STMicroelectronics

LM258AYDT - Dual 1.1MHz Low-Power Op Amp | STMicroelectronics

部品番号: LM258AYDT ✓ 生産中
8-SOIC Package
MOQ: 1 |

LM258AYDT 概要

STMicroelectronics LM258AYDT is a dual, general-purpose operational amplifier with a 1.1 MHz gain-bandwidth product and low-power characteristics, supplied in an 8-pin SOIC package. The device contains two independent amplifiers, making it suitable for signal conditioning, feedback control, filtering, sensing, and general dual-amplifier signal paths.

An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between signals applied to its inverting and non-inverting inputs. The LM258AYDT belongs to the operational-amplifier hierarchy, combining low-power operation, dual-channel integration, and an 8-pin SOIC footprint in a component intended for cost-sensitive analog signal-chain designs.

Key characteristics include two amplifier circuits in one package, a 1.1 MHz gain-bandwidth product, and low-power operation. The integrated dual configuration reduces external component count and PCB area when a design requires two matched-function amplifier channels. Its standard SOIC-8 package also supports conventional surface-mount assembly and hand-soldering or automated placement.

The amplifier architecture is suited to closed-loop configurations in which feedback defines the gain and bandwidth. Designers must maintain the input common-mode voltage and output-voltage limits published by STMicroelectronics, because operation outside those limits can impair signal integrity or reduce reliability. Input and output stability should be evaluated using the manufacturer’s recommended source, load, and bypass-capacitor arrangements.

Typical uses include industrial sensor interfaces, audio preamplifier stages, loop filters, sensor-conditioning channels, and low-frequency control or measurement circuits. Two amplifiers can implement differential, instrumentation-style signal handling, cascaded gain stages, active filters, or independent channels where board area is constrained.

For PCB implementation, place decoupling capacitors close to the supply pins and route sensitive input and feedback paths away from high-current switching nodes. Check input bias-current effects, output swing, stability with the selected load, and the operating-temperature range before committing the design to production.

This product page combines package, technical, replacement, and application guidance with practical design considerations. It also identifies where pinout, compliance, and detailed electrical values must be confirmed against the manufacturer’s LM258AYDT datasheet before layout release or component substitution.

ドロップイン代替品: LM258AYDT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LM258AYDT (同一形状・フットプリント) — 相違点: Package, Slew Rate, Amplifier Type, Gain-Bandwidth Product, Product Type.

Texas Instruments
Package: 8-SOIC, 3.90 mm body width
Slew Rate: 0.3 V/µs
Amplifier Type: General-purpose operational amplifier
比較対象 LM258AYDT →
STMicroelectronics
Package: 8-pin SOIC
Slew Rate: 0.6 V/us
Amplifier Type: Dual low-power operational amplifier
比較対象 LM258AYDT →
STMicroelectronics
Slew Rate: 0.6 V/us
Product Type: Dual operational amplifier
比較対象 LM258AYDT →

LM258AYD

✅ ドロップイン
📦 8-SOIC
Same-family device with reported identical terminals and package; exact ordering-code and temperature-grade differences require datasheet confirmation.

📋 参考代替品(カタログ未掲載)

LM258DT

✅ ドロップイン
STMicroelectronics
📦 8-SOIC
Dual low-power operational amplifier · 2 amplifiers · 2 circuits · 3 V to 30 V · 1.1 MHz · 0.6 V/us · 100 dB · 500 uA

価格はお問い合わせください

データシートを見る →

TSH22IDT

✅ ドロップイン
📦 8-SOIC
Cross-family SO8 candidate with expected standard dual-op-amp pin compatibility; exact bandwidth and voltage-limit deltas require comparison.

📋 参考代替品(カタログ未掲載)

TSB7192IDT

✅ ドロップイン
📦 8-SOIC
Cross-family SO8 candidate with expected standard dual-op-amp pin compatibility; exact bandwidth and voltage-limit deltas require comparison.

📋 参考代替品(カタログ未掲載)

LM258AYDT 最大定格&電気的特性

Product Type Dual general-purpose operational amplifier
Number of Amplifier Circuits 2 circuits
Gain-Bandwidth Product 1.1 MHz
パッケージ 8-SOIC
Package Width 3.90 mm
Lead Pitch 0.154 inch
実装タイプ Surface mount
Power Class Low-power dual operational amplifier

LM258AYDT 3.90 mm ピン配置ガイド

LM258AYDT (3.90 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

LM258AYDT の 3.90 mm パッケージピン配置図

詳細なピン配置データはありません: LM258AYDT.

