LFE2-70E-7F672C - 68K LUT ECP2 FPGA, 500 I/O, 672-BBGA
MPN: LFE2-70E-7F672C ✓ 啟用中LFE2-70E-7F672C 概覽
An FPGA is a reconfigurable semiconductor in which the logic, memory, and interconnect are configured after fabrication. The ECP2 family combines programmable logic blocks and embedded block RAM with high-speed I/O, placing the device within the broader semiconductor and programmable-logic hierarchy. This makes the LFE2-70E-7F672C suitable when designers need flexible parallel interfaces, configurable data paths, or parallel processing without developing a custom ASIC.
The device provides 68,000 LUTs organized through approximately 8,500 logic-array blocks, together with 1,056,768 bits of block RAM. Its 500 user I/O pins support high-density board-level connectivity, while the -7 speed designation identifies its performance grade. A 1.2 V core operating point is typical of the ECP2 architecture, and the stated core-voltage range is 1.14 V to 1.26 V.
The ECP2 architecture supports parallel programmable logic and dedicated memory resources for control logic, packet handling, fixed-function acceleration, and signal conditioning. Because the routing and configuration are programmable, one board design can support multiple product variants through different bitstreams. Engineers must still account for pin constraints, configuration requirements, interface timing, and banking rules when assigning resources.
Typical applications include industrial automation controllers, networking equipment, video and display processing, communications infrastructure, embedded test systems, and consumer electronics with extensive parallel I/O. The 500-I/O count is especially useful where an application needs numerous data buses, control signals, high-speed memory interfaces, or multiple external peripherals connected to one FPGA.
PCB implementation requires careful attention to the 672-ball fine-pitch footprint and its high I/O count. Follow the manufacturer package data and pinout tables for power, ground, configuration, clock, and user-I/O assignments. Maintain continuous power and ground planes, place decoupling capacitors close to the device, and route high-speed differential signals with controlled impedance to minimize signal-integrity problems.
This page combines device specifications, application guidance, package considerations, and a structured comparison with same-family Lattice options. These engineering details help distinguish exact-ordering variants from lower-speed or different-temperature alternatives and support faster component selection before PCB layout and configuration work begin.
直接替換替代品,適用於 LFE2-70E-7F672C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
LFE2-70E-7FN672C
✅ 直接替換📋 參考替代品(不在目錄中)
LFE2-70E-6F672C
✅ 直接替換聯絡詢價
查看資料表 →LFE2-70E-5F672C
✅ 直接替換聯絡詢價
查看資料表 →LFE2-70SE-6FN672C
✅ 直接替換📋 參考替代品(不在目錄中)
LFE2-70E-6FN672I
✅ 直接替換📋 參考替代品(不在目錄中)
LFE2-70E-7F672C 最大額定值與電氣特性
| Device Type | ECP2 field-programmable gate array (FPGA) |
| Logic Capacity | 68,000 LUTs |
| Logic Array Blocks | 8,500 LABs |
| Total Block RAM | 1,056,768 bits |
| User I/O Count | 500 I/O |
| Package Pin Count | 672 balls |
| 封裝 | 672-BBGA, 27 x 27 mm |
| Core Voltage | 1.2 V nominal |
| Core Voltage Range | 1.14 V to 1.26 V |
| Speed Grade | -7 |
| Technology | 90 nm |
| 工作溫度範圍 | 0°C to 85°C junction temperature |
| 安裝類型 | Surface mount |
| Device Family | LatticeECP2 |
LFE2-70E-7F672C 672-bbga, 27 x 27 mm 腳位配置指南
LFE2-70E-7F672C(672-bbga, 27 x 27 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LFE2-70E-7F672C.
請參閱 資料表 以查看完整腳位配置。
典型應用
LFE2-70E-7F672C 適用於 6 應用s: Industrial Automation Controller, Networking Packet Processing, Video and Display Interface, High-Speed Data Acquisition, Communication Equipment, Programmable Test and Measurement.
Industrial Automation Controller
The LFE2-70E-7F672C fits industrial automation controllers that combine sequencing, machine-state monitoring, and communication between sensors and actuators. Its 68,000 LUTs and 8,500 logic-array blocks can support control logic, protocol handling, and parallel datapaths, while 500 user I/O reduce the need for external I/O expanders. The -7 speed grade provides additional timing margin for demanding control loops and high-speed field-bus interfaces. The 672-ball package also allows a reusable platform for multiple machine variants without changing the FPGA pin assignment. Before schematic release, assign voltage banks, dedicated clock pins, configuration pins, and high-current outputs according to the manufacturer pinout and power guidelines.
推薦
Networking Packet Processing
The LFE2-70E-7F672C is suitable for networking equipment requiring parallel packet classification, buffering, traffic control, and status reporting. The FPGA offers 68,000 LUTs for protocol and finite-state-machine logic, 1,056,768 bits of block RAM for packet storage, and 500 user I/O for external interfaces and management signals. Its -7 speed grade is useful when the design contains timing-critical control paths, although line-rate validation must include the selected transceiver, clocks, PCB channels, and external PHY. The 27 x 27 mm 672-ball footprint makes it practical for dense line cards, but its fine-pitch routing and high I/O count require careful stack-up planning and continuous power distribution.
