Renesas Electronics

ISL8483IPZ - 5V RS-485/RS-422 Transceiver | Renesas

部品番号: ISL8483IPZ ✗ 生産終了
5 V Vdss RS-422 and RS-485 Rds(on) 8-pin PDIP Package
MOQ: 1 |

ISL8483IPZ 概要

The Renesas Electronics ISL8483IPZ is a 5 V, single-transmitter and single-receiver RS-485/RS-422 interface transceiver packaged in an 8-pin PDIP. It combines a balanced differential driver and receiver in one package, supports communication over 0 to 70 °C, and uses slew-rate-limited drive to reduce electromagnetic interference and transmission-line reflections. The device is RoHS compliant and includes ESD-protected communications pins.

An RS-485/RS-422 transceiver is an interface IC that converts between single-ended logic signals and balanced differential signals. This signal format rejects common-mode noise and supports reliable communication over longer cables or across systems with different ground potentials. Within the broader semiconductor hierarchy, the ISL8483IPZ is a line-driver and line-receiver device, an interface IC, and a communications peripheral used between digital controllers and balanced-wired networks.

Key features include operation from a single 5 V supply, one driver and one receiver, support for both RS-485 and RS-422 applications, and slew-rate-limited outputs. Slew-rate limiting is particularly valuable in multidrop and multipoint networks because it lowers the high-frequency content of the driver edge. This helps control EMI and reduces reflections caused by unterminated transmission lines or stubs. The package also provides a straightforward through-hole footprint for legacy and industrial equipment.

The transceiver architecture supports point-to-point RS-422 links as well as multidrop RS-485 networks. The receiver provides the balanced input path, while the driver converts outgoing logic levels into differential line signals. Biasing, termination, common-mode range, driver loading, and maximum cable length remain system-level design considerations. Because those operating limits are not stated in the available product information, consult the manufacturer datasheet before finalizing network geometry or cable assumptions.

Typical uses include industrial instrumentation, factory automation equipment, building controls, industrial sensor gateways, remote monitoring links, and embedded serial buses. The same transceiver can be used in designs where interoperability between RS-422 and RS-485 equipment matters, provided the system configuration and termination strategy match the selected standard. Its through-hole package also makes it useful for repairs and expansions of boards designed around DIP-style interface devices.

When laying out the circuit, keep the balanced traces short, route the driver and receiver differential pair together, and avoid placing unrelated switching nodes between the two conductors. Apply termination only where it belongs in the network topology, normally at the physical ends of the cable. Confirm logic polarity, receiver enable behavior, grounding strategy, and bus loading against the manufacturer application guidance before applying power.

This product page combines the exact package and interface classification with application guidance, engineering design notes, and a compatibility-focused comparison. These practical details help engineers evaluate the ISL8483IPZ for industrial communications while separating confirmed device characteristics from parameters that must be confirmed in the manufacturer datasheet.

ドロップイン代替品: ISL8483IPZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ISL8483IPZ (同一形状・フットプリント) — 相違点: Mounting Type, Operating Temperature Range, Package, Product Type, Receiver Count.

Renesas Electronics
Mounting Type: Through hole
Operating Temperature Range: -40°C to +85°C
Package: 8-PDIP, 0.300 in (7.62 mm) width
比較対象 ISL8483IPZ →

ISL8483CPZ

✅ ドロップイン
Renesas Electronics
📦 8-pin PDIP
RS-485/RS-422 transceiver · 5 V · 1 · 1 · RS-485 and RS-422 · -40°C to +85°C · 8-PDIP, 0.300 in (7.62 mm) width · Through hole

価格はお問い合わせください

データシートを見る →

ISL8483EIPZ

✅ ドロップイン
📦 8-pin PDIP
Both use a 5 V RS-485/RS-422 interface and an 8-pin PDIP footprint with a 0 V supply difference; the E variant has explicitly documented ±15 kV ESD protection.

📋 参考代替品(カタログ未掲載)

ISL8483IPZ 仕様

Product Type RS-485/RS-422 single transceiver
Transmitter Count 1 transmitter
Receiver Count 1 receiver
電源電圧 5 V
Interface Standards RS-422 and RS-485
Technology BiCMOS
動作温度範囲 0 °C to 70 °C
パッケージ 8-pin PDIP
パッケージ / ケース MS-001BA
ピン数 8 pins
実装タイプ Through-hole
Packaging Type Tube
Driver Edge Control Slew-rate limited
ESD Protection ESD protected
RoHS ステータス Compliant

ISL8483IPZ ms-001ba ピン配置ガイド

ISL8483IPZ (ms-001ba パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ISL8483IPZ の ms-001ba パッケージピン配置図

詳細なピン配置データはありません: ISL8483IPZ.