詳細は データシート をご参照ください。

主な用途

LM258AYDT の用途: 6 件s: Industrial Sensor Signal Conditioning, Audio Preamplifier Stages, Active Loop Filters, Power Supply Current Monitoring, Portable Instrumentation, Control Loop Amplification.

🏭

Industrial Sensor Signal Conditioning

The LM258AYDT suits low-frequency industrial sensor interfaces because it combines two amplifier channels with a 1.1 MHz gain-bandwidth product in an 8-SOIC package. One channel can amplify the sensor output while the other provides active filtering, buffering, or an instrumentation-style feedback path. Its low-power dual architecture reduces the number of analog packages and board area compared with two separate single amplifiers. Designers should establish the sensor excitation level, expected common-mode voltage, source impedance, and required noise bandwidth before selecting resistor and capacitor values. Protection, filtering, and grounding remain important when the input originates from long cables or noisy process equipment.

🎧

Audio Preamplifier Stages

The LM258AYDT can implement low-frequency audio preamplification, equalization, or active filtering when the signal bandwidth remains below its 1.1 MHz gain-bandwidth product. Its two amplifier channels can be assigned to separate stages or arranged as a non-inverting amplifier followed by an output buffer. This dual arrangement can simplify the layout of small audio modules while reducing package count. The amplifier is intended for general-purpose operation rather than low-noise headphone drive, so the design should verify input-referred noise, output swing, distortion, and load compatibility against the manufacturer’s electrical characteristics. Bypass capacitors and feedback traces should be positioned to avoid adding instability or audible channel-to-channel coupling.

🔧

Active Loop Filters

The LM258AYDT is well suited to implementing active low-pass, high-pass, or band-pass networks in measurement and control circuits. Two independent amplifiers permit cascaded stages, a first-order filter followed by a buffer, or an integrated multiple-feedback topology. The 1.1 MHz gain-bandwidth product provides useful headroom for filters centered well below the megahertz range, although actual corner frequency and phase margin depend on the chosen topology. Resistor tolerances, capacitor tolerances, amplifier input bias current, and output loading must be included in tolerance analysis. Check the manufacturer’s recommended operating region and use PCB layouts that keep sensitive summing nodes compact and well separated from switching-current paths.

⚡

Power Supply Current Monitoring

The LM258AYDT can monitor a voltage-derived current signal in a low-frequency power-control system by amplifying the voltage across a sense resistor and filtering the result before an ADC input. The dual-channel configuration allows one amplifier to amplify the sense signal while the other buffers or actively filters it. Because the device has a 1.1 MHz gain-bandwidth product, it is best aligned with slowly changing current measurements rather than high-bandwidth power-converter ripple analysis. The sense-resistor value must balance signal amplitude against power loss, while the amplifier input must remain within its common-mode and supply limits. Layout should use Kelvin-style sensing where practical so copper drops do not distort the measurement.

📱

Portable Instrumentation

The LM258AYDT supports compact, battery-operated instrumentation because it provides two amplifier functions in one low-power 8-SOIC package. A portable front end can use one channel for transducer excitation and the other for measurement amplification, or use the channels for differential sensing and output buffering. The package’s small footprint supports board-space reduction, but the actual battery-life benefit depends on the selected feedback network, load, operating voltage, and system duty cycle. Designers should verify supply-current behavior over the complete input range and confirm that the input signal remains within the published common-mode limits. Local decoupling and controlled grounding are particularly important when the device operates alongside switching converters.

📡

Control Loop Amplification

The LM258AYDT can amplify error signals in low-bandwidth feedback-control circuits such as temperature, position, or light-intensity control. One channel may compare and amplify a setpoint error, while the second channel drives a feedback network or provides an additional control stage. Its 1.1 MHz gain-bandwidth product is suitable for many slow closed-loop systems, while the low-power dual format reduces analog component count. Compensation must be based on the actual plant impedance, crossover frequency, sensor lag, and load rather than nominal gain alone. Check output-current capability, slew rate, saturation recovery, and common-mode range for the selected operating point to avoid instability or delayed system response.

