Microchip Technology

LAN9255-V/ZMX019 - 2/3-Port EtherCAT Controller | Microchip

部品番号: LAN9255-V/ZMX019 ✓ 生産中
3.3 V Vdss 128-pin TQFP (ZMX), 14 x 14 mm Package 512K Memory
MOQ: 1 |

LAN9255-V/ZMX019 概要

The Microchip Technology LAN9255-V/ZMX019 is a 2/3-port EtherCAT device controller with integrated PHYs and an embedded SAM E53J 32-bit Arm Cortex-M4F microcontroller, supplied in a 128-pin TQFP package. It combines EtherCAT slave-controller functionality, dual 100BASE-TX PHY transceivers, 512K programmable memory, and a 3.3 V supply requirement in one package.

An EtherCAT device controller, or ESC, is a specialized communications semiconductor that manages distributed real-time fieldbus traffic and provides the electrical interface between an EtherCAT master and downstream slave devices. The LAN9255-V/ZMX019 combines that controller function with a general-purpose microcontroller, allowing EtherCAT communication and application-specific control logic to share one device while retaining access to the LAN9253 and SAM E53J signal sets.

The controller supports two or three EtherCAT ports, with two integrated full-duplex 100BASE-TX PHYs operating at 100 Mbps. A 512K programmable-memory configuration is indicated by the ZMX019 order code. The integrated SAM E53J core is based on the Arm Cortex-M4F architecture with hardware floating-point capability. The -V device is identified in the Microchip ordering guide as an extended-industrial temperature option, while ZMX identifies the 128-pin TQFP package.

The Ethernet side includes IEEE 802.3 controller functionality, RMII, USB 2.0, and serial flash interfaces identified in the product listings. Integrating the PHYs removes the need for separate Ethernet transceiver circuits in the standard EtherCAT port implementation. The microcontroller and EtherCAT signals are brought to package pins, allowing the hardware design to follow the pin-assignment and reference-layout guidance in the LAN9255 data sheet and hardware design checklist.

Typical uses include industrial servo drives, motion controllers, programmable automation controllers, I/O modules, robotics, and factory equipment that must exchange cyclic process data over EtherCAT. The same integration is useful in embedded machine-control systems where board space, deterministic communication, and local real-time processing are all important.

A critical design consideration is that the LAN9255 combines two functional blocks whose clocks, reset behavior, interfaces, and firmware must be coordinated. Follow the manufacturer's decoupling, PHY magnetics, crystal, and exposed-pad requirements exactly, and use the hardware design checklist as a PCB review reference before fabrication.

This page consolidates the verified family specifications, temperature and memory order-code differences, package constraints, and practical implementation considerations into one engineering reference. It also distinguishes true order-code alternatives from functional Ethernet devices that use different packages and cannot replace the part without a PCB redesign.

ドロップイン代替品: LAN9255-V/ZMX019 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LAN9255-V/ZMX019 (同一形状・フットプリント) — 相違点: Operating Temperature, Package, Integrated MCU, Supply Voltage, EtherCAT Port Configuration.

Microchip Technology
Operating Temperature: -40 C to +85 C (Industrial)
Package: 128-TQFP (14x14 mm)
Integrated MCU: Microchip SAM E53J ARM Cortex-M4F with FPU
Microchip Technology
Operating Temperature: -40°C to +105°C
Package: 128-pin TQFP with exposed pad
EtherCAT Port Configuration: 2/3-port
Microchip Technology
Operating Temperature: -40C to +85C (industrial)
Package: 128-TQFP-EP (14x14 mm)
Integrated MCU: SAM E53J ARM Cortex-M4F

LAN9255-I/ZMX019

✅ ドロップイン
Microchip Technology
📦 128-TQFP (ZMX, 14x14 mm)
2/3-Port EtherCAT Device Controller (ESC) with integrated dual PHYs and ARM Cortex-M4F MCU · 2 external ports (Port 0, Port 1) + 1 cascaded/loopback Port 2 · Dual integrated 100BASE-TX transceivers, full-duplex · 100 Mbps (100BASE-TX) · USB 2.0 Full-Speed (12 Mbps), RMII · Microchip SAM E53J ARM Cortex-M4F with FPU · 512 kB · IEEE 802.3, USB 2.0, RMII, SPI (host)

価格はお問い合わせください

データシートを見る →

LAN9255/ZMX019

✅ ドロップイン
📦 128-TQFP (ZMX, 14x14 mm)
Same LAN9255 architecture, 512K memory, and ZMX footprint; standard commercial-temperature option instead of the -V extended-industrial grade

