LM239QT - Low-Power Quad Comparator | STMicroelectronics
部品番号: LM239QT ✓ 生産中LM239QT 概要
A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. This is the basic role of the LM239QT within the wider semiconductor and analog IC hierarchy: comparator → analog comparator → signal-conditioning IC → semiconductor. Its four independent channels allow multiple threshold, window, or protection decisions within one package.
The principal characteristics include a supply current of 1.1 mA and a typical low input bias current of 25 nA. These values suit battery-operated and low-power monitoring systems where comparator current and input loading influence the overall power budget. The open-collector outputs can also interface with wired logic systems, although pull-up components are required for normal high-level output operation.
Each comparator channel has independent inputs and an independently controlled open-collector output. Operation from split power supplies allows the input common-mode range to be positioned around ground in bipolar systems, while single-supply operation supports battery and rail-referenced sensing. The device family is intended for general-purpose precision comparison rather than high-speed comparator applications.
Typical uses include battery-cell threshold monitoring, power-supply sequencing, sensor signal conditioning, overvoltage and undervoltage detection, industrial control thresholds, and portable instrumentation. The four-channel architecture can reduce package count when a system needs several independent decisions, while keeping input bias and supply demand low.
PCB design should provide a short, low-impedance ground return and place decoupling capacitance close to the supply pins. Because open-collector outputs require an external pull-up, calculate its resistance against the output sink current and propagation-delay requirements. Do not assume that the output enters a valid logic-high state before the pull-up network is installed.
This product page organizes the LM239QT specifications, qualified alternatives, application guidance, comparison parameters, and design considerations into a practical engineering reference. Use the manufacturer datasheet for the authoritative pin description, ordering information, absolute maximum ratings, and electrical test conditions.
ドロップイン代替品: LM239QT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
LM239AQT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
LM239QT 最大定格&電気的特性
| Comparator Count | 4 independent comparators |
| Comparator Type | Low-power precision voltage comparator |
| Supply Configuration | Single supply or split supply |
| Maximum Supply Voltage | ±18 V |
| 電源電流 | 1.1 mA |
| Input Bias Current | 25 nA typical |
| Logic Output | Open-collector |
| Output Interface Compatibility | TTL, MOS, CMOS, DTL, and ECL |
| 動作温度範囲 | -40°C to +105°C |
| パッケージ | 16-QFN, 3 x 3 mm, 0.50 mm pitch |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
LM239QT 16-qfn, 3 x 3 mm, 0.50 mm pitch ピン配置ガイド
LM239QT (16-qfn, 3 x 3 mm, 0.50 mm pitch パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: LM239QT.
詳細は データシート をご参照ください。
主な用途
LM239QT の用途: 6 件s: Battery Threshold Monitoring, Power-Supply Sequencing, Industrial Sensor Conditioning, Portable Instrument Protection, Sensor Signal Switching, Automotive Electrical Monitoring.
Battery Threshold Monitoring
The LM239QT is suitable for monitoring several battery-related thresholds because it combines four independent comparators with a supply current of 1.1 mA and a typical input bias current of 25 nA. Multiple channels can indicate charge, discharge, or overvoltage events without requiring four separate packages. The low input loading helps preserve accuracy when the source impedance is high. Because the outputs are open-collector, use a suitable pull-up on each node and account for the resulting logic rise time. The device can also operate from split supplies, which is useful when sensing battery rails around ground.
おすすめ
Power-Supply Sequencing
The LM239QT can monitor several supply rails in a sequencing or fault-detection circuit by assigning one of its four comparator channels to each threshold. Its single- and split-supply operating capability supports both rail-referenced and ground-centered designs, while the open-collector outputs can pull wired-enable or fault lines low. External pull-ups establish the inactive-high state and should be selected according to sink-current and timing requirements. Because response speed and output propagation delay are not stated in the product source, timing-critical sequencing loops must be checked against the manufacturer electrical characteristics.