詳細は データシート をご参照ください。

主な用途

ISL8483IPZ の用途: 6 件s: Industrial Sensor Gateway, Factory Automation Controller, Building Control Network, Remote Monitoring Link, Process Instrumentation Interface, Legacy Communications Board Repair.

🏭

Industrial Sensor Gateway

The ISL8483IPZ suits an industrial sensor gateway that must collect readings from a remote RS-485 bus and forward them to a local controller. Its single transmitter and single receiver provide one balanced communications direction, while the 5 V supply matches common embedded control platforms. The slew-rate-limited driver reduces electromagnetic interference and line reflections in multidrop installations. Use the receiver and driver terminals for the isolated field-bus pair, observe the specified 0 °C to 70 °C range, and verify the bus's node count, termination, and grounding against the manufacturer guidance.

🏭

Factory Automation Controller

The ISL8483IPZ can provide the balanced physical layer between a factory controller and remote actuators, motor-control electronics, or operator panels. Its 5 V operation and one-driver, one-receiver arrangement align with conventional embedded control systems, while slew-rate limiting helps contain high-frequency emissions on factory wiring. The 8-pin PDIP footprint is useful when maintaining an established through-hole control board. During layout, route the two conductors as a pair, apply the appropriate endpoint termination, and confirm that grounding and common-mode conditions remain compatible with the connected equipment.

🧩

Building Control Network

The ISL8483IPZ is applicable to building-control nodes that exchange commands and status over a balanced RS-485 wiring network. A single transceiver supports one communication link per device, and the controlled output slew rate helps reduce EMI where cables run near lighting, access-control, and HVAC equipment. Its 5 V supply is suitable for low-voltage control electronics, while the through-hole package simplifies compatibility with legacy building-control boards. Validate the complete network topology, termination locations, logic polarity, and operating temperature before field deployment.

🌐

Remote Monitoring Link

The ISL8483IPZ can connect a remote environmental or equipment-monitoring unit to a central collector over an RS-422 or RS-485 link. Balanced signaling improves noise immunity on cables that may run near motors, switching equipment, or other industrial sources. The device's one transmitter and one receiver are sufficient for a full-duplex RS-422 point-to-point connection or one multidrop RS-485 node. Designers should use twisted pair, maintain a controlled reference ground, and verify cable length and loading against the complete interface specifications before installation.

🔧

Process Instrumentation Interface

The ISL8483IPZ is appropriate for process-instrumentation equipment that must exchange measurements with a host controller over a balanced line. Its differential driver and receiver provide the physical interface, while slew-rate-limited transitions reduce the likelihood of excessive EMI or reflections in installed cabling. The 5 V supply supports integration with low-voltage instrumentation electronics, and the PDIP package can assist maintenance of older measurement platforms. Confirm receiver thresholds, common-mode behavior, bus loading, and isolation requirements before connecting field sensors or powered transmitters.

🔧

Legacy Communications Board Repair

The ISL8483IPZ is well suited to repairing or extending an established board that uses an 8-pin PDIP RS-485/RS-422 transceiver. Its through-hole mounting preserves the original mechanical footprint and avoids the need to redesign the board around a smaller surface-mount package. The 5 V interface supports many legacy embedded systems, and the one-transceiver arrangement covers a conventional point-to-point or network-node role. Before installation, compare every numbered pin with the original device and verify that replacement part temperature, ESD requirements, and control functions satisfy the original design intent.

