment that receives balanced signals through long or externally connected cable runs. Its 90 dB common-mode rejection helps suppress shared interference generated by nearby industrial systems, while the dual package allows two channels to be evaluated under consistent conditions. The selectable ±6 dB gain and 14 V/µs slew rate support practical line-level measurements. Designers should protect the input pins against transients, observe the absolute maximum ratings, and confirm the frequency response and settling behavior required by the test bandwidth.

What are the key specifications of INA2137PAG4 that engineers should know?
The INA2137PAG4 is a dual audio differential line receiver with selectable gain of 1/2 or 2, equivalent to ±6 dB. According to the manufacturer datasheet, it supports supply voltages up to ±18 V, provides 90 dB common-mode rejection, has a 14 V/µs slew rate, and draws no more than 2.9 mA quiescent current. The device is packaged in a 14-pin PDIP format and is intended for balanced, line-level audio signal conditioning.
What is the operating voltage range of INA2137PAG4?
The INA2137PAG4 supports a total supply range extending to 36 V, with operation described as ±18 V in the manufacturer datasheet. This gives the receiver substantial voltage headroom for bipolar audio rails while preserving ±6 dB gain. The precise minimum supply and allowable input or output excursions must be checked in the electrical-characteristics table before the circuit is connected to any external source.
How does the INA2137PAG4 compare with INA2137PA?
The INA2137PA and INA2137PAG4 are both identified as 14-pin PDIP versions of the dual INA2137 receiver, but their ordering codes indicate different grade or packaging details. The manufacturer family data associates the PAG4 device with ±6 dB selectable gain and a wide ±18 V supply range. Verify the complete ordering table and temperature grade before treating either exact MPN as a substitute for the other.
When should I choose INA2137PAG4 over a single-channel receiver?
Choose the INA2137PAG4 when two balanced audio channels must be received in one package. Its dual architecture reduces the number of receiver packages and keeps the two channels on the same device, which can simplify routing and promote consistent signal handling. A single-channel receiver is preferable when the design uses only one stereo leg, requires a smaller PCB footprint, or operates with a different supply arrangement.
Is INA2137PAG4 suitable for balanced audio mixer inputs?
The INA2137PAG4 is suitable for balanced line-level mixer inputs because it combines selectable ±6 dB gain with 90 dB common-mode rejection and a 14 V/µs slew rate. The dual channels suit stereo or multichannel input stages. Designers should still verify signal amplitude, input biasing requirements, output-headroom margin, and the input/output voltage restrictions in the manufacturer electrical-characteristics table.
Where can I download the INA2137PAG4 datasheet PDF?
The official INA2137PAG4 datasheet is available from Texas Instruments through the manufacturer datasheet link on this page. The document is titled “Audio Differential Line Receivers, ±6dB (G=1/2 or 2)” and covers the family’s features, electrical characteristics, pin descriptions, and application information. Use the manufacturer’s ordering table to distinguish the exact PAG4 configuration from other package variants.
Where can I find the INA2137PAG4 pinout?
The INA2137PAG4 pin assignments are shown in the pin-configuration and pin-description sections of the Texas Instruments INA2137 family datasheet. The exact PAG4 configuration uses a 14-pin PDIP package. Assign PCB connections from that table rather than inferring dual-receiver pinouts from a SOIC version, because the physical package and lead arrangement differ.
What can replace INA2137PAG4?
INA2137PA is the closest same-package candidate identified for the INA2137PAG4 because both are associated with the 14-pin PDIP dual-receiver configuration. It should be treated as a conditional replacement rather than an unconditional equivalent: confirm the exact ordering suffix, temperature grade, lead arrangement, gain configuration, and lifecycle status against the manufacturer datasheet. The INA2137UAG4 is not a direct drop-in choice because it uses a 14-pin SOIC package.
Is INA2137PAG4 the same as INA2137UAG4?
No. The INA2137PAG4 and INA2137UAG4 use different physical packages: the PAG4 configuration is a 14-pin PDIP device, while the UAG4 configuration is a 14-pin SOIC. Although both belong to the dual INA2137 family and share the family’s ±6 dB gain concept, their lead arrangements differ. Moving between them requires a PCB redesign rather than a board-level drop-in replacement.
Why does common-mode rejection matter in a balanced audio receiver?
Common-mode rejection matters because balanced audio cables can pick up equal unwanted voltages on both signal conductors during installation. The INA2137PAG4 provides 90 dB common-mode rejection, allowing the receiver to suppress that shared noise while retaining the differential audio signal. This is especially useful in studio, stage, industrial, and long-cable systems where grounding differences and electromagnetic coupling can degrade signal integrity.
How much current does INA2137PAG4 consume?
The INA2137PAG4 has a maximum quiescent current of 2.9 mA according to the manufacturer datasheet. Quiescent current represents the device’s standing supply demand before external signal load is considered. Actual system consumption can also include output current and the requirements of nearby bypass components, so thermal and power-budget calculations should include the complete analog signal chain.
Can INA2137PAG4 drive a single-ended audio input?
The INA2137PAG4 is designed to convert balanced differential audio into a single-ended receiver output, making it appropriate for downstream single-ended circuitry. Output swing, bandwidth, and stability must be checked against the connected load and the selected supply voltage. If the next stage requires differential signaling, use a balanced output architecture rather than treating one receiver channel as a full differential output.
Where can I request a quote for INA2137PAG4?
Use the Request a Quote form on this page to request current pricing, availability, lead time, and order quantities for INA2137PAG4. Quote-based purchasing is appropriate because legacy PDIP inventory and exact-grade availability can vary by region and order size. Provide the complete INA2137PAG4 MPN, required quantity, and delivery destination so the request is matched to the exact ordering configuration.
Is INA2137PAG4 in stock?
Current INA2137PAG4 inventory is confirmed through the Request a Quote form on this page. Because this is an older through-hole ordering configuration, quantity availability may vary by lot and market. Submit the exact MPN, required quantity, and target delivery schedule to receive a current supply response rather than relying on an outdated stock indication.
How should INA2137PAG4 be laid out on a PCB?
Place the INA2137PAG4 close to the source and destination of each balanced audio channel, and keep the two input conductors together and away from switching nodes and digital clocks. Connect decoupling capacitors close to the device supply pins and use a low-impedance ground plane. The 14-pin PDIP footprint should follow the manufacturer package drawing, while the pin names should be taken from the datasheet pin-description table.

