Lattice Semiconductor

LC4128V-5T100I - 128-Macro-Cell 227 MHz CPLD | Lattice

MPN: LC4128V-5T100I ✗ End of Life
3.3 V Vdss 100-pin TQFP, 0.5 mm pitch Package 227 MHz Speed
MOQ: 1 |

LC4128V-5T100I Overview

Lattice Semiconductor LC4128V-5T100I is a 128-macro-cell in-system-programmable CPLD in the ispMACH 4000V family, specified for 3.3 V operation and housed in a 100-pin TQFP package. The device combines 64 user I/O pins with a 227 MHz product frequency designation, a 2.5 ns propagation-delay figure, and a maximum operating frequency listed as 380 MHz.

A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic blocks with a nonvolatile configuration architecture. The LC4128V belongs to the hierarchy of programmable logic devices, CPLDs, digital semiconductors, and programmable logic. Its in-system programmability permits configuration through the device interface without requiring the logic array to be removed from the circuit board.

Key features include 128 macro cells, 64 user I/O pins, a 3.3 V supply, a -5 speed designation, and in-system programming. The manufacturer describes the ispMACH 4000 family as a SuperFAST high-density PLD architecture that blends ispLSI 2000 and ispMACH 4A characteristics. These attributes make the part appropriate for compact glue-logic, interface control, bus decoding, state-machine, and industrial control designs requiring deterministic programmable logic.

The device supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLDs according to the family datasheet. Its listed 200 MHz internal frequency, 380 MHz maximum operating frequency, and 2.5 ns propagation delay indicate a high-speed architecture for moderate-complexity designs. The manufacturer datasheet also identifies up to four global clock pins with programmable functions, a useful resource for synchronous state machines and clocked interface logic.

Typical applications include industrial controller interface logic, communications equipment line-card control, instrumentation address decoding, data-acquisition control, and embedded system peripheral multiplexing. The 100-pin TQFP package provides 64 user I/O pins for designs that require more connectivity than a small PLD can offer while retaining a conventional surface-mount footprint.

Designers should verify the exact pin names, configuration requirements, supply sequencing, clock behavior, and programming interface against the manufacturer datasheet before layout release. PCB implementation should reserve the documented configuration pins, provide clean power and ground distribution, and route high-speed clock and I/O signals with short, controlled-impedance paths.

This page combines the device architecture, package information, lifecycle status, compatible family variants, comparison data, and practical implementation guidance to support design selection before schematic capture.

Drop-in alternatives for LC4128V-5T100I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

LC4128V-5T100C

✅ Drop-In
📦 100-pin TQFP, 0.5 mm pitch
Same 4000V family, -5 speed grade, and 100-pin TQFP footprint; the C suffix replaces the industrial I suffix, with 0 ns speed-grade difference.

📋 Reference alternative (not in catalog)

LC4128C-5T100I

✅ Drop-In
📦 100-pin TQFP, 0.5 mm pitch
Same -5 speed grade and 100-pin TQFP footprint; the 4000C family designation replaces 4000V, with 0 ns speed-grade difference.

📋 Reference alternative (not in catalog)

LC4128V-5T100I Maximum Ratings & Electrical Characteristics

Device Type Complex programmable logic device (CPLD)
Product Family ispMACH 4000V
Architecture SuperFAST high-density PLD
Macro Cells 128 macro cells
User I/O 64 user I/O pins
Product Frequency 227 MHz
Internal Frequency 200 MHz
Maximum Operating Frequency 380 MHz
Propagation Delay 2.5 ns
Nominal Supply Voltage 3.3 V
Supported Supply Voltages 3.3 V, 2.5 V, and 1.8 V
Programmability In-system programmable
Global Clock Pins Up to 4 programmable global clock pins
Package 100-pin TQFP, 0.5 mm pitch
Temperature Grade Industrial
Logic Family CMOS

LC4128V-5T100I 100-pin tqfp, 0.5 mm pitch Pin Configuration Guide

Pin configuration for LC4128V-5T100I (100-pin tqfp, 0.5 mm pitch package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

100-pin tqfp, 0.5 mm pitch package pinout diagram for LC4128V-5T100I

No detailed pinout data available for LC4128V-5T100I.