おすすめ製品の概要

ISL8483CPZ Renesas Electronics 使用用途: Industrial Sensor Gateway, Factory Automation Controller, Building Control Network, Remote Monitoring Link, Process Instrumentation Interface, Legacy Communications Board Repair ISL8483EIPZ Same-package ESD-protected transceiver family option 使用用途: Industrial Sensor Gateway, Factory Automation Controller, Building Control Network, Remote Monitoring Link, Process Instrumentation Interface, Legacy Communications Board Repair
What is the ISL8483IPZ?
The ISL8483IPZ is a 5 V RS-485/RS-422 interface transceiver containing one differential transmitter and one differential receiver. According to the Intersil manufacturer datasheet, it is a low-power BiCMOS device with slew-rate-limited outputs, ESD-protected driver and receiver pins, and an 8-pin PDIP package. It is intended for balanced serial communication in industrial and legacy through-hole equipment.
Where can I download the ISL8483IPZ datasheet PDF?
The ISL8483IPZ manufacturer datasheet can be downloaded from the Datasheets.com PDF link listed on this page. The document describes the 5 V low-power RS-485/RS-422 transceiver and states that the ISL8483 family uses slew-rate-limited drivers to reduce EMI and minimize reflections from improperly terminated lines or unterminated stubs. Use the document's pin-description table when assigning connections.
Where can I find the ISL8483IPZ pinout?
The ISL8483IPZ uses an 8-pin PDIP package with through-hole mounting. Use the pin-description table in the Intersil manufacturer datasheet to identify the supply, ground, driver, receiver, enable, and logic-control terminals. The product information confirms the 8-pin PDIP configuration but does not provide a numbered terminal list, so consult the datasheet before assigning PCB tracks or probing the device.
What are the key specifications of ISL8483IPZ that engineers should know?
The ISL8483IPZ combines one transmitter, one receiver, a 5 V supply, RS-422 and RS-485 support, and an 8-pin PDIP package. According to the Intersil manufacturer datasheet, the BiCMOS device uses slew-rate-limited drivers to reduce electromagnetic interference and transmission-line reflections. Its specified commercial operating range is 0 °C to 70 °C, and the communications pins are ESD protected.
Is ISL8483IPZ suitable for industrial RS-485 communication?
The ISL8483IPZ is suitable for industrial RS-485 links when the enclosure temperature stays within its specified 0 °C to 70 °C range. Its 5 V RS-485/RS-422 architecture, ESD-protected communications pins, and slew-rate-limited driver support balanced wired communications in factory equipment, sensor interfaces, and building controls. Confirm maximum data rate, bus loading, and common-mode limits in the manufacturer datasheet.
What is the difference between RS-485 and RS-422 in ISL8483IPZ?
Both RS-485 and RS-422 use balanced differential signaling, but their network rules differ. According to the Intersil manufacturer datasheet, the ISL8483IPZ supports both standards, allowing a single transceiver type to serve point-to-point RS-422 links and multidrop RS-485 networks. RS-422 generally supports one driver with multiple receivers, while RS-485 permits multiple drivers and requires careful biasing and contention control.
What is the operating voltage of ISL8483IPZ?
The ISL8483IPZ operates from a nominal 5 V supply. According to the Intersil manufacturer datasheet, it is a 5 V BiCMOS RS-485/RS-422 transceiver. The confirmed product information does not state the minimum and maximum supply limits, so use the datasheet's absolute-maximum and recommended-operating-condition sections for regulator tolerance, bypassing, and power-state analysis.
What is the operating temperature range of ISL8483IPZ?
The ISL8483IPZ is specified for 0 °C to 70 °C. This range identifies the commercial-temperature grade of the device and distinguishes it from options intended for extended industrial-temperature operation. If the enclosure can exceed 70 °C, select a part with a higher rated temperature range or use thermal-control measures; do not infer extended-temperature operation from the ESD rating.
Does ISL8483IPZ reduce EMI on RS-485 networks?
Yes, the ISL8483IPZ uses slew-rate-limited drivers specifically to reduce electromagnetic interference. According to the Intersil manufacturer datasheet, the controlled transitions also minimize reflections from improperly terminated transmission lines or unterminated stubs in multidrop and multipoint applications. The benefit depends on correct network design, including suitable topology, cable routing, and termination.
Where to buy ISL8483IPZ online?
Use the Request a Quote form on this page to request availability, sourcing support, and a quotation for the exact ISL8483IPZ. The component is an 8-pin PDIP RS-485/RS-422 transceiver from Renesas Electronics, originally introduced by Intersil. Specify the package, operating-temperature grade, tube packaging, and required quantity when submitting the request.
What is the price of ISL8483IPZ?
The current commercial terms for ISL8483IPZ are available through the Request a Quote form on this page. The quote request should identify the exact MPN, the 8-pin PDIP package, and the required quantity. For an obsolete or legacy device, also state whether the design must retain the original package and whether traceability or lot-specific documentation is required.
What is the lead time and stock status of ISL8483IPZ?
Current stock and lead-time confirmation for ISL8483IPZ should be requested through the Request a Quote form on this page. The exact MPN is an 8-pin PDIP RS-485/RS-422 transceiver, so replacement decisions should preserve the package, pin arrangement, interface standard, and supply requirements. A quotation response can establish available inventory and the current procurement lead time.
What can replace ISL8483IPZ?
The closest documented family candidates are the ISL8483CPZ and ISL8483EIPZ, both 8-pin PDIP RS-485/RS-422 transceivers. The ISL8483CPZ differs in device-specific control functionality while retaining the same 5 V interface class, while the ISL8483EIPZ is an ESD-protected family variant. Confirm pin function, operating range, and timing from each manufacturer datasheet before production substitution.
IS ISL8483CPZ the same as ISL8483IPZ?
The ISL8483CPZ is a close same-package RS-485/RS-422 transceiver candidate, but it should not be treated as identical without a pin-by-pin review. Both operate in the 5 V class and use an 8-pin PDIP format. The ISL8483CPZ includes different device-specific control functionality, so compare enable or shutdown behavior, operating-temperature limits, and receiver and driver specifications before substitution.
ISL8483IPZ vs ISL8483EIPZ - which is better for industrial use?
The ISL8483EIPZ is generally the stronger candidate when the application specifically calls for an explicitly documented ESD-protected variant, while the ISL8483IPZ has a confirmed 0 °C to 70 °C commercial range. Both are 5 V, single-transceiver RS-485/RS-422 devices in an 8-pin PDIP format. The final choice should follow the required temperature grade, exact pin functions, and production qualifications rather than package alone.
When should I choose ISL8483IPZ instead of a surface-mount transceiver?
Choose ISL8483IPZ when the PCB must accept an 8-pin PDIP and the original through-hole interface design cannot be respun. The same 5 V RS-485/RS-422 function can be implemented in smaller surface-mount packages, but those alternatives require different land patterns and may have different control-pin assignments or temperature grades. ISL8483IPZ is most appropriate when footprint continuity is more important than board-area reduction.
Can ISL8483IPZ replace ISL8483IB or ISL8483IBZ?
No, the ISL8483IPZ should not directly replace the ISL8483IB or ISL8483IBZ on an existing PCB because those parts use surface-mount packages while ISL8483IPZ uses an 8-pin PDIP. The comparison identifies the mounting and package difference explicitly. A board redesign or adapter would be required, and the electrical and control-pin requirements would also need independent review.

