LFE2-70E-7F672C - 68K LUT ECP2 FPGA, 500 I/O, 672-BBGA
部品番号: LFE2-70E-7F672C ✓ 生産中LFE2-70E-7F672C 概要
An FPGA is a reconfigurable semiconductor in which the logic, memory, and interconnect are configured after fabrication. The ECP2 family combines programmable logic blocks and embedded block RAM with high-speed I/O, placing the device within the broader semiconductor and programmable-logic hierarchy. This makes the LFE2-70E-7F672C suitable when designers need flexible parallel interfaces, configurable data paths, or parallel processing without developing a custom ASIC.
The device provides 68,000 LUTs organized through approximately 8,500 logic-array blocks, together with 1,056,768 bits of block RAM. Its 500 user I/O pins support high-density board-level connectivity, while the -7 speed designation identifies its performance grade. A 1.2 V core operating point is typical of the ECP2 architecture, and the stated core-voltage range is 1.14 V to 1.26 V.
The ECP2 architecture supports parallel programmable logic and dedicated memory resources for control logic, packet handling, fixed-function acceleration, and signal conditioning. Because the routing and configuration are programmable, one board design can support multiple product variants through different bitstreams. Engineers must still account for pin constraints, configuration requirements, interface timing, and banking rules when assigning resources.
Typical applications include industrial automation controllers, networking equipment, video and display processing, communications infrastructure, embedded test systems, and consumer electronics with extensive parallel I/O. The 500-I/O count is especially useful where an application needs numerous data buses, control signals, high-speed memory interfaces, or multiple external peripherals connected to one FPGA.
PCB implementation requires careful attention to the 672-ball fine-pitch footprint and its high I/O count. Follow the manufacturer package data and pinout tables for power, ground, configuration, clock, and user-I/O assignments. Maintain continuous power and ground planes, place decoupling capacitors close to the device, and route high-speed differential signals with controlled impedance to minimize signal-integrity problems.
This page combines device specifications, application guidance, package considerations, and a structured comparison with same-family Lattice options. These engineering details help distinguish exact-ordering variants from lower-speed or different-temperature alternatives and support faster component selection before PCB layout and configuration work begin.
ドロップイン代替品: LFE2-70E-7F672C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
LFE2-70E-7FN672C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LFE2-70E-6F672C
✅ ドロップイン価格はお問い合わせください
データシートを見る →LFE2-70E-5F672C
✅ ドロップイン価格はお問い合わせください
データシートを見る →LFE2-70SE-6FN672C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LFE2-70E-6FN672I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LFE2-70E-7F672C 最大定格&電気的特性
| Device Type | ECP2 field-programmable gate array (FPGA) |
| Logic Capacity | 68,000 LUTs |
| Logic Array Blocks | 8,500 LABs |
| Total Block RAM | 1,056,768 bits |
| User I/O Count | 500 I/O |
| Package Pin Count | 672 balls |
| パッケージ | 672-BBGA, 27 x 27 mm |
| Core Voltage | 1.2 V nominal |
| Core Voltage Range | 1.14 V to 1.26 V |
| Speed Grade | -7 |
| Technology | 90 nm |
| 動作温度範囲 | 0°C to 85°C junction temperature |
| 実装タイプ | Surface mount |
| Device Family | LatticeECP2 |
LFE2-70E-7F672C 672-bbga, 27 x 27 mm ピン配置ガイド
LFE2-70E-7F672C (672-bbga, 27 x 27 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LFE2-70E-7F672C.
詳細は データシート をご参照ください。
主な用途
LFE2-70E-7F672C の用途: 6 件s: Industrial Automation Controller, Networking Packet Processing, Video and Display Interface, High-Speed Data Acquisition, Communication Equipment, Programmable Test and Measurement.
Industrial Automation Controller
The LFE2-70E-7F672C fits industrial automation controllers that combine sequencing, machine-state monitoring, and communication between sensors and actuators. Its 68,000 LUTs and 8,500 logic-array blocks can support control logic, protocol handling, and parallel datapaths, while 500 user I/O reduce the need for external I/O expanders. The -7 speed grade provides additional timing margin for demanding control loops and high-speed field-bus interfaces. The 672-ball package also allows a reusable platform for multiple machine variants without changing the FPGA pin assignment. Before schematic release, assign voltage banks, dedicated clock pins, configuration pins, and high-current outputs according to the manufacturer pinout and power guidelines.
おすすめ
Networking Packet Processing
The LFE2-70E-7F672C is suitable for networking equipment requiring parallel packet classification, buffering, traffic control, and status reporting. The FPGA offers 68,000 LUTs for protocol and finite-state-machine logic, 1,056,768 bits of block RAM for packet storage, and 500 user I/O for external interfaces and management signals. Its -7 speed grade is useful when the design contains timing-critical control paths, although line-rate validation must include the selected transceiver, clocks, PCB channels, and external PHY. The 27 x 27 mm 672-ball footprint makes it practical for dense line cards, but its fine-pitch routing and high I/O count require careful stack-up planning and continuous power distribution.