推薦
Video and Display Interface
The LFE2-70E-7F672C can implement video timing, pixel routing, overlay composition, and interface conversion because it combines 68,000 LUTs with 500 user I/O. Parallel video interfaces benefit from the large I/O count, while block RAM supports line buffers, frame storage, and pipeline stages. The -7 speed grade provides a useful margin for wide parallel data paths, although pixel-clock rate, synchronization polarity, and output timing must be checked against the target display specification. Because the device is not a fixed-function display controller, the design also needs explicit timing generators, color-space handling, and initialization sequence in the FPGA configuration. Board planning should separate high-speed display routing from slower control signals and preserve solid ground references.
推薦
High-Speed Data Acquisition
The LFE2-70E-7F672C is appropriate for instrumentation and data-acquisition systems requiring numerous parallel sensor inputs, digital conversion outputs, timing capture, and real-time filtering. Its 500 user I/O can connect multiple converters and interface blocks, while 68,000 LUTs and 1,056,768 bits of block RAM support parallel sample pipelines and local buffering. The -7 performance grade helps close timing on wide synchronous datapaths, but acquisition accuracy remains dependent on converter timing, clock jitter, voltage thresholds, and analog layout. Use the manufacturer I/O standards to select compatible banks and verify whether differential or single-ended operation is required. Configuration storage and clock-distribution design should be completed before committing to the 672-ball PCB footprint.
推薦
Communication Equipment
The LFE2-70E-7F672C suits communication equipment that needs configurable framing, channel processing, clock recovery support, and management logic. The 68,000 LUTs enable parallel protocol engines and finite-state machines, while 1,056,768 bits of block RAM accommodate payload buffering and test patterns. Its 500 user I/O provide access to parallel data buses, status signals, and external transceivers. The -7 speed grade offers additional timing margin over -6 and -5 alternatives when interfaces operate at demanding clock rates. Engineering validation should include signal-integrity analysis, clock-jitter budgets, transceiver operating limits, and configuration sequencing. The large BGA package also requires thermal analysis based on actual logic utilization and core voltage rather than device capacity alone.
推薦
Programmable Test and Measurement
The LFE2-70E-7F672C can act as the central pattern generator, acquisition controller, and timing engine in programmable test equipment. Its 68,000 LUTs support sequencing and real-time analysis, 500 user I/O provide extensive channel and control connectivity, and 1,056,768 bits of block RAM support captured-data buffering. The -7 grade is beneficial for high-rate parallel test paths and short timing margins. Instrument-grade designs must add calibration, trigger synchronization, error checking, and safe state initialization around the FPGA. Do not infer analog accuracy from the digital specifications; validate the complete measurement chain, including drivers, references, analog front ends, and signal integrity. The 672-ball package provides the required pin density but demands careful escape routing and multilayer power planning.
推薦
推薦產品摘要
工程參考資料,適用於 LFE2-70E-7F672C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LFE2-70E-7FN672C | LFE2-70E-6F672C | LFE2-70E-5F672C | LFE2-70SE-6FN672C | LFE2-70E-6FN672I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 672-BBGA (27 x 27 mm) | 672-BBGA - same | 672-BBGA - same | 672-BBGA - same | 672-BBGA - same | 672-BBGA - same |
| Speed Grade | -7 | -7 | -6 | -5 | -6 | -6 |
| Ordering Suffix | 7F672C | 7FN672C lead-free ordering variant | 6F672C | 5F672C | SE6FN672C | 6FN672I |
主要差異化特點
- Higher speed grade within the same ECP2 672-ball family (對比LFE2-70E-6F672C)
- Closest documented ordering variant retains the major device resources (對比LFE2-70E-7FN672C)
- Commercial-temperature positioning with the -7 performance grade (對比LFE2-70E-6FN672I)
設計說明
Use the manufacturer power-supply and decoupling recommendations rather than treating all 672 balls as interchangeable. Place the required input, output, and bypass capacitors adjacent to their associated supply balls, and provide uninterrupted power and ground planes beneath the device. Keep sensitive configuration and clock supplies away from high-current outputs. Validate the completed rail sequence at startup and during configuration because an inadequately sequenced supply can prevent reliable operation even when steady-state voltages appear correct.
The 672-ball, 27 x 27 mm fine-pitch BGA requires an escape-routing strategy based on the manufacturer land pattern. Assign pins before fixing the board stack-up so high-speed interfaces can use appropriate layers without excessive vias. Maintain continuous reference planes beneath high-speed routes, avoid right-angle turns, and apply the fabrication vendor's spacing and via-in-pad rules. A full unrouted design-rule check and density review should be completed before releasing the PCB.
Estimate thermal dissipation from the selected logic, RAM, I/O, and I/O-standard switching activity rather than from the FPGA's maximum capacity. Core power is only part of the total, because active I/O can add substantial power. Use the manufacturer's power-estimation guidance and package thermal data, then verify the design in system with representative workloads. A 672-ball package offers many power and ground connections, but their effectiveness depends on via-array geometry, plane continuity, copper layers, airflow, and the temperature rise of the assembled board.
Do not replace the -7 device with a -6 or -5 ordering code solely because the package name matches. Re-run timing analysis at the replacement speed grade and verify every affected interface, clock domain, and memory timing requirement. Also confirm configuration startup behavior, dedicated-pin assignments, supported I/O standards, and the exact land pattern. The suffix can encode speed, temperature, finish, and package-related ordering distinctions that are not interchangeable without validation.
合規資訊
The FN suffix appears in the lead-free ordering variant, but formal RoHS, REACH, halogen-free, and conflict-minerals status was not established from the cited product information. AEC-Q100 does not apply to this commercial FPGA category.