エンジニアリング参考データ: ISL8483IPZ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ISL8483IPZ when an existing design requires an 8-pin PDIP RS-485/RS-422 transceiver, a 5 V supply, and the confirmed 0 °C to 70 °C commercial operating range. Choose the ISL8483CPZ when its device-specific control functions satisfy the circuit and a same-package family substitution is acceptable. Choose the ISL8483EIPZ when the design specifically requires the documented ±15 kV ESD rating and its pin functions and temperature grade are confirmed compatible. The ISL8483IB and ISL8483IBZ are not direct footprint substitutes because they use surface-mount packages. For any candidate, verify numbered pin functions, receiver enable behavior, common-mode range, data rate, bus loading, and termination requirements before releasing a production substitution.

代替品との比較

パラメータ この製品 ISL8483CPZ ISL8483EIPZ
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Product Type Single RS-485/RS-422 transceiver Single RS-485/RS-422 transceiver Single RS-485/RS-422 transceiver
Supply Voltage 5 V 5 V 5 V
Transmitter Count 1 1 1
Receiver Count 1 1 1
Interface Standards RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485

主な差別化要因

  • Preserves the 8-pin PDIP footprint (vs ISL8483IBZ)
  • Explicitly documented ESD-protected family option (vs ISL8483IPZ)
  • Slew-rate-limited operation for balanced industrial links (vs ISL8483CPZ)

設計ノート

Route the driver and receiver conductors as a tight differential pair on the PCB. Keep the pair away from switching nodes, relay coils, clock edges, and other high-energy traces. Use a continuous ground reference beneath the interface area where the system grounding strategy permits, and match the physical cable pair to the balanced line. Proper pair routing reduces radiated emissions and improves noise immunity.

Do not apply termination indiscriminately to every node in a multidrop network. RS-485 commonly uses termination at the two physical ends, while RS-422 point-to-point links require a different termination strategy. Also verify receiver enable polarity and bus-driver enable behavior against the manufacturer pin table before connecting two nodes that can drive the same pair simultaneously.

The slew-rate-limited driver is intended to reduce EMI and reflections, but it cannot compensate for poor cabling or topology. Use twisted-pair wiring, avoid long unterminated stubs, and keep branch lengths short. If the installation uses highly inductive loads or long cables, check grounding, common-mode range, protection devices, and data-rate limits in the complete interface design.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

RoHS compliance is stated in the product information. REACH, halogen-free status, lead-free status, and conflict-minerals status are unknown.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ISL8483IPZ datasheet ISL8483IPZ datasheet pdf ISL8483IPZ pinout ISL8483IPZ equivalent ISL8483IPZ replacement ISL8483IPZ cross reference ISL8483IPZ RS-485 transceiver ISL8483IPZ RS-422 interface ISL8483IPZ 8-pin PDIP ISL8483IPZ application circuit Renesas ISL8483IPZ ISL8483IPZ price ISL8483IPZ stock ISL8483IPZ vs ISL8483EIPZ ISL8483IPZ industrial communication

関連部品&用語

Renesas Electronics Intersil ISL8483IPZ ISL8483CPZ ISL8483EIPZ ISL8483IB ISL8483IBZ RS-485 RS-422 interface transceiver differential line driver differential line receiver BiCMOS slew-rate-limited driver ESD protection electromagnetic interference transmission-line reflections 5 V power supply 8-pin PDIP through-hole mounting industrial automation building control network remote monitoring process instrumentation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示