Renesas Electronics

ISL8487EIB - 5V RS-485/RS-422 Transceiver | Renesas

部品番号: ISL8487EIB ✓ 生産中
5 V Vdss 145 µA maximum for the ISL8487E family Id RS-485 and RS-422 Rds(on) 8-pin SOIC Package
MOQ: 1 |

ISL8487EIB 概要

The Renesas Electronics ISL8487EIB is a 5 V, single RS-485/RS-422 transceiver with one driver and one receiver in an 8-pin SOIC package. It supports balanced data communications, provides ±15 kV ESD protection on driver outputs and receiver inputs, and offers a 1/8-unit-load receiver for demanding multidrop and multipoint networks. The family operates from a single 5 V supply and is designed for low-power industrial interfaces.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into differential, balanced bus signals and receives differential bus signals back into CMOS-compatible logic. The differential architecture improves common-mode noise rejection and supports communication over longer cables than single-ended interfaces. The ISL8487E belongs to the RS-485 transceiver hierarchy, within interface ICs and broader data-communication semiconductors.

Key characteristics include ±15 kV ESD protection, fractional 1/8-unit loading, 5 V operation, and a maximum quiescent current of 145 µA for the ISL8487E family. The fractional loading permits as many as 256 devices on a bus under ideal conditions, subject to the network configuration and system-level constraints. Both high-speed and slew-rate-limited versions appear in the ISL8487E family, so the exact drive and data-rate limits should be confirmed from the ISL8487E datasheet before selecting the required speed grade.

The BiCMOS implementation combines low power with balanced-line drive capability. The receiver can monitor bus activity independently of the driver, while the driver and receiver enables support controlled connection to a multidrop network. The ±15 kV protection is particularly useful in industrial environments where cables may connect to external equipment and exposed connectors.

Typical applications include industrial process automation, remote meter reading, building controls, factory equipment links, multidrop instrumentation buses, and point-to-point RS-422 links. The low 1/8-unit load is valuable when many nodes share one bus, while the small SOIC-8 package simplifies PCB routing in compact control equipment.

When laying out the circuit, route the differential A and B traces as a closely coupled pair, provide the transceiver-side decoupling recommended by the manufacturer datasheet, and use chassis-ground protection methods at exposed connectors. Termination remains a network-level decision: terminate the far ends of the bus rather than every node, and confirm whether the selected family member uses slew-rate-limited or high-speed drive.

This page combines the manufacturer family specifications, package and interface details, comparison guidance, and practical PCB considerations to accelerate transceiver selection for balanced industrial communication links.

ドロップイン代替品: ISL8487EIB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

MAX1483ESA+T

✅ ドロップイン
📦 8-pin SOIC
Both use an 8-pin SOIC and support 1/8-unit-load, 5 V RS-485; MAX1483ESA+T is specified at approximately 20 µA operating current versus the ISL8487E family maximum of 145 µA quiescent current.

📋 参考代替品(カタログ未掲載)

ISL8487EIB 仕様

Product Type Single RS-485/RS-422 transceiver
Number of Transceivers 1 transceiver
電源電圧 5 V
Driver and Receiver Count 1 driver and 1 receiver
Interface Standards RS-485 and RS-422
ESD Protection ±15 kV on each driver output and receiver input
Receiver Unit Load 1/8 unit load
Maximum Bus Devices Up to 256 devices under ideal fractional-load conditions
静止電流 145 µA maximum for the ISL8487E family
Technology BiCMOS
データレート Up to 250 kbps for slew-rate-limited family members
パッケージ 8-pin SOIC
実装タイプ Surface mount
Product Variant ISL8487EIB industrial-temperature designation
RoHS ステータス Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable
Lead-Free Status Unknown

ISL8487EIB 8-pin soic ピン配置ガイド

ISL8487EIB (8-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ISL8487EIB の 8-pin soic パッケージピン配置図

詳細なピン配置データはありません: ISL8487EIB.

詳細は データシート をご参照ください。

主な用途

ISL8487EIB の用途: 6 件s: Industrial Process Automation, Remote Meter Reading, Building Automation Networks, Factory Equipment Communication, RS-422 Point-to-Point Link, Multipoint Instrumentation Bus.

🏭

Industrial Process Automation

The ISL8487EIB fits controller-to-instrument links in process automation because it combines a 5 V supply, differential RS-485/RS-422 operation, and ±15 kV ESD protection on the external bus pins. The 1/8-unit receiver load allows a dense network of up to 256 devices under ideal fractional-load conditions. Place the transceiver between the logic controller and the A/B bus, enable the driver only while transmitting, and use coupled differential routing to preserve noise immunity. Its low quiescent current, up to 145 µA for the family, also benefits compact remote I/O modules.

