LM235 - Precision Temperature Sensor | STMicroelectronics | Industrial
部品番号: LM235 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0.85 | $0.85 |
| 10 | $0.76 | $7.60 |
| 100 | $0.68 | $68.00 |
| 500 | $0.61 | $305.00 |
| 1,000 | $0.55 | $550.00 |
LM235 概要
A temperature sensor is a device that converts thermal energy into an electrical signal, typically a voltage or current, that can be measured and processed. The LM235 belongs to the family of analog temperature sensors, which are widely used in environmental monitoring, industrial control, and consumer electronics. These sensors are essential in systems that require temperature compensation, thermal protection, or precise temperature measurement.
Key features of the LM235 include a wide operating voltage range of 4V to 30V, low self-heating of 0.1°C in still air, and a linear output of 10 mV/°C. The device also features a typical accuracy of ±1°C at 25°C and ±2°C over the full temperature range. Its low output impedance and ability to drive capacitive loads make it easy to interface with analog-to-digital converters (ADCs) and microcontrollers.
The LM235 uses a bandgap reference circuit to generate a voltage proportional to temperature, ensuring stable and repeatable performance. The output voltage is calibrated at the factory, eliminating the need for external trimming in most applications. The device operates from a single supply and can be used in both single-ended and differential configurations.
Typical applications include temperature monitoring in industrial process control, thermal management in power supplies, battery temperature sensing in portable devices, and environmental monitoring in HVAC systems. The LM235 is also used in automotive applications for engine temperature sensing and cabin climate control.
When designing with the LM235, ensure that the supply voltage is within the specified range and that the output is properly buffered if driving a low-impedance load. The device's low self-heating minimizes measurement errors, but for high-accuracy applications, consider using a heat sink or mounting the sensor away from heat sources.
ドロップイン代替品: LM235 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
LM335
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
LM135
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
LM235Z
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MCP9700
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TMP36
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
LM235 最大定格＆電気的特性
| 出力タイプ | Analog Voltage |
| Temperature Range | -40°C to +125°C |
| Output Voltage at 25°C | 2.98V (typical) |
| Temperature Coefficient | 10 mV/°C |
| Accuracy at 25°C | ±1°C (typical) |
| Accuracy over Full Range | ±2°C (typical) |
| Supply Voltage Range | 4V to 30V |
| 電源電流 | 80 µA (typical) |
| Self-Heating | 0.1°C in still air |
| Output Impedance | 0.1 Ω (typical) |
| パッケージ | TO-92 |
| 実装タイプ | Through Hole |
| 動作温度 | -40°C to +125°C |
| RoHS ステータス | Compliant |
| Lead-Free | Yes |
LM235 ピン構成
| ピン 1 | V+ — Positive supply voltage (4V to 30V) |
| ピン 2 | V- — Ground or negative supply |
| ピン 3 | VOUT — Temperature-dependent output voltage (10 mV/°C) |
主な用途
LM235 の用途: 6 件s: Industrial Process Control, HVAC Systems, Automotive Engine Temperature Sensing, Battery Temperature Monitoring, Environmental Monitoring, Medical Equipment.
Industrial Process Control
The LM235 is used in industrial process control systems to monitor and regulate temperature in manufacturing processes. Its wide temperature range and accuracy ensure reliable operation in harsh environments. The sensor's linear output simplifies interfacing with ADCs and microcontrollers, enabling precise temperature feedback for control loops. In a typical application, the LM235 is placed in a thermowell or directly in the process medium, and its output is fed to a PLC or microcontroller that adjusts heating or cooling elements. The low self-heating of 0.1°C minimizes measurement errors, ensuring accurate process control. The device's wide supply voltage range of 4V to 30V allows it to be powered from existing industrial power rails without additional regulation.
おすすめ
HVAC Systems
The LM235 is widely used in HVAC (Heating, Ventilation, and Air Conditioning) systems for temperature monitoring and control. Its accuracy of ±1°C at 25°C ensures comfortable indoor climates. The sensor's low cost and ease of use make it ideal for mass-produced thermostats and climate control units. In a typical HVAC application, the LM235 is mounted in the return air duct or near the thermostat, and its output is read by a microcontroller that controls the compressor and fan. The device's low self-heating prevents false readings, and its wide supply voltage range allows direct connection to the system's power supply. The linear output simplifies calibration and reduces the need for external components.
