LC4128V-5T100I - 128-Macro-Cell 227 MHz CPLD | Lattice
部品番号: LC4128V-5T100I ✗ 生産終了LC4128V-5T100I 概要
A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic blocks with a nonvolatile configuration architecture. The LC4128V belongs to the hierarchy of programmable logic devices, CPLDs, digital semiconductors, and programmable logic. Its in-system programmability permits configuration through the device interface without requiring the logic array to be removed from the circuit board.
Key features include 128 macro cells, 64 user I/O pins, a 3.3 V supply, a -5 speed designation, and in-system programming. The manufacturer describes the ispMACH 4000 family as a SuperFAST high-density PLD architecture that blends ispLSI 2000 and ispMACH 4A characteristics. These attributes make the part appropriate for compact glue-logic, interface control, bus decoding, state-machine, and industrial control designs requiring deterministic programmable logic.
The device supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLDs according to the family datasheet. Its listed 200 MHz internal frequency, 380 MHz maximum operating frequency, and 2.5 ns propagation delay indicate a high-speed architecture for moderate-complexity designs. The manufacturer datasheet also identifies up to four global clock pins with programmable functions, a useful resource for synchronous state machines and clocked interface logic.
Typical applications include industrial controller interface logic, communications equipment line-card control, instrumentation address decoding, data-acquisition control, and embedded system peripheral multiplexing. The 100-pin TQFP package provides 64 user I/O pins for designs that require more connectivity than a small PLD can offer while retaining a conventional surface-mount footprint.
Designers should verify the exact pin names, configuration requirements, supply sequencing, clock behavior, and programming interface against the manufacturer datasheet before layout release. PCB implementation should reserve the documented configuration pins, provide clean power and ground distribution, and route high-speed clock and I/O signals with short, controlled-impedance paths.
This page combines the device architecture, package information, lifecycle status, compatible family variants, comparison data, and practical implementation guidance to support design selection before schematic capture.
ドロップイン代替品: LC4128V-5T100I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
LC4128V-5T100C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4128C-5T100I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4128V-5T100I 最大定格&電気的特性
| Device Type | Complex programmable logic device (CPLD) |
| Product Family | ispMACH 4000V |
| Architecture | SuperFAST high-density PLD |
| Macro Cells | 128 macro cells |
| User I/O | 64 user I/O pins |
| Product Frequency | 227 MHz |
| Internal Frequency | 200 MHz |
| Maximum Operating Frequency | 380 MHz |
| Propagation Delay | 2.5 ns |
| Nominal Supply Voltage | 3.3 V |
| Supported Supply Voltages | 3.3 V, 2.5 V, and 1.8 V |
| Programmability | In-system programmable |
| Global Clock Pins | Up to 4 programmable global clock pins |
| パッケージ | 100-pin TQFP, 0.5 mm pitch |
| Temperature Grade | Industrial |
| Logic Family | CMOS |
LC4128V-5T100I 100-pin tqfp, 0.5 mm pitch ピン配置ガイド
LC4128V-5T100I (100-pin tqfp, 0.5 mm pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LC4128V-5T100I.
詳細は データシート をご参照ください。
主な用途
LC4128V-5T100I の用途: 6 件s: Industrial Controller Interface Logic, Communications Line-Card Control, Data-Acquisition Control, Instrumentation Address Decoding, Embedded Peripheral Multiplexing, LED and Display Sequencing.
Industrial Controller Interface Logic
The LC4128V-5T100I fits industrial controller interface logic because its 128 macro cells can consolidate address decoding, command qualification, alarm handling, and protocol state machines without requiring a large FPGA. The 64 user I/O pins provide practical connectivity for sensors, actuators, status indicators, and external memory interfaces, while the industrial grade is identified directly in the product records. A 2.5 ns propagation-delay figure supports timing-sensitive control paths, and as many as four programmable global clock pins simplify synchronous design partitioning. The 3.3 V nominal supply and 100-pin TQFP package also align with conventional industrial controller boards.
おすすめ
Communications Line-Card Control
The LC4128V-5T100I is appropriate for communications line-card control where framing logic, command filtering, status registers, and multiple clock domains must be implemented in a compact programmable device. Its 64 user I/O pins can support parallel data, control, and indicator signals, while the 128 macro cells provide capacity beyond simple single-gate glue logic. The listed 227 MHz product frequency, 200 MHz internal frequency, and 380 MHz maximum operating frequency make it useful for moderate-speed datapath control. Designers should use dedicated global-clock resources for synchronous interfaces and verify line-rate timing against the exact configuration.