🧩

Remote Meter Reading

The ISL8487EIB is appropriate for remote meter-reading concentrators that collect measurements from many low-power field devices over a multidrop bus. Its 1/8-unit receiver load minimizes loading of the shared line, while the 5 V operation simplifies interface design in battery- and solar-powered instruments. The transceiver converts the metering controller’s logic signal into a differential bus waveform and returns bus data to the controller. Place ESD protection near external connectors and route the A and B traces together to retain common-mode rejection over the cable run.

🏠

Building Automation Networks

The ISL8487EIB supports balanced communication links used by building automation controllers, sensors, and access equipment. Its RS-485/RS-422 capability provides noise-resistant signaling, while the 1/8-unit receiver load helps accommodate multiple nodes on a shared cable. The ±15 kV ESD protection on driver outputs and receiver inputs adds defense when the bus connects to equipment or building wiring outside the enclosure. Firmware must manage driver-enable timing to prevent multiple transmitters from driving the bus simultaneously, and cable termination should be installed only where the network design requires it.

⚙️

Factory Equipment Communication

The ISL8487EIB is suitable for factory equipment links where motors, contactors, and long cables can introduce electrical transients and common-mode noise. The differential A/B interface rejects much of this interference, and ±15 kV ESD protection improves robustness at cable-facing pins. Use the transceiver in a remote I/O board to isolate a central controller from equipment located across the production floor. Keep the differential pair tightly coupled, avoid routing it alongside high-current switching paths, and provide local supply bypassing according to the manufacturer application circuit.

🌐

RS-422 Point-to-Point Link

The ISL8487EIB can be used for point-to-point RS-422 communication between two pieces of equipment when the system requires balanced signaling and protection at the line interface. A single transceiver provides one driver and one receiver, allowing full-duplex point-to-point links when paired with another transceiver at the remote endpoint. Its 5 V supply and 1/8-unit receiver load make it practical for compact interface cards. Verify the exact family member’s maximum data rate, propagation delay, and output-load capability against the required cable length before production release.

📡

Multipoint Instrumentation Bus

The ISL8487EIB fits multipoint instrumentation networks because its fractional 1/8-unit receiver load supports as many as 256 devices under ideal bus conditions. This loading capability is valuable when laboratory, utility, or industrial monitoring systems distribute multiple sensors and measurement modules along one cable. The transceiver’s balanced I/O improves noise immunity, while ±15 kV ESD protection strengthens the interface against external cable-borne events. Use disciplined driver-enable control so only one node transmits at a time, and apply termination at the physical endpoints of the bus rather than at every instrument.