Refer to the datasheet for full pin configuration.

Typical Applications

LC4128V-5T100I is suitable for 6 applications: Industrial Controller Interface Logic, Communications Line-Card Control, Data-Acquisition Control, Instrumentation Address Decoding, Embedded Peripheral Multiplexing, LED and Display Sequencing.

🏭

Industrial Controller Interface Logic

The LC4128V-5T100I fits industrial controller interface logic because its 128 macro cells can consolidate address decoding, command qualification, alarm handling, and protocol state machines without requiring a large FPGA. The 64 user I/O pins provide practical connectivity for sensors, actuators, status indicators, and external memory interfaces, while the industrial grade is identified directly in the product records. A 2.5 ns propagation-delay figure supports timing-sensitive control paths, and as many as four programmable global clock pins simplify synchronous design partitioning. The 3.3 V nominal supply and 100-pin TQFP package also align with conventional industrial controller boards.

🌐

Communications Line-Card Control

The LC4128V-5T100I is appropriate for communications line-card control where framing logic, command filtering, status registers, and multiple clock domains must be implemented in a compact programmable device. Its 64 user I/O pins can support parallel data, control, and indicator signals, while the 128 macro cells provide capacity beyond simple single-gate glue logic. The listed 227 MHz product frequency, 200 MHz internal frequency, and 380 MHz maximum operating frequency make it useful for moderate-speed datapath control. Designers should use dedicated global-clock resources for synchronous interfaces and verify line-rate timing against the exact configuration.

🖥️

Data-Acquisition Control

The LC4128V-5T100I can implement acquisition sequencing, channel selection, trigger routing, and data-ready control around analog or mixed-signal converters. The CPLD provides 64 user I/O pins for parallel converter interfaces, capture signals, and control outputs, while its 128 macro cells can consolidate multiple finite state machines into one configurable device. The 2.5 ns propagation delay and programmable global clocks help maintain deterministic control between acquisition events. Board-level design must account for output skew, clock distribution, input thresholds associated with the selected supply voltage, and the timing budget across converters, sensors, and backplane traces.

🔧

Instrumentation Address Decoding

For instrumentation and test equipment, the LC4128V-5T100I can combine bus address decoding, register selection, interrupt routing, and instrument mode sequencing in one programmable logic device. Its 64 user I/O pins are useful when the control bus must coexist with front-panel signals and status LEDs, and the 128 macro cells provide enough density for structured decode logic rather than a collection of separate gates. The 100-pin TQFP package supports conventional surface-mount assembly, while the -5 speed designation supports timing paths below the slower family grades. Verify pin multiplexing and configuration compatibility when reusing an existing board.

🧩

Embedded Peripheral Multiplexing

The LC4128V-5T100I is useful for multiplexing and decoding among embedded peripherals where a microcontroller requires deterministic hardware-assisted control. Typical tasks include selecting among memory devices, arbitrating buses, translating interrupt levels, sequencing resets, and coordinating power-control signals. With 128 macro cells and 64 user I/O pins, the CPLD can implement several tightly related control functions without occupying most microcontroller pins. Its 3.3 V nominal operation and 2.5 ns propagation-delay figure support high-rate control paths, but designers should check every bank voltage and pin definition in the manufacturer documentation before integrating with mixed-voltage peripherals.

💡

LED and Display Sequencing

The LC4128V-5T100I can drive deterministic LED sequencing, display multiplexing, keypad scanning, and status-indicator logic in industrial panels. Its 64 user I/O pins accommodate multiple display segments, buttons, and indicators, while the programmable clock resources simplify timing shared among scan counters and debounce circuits. The device's 227 MHz product frequency and 2.5 ns propagation delay are more than sufficient for typical human-interface timing, and the 100-pin TQFP package offers a practical pin count for panel-controller boards. Confirm pin drive capability, supply requirements, and multiplexed I/O behavior in the manufacturer pin table before release.