おすすめ
Industrial Sensor Conditioning
The LM239QT is appropriate for industrial sensor interfaces that require converting a slowly varying analog level into a logic decision. Its typical 25 nA input bias current minimizes loading of high-impedance sensor networks, and the 1.1 mA supply current supports low-power sensing nodes. Four independent channels can handle upper and lower limits, alarm points, or multiple sensor inputs within one package. Keep comparator traces away from switching nodes, provide a low-impedance ground return, and use the open-collector outputs with pull-up networks matched to the digital receiver.
おすすめ
Portable Instrument Protection
The LM239QT can implement overvoltage, undervoltage, and other protective decisions in portable measurement equipment. Its low 1.1 mA supply current reduces continuous overhead, and the compact 16-QFN package preserves board area in handheld systems. The four channels may monitor different rails or independent sensor limits, with open-collector outputs driving enable, shutdown, or fault inputs. Because the device is not optimized as a high-speed comparator, it is better suited to slow protection thresholds than to waveform timing or zero-crossing detection.
おすすめ
Sensor Signal Switching
The LM239QT can compare a sensor-derived voltage against a reference and control whether an analog signal path is enabled or disabled. The low typical input bias of 25 nA is valuable when the divider or sensor output has high impedance, while split-supply operation allows sensing signals around 0 V. Each open-collector channel requires a pull-up and should not be assumed to source current. PCB placement should keep the comparator input path compact and route the pull-up return current away from sensitive analog nodes to reduce switching-related disturbance.
おすすめ
Automotive Electrical Monitoring
The LM239QT can be evaluated for non-safety-critical electrical monitoring functions such as rail-state detection or diagnostic thresholding in automotive systems. Its wide supply capability, split-supply operation, and four independent channels make it adaptable to multi-rail test circuits. However, the manufacturer source does not identify this ordering code as AEC-Q100 qualified, so it should not be treated as an automotive-qualified substitute without separate qualification. Any deployment also requires review of transient immunity, output timing, and temperature-specific limits in the authoritative datasheet.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LM239QT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LM239AQT |
|---|---|---|
| Package | 16-QFN (3x3) | 16-QFN (3x3) |
| Brand | STMicroelectronics | STMicroelectronics |
| Comparator Count | 4 independent comparators | 4 independent comparators |
| Supply Current | 1.1 mA | 1.1 mA |
| Input Bias Current | 25 nA typical | 25 nA typical |
| Maximum Supply Voltage | ±18 V | ±18 V |
| Logic Output | Open-collector | Open-collector |
主な差別化要因
- Four independent precision comparison channels in one compact package (vs TS972IQT)
- Low typical input bias current for high-impedance sensing (vs TS972IQT)
- Single- and split-supply operating capability (vs LM239AQT)
- Open-collector output supports wired-interface integration (vs TS972IQT)
設計ノート
Place the LM239QT decoupling capacitor as close as practical to the supply and ground pins, and provide a low-impedance ground plane connection. The 16-QFN uses a 0.50 mm pitch, so verify the PCB land pattern, pin-1 orientation, and exposed-pad connection against the manufacturer package drawing before release. Keep comparator input traces short and route them away from switching-node copper to reduce displacement current and false threshold transitions.
Design each open-collector output with an external pull-up resistor. Select the resistance using the minimum required high-level current, the output transistor's allowed sink current, the receiver's input-current requirement, and the maximum permitted rise time. The pull-up also forms a capacitive discharge path with PCB and wiring capacitance, so a faster edge generally requires a lower resistance while increasing static current when the output is low.
Do not assign the 2 mV maximum offset figure to the standard LM239QT; the manufacturer identifies that value specifically for LM239A and related A-version devices. Compare the standard and A versions using their own complete electrical tables. Also avoid assuming that an open-collector output can source a logic-high signal, and confirm common-mode limits, output timing, and absolute maximum ratings before finalizing the analog input network.
For high-impedance sensors, minimize leakage through the divider and input nodes because the typical input bias current is 25 nA. Guard or shield sensitive inputs where practical, clean connector and PCB surfaces, and keep the pull-up current path separate from the analog return. When an input crosses a threshold rapidly, account for propagation delay and output rise time instead of assuming an instantaneous decision.
コンプライアンス情報
RoHS-compliant construction is identified in the product source. The other compliance attributes are not stated and remain unknown.