おすすめ製品の概要

ISL8487EIB Renesas Electronics 使用用途: Industrial Process Automation, Remote Meter Reading, Building Automation Networks, Factory Equipment Communication, RS-422 Point-to-Point Link, Multipoint Instrumentation Bus MAX1483ESA+T Low-power RS-485 transceiver candidate 使用用途: Industrial Process Automation, Remote Meter Reading, Building Automation Networks, Factory Equipment Communication, RS-422 Point-to-Point Link, Multipoint Instrumentation Bus
What is the ISL8487EIB used for?
The ISL8487EIB is a 5 V RS-485/RS-422 transceiver used to connect a controller or terminal to a balanced communication bus. According to the Renesas ISL8487E family datasheet, the device combines one driver and one receiver, supports both RS-485 and RS-422 operation, and provides ±15 kV ESD protection on the driver outputs and receiver inputs. It is appropriate for industrial links, remote metering, process automation, and other systems that benefit from differential signaling.
Is the ISL8487EIB still active?
The Renesas ISL8487EIB is listed as an available RS-485/RS-422 transceiver in the current product records. The manufacturer continues to document the ISL8487E family, including the ISL8487E, ISL81487L, and ISL81487E devices. For a new production design, use the Renesas family datasheet to confirm ordering information, operating-temperature limits, and any package-specific notices before releasing the BOM.
What is the difference between RS-485 and RS-422 on the ISL8487EIB?
The ISL8487EIB can support both RS-485 and RS-422 because both standards use differential signaling, but their network arrangements differ. RS-485 generally supports a multidrop bus with multiple drivers allowed under controlled conditions, while RS-422 is commonly used for point-to-point or one-driver links. The Renesas ISL8487E family datasheet identifies the IC as an RS-485/RS-422 single transceiver; enable and termination strategy must be selected for the intended topology.
What are the key specifications of ISL8487EIB that engineers should know?
The ISL8487EIB is a 5 V, single-driver, single-receiver RS-485/RS-422 transceiver in an 8-pin SOIC package. The Renesas ISL8487E family datasheet specifies ±15 kV ESD protection, a 1/8-unit receiver load, BiCMOS operation, and a maximum family quiescent current of 145 µA. The 1/8-unit load supports dense networks of up to 256 devices under ideal conditions, while the low-power operation suits battery-operated remote instruments.
Where can I download the ISL8487EIB datasheet PDF?
Download the manufacturer datasheet from the Renesas document page titled “ISL8487E, ISL81487L, ISL81487E Datasheet.” It covers the ISL8487E family, including electrical characteristics, RS-485 and RS-422 applications, ESD ratings, driver and receiver behavior, and recommended circuits. Use the family document together with the exact ISL8487EIB ordering code when confirming package, temperature, and drive-rate requirements.
Where can I find the ISL8487EIB pinout?
The ISL8487EIB pinout is presented in the manufacturer’s ISL8487E family datasheet under the pin-description and package-outline material. The device uses an 8-pin SOIC package, with pins assigned to the receiver output, driver input, enables, supply, ground, and differential A/B bus connections. Use that pin-description table when assigning PCB nets and preserve the exposed-side layout and decoupling shown in the recommended application circuit.
Where can I buy ISL8487EIB online?
Use the “Request a Quote” form on this page to request the ISL8487EIB and confirm current availability, lead time, and order quantity. The form allows the purchasing request to be reviewed without relying on a static price table. Include the 8-pin SOIC package and industrial-temperature ordering suffix when submitting the request so the quotation matches the exact ISL8487EIB device.
What is the price of ISL8487EIB?
Submit a request through the “Request a Quote” form on this page for the current ISL8487EIB price. The form is the appropriate channel for an exact quote because commercial terms, available quantity, and lead time can change independently of the technical device specification. State the required quantity and packaging preference so the returned quotation can be evaluated directly against project requirements.
What is the lead time for ISL8487EIB?
Request the current ISL8487EIB lead time through the “Request a Quote” form on this page. Lead time depends on the requested quantity, package shipment format, and current manufacturer channel availability, so it should be confirmed for the exact order rather than inferred from a generic listing. Include the production quantity and required delivery date in the request.
Is ISL8487EIB in stock?
Current ISL8487EIB stock status should be confirmed through the “Request a Quote” form on this page. The form is linked directly to the product inquiry workflow and is preferable to assuming availability from an older catalog record. State the quantity and packaging requirement, and request a delivery schedule tied to the complete order rather than a partial allocation.
ISL8487EIB vs MAX1483ESA+T - which is better for a low-power RS-485 bus?
The ISL8487EIB and MAX1483ESA+T are both 5 V, 8-pin, low-power RS-485 transceivers with 1/8-unit-load receivers and slew-rate-limited drivers. The MAX1483ESA+T comparison record specifies approximately 20 µA operating current for the MAX1483, while the Renesas ISL8487E family is specified at up to 145 µA quiescent current. Choose by checking every operating-current condition, data-rate requirement, enable behavior, and pin assignment in the relevant manufacturer datasheets.
When should I choose ISL8487EIB over MAX1483ESA+T?
Choose ISL8487EIB when its exact Renesas electrical limits, ISL8487E family feature set, and 8-pin SOIC pin assignment satisfy the design; it provides ±15 kV ESD protection, 1/8-unit loading, and 5 V operation. Select MAX1483ESA+T instead when its approximately 20 µA operating current is important or its documented parameters better fit the bus. Neither choice should be made from package appearance alone; verify enable logic, receiver fail-safe behavior, and propagation timing.
Is the ISL8487EIB suitable for multidrop industrial networks?
The ISL8487EIB is suitable for multidrop industrial networks when the bus topology, termination, and driver-enable strategy are designed correctly. Its 1/8-unit receiver load permits as many as 256 devices in ideal fractional-load conditions, and the family operates from 5 V with low quiescent current. Keep the differential A/B route coupled, control each transmitter’s enable state, and terminate the physical bus at its remote ends rather than at every node.
What can replace ISL8487EIB?
The documented cross-reference candidate is the MAX1483ESA+T, an 8-pin RS-485 transceiver with a 1/8-unit load and slew-rate-limited drive. It may serve as a drop-in candidate, but final approval requires confirmation of the SOIC-8 footprint, pin functions, supply range, data rate, enable polarity, receiver output behavior, ESD rating, and operating-temperature range. Confirm each parameter against the Renesas ISL8487E family datasheet before production substitution.
Is ISL8487EIB the same as MAX1483ESA+T?
The ISL8487EIB and MAX1483ESA+T are not electrically identical even though both are 5 V, 8-pin, low-power, 1/8-unit-load RS-485 transceivers. The comparison record identifies the MAX1483ESA+T as a 20 µA slew-rate-limited device, while the Renesas ISL8487E family specifies up to 145 µA quiescent current and ±15 kV ESD protection. Treat the MAX1483ESA+T as a candidate replacement, not an automatic substitute, until timing and pin-level requirements are verified.
What is the best Renesas equivalent for ISL8487EIB?
The closest documented Renesas family choices are the ISL8487E, ISL81487L, and ISL81487E devices listed in the manufacturer family datasheet. Their suitability depends on the required data rate, slew-rate behavior, temperature grade, and ordering package because the family contains both high-speed and slew-rate-limited implementations. The ISL8487EIB should be retained when its exact suffix and manufacturer electrical guarantees are required; otherwise, compare the specific family member against every parameter affecting the bus.