Recommended Products Summary

LC4128V-5T100C Same-family 4000V device for configuration and sourcing review Used in: Industrial Controller Interface Logic, Communications Line-Card Control, Data-Acquisition Control, Instrumentation Address Decoding, Embedded Peripheral Multiplexing, LED and Display Sequencing LC4128C-5T100I Same-speed, same-package 4000C family comparison Used in: Industrial Controller Interface Logic, Communications Line-Card Control, Data-Acquisition Control, Instrumentation Address Decoding, Embedded Peripheral Multiplexing, LED and Display Sequencing
What is the LC4128V-5T100I?
The LC4128V-5T100I is a 128-macro-cell, 64-user-I/O in-system-programmable CPLD from Lattice Semiconductor's ispMACH 4000V family. According to the manufacturer datasheet, the device is offered in a 100-pin TQFP package with a 3.3 V nominal supply, a 227 MHz product frequency designation, a 2.5 ns propagation delay, and a maximum operating frequency listed as 380 MHz. It is intended for designs that need more connectivity and logic capacity than small low-pin-count PLDs but do not require an FPGA.
Where can I download the LC4128V-5T100I datasheet PDF?
The LC4128V-5T100I datasheet PDF is available through the linked Lattice document archive result on this page. The document covers the ispMACH 4000 family, including the 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD architecture. Use the manufacturer pin-description table, AC timing tables, configuration diagrams, and package drawings when assigning PCB connections or evaluating operating conditions.
What are the key specifications of LC4128V-5T100I that engineers should know?
The LC4128V-5T100I combines 128 macro cells, 64 user I/O pins, in-system programmability, and a 100-pin TQFP package. According to the manufacturer datasheet information, its principal timing figures are 227 MHz product frequency, 200 MHz internal frequency, 2.5 ns propagation delay, and 380 MHz maximum operating frequency. The nominal supply is 3.3 V, while the family description also identifies 2.5 V and 1.8 V support.
Where can I find the LC4128V-5T100I pinout?
The LC4128V-5T100I pinout is found in the pin-description table and package drawing in the manufacturer datasheet. The device is identified as a 100-pin TQFP with 64 user I/O pins and as many as four programmable global clock pins. Use that table for configuration pins, supply connections, grounds, and I/O assignments because the generic package diagram alone does not identify the device-specific functions of every lead.
Is LC4128V-5T100I suitable for industrial control applications?
Yes, the LC4128V-5T100I is explicitly identified as an industrial-grade member of the ispMACH 4000V family. Its 128 macro cells and 64 user I/O pins suit protocol conversion, bus arbitration, state-machine control, and peripheral interfacing, while the 3.3 V supply and 100-pin TQFP package simplify integration into conventional industrial control boards. Final suitability still depends on the complete system timing, environmental requirements, and configuration method.
Can LC4128V-5T100I be used for clocked state-machine logic?
The LC4128V-5T100I is well suited to clocked state-machine and interface logic because the manufacturer lists up to four programmable global clock pins. Its 2.5 ns propagation-delay figure and 380 MHz maximum operating frequency provide ample timing margin for many moderate-speed control paths. Use dedicated global-clock routing for system clocks and treat the stated frequency figures as device-family limits that still require board-level timing verification.
What is the difference between LC4128V-5T100I and LC4128C-5T100I?
Both LC4128V-5T100I and LC4128C-5T100I retain the -5 speed designation and 100-pin TQFP format, but their family designators differ: V for the ispMACH 4000V line and C for the ispMACH 4000C line. The LC4128V-5T100I is identified as industrial, while the C-version product record does not provide a comparable temperature-grade statement. Check device-specific voltage, timing, and pin-definition tables before treating the C part as a direct substitution.