おすすめ
Data-Acquisition Control
The LC4128V-5T100I can implement acquisition sequencing, channel selection, trigger routing, and data-ready control around analog or mixed-signal converters. The CPLD provides 64 user I/O pins for parallel converter interfaces, capture signals, and control outputs, while its 128 macro cells can consolidate multiple finite state machines into one configurable device. The 2.5 ns propagation delay and programmable global clocks help maintain deterministic control between acquisition events. Board-level design must account for output skew, clock distribution, input thresholds associated with the selected supply voltage, and the timing budget across converters, sensors, and backplane traces.
おすすめ
Instrumentation Address Decoding
For instrumentation and test equipment, the LC4128V-5T100I can combine bus address decoding, register selection, interrupt routing, and instrument mode sequencing in one programmable logic device. Its 64 user I/O pins are useful when the control bus must coexist with front-panel signals and status LEDs, and the 128 macro cells provide enough density for structured decode logic rather than a collection of separate gates. The 100-pin TQFP package supports conventional surface-mount assembly, while the -5 speed designation supports timing paths below the slower family grades. Verify pin multiplexing and configuration compatibility when reusing an existing board.
おすすめ
Embedded Peripheral Multiplexing
The LC4128V-5T100I is useful for multiplexing and decoding among embedded peripherals where a microcontroller requires deterministic hardware-assisted control. Typical tasks include selecting among memory devices, arbitrating buses, translating interrupt levels, sequencing resets, and coordinating power-control signals. With 128 macro cells and 64 user I/O pins, the CPLD can implement several tightly related control functions without occupying most microcontroller pins. Its 3.3 V nominal operation and 2.5 ns propagation-delay figure support high-rate control paths, but designers should check every bank voltage and pin definition in the manufacturer documentation before integrating with mixed-voltage peripherals.
おすすめ
LED and Display Sequencing
The LC4128V-5T100I can drive deterministic LED sequencing, display multiplexing, keypad scanning, and status-indicator logic in industrial panels. Its 64 user I/O pins accommodate multiple display segments, buttons, and indicators, while the programmable clock resources simplify timing shared among scan counters and debounce circuits. The device's 227 MHz product frequency and 2.5 ns propagation delay are more than sufficient for typical human-interface timing, and the 100-pin TQFP package offers a practical pin count for panel-controller boards. Confirm pin drive capability, supply requirements, and multiplexed I/O behavior in the manufacturer pin table before release.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LC4128V-5T100I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LC4128V-5T100C | LC4128C-5T100I |
|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 100-pin TQFP, 0.5 mm pitch | 100-pin TQFP, 0.5 mm pitch | 100-pin TQFP, 0.5 mm pitch |
| Product Family | ispMACH 4000V | ispMACH 4000V | ispMACH 4000C |
| Speed Designation | -5 | -5 | -5 |
| Configuration Method | In-system programmable | In-system programmable | In-system programmable |
主な差別化要因
- Explicit industrial-grade designation (vs LC4128V-5T100C)
- Same -5 timing class in the same TQFP footprint (vs LC4128C-5T100I)
- High-density logic with a moderate pin count (vs LC4128V-5T100C)
設計ノート
Use the manufacturer pin-description table to assign every one of the 100 TQFP leads, especially configuration, clock, supply, and ground pins. Place the device's decoupling capacitors close to the documented power pins and provide an uninterrupted ground reference beneath the package where the footprint permits it. Route configuration signals away from high-speed clock and I/O nets, and preserve the manufacturer-recommended test points so a board assembled with an obsolete CPLD can still be programmed and diagnosed.
Assign system clocks to the documented global-clock pins when possible, because the family supports as many as four programmable global clock pins. Keep clock traces short, avoid stubs, and use a continuous reference plane to reduce timing uncertainty. For external memories or converters, route data and control paths according to the configured I/O standard and validate setup and hold timing with board-level skew included rather than relying only on the stated 2.5 ns propagation-delay figure.
Do not treat a matching package and -5 speed suffix as proof that any 4000-family device is interchangeable. The 4000V and 4000C families may differ in electrical behavior, configuration, or supported I/O functions, and the C suffix also changes the temperature-grade designation. Compare the complete manufacturer pin tables, timing characteristics, supply levels, and configuration files. For an existing board, preserve the original MPN where possible to avoid introducing conversion or level-shifter changes.
Define the board's power architecture around the selected operating voltage and the device's documented supply pins. The target family supports 3.3 V, 2.5 V, and 1.8 V operation, but the allowable combinations and configuration conditions must be taken from the manufacturer datasheet. Provide stable, decoupled supply rails and avoid routing high-current return paths through I/O or clock nets. Where a legacy design used external level conversion, evaluate whether the available 4000V or 4000C candidate supports the same interface arrangement.
コンプライアンス情報
The target is identified as an industrial-grade ispMACH 4000V CPLD, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for this exact MPN.