エンジニアリング参考データ: ISL8487EIB — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ISL8487EIB when the design requires a Renesas 5 V RS-485/RS-422 transceiver, a 1/8-unit receiver load, and documented ±15 kV ESD protection on the external bus pins. It is particularly suitable for industrial multidrop and multipoint links where fractional loading and robust balanced signaling matter. The family datasheet contains both high-speed and slew-rate-limited versions, so select the exact ISL8487E variant according to data rate and EMI requirements.

Evaluate MAX1483ESA+T when its approximately 20 µA operating current is advantageous or when its documented slew-rate-limited behavior is preferred for a lower-rate network. Although both devices use an 8-pin SOIC-style package and offer 1/8-unit loading, do not approve a substitution without checking pin functions, enable polarity, propagation timing, receiver behavior, ESD rating, temperature range, and package dimensions. For point-to-point RS-422, multidrop RS-485, or any mixed industrial installation, validate the complete bus and termination strategy rather than judging only by pin count.

代替品との比較

パラメータ この製品 MAX1483ESA+T
Package 8-pin SOIC 8-pin NSOIC
Brand Renesas Electronics Maxim Integrated
Transceiver Count 1 1
Supported Interfaces RS-485 and RS-422 RS-485 and RS-422
Supply Voltage 5 V 5 V
Receiver Unit Load 1/8 unit load 1/8 unit load
Operating Current 145 µA maximum quiescent current for the ISL8487E family 20 µA
Driver Edge Behavior High-speed or slew-rate-limited family options Slew-rate limited

主な差別化要因

  • Documented ESD protection on every external line pin (vs MAX1483ESA+T)
  • Family supports high-speed and slew-rate-limited drive options (vs MAX1483ESA+T)
  • Multidrop loading supports up to 256 ideal-condition devices (vs MAX1483ESA+T)

設計ノート

Route A and B as a tightly coupled differential pair from the transceiver to the connector or isolation boundary. Match their geometry where practical, avoid splits or stubs, and keep the pair away from switching-node and high-current return paths. Place the transceiver close to the cable-facing protection components so transient current is diverted before reaching sensitive circuitry. Follow the manufacturer recommended-decoupling and exposed-side layout guidance for the 8-pin SOIC.

Termination is a network property rather than a requirement for every node. For conventional RS-485, place termination resistors at the two physical ends of the bus and confirm the resistor value against the transceiver documentation and cable impedance. Slew-rate-limited family members reduce edge-rate-related EMI and ringing, but the exact ISL8487E variant and its data-rate limit must still be checked before using that behavior as a substitute for correct topology.

Do not enable multiple bus drivers simultaneously. Firmware or hardware logic should grant the transmitter permission only after the controller has completed reception and should provide adequate turnaround time for a multidrop bus. Also verify that the replacement transceiver’s enable polarity, receiver-output state, propagation delay, and fail-safe behavior match the original design; identical SOIC-8 packages alone do not establish functional interchangeability.

Keep external cable wiring away from sensitive analog and clock paths, and use the chassis or shield as the return path for common-mode surge energy where the system design permits it. The family’s ±15 kV ESD protection helps at driver outputs and receiver inputs, but it does not replace a complete board-level surge and ESD strategy. Keep unprotected external conductors away from the IC and use the protection network shown in the manufacturer application material.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer family datasheet confirms ESD protection and BiCMOS construction but the product records do not explicitly establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact ISL8487EIB ordering code.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ISL8487EIB datasheet ISL8487EIB datasheet pdf ISL8487EIB pinout ISL8487EIB equivalent ISL8487EIB replacement ISL8487EIB cross reference ISL8487EIB vs MAX1483ESA+T ISL8487EIB price ISL8487EIB stock Renesas ISL8487EIB ISL8487EIB 5V RS-485 transceiver ISL8487EIB 8-SOIC pinout ISL8487EIB industrial multidrop bus ISL8487EIB application circuit

関連部品&用語

Renesas Electronics ISL8487EIB ISL8487E ISL81487L ISL81487E MAX1483ESA+T Maxim Integrated RS-485 transceiver RS-422 transceiver balanced differential signaling interface IC semiconductor 1/8 unit load ±15 kV ESD protection 5 V power supply 145 µA quiescent current 250 kbps data rate BiCMOS SOIC-8 surface mount industrial process automation remote meter reading multidrop bus common-mode rejection slew-rate-limited driver
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示