📋 参考代替品(カタログ未掲載)

LAN9255-V/ZMX020

✅ ドロップイン
Microchip Technology
📦 128-TQFP (ZMX, 14x14 mm)
EtherCAT Slave Controller with integrated MCU · EtherCAT (IEC 61158) · 2/3 ports (EtherCAT) · Dual integrated 100BASE-TX · 100 Mbps full-duplex · SAM E53J ARM Cortex-M4F · 32-bit ARM Cortex-M4F with FPU · 1024 KB

価格はお問い合わせください

データシートを見る →

LAN9255-I/ZMX020

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 128-TQFP (ZMX, 14x14 mm)
2/3-port EtherCAT device controller with integrated MCU · SAM E53J 32-bit Arm Cortex-M4F · 20 MHz · 1.024 MB · IEEE 802.3 · 100 Mbps · Dual 100BASE-TX PHYs · Full duplex

価格はお問い合わせください

データシートを見る →

LAN9255/ZMX020

✅ ドロップイン ⚠️ 仕様未検証
📦 128-TQFP (ZMX, 14x14 mm)
Same LAN9255 architecture and ZMX footprint, with 1024K memory versus 512K; commercial-temperature designation differs from the -V grade

📋 参考代替品(カタログ未掲載)

LAN9255-V/ZMX019 仕様

Device Type 2/3-port EtherCAT device controller
Integrated MCU SAM E53J with 32-bit Arm Cortex-M4F core
Integrated PHYs 2 full-duplex 100BASE-TX transceivers
Ethernet Data Rate 100 Mbps
EtherCAT Port Configuration 2 or 3 ports
Programmable Memory 512K
電源電圧 3.3 V
動作温度 -40°C to +105°C (Extended Industrial, -V)
パッケージ 128-pin TQFP (ZMX), 14 x 14 mm
Ethernet Standard IEEE 802.3
USB Interface USB 2.0
MAC Interface RMII
SPI Interface SQI
Microchip Technology Product Page LAN9255
実装タイプ Surface mount

LAN9255-V/ZMX019 128-pin tqfp (zmx), 14 x 14 mm ピン配置ガイド

LAN9255-V/ZMX019 (128-pin tqfp (zmx), 14 x 14 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

LAN9255-V/ZMX019 の 128-pin tqfp (zmx), 14 x 14 mm パッケージピン配置図

詳細なピン配置データはありません: LAN9255-V/ZMX019.

詳細は データシート をご参照ください。

主な用途

LAN9255-V/ZMX019 の用途: 6 件s: Industrial EtherCAT Servo Drive, Distributed Motion and Robotics Controller, Programmable Automation I/O Module, Machine Vision Data Gateway, EtherCAT-Connected Power Electronics Controller, Embedded Test and Measurement Front End.

🏭

Industrial EtherCAT Servo Drive

The LAN9255-V/ZMX019 fits an EtherCAT servo-drive controller because it combines cyclic network communication with a 32-bit Arm Cortex-M4F processor in one 128-pin TQFP. The two integrated 100BASE-TX PHYs support the 100 Mbps EtherCAT interface while the MCU executes current-loop, position-loop, and fieldbus tasks locally. Its -40°C to +105°C extended-industrial range suits factory equipment with elevated ambient temperatures. Using one package reduces PCB area and avoids adding a separate Ethernet transceiver, although clocking, reset coordination, and exposed-pad thermal design must follow the Microchip hardware checklist.

🤖

Distributed Motion and Robotics Controller

The LAN9255-V/ZMX019 is useful in robotic arms, machine controllers, and distributed automation nodes that exchange real-time motion data over EtherCAT. Its Cortex-M4F core provides hardware floating-point support for control-loop calculations, while the integrated 100BASE-TX PHYs eliminate external PHY placement around the package. A 2/3-port architecture supports daisy-chained EtherCAT topologies without separate Ethernet silicon for each standard port. The design trade-off is firmware complexity: EtherCAT stack integration, the embedded MCU, memory mapping, and deterministic interrupt scheduling must be planned together from the start.

🔧

Programmable Automation I/O Module

The LAN9255-V/ZMX019 can serve as the communications and processing core of a programmable I/O module connected to an EtherCAT master. The integrated PHYs provide two full-duplex 100 Mbps links, and the 512K memory configuration gives the SAM E53J MCU room for an EtherCAT stack plus local channel logic. The extended-industrial temperature option supports factory cabinets where temperature variation is significant. Because the device combines communications and control functions, the module designer should partition memory and firmware carefully and validate watchdog behavior, boot sequencing, and diagnostic reporting.