When should I choose LC4128V-5T100I over LC4128V-5T100C?
Choose LC4128V-5T100I when the design specifically requires the ispMACH 4000V line and its industrial-grade identification, while retaining the -5 speed grade and 100-pin TQFP footprint. LC4128V-5T100C shares the -5 grade and package designation, making it a relevant family comparison for cost or lifecycle review. The final choice should account for the complete logic design, device-specific timing tables, operating temperature, and configuration-file compatibility.
What is the best drop-in replacement for LC4128V-5T100I?
No fully verified five-part drop-in replacement set was established for the obsolete LC4128V-5T100I. The closest documented same-family candidates are LC4128V-5T100C and LC4128C-5T100I, both using the 100-pin TQFP format and -5 speed designation, but their electrical details and temperature requirements must be checked before substitution. Request a formal manufacturer or engineering confirmation rather than assuming that a similar MPN is a production drop-in replacement.
Can LC4128C-5T100I replace LC4128V-5T100I?
The LC4128C-5T100I may share the 100-pin TQFP footprint and -5 speed designation, but it belongs to the ispMACH 4000C line rather than the 4000V line. Because a footprint match alone does not prove electrical, timing, configuration, or temperature compatibility, it should not be treated as a confirmed drop-in replacement without reviewing both manufacturer datasheets. The target LC4128V-5T100I is also identified as industrial.
LC4128V-5T100I vs LC4128V-5T100C - which is better for industrial control?
LC4128V-5T100I is the stronger choice when industrial-grade identification is mandatory because the product record explicitly labels it industrial, while LC4128V-5T100C retains the same -5 speed designation and TQFP package format. For non-industrial or cost-focused designs, the C version may be considered only after checking voltage tolerances, timing behavior, configuration compatibility, and lifecycle constraints in the manufacturer documentation.
What can replace LC4128V-5T100I in a legacy design?
The most defensible legacy replacement candidates are LC4128V-5T100C and LC4128C-5T100I because both preserve the -5 speed designation and 100-pin TQFP format. Neither can be declared a guaranteed drop-in replacement solely from the available records, because the product families and operating-grade requirements differ. Preserve the original configuration, validate every pin and timing constraint, and request a quotation for confirmed availability through the Request a Quote form.
Where can I buy LC4128V-5T100I and what is its price?
Use the Request a Quote form on this page to ask for LC4128V-5T100I availability, MOQ, condition, lead time, and a current quotation. The target device is identified by a product-market listing as discontinued and still sourced, so lifecycle confirmation is important before placing an order. The page does not publish a static price because quotation terms can change with quantity, condition, and sourcing availability.
Is LC4128V-5T100I in stock and what is the lead time?
Current stock and a guaranteed lead time should be requested through the Request a Quote form on this page. A distributor result identifies the exact MPN as in stock at the time of that listing, but that observation does not establish present availability or a schedulable production quantity. Because the device is also identified as discontinued, request the lifecycle status, original-condition details, and delivery schedule before committing the design.
What is the best Lattice equivalent for LC4128V-5T100I?
The closest documented Lattice family candidates are LC4128V-5T100C and LC4128C-5T100I, each retaining a 100-pin TQFP format and -5 speed designation. No cross-manufacturer equivalent in the reviewed material was verified as pin- and function-compatible. For an obsolete or legacy design, compare the complete manufacturer pin tables, timing specifications, configuration requirements, and industrial temperature requirements rather than selecting solely by package and speed suffix.