おすすめ
Automotive Engine Temperature Sensing
The LM235 is used in automotive applications for engine temperature sensing and thermal protection. Its wide temperature range of -40°C to +125°C covers the extremes of engine operation. The sensor's accuracy ensures reliable engine management, preventing overheating and optimizing fuel efficiency. In a typical automotive application, the LM235 is mounted in the engine block or coolant line, and its output is fed to the engine control unit (ECU). The ECU uses the temperature reading to adjust fuel injection, ignition timing, and cooling fan operation. The device's low self-heating and robust construction make it suitable for the harsh automotive environment. The wide supply voltage range allows direct connection to the vehicle's 12V electrical system.
おすすめ
Battery Temperature Monitoring
The LM235 is used in battery management systems to monitor battery temperature and prevent thermal runaway. Its low self-heating of 0.1°C ensures accurate temperature readings without affecting the battery. The sensor's small size and low cost make it ideal for integration into battery packs. In a typical application, the LM235 is attached to the battery cell or module, and its output is read by a battery management IC or microcontroller. The system can then adjust charging current or activate cooling mechanisms based on the temperature. The device's wide supply voltage range allows it to be powered from the battery itself, simplifying the design. The linear output makes it easy to calibrate and interface with ADCs.
おすすめ
Environmental Monitoring
The LM235 is used in environmental monitoring systems to measure ambient temperature in weather stations, greenhouses, and data centers. Its accuracy and wide temperature range make it suitable for outdoor and indoor monitoring. The sensor's low power consumption of 80 µA is ideal for battery-powered applications. In a typical application, the LM235 is placed in a weatherproof enclosure, and its output is logged by a data logger or transmitted wirelessly. The device's low self-heating ensures accurate readings even in still air. The wide supply voltage range allows it to be powered from solar panels or batteries. The linear output simplifies data processing and reduces the need for complex calibration.
おすすめ
Medical Equipment
The LM235 is used in medical equipment for temperature monitoring in incubators, patient monitoring systems, and laboratory equipment. Its accuracy and reliability are critical for patient safety. The sensor's low self-heating and wide temperature range make it suitable for medical applications. In a typical application, the LM235 is used to monitor the temperature of a patient or a medical device, and its output is read by a microcontroller that displays the temperature or triggers alarms. The device's low power consumption is ideal for portable medical devices. The wide supply voltage range allows it to be powered from batteries or medical-grade power supplies. The linear output simplifies calibration and ensures accurate readings.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LM235 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LM335 | LM135 | LM235Z | MCP9700 | TMP36 |
|---|---|---|---|---|---|---|
| Package | TO-92 | TO-92 | TO-92 | TO-92 | TO-92 | TO-92 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | Microchip Technology | Analog Devices |
| Temperature Range | -40°C to +125°C | -40°C to +100°C | -55°C to +150°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
| Output Voltage at 25°C | 2.98V | 2.98V | 2.98V | 2.98V | 0.5V | 0.75V |
| Temperature Coefficient | 10 mV/°C | 10 mV/°C | 10 mV/°C | 10 mV/°C | 10 mV/°C | 10 mV/°C |
| Accuracy at 25°C | ±1°C | ±1°C | ±1°C | ±1°C | ±2°C | ±2°C |
| Supply Voltage Range | 4V to 30V | 4V to 30V | 4V to 30V | 4V to 30V | 2.3V to 5.5V | 2.7V to 5.5V |
| Supply Current | 80 µA | 80 µA | 80 µA | 80 µA | 6 µA | 50 µA |
主な差別化要因
- Wider temperature range than LM335 （vs LM335)
- Higher accuracy than MCP9700 （vs MCP9700)
- Wider supply voltage range than TMP36 （vs TMP36)
設計ノート
Place the LM235 away from heat sources on the PCB to minimize measurement errors. Use a ground plane to reduce noise and ensure stable operation. Keep the sensor's leads short to avoid thermal coupling.
The LM235 has a self-heating of 0.1°C in still air. For high-accuracy applications, consider mounting the sensor on a heat sink or in a thermally conductive enclosure to dissipate heat. Avoid placing the sensor near power components that generate heat.
Ensure the supply voltage is within the specified range of 4V to 30V. Exceeding the maximum voltage can damage the device. Also, avoid loading the output with a low-impedance load, as this can affect accuracy. Use a buffer amplifier if driving a low-impedance load.
コンプライアンス情報
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified.