📷

Machine Vision Data Gateway

The LAN9255-V/ZMX019 can bridge machine-vision or inspection data into an EtherCAT network while performing local packet and control processing. Its two 100BASE-TX PHYs support EtherCAT connectivity, and the Cortex-M4F core is capable of handling protocol tasks and real-time control in the same device. The 128-pin TQFP package provides access to the LAN9253 EtherCAT signals and SAM E53J MCU signals, supporting custom external interfaces. Keep high-speed or noisy vision circuitry on separate power and ground domains, and follow the manufacturer's isolation and return-path guidance to prevent EtherCAT timing degradation.

⚡

EtherCAT-Connected Power Electronics Controller

The LAN9255-V/ZMX019 is appropriate for power-conversion equipment that accepts commands and returns diagnostics over EtherCAT while local MCU code executes supervisory functions. The 100 Mbps PHYs satisfy the Ethernet data rate, and the Cortex-M4F core provides efficient control processing without requiring a separate communications processor. Its extended-industrial range supports industrial power cabinets. The controller does not replace the power stage itself, so isolation, current sensing, gate-drive timing, and safety shutdown circuits remain separate hardware responsibilities; validate those paths independently of the EtherCAT firmware.

📊

Embedded Test and Measurement Front End

The LAN9255-V/ZMX019 can act as the network-facing controller in a distributed test or measurement instrument, receiving cyclic commands from an EtherCAT master and executing local acquisition-control firmware on the Cortex-M4F core. The integrated PHYs reduce the number of external network components, while 512K memory accommodates an EtherCAT stack and control routines. The device is best suited to compact multi-axis measurement hardware rather than high-bandwidth bulk transfer, because the integrated Ethernet interface is 100 Mbps. Separate analog, precision-timing, and isolation circuitry should be partitioned carefully from the digital controller.