Engineering reference data for LC4128V-5T100I — comparison, design guidance, and compliance information.

Selection Guide

Choose LC4128V-5T100I for a legacy or industrial design that explicitly requires the ispMACH 4000V family, the -5 speed grade, and the 100-pin TQFP footprint. Its 128 macro cells and 64 user I/O pins suit moderate-complexity glue logic, control planes, protocol decoding, and clocked state machines. LC4128V-5T100C is the closest family comparison because it preserves the 4000V line, -5 grade, and TQFP format, but its temperature-grade details and lifecycle must be checked. LC4128C-5T100I preserves the -5 grade, package, and industrial suffix but changes the family from 4000V to 4000C, so configuration, pin behavior, and electrical compatibility require confirmation. Because the target is identified as discontinued and no verified cross-manufacturer drop-in was established, new designs should use a currently supported platform unless source continuity and long-term availability are essential.

Comparison with Alternatives

Parameter This Product LC4128V-5T100C LC4128C-5T100I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 100-pin TQFP, 0.5 mm pitch 100-pin TQFP, 0.5 mm pitch 100-pin TQFP, 0.5 mm pitch
Product Family ispMACH 4000V ispMACH 4000V ispMACH 4000C
Speed Designation -5 -5 -5
Configuration Method In-system programmable In-system programmable In-system programmable

Key Differentiators

  • Explicit industrial-grade designation (vs LC4128V-5T100C)
  • Same -5 timing class in the same TQFP footprint (vs LC4128C-5T100I)
  • High-density logic with a moderate pin count (vs LC4128V-5T100C)

Design Notes

Use the manufacturer pin-description table to assign every one of the 100 TQFP leads, especially configuration, clock, supply, and ground pins. Place the device's decoupling capacitors close to the documented power pins and provide an uninterrupted ground reference beneath the package where the footprint permits it. Route configuration signals away from high-speed clock and I/O nets, and preserve the manufacturer-recommended test points so a board assembled with an obsolete CPLD can still be programmed and diagnosed.

Assign system clocks to the documented global-clock pins when possible, because the family supports as many as four programmable global clock pins. Keep clock traces short, avoid stubs, and use a continuous reference plane to reduce timing uncertainty. For external memories or converters, route data and control paths according to the configured I/O standard and validate setup and hold timing with board-level skew included rather than relying only on the stated 2.5 ns propagation-delay figure.

Do not treat a matching package and -5 speed suffix as proof that any 4000-family device is interchangeable. The 4000V and 4000C families may differ in electrical behavior, configuration, or supported I/O functions, and the C suffix also changes the temperature-grade designation. Compare the complete manufacturer pin tables, timing characteristics, supply levels, and configuration files. For an existing board, preserve the original MPN where possible to avoid introducing conversion or level-shifter changes.

Define the board's power architecture around the selected operating voltage and the device's documented supply pins. The target family supports 3.3 V, 2.5 V, and 1.8 V operation, but the allowable combinations and configuration conditions must be taken from the manufacturer datasheet. Provide stable, decoupled supply rails and avoid routing high-current return paths through I/O or clock nets. Where a legacy design used external level conversion, evaluate whether the available 4000V or 4000C candidate supports the same interface arrangement.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The target is identified as an industrial-grade ispMACH 4000V CPLD, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for this exact MPN.

Related Searches

lc4128v datasheet LC4128V-5T100I datasheet LC4128V-5T100I datasheet pdf LC4128V-5T100I pinout LC4128V-5T100I specifications LC4128V-5T100I equivalent LC4128V-5T100I replacement LC4128V-5T100I cross reference LC4128V-5T100I vs LC4128V-5T100C LC4128V-5T100I footprint Lattice LC4128V-5T100I LC4128V-5T100I price LC4128V-5T100I stock LC4128V-5T100I industrial CPLD

Related Components & Terms

Lattice Semiconductor LC4128V-5T100I LC4128V-5T100C LC4128C-5T100I ispMACH 4000V ispMACH 4000C complex programmable logic device CPLD programmable logic device in-system programmable SuperFAST high-density PLD ispLSI 2000 ispMACH 4A 128 macro cells 64 user I/O TQFP-100 QFP family surface mount SMD CMOS propagation delay global clock industrial control 3.3 V 2.5 V 1.8 V
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details