おすすめ
Video and Display Interface
The LFE2-70E-7F672C can implement video timing, pixel routing, overlay composition, and interface conversion because it combines 68,000 LUTs with 500 user I/O. Parallel video interfaces benefit from the large I/O count, while block RAM supports line buffers, frame storage, and pipeline stages. The -7 speed grade provides a useful margin for wide parallel data paths, although pixel-clock rate, synchronization polarity, and output timing must be checked against the target display specification. Because the device is not a fixed-function display controller, the design also needs explicit timing generators, color-space handling, and initialization sequence in the FPGA configuration. Board planning should separate high-speed display routing from slower control signals and preserve solid ground references.
おすすめ
High-Speed Data Acquisition
The LFE2-70E-7F672C is appropriate for instrumentation and data-acquisition systems requiring numerous parallel sensor inputs, digital conversion outputs, timing capture, and real-time filtering. Its 500 user I/O can connect multiple converters and interface blocks, while 68,000 LUTs and 1,056,768 bits of block RAM support parallel sample pipelines and local buffering. The -7 performance grade helps close timing on wide synchronous datapaths, but acquisition accuracy remains dependent on converter timing, clock jitter, voltage thresholds, and analog layout. Use the manufacturer I/O standards to select compatible banks and verify whether differential or single-ended operation is required. Configuration storage and clock-distribution design should be completed before committing to the 672-ball PCB footprint.
おすすめ
Communication Equipment
The LFE2-70E-7F672C suits communication equipment that needs configurable framing, channel processing, clock recovery support, and management logic. The 68,000 LUTs enable parallel protocol engines and finite-state machines, while 1,056,768 bits of block RAM accommodate payload buffering and test patterns. Its 500 user I/O provide access to parallel data buses, status signals, and external transceivers. The -7 speed grade offers additional timing margin over -6 and -5 alternatives when interfaces operate at demanding clock rates. Engineering validation should include signal-integrity analysis, clock-jitter budgets, transceiver operating limits, and configuration sequencing. The large BGA package also requires thermal analysis based on actual logic utilization and core voltage rather than device capacity alone.
おすすめ
Programmable Test and Measurement
The LFE2-70E-7F672C can act as the central pattern generator, acquisition controller, and timing engine in programmable test equipment. Its 68,000 LUTs support sequencing and real-time analysis, 500 user I/O provide extensive channel and control connectivity, and 1,056,768 bits of block RAM support captured-data buffering. The -7 grade is beneficial for high-rate parallel test paths and short timing margins. Instrument-grade designs must add calibration, trigger synchronization, error checking, and safe state initialization around the FPGA. Do not infer analog accuracy from the digital specifications; validate the complete measurement chain, including drivers, references, analog front ends, and signal integrity. The 672-ball package provides the required pin density but demands careful escape routing and multilayer power planning.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LFE2-70E-7F672C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LFE2-70E-7FN672C | LFE2-70E-6F672C | LFE2-70E-5F672C | LFE2-70SE-6FN672C | LFE2-70E-6FN672I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 672-BBGA (27 x 27 mm) | 672-BBGA - same | 672-BBGA - same | 672-BBGA - same | 672-BBGA - same | 672-BBGA - same |
| Speed Grade | -7 | -7 | -6 | -5 | -6 | -6 |
| Ordering Suffix | 7F672C | 7FN672C lead-free ordering variant | 6F672C | 5F672C | SE6FN672C | 6FN672I |
主な差別化要因
- Higher speed grade within the same ECP2 672-ball family (vs LFE2-70E-6F672C)
- Closest documented ordering variant retains the major device resources (vs LFE2-70E-7FN672C)
- Commercial-temperature positioning with the -7 performance grade (vs LFE2-70E-6FN672I)
設計ノート
Use the manufacturer power-supply and decoupling recommendations rather than treating all 672 balls as interchangeable. Place the required input, output, and bypass capacitors adjacent to their associated supply balls, and provide uninterrupted power and ground planes beneath the device. Keep sensitive configuration and clock supplies away from high-current outputs. Validate the completed rail sequence at startup and during configuration because an inadequately sequenced supply can prevent reliable operation even when steady-state voltages appear correct.
The 672-ball, 27 x 27 mm fine-pitch BGA requires an escape-routing strategy based on the manufacturer land pattern. Assign pins before fixing the board stack-up so high-speed interfaces can use appropriate layers without excessive vias. Maintain continuous reference planes beneath high-speed routes, avoid right-angle turns, and apply the fabrication vendor's spacing and via-in-pad rules. A full unrouted design-rule check and density review should be completed before releasing the PCB.
Estimate thermal dissipation from the selected logic, RAM, I/O, and I/O-standard switching activity rather than from the FPGA's maximum capacity. Core power is only part of the total, because active I/O can add substantial power. Use the manufacturer's power-estimation guidance and package thermal data, then verify the design in system with representative workloads. A 672-ball package offers many power and ground connections, but their effectiveness depends on via-array geometry, plane continuity, copper layers, airflow, and the temperature rise of the assembled board.
Do not replace the -7 device with a -6 or -5 ordering code solely because the package name matches. Re-run timing analysis at the replacement speed grade and verify every affected interface, clock domain, and memory timing requirement. Also confirm configuration startup behavior, dedicated-pin assignments, supported I/O standards, and the exact land pattern. The suffix can encode speed, temperature, finish, and package-related ordering distinctions that are not interchangeable without validation.
コンプライアンス情報
The FN suffix appears in the lead-free ordering variant, but formal RoHS, REACH, halogen-free, and conflict-minerals status was not established from the cited product information. AEC-Q100 does not apply to this commercial FPGA category.