What is the LAN9255-V/ZMX019?
The LAN9255-V/ZMX019 is a Microchip Technology 2/3-port EtherCAT device controller that integrates two 100BASE-TX PHYs and a SAM E53J microcontroller with a 32-bit Arm Cortex-M4F core. The 019 order code designates 512K programmable memory, while ZMX denotes the 128-pin TQFP package. According to the Microchip LAN9255 data sheet, it is intended for compact industrial EtherCAT slave designs.
What are the key specifications of LAN9255-V/ZMX019 that engineers should know?
The LAN9255-V/ZMX019 combines EtherCAT, dual 100 Mbps PHYs, and a Cortex-M4F microcontroller in one 128-pin TQFP. Its -V order code identifies the extended-industrial temperature option, rated from -40°C to +105°C, and its 019 code identifies 512K programmable memory. The device operates from 3.3 V and includes IEEE 802.3, RMII, USB 2.0, and SQI interfaces according to the Microchip data sheet and product listings.
How many EtherCAT ports and PHYs does the LAN9255 support?
The LAN9255 supports a 2/3-port EtherCAT configuration and includes two integrated full-duplex 100BASE-TX PHYs. Each PHY operates at 100 Mbps, as stated in the Microchip product page. This integration reduces the external component count for an EtherCAT interface while retaining separate PHY circuitry for the standard network connections.
Where can I download the LAN9255-V/ZMX019 datasheet PDF?
The official LAN9255 data sheet is available from Microchip Technology at the manufacturer PDF link listed on this page. The document is titled as the LAN9255 2/3-Port EtherCAT Device Controller with Integrated PHYs and SAM E53J 32-bit ARM Cortex-M4F MCU. It contains device specifications, electrical characteristics, and package information that should govern the final schematic and layout.
Where can I find the LAN9255-V/ZMX019 pinout?
The authoritative pinout is the pin-description table and package drawing in the Microchip LAN9255 data sheet, while the LAN9255 Hardware Design Checklist provides additional implementation guidance. The ZMX package is a 128-pin TQFP with a 9.0 mm exposed pad. Use those manufacturer documents when assigning every signal, the exposed-pad connection, and the PCB land pattern.
Can LAN9255-I/ZMX019 replace LAN9255-V/ZMX019?
The LAN9255-I/ZMX019 is a closely related same-package LAN9255 configuration with 512K memory and the same 128-pin TQFP format, but its temperature-grade code differs from the -V version. Compatibility therefore depends on the environmental requirement and the exact operating limits assigned to each order code. Confirm the temperature range and pin-level requirements in the LAN9255 ordering guide before substituting it.
What is the best drop-in replacement for LAN9255-V/ZMX019?
The closest drop-in choices are Microchip LAN9255 order-code variants using the same ZMX 128-pin TQFP footprint and 512K memory configuration, such as LAN9255-I/ZMX019 or LAN9255/ZMX019. The practical difference is temperature grade or commercial versus industrial treatment rather than footprint. No cross-brand drop-in replacement is identified for this highly integrated EtherCAT controller and Cortex-M4F MCU combination.
When should I choose LAN9255-V/ZMX019 over a discrete EtherCAT controller?
Choose LAN9255-V/ZMX019 when an EtherCAT slave design also needs local real-time control and board area is constrained. Integrating the EtherCAT controller, two PHYs, and the Cortex-M4F MCU eliminates a separate processor and external PHY design. The trade-off is that firmware, clocking, reset, and application-code development must handle both the EtherCAT and MCU subsystems inside one package.
Is LAN9255-V/ZMX019 suitable for industrial motor-control equipment?
The LAN9255-V/ZMX019 is suitable for industrial EtherCAT motion and machine-control equipment when its -40°C to +105°C extended-industrial range matches the system environment. Its 100 Mbps PHYs and Cortex-M4F processor support cyclic EtherCAT communication alongside local control tasks. The system designer must still implement the required protection, isolation, connectors, and functional-safety architecture around the controller.
What can replace LAN9255-V/ZMX019?
The nearest replacements are same-family Microchip LAN9255 variants in the 128-pin ZMX package, particularly LAN9255-I/ZMX019 and LAN9255/ZMX019, with 512K memory and the same integrated EtherCAT, PHY, and Cortex-M4F architecture. Verify temperature grade, exposed-pad layout, firmware support, and lifecycle requirements. A generic Ethernet controller is not an electrical or functional drop-in replacement.
Is the LAN9255-V/ZMX019 the same as LAN9255/ZMX019?
They are not identical order codes. The LAN9255-V/ZMX019 carries the extended-industrial -V temperature designation, while LAN9255/ZMX019 is the standard commercial-temperature ordering option; both use the ZMX package code and the 019 code for 512K memory. They share the same package family, but environmental qualification can make one preferable and the other unsuitable for a deployment.
Where can I buy LAN9255-V/ZMX019 and what is the lead time?
Use the Request a Quote form on this page to request current LAN9255-V/ZMX019 pricing, stock confirmation, and production lead time. Quote-based fulfillment lets the order be checked against current inventory and manufacturing schedules. The exact quantity break and delivery commitment should be confirmed at the time of quotation rather than inferred from historical listings.
What is the price of LAN9255-V/ZMX019?
Current LAN9255-V/ZMX019 pricing is managed through the Request a Quote form on this page. The form captures the required quantity and packaging arrangement so the unit price and extended cost can reflect the actual order. Because component pricing changes with availability and volume, request a quotation for current commercial terms rather than relying on an archived unit price.
Is LAN9255-V/ZMX019 in stock?
Stock availability for LAN9255-V/ZMX019 should be confirmed through the Request a Quote form on this page. The form is the commercial channel for a current availability answer tied to the requested quantity. If an urgent production allocation is required, include the required quantity, target date, and tray or tape-and-reel packaging preference in the request.
What is the best Microchip equivalent for LAN9255-V/ZMX019?
The best Microchip equivalents are the same-family LAN9255-I/ZMX019 and LAN9255/ZMX019 parts, both identified with the ZMX 128-pin TQFP package and 019 memory configuration. Their order codes differ in temperature treatment, so the appropriate choice depends on environmental requirements rather than package compatibility. LAN9255 variants with the 020 code increase memory to 1024K but are better described as an upgrade than a drop-in substitute.

エンジニアリング参考データ: LAN9255-V/ZMX019 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Select the LAN9255-V/ZMX019 when the design requires an integrated EtherCAT slave controller, two 100 Mbps PHYs, and local Cortex-M4F execution in a single 128-pin TQFP. Its extended-industrial temperature designation is appropriate for factory equipment operating across a wide ambient range. Choose LAN9255-I/ZMX019 when the industrial temperature designation better matches the specification, or LAN9255/ZMX019 for a standard commercial-temperature installation with the same 512K memory configuration. Consider LAN9255-V/ZMX020 when firmware needs more than 512K of programmable memory; its shared footprint simplifies the transition, although it is a memory upgrade rather than an identical part. No cross-brand drop-in equivalent is identified because the EtherCAT controller, integrated PHYs, MCU architecture, firmware dependencies, and exposed-pad implementation make this a highly application-specific device.