Справочные инженерные данные для INA2137PAG4 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the INA2137PAG4 when the design needs a dual, fixed ±6 dB balanced-audio receiver in a 14-pin PDIP package, particularly for professional-audio, studio, mixer, or multichannel line-level inputs. Its 90 dB common-mode rejection and 14 V/µs slew rate make it suitable for rejecting shared cable noise while handling fast signal transitions. INA2137PA is the closest identified same-package alternative, but its exact ordering suffix and grade should be checked before substitution. Do not choose the INA2137UAG4 for a direct board replacement because its 14-pin SOIC package requires a different footprint. For a single channel, a smaller surface-mount receiver may be preferable, but it is not a physical drop-in replacement. Before finalizing any choice, confirm supply voltage, input and output swing, operating temperature, bandwidth, output loading, and lifecycle status from the manufacturer ordering and electrical-characteristics tables.

Сравнение с аналогами

Параметр Этот товар INA2137PA
Brand Texas Instruments Texas Instruments
Package 14-pin PDIP 14-pin PDIP
Device Type Dual audio differential line receiver Dual audio differential line receiver
Channel Count 2 channels 2 channels
Gain 1/2 or 2 (±6 dB) ±6 dB family rating

Ключевые отличия

  • Dual receiver in a through-hole package (против INA2137UAG4)
  • Fixed family gain with two selectable ratios (против INA2137PA)
  • Strong common-mode rejection for balanced audio (против INA2137PA)

Заметки по проектированию

Route each balanced input as a closely spaced differential pair and keep the pair away from switching regulators, digital clock lines, and relay contacts. Place the receiver near the connector or source so that unbalanced, high-impedance sections remain short. Ground the unused channel according to the manufacturer recommendations rather than allowing it to float, and use the package drawing as the authority for the 14-pin PDIP footprint.

Decouple each supply rail close to the device pins and verify the complete analog signal chain for voltage headroom. The INA2137PAG4 family rating of ±18 V describes the supported supply scale, but it does not mean every input or output can swing rail to rail. Check the recommended operating region, output-swing limit, and absolute maximum ratings before applying signals or selecting the external supply rails.

Do not treat the INA2137UAG4 as a drop-in replacement for the INA2137PAG4. Both are 14-pin devices, but the former uses a surface-mount SOIC footprint while the latter uses a through-hole PDIP footprint. Their physical lead arrangements are not interchangeable. Also confirm the exact temperature grade and ordering suffix when substituting INA2137PA, because family-level electrical ratings do not by themselves prove exact-ordering equivalence.

Evaluate the receiver with the actual source impedance, cable length, and downstream load rather than relying only on headline slew-rate and common-mode-rejection figures. The 14 V/µs slew rate supports fast signal movement, while 90 dB common-mode rejection suppresses equal noise on the two conductors. Add source termination only if recommended by the complete signal-chain design, and verify that output loading preserves the expected settling behavior.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product and datasheet links are available, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated in the available product information. The device is an audio receiver IC rather than an automotive-qualified component.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

INA2137PAG4 datasheet INA2137PAG4 pinout INA2137PAG4 datasheet pdf INA2137PAG4 equivalent INA2137PAG4 replacement INA2137PAG4 cross reference INA2137PAG4 vs INA2137PA INA2137PAG4 vs INA2137UAG4 Texas Instruments INA2137PAG4 INA2137PAG4 price INA2137PAG4 stock INA2137 14-pin PDIP receiver INA2137 balanced audio input INA2137 ±18V line receiver what replaces INA2137PAG4

Связанные компоненты & термины

Texas Instruments INA2137PAG4 INA2137PA INA2137UAG4 INA2137 audio differential line receiver differential receiver line receiver analog amplifier amplifier IC semiconductor common-mode rejection ratio CMRR slew rate quiescent current balanced audio single-ended audio audio mixer professional audio studio equipment 14-pin PDIP PDIP package through-hole package analog signal conditioning
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