おすすめ製品の概要

LM258AYD Same-family dual op-amp candidate 使用用途: Industrial Sensor Signal Conditioning, Active Loop Filters, Power Supply Current Monitoring, Control Loop Amplification LM258DT STMicroelectronics 使用用途: Industrial Sensor Signal Conditioning, Active Loop Filters, Portable Instrumentation, Control Loop Amplification TSH22IDT SO8 dual op-amp candidate 使用用途: Audio Preamplifier Stages, Power Supply Current Monitoring TSB7192IDT SO8 dual op-amp candidate 使用用途: Audio Preamplifier Stages, Portable Instrumentation
What is the LM258AYDT?
The LM258AYDT is a low-power, dual general-purpose operational amplifier from STMicroelectronics, combining two amplifier circuits, a 1.1 MHz gain-bandwidth product, and an 8-pin SOIC package. According to the STMicroelectronics datasheet, the LM258AYDT is intended for general-purpose analog signal conditioning and can reduce board area when two amplifier functions are required in one component.
How many operational amplifiers are in the LM258AYDT?
The LM258AYDT contains two independent operational-amplifier circuits in one 8-SOIC package. The manufacturer describes it as a standard general-purpose, low-power dual operational amplifier. This arrangement is useful for cascaded stages, active filters, sensor interfaces, differential signal conditioning, or two unrelated low-frequency channels when minimizing component count and PCB area is important.
What is the gain-bandwidth product of LM258AYDT?
The LM258AYDT has a gain-bandwidth product of 1.1 MHz. According to STMicroelectronics’ LM258AYDT documentation, this makes the device suitable for general-purpose low-frequency amplification rather than high-speed signal processing. Actual closed-loop bandwidth also depends on the selected noise-gain configuration, feedback network, load, and operating conditions.
Where can I download the LM258AYDT datasheet PDF?
The LM258AYDT datasheet PDF is available through STMicroelectronics’ product documentation and through the linked Octopart datasheet page. The manufacturer document should be used to confirm the complete pin description, supply limits, electrical characteristics, recommended application circuit, and package information before assigning PCB connections or qualifying a replacement.
Where is the LM258AYDT pinout?
The LM258AYDT pinout is shown in the manufacturer datasheet under the pin-description or package-information section. The device uses an 8-SOIC outline, with two complete operational-amplifier channels. Use the datasheet pin table to verify the output, inverting input, non-inverting input, supply, and ground assignments before routing the board.
Can TSH22IDT replace the LM258AYDT?
TSH22IDT is a candidate SO8 replacement for the LM258AYDT, but final substitution requires pin-by-pin and specification verification. The available cross-reference information identifies it as a same-SO8, potentially pin-compatible dual op amp. Compare supply range, common-mode limits, output swing, offset, bandwidth, noise, and stability before treating it as a production-approved drop-in replacement.
Is LM258AYD a drop-in replacement for LM258AYDT?
LM258AYD is a same-manufacturer candidate for replacing LM258AYDT because its terminal arrangement and package are reported as consistent with the LM258AYDT. The parts also appear within the same LM258AY device family. Confirm the ordering information, temperature grade, package dimensions, and approved supplier configuration before using it as a drop-in replacement.
When should I choose LM258AYDT instead of LM258DT?
Choose LM258AYDT when the required ordering configuration and assembly process correspond to the YDT version, while LM258DT is acceptable for the target electrical specification and available package variant. Both are identified as SO8 dual general-purpose operational amplifiers. The decision should be based on exact suffix behavior, qualification requirements, availability, and manufacturer documentation rather than package similarity alone.
Is the LM258AYDT suitable for industrial sensor interfaces?
The LM258AYDT can be used in industrial sensor-interface circuits when the signal bandwidth, supply voltage, common-mode range, and output swing satisfy the sensor requirements. Its 1.1 MHz gain-bandwidth product is suitable for many low-frequency measurements, while the dual configuration can support a differential input stage. Input filtering and protection remain necessary for noisy industrial environments.
What are the key specifications of LM258AYDT that engineers should know?
The principal LM258AYDT specifications are dual amplification, a 1.1 MHz gain-bandwidth product, low-power operation, and an 8-SOIC package. STMicroelectronics classifies the device as a standard general-purpose amplifier. Supply limits, input offset, bias current, slew rate, common-mode range, output swing, and temperature ratings must be taken from the manufacturer datasheet for the exact ordering configuration.
How do I decouple the LM258AYDT power supply?
Place the supply-bypass capacitor immediately beside the LM258AYDT supply and ground pins, with a short, low-inductance return path to the device. Follow the manufacturer’s recommended decoupling arrangement for the application. Good placement suppresses supply impedance and reduces the possibility that feedback-loop phase margin will be degraded by trace or capacitor ESR.
What is the best drop-in replacement for LM258AYDT?
No single universally approved replacement can be selected without defining the required electrical limits, temperature grade, qualification status, and sourcing constraints. LM258AYD, LM258DT, TSH22IDT, and TSB7192IDT are documented SO8 candidates, but each requires pinout and parameter review. The safest choice is the part whose ordering code and manufacturer characteristics match the original requirements exactly.
What can replace LM258AYDT?
LM258AYD is the closest same-family candidate because its package and terminals are reported as consistent with the LM258AYDT. TSH22IDT and TSB7192IDT are possible SO8 substitutes, while LM258DT is another same-family option. None should be installed solely from the package name; verify every pin, voltage limit, current capability, and stability condition in the applicable datasheets.
Where can I buy LM258AYDT online?
Use the Request a Quote form on this page to request LM258AYDT availability, current commercial terms, and the appropriate package quantity. The form is the appropriate route for a quote because component pricing and inventory can change by order quantity, date, and packaging requirement. Provide the target quantity, date code preference, and inspection requirements with the request.
What is the lead time for LM258AYDT?
Lead time for LM258AYDT depends on order quantity, current factory and distribution status, package configuration, and any traceability requirements. Request the current lead time through the Request a Quote form on this page. Include the required quantity and target delivery date so the supplier can confirm the most appropriate supply route.
Is LM258AYDT in stock?
LM258AYDT availability changes with market demand and purchasing volume, so current stock should be confirmed through the Request a Quote form on this page. Provide the quantity, packaging format, and required ship-to location. For production planning, ask for the confirmed factory lead time as well as any locally held inventory.