代替品との比較

パラメータ この製品 LAN9255-I/ZMX019 LAN9255/ZMX019 LAN9255-V/ZMX020 LAN9255-I/ZMX020 LAN9255/ZMX020
Package 128-TQFP (ZMX, 14x14 mm) 128-TQFP (ZMX, 14x14 mm) - same 128-TQFP (ZMX, 14x14 mm) - same 128-TQFP (ZMX, 14x14 mm) - same 128-TQFP (ZMX, 14x14 mm) - same 128-TQFP (ZMX, 14x14 mm) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Temperature Designation -V extended industrial -I industrial Standard commercial -V extended industrial -I industrial Standard commercial
Programmable Memory 512K 512K - same 512K - same 1024K 1024K 1024K
Integrated MCU SAM E53J with 32-bit Arm Cortex-M4F SAM E53J with 32-bit Arm Cortex-M4F SAM E53J with 32-bit Arm Cortex-M4F SAM E53J with 32-bit Arm Cortex-M4F SAM E53J with 32-bit Arm Cortex-M4F SAM E53J with 32-bit Arm Cortex-M4F
Integrated PHY Count 2 full-duplex 100BASE-TX PHYs 2 full-duplex 100BASE-TX PHYs 2 full-duplex 100BASE-TX PHYs 2 full-duplex 100BASE-TX PHYs 2 full-duplex 100BASE-TX PHYs 2 full-duplex 100BASE-TX PHYs
Ethernet Data Rate 100 Mbps 100 Mbps 100 Mbps 100 Mbps 100 Mbps 100 Mbps
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V

主な差別化要因

  • Combines EtherCAT controller, dual PHYs, and Cortex-M4F processing (vs KSZ8041TLI-TR)
  • Extended-industrial operating-temperature designation (vs LAN9255/ZMX019)
  • Higher embedded memory option in the same footprint (vs LAN9255-V/ZMX019)

設計ノート

Use the Microchip LAN9255 Hardware Design Checklist as the primary PCB review document before routing or fabrication. Pay particular attention to the 128-pin TQFP footprint, exposed-pad connection, power-plane geometry, and PHY trace routing. Maintain the datasheet-specified component placement and decoupling arrangement, and use continuous ground references beneath the high-speed Ethernet and MCU sections to minimize return-path discontinuities.

Route each Ethernet differential pair as a controlled-impedance pair with symmetrical geometry and continuous reference planes. Keep the PHY connections and magnetics-interface area isolated from switching power stages and noisy MCU signals. Avoid vias in the differential pair where possible, and observe the manufacturer spacing and isolation guidance between the EtherCAT interfaces and unrelated external circuits.

Decouple the 3.3 V supply close to every applicable power pin and follow the exact capacitor values and placement in the manufacturer reference design. The device contains both Ethernet and microcontroller circuitry, so supply transients can affect communications as well as computation. Validate startup sequencing, reset behavior, and the exposed-pad thermal path under maximum local processing and EtherCAT traffic.

Do not treat the Ethernet PHY data rate as the memory or firmware capacity, and do not substitute a generic Ethernet controller for this integrated part. Firmware must coordinate the EtherCAT stack with the SAM E53J Cortex-M4F application, including watchdog, reset, timing, and memory protection. Review order-code memory and temperature differences before release because the 019 and 020 suffixes are not interchangeable in firmware sizing.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance statements are not printed in the manufacturer and distributor listings represented for this part. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations with Microchip Technology for the exact order code before environmental qualification.

関連検索

lan9255 ethercat lan9255 i zmx020 lan9255 board microchip lan9255 LAN9255-V/ZMX019 datasheet LAN9255-V/ZMX019 datasheet pdf LAN9255-V/ZMX019 pinout LAN9255-V/ZMX019 equivalent LAN9255-V/ZMX019 replacement LAN9255-V/ZMX019 128 TQFP LAN9255-V/ZMX019 512K memory LAN9255-V/ZMX019 price LAN9255 Cortex-M4F EtherCAT controller

関連部品&用語

Microchip Technology LAN9255-V/ZMX019 LAN9255 LAN9253 SAM E53J Arm Cortex-M4F EtherCAT device controller EtherCAT slave controller IEEE 802.3 100BASE-TX 100 Mbps RMII USB 2.0 SQI 128-pin TQFP ZMX package 9.0 mm exposed pad 512K programmable memory 3.3 V power supply Extended industrial temperature Industrial servo drive Factory automation Robotics controller EtherCAT communication
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示