エンジニアリング参考データ: LM258AYDT — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the LM258AYDT for a new low-frequency dual-amplifier design that requires two general-purpose op-amp channels, a 1.1 MHz gain-bandwidth product, low-power operation, and an 8-SOIC footprint. LM258AYD is the closest same-family candidate when its exact ordering code and grade meet the requirements, while LM258DT offers another same-family SO8 option. TSH22IDT and TSB7192IDT should be considered when a different STMicroelectronics amplifier family provides the necessary electrical characteristics, but their bandwidth, voltage limits, offset, noise, and pin behavior must be checked against the original device. For production substitution, verify the exact manufacturer pin table, supply range, common-mode limits, output swing, temperature grade, and stability behavior rather than relying on the SO8 package alone.

代替品との比較

パラメータ この製品 LM258AYD LM258DT TSH22IDT TSB7192IDT
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Channels 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Product Classification Standard general-purpose amplifier General-purpose dual operational amplifier General-purpose dual operational amplifier Dual operational amplifier Dual operational amplifier
Drop-In Relationship Original device Same-family candidate with consistent terminals and package Same-family SO8 candidate Expected pin-compatible SO8 candidate Expected pin-compatible SO8 candidate

主な差別化要因

  • Two general-purpose amplifier channels in one package (vs LM258DT)
  • Documented 1.1 MHz gain-bandwidth product (vs TSH22IDT)
  • Established same-family ordering lineage (vs TSB7192IDT)

設計ノート

Place the supply-bypass capacitor adjacent to the LM258AYDT supply and ground pins, and use the shortest practical connection to the device. Keep the feedback loop compact, particularly around inverting inputs, because parasitic resistance and capacitance can alter loop gain and phase margin. Route input and feedback nets away from switching nodes and high-current return paths to reduce common-mode pickup and instability.

Do not assume that any SO8 dual op amp is interchangeable with the LM258AYDT. Before substitution, compare every pin, the supply range, input common-mode range, output swing, input offset, input bias current, output-current capability, slew rate, noise, and stability behavior. Pay particular attention to automotive or industrial temperature requirements, because an apparently identical package does not imply identical qualification.

For sensor and low-level input stages, evaluate source impedance against input bias current and capacitive loading before choosing feedback resistors. Very high resistance values can create leakage-induced offset and noise, while very low values can increase output-current demand and power consumption. Use short guarded traces, clean ground returns, and a defined low-pass network to balance bandwidth against unwanted high-frequency noise.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance status was not stated for the exact LM258AYDT ordering code and must be confirmed from the manufacturer product documentation.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

LM258AYDT datasheet LM258AYDT pinout LM258AYDT datasheet pdf STMicroelectronics LM258AYDT LM258AYDT equivalent LM258AYDT replacement LM258AYDT cross reference LM258AYDT vs LM258DT LM258AYDT SO8 footprint LM258AYDT application circuit LM258AYDT price LM258AYDT stock LM258AYDT 1.1MHz dual op amp LM258AYDT pin configuration

関連部品&用語

STMicroelectronics LM258AYDT LM258AYD LM258DT TSH22IDT TSB7192IDT dual operational amplifier general-purpose amplifier analog integrated circuit signal conditioning active filter feedback control gain-bandwidth product 1.1 MHz low-power operation 8-SOIC SOIC package family surface-mount device industrial sensor interface audio preamplifier power-supply monitoring portable instrumentation input common-mode voltage supply bypass capacitor
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示