onsemi

LM2902AMX - Quad 14-SOP Op Amp | onsemi | Signal Control

部品番号: LM2902AMX ✓ 生産中
40 nA Id 14-SOP Package
MOQ: 1 |

LM2902AMX 概要

The onsemi LM2902AMX is a general-purpose quad operational amplifier in a 14-pin SOP package, providing four amplifier circuits with a 40 nA input bias current for industrial signal-conditioning, instrumentation, and low-voltage analog systems. The device is identified as a standard general-purpose amplifier with four circuits in a 14-SOP package, making it suitable for designs that need several amplifier channels while controlling component count and board area.

An operational amplifier is an analog amplifier that uses very high open-loop gain and negative feedback to amplify small voltage differences. The quad LM2902AMX places four amplifiers in one package, each with its own two inputs and one output while sharing the supply pins. Within the product taxonomy, it is an operational amplifier within the broader amplifier IC and analog signal-processing categories.

The LM2902AMX is specifically identified as a standard general-purpose amplifier, which makes it appropriate for buffering, current-to-voltage conversion, differential amplification, level shifting, and feedback-control circuits. Its 40 nA input bias current supports applications in which bias-related error must remain controlled around sensitive analog nodes. The 14-SOP package also provides a conventional surface-mount option for industrial, instrumentation, and embedded control equipment.

Because four amplifier sections share one package, the device can reduce component count and simplify routing in multi-channel analog boards. Typical uses include amplifier banks in control panels, sensor conditioning channels, active filtering, and low-frequency analog signal processing. Designers should confirm input common-mode range, output swing, supply-voltage limits, offset voltage, input offset current, unity-gain bandwidth, slew rate, noise, and temperature limits against the manufacturer datasheet before finalizing a design.

The principal design trade-off is that a general-purpose quad amplifier prioritizes flexibility and channel density rather than the very low offset, low noise, high bandwidth, or rail-to-rail performance available from specialized amplifier families. Applications operating from a single supply, near the positive rail, or with very small sensor signals may require additional output biasing or a different amplifier architecture. Decoupling capacitors, input protection, output loading, and stability with capacitive loads must also be evaluated per circuit.

This page combines package and catalog information with application guidance, drop-in replacement comparisons, and practical design notes. It is intended to help engineers qualify the LM2902AMX for industrial analog boards faster than by reading the datasheet and distributor listings separately.

ドロップイン代替品: LM2902AMX — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LM2902AMX (同一形状・フットプリント) — 相違点: Package.

Texas Instruments
Package: 14-SOIC
比較対象 LM2902AMX →
Texas Instruments
Package: 14-SOIC
比較対象 LM2902AMX →
onsemi
Package: 14-pin SOP
比較対象 LM2902AMX →

LM2902M

✅ ドロップイン
onsemi
📦 SOIC-14
Quad operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV · Standard general-purpose amplifier · Internal frequency compensation · 4 independent amplifiers

価格はお問い合わせください

データシートを見る →

LM2902AM

✅ ドロップイン
📦 SOIC-14
Same 4-amplifier configuration and 14-pin footprint (0 difference in pin count); grade suffix differs

📋 参考代替品(カタログ未掲載)

LM2902DR

✅ ドロップイン
Texas Instruments
📦 SOIC-14
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

価格はお問い合わせください

データシートを見る →

LM2902DR

✅ ドロップイン
Texas Instruments
📦 SOIC-14
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

価格はお問い合わせください

データシートを見る →

LM2902D

✅ ドロップイン
Texas Instruments
📦 SOIC-14
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

価格はお問い合わせください

データシートを見る →

LM2902DT

✅ ドロップイン
STMicroelectronics
📦 SOIC-14
Quad (4 independent op-amps) · General purpose, bipolar · 1.3 MHz · 0.4 V/us · 3 V to 30 V · +/-1.5 V to +/-15 V · 2 mV (max) · 20 nA

価格はお問い合わせください

データシートを見る →

LM2902AMX 最大定格&電気的特性

Product Type Quad operational amplifier
Amplifier Count 4 circuits
パッケージ 14-SOP
Package Pin Count 14 pins
実装タイプ Surface mount
Input Bias Current 40 nA

LM2902AMX ピン構成

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
ピン 1 OUT1 — Amplifier 1 output
ピン 2 IN1- — Amplifier 1 inverting input
ピン 3 IN1+ — Amplifier 1 non-inverting input
ピン 4 V+ — Positive supply connection
ピン 5 IN2+ — Amplifier 2 non-inverting input
ピン 6 IN2- — Amplifier 2 inverting input
ピン 7 OUT2 — Amplifier 2 output
ピン 8 OUT3 — Amplifier 3 output
ピン 9 IN3- — Amplifier 3 inverting input
ピン 10 IN3+ — Amplifier 3 non-inverting input
ピン 11 V- — Negative supply connection
ピン 12 IN4+ — Amplifier 4 non-inverting input
ピン 13 IN4- — Amplifier 4 inverting input
ピン 14 OUT4 — Amplifier 4 output

主な用途

LM2902AMX の用途: 6 件s: Industrial Sensor Signal Conditioning, Process Control Analog Front End, Measurement and Instrumentation Amplification, Active Filtering and Signal Conditioning, Power Supply Control and Feedback Loops, Embedded Control Analog Interface.

🏭

Industrial Sensor Signal Conditioning

The onsemi LM2902AMX suits four-channel industrial sensor conditioning when a general-purpose amplifier and the 14-SOP package are the principal requirements. Its listed 40 nA input bias current limits bias-induced error at higher-impedance sensor nodes, while four amplifier sections allow simultaneous conditioning of thermocouple, resistive-sensor, or low-level process signals. Each amplifier can buffer a source or amplify a differential bridge output. Before layout release, verify the input common-mode range against the sensor excitation level and confirm that amplifier offset, bandwidth, and output swing meet the required measurement accuracy.

⚙️

Process Control Analog Front End

The LM2902AMX can implement gain, buffering, and active filtering stages in a process-control analog front end. Four integrated amplifier sections reduce the number of packages needed for four similar channels and keep routing within one 14-SOP footprint. The 40 nA input bias current is useful when the source resistance is high, but the complete resistance and signal-amplitude budget must be calculated to determine the resulting input-referred error. Confirm the amplifier's common-mode range and output capability against the 4-20 mA or voltage-sensing stage being designed.

📊

Measurement and Instrumentation Amplification

The LM2902AMX is applicable to instrumentation front ends that need several buffered measurement channels within a compact surface-mount footprint. Four general-purpose amplifier sections can form non-inverting, inverting, difference, or active-filter stages, subject to the device's input and output voltage limits. The 40 nA input bias current contributes to error proportional to input impedance, so high-impedance transducers should be checked against the maximum bias current specified for the exact grade. Gain-bandwidth requirements and capacitive loading should also be verified before finalizing each channel.

🎛️

Active Filtering and Signal Conditioning

The LM2902AMX's four amplifier sections can implement first- and higher-order active filters, integrators, and gain stages where general-purpose performance is adequate. Integrating four amplifiers in one 14-SOP package simplifies multi-channel filter layouts and can reduce board-level component count. Filter stability still depends on the selected closed-loop gain, component tolerances, source impedance, and output load, so use the manufacturer's recommended operating conditions. Confirm the unity-gain bandwidth and slew rate before selecting component values for the highest frequency of interest.

⚡

Power Supply Control and Feedback Loops

The LM2902AMX can support error-amplifier, feedback, and supervisory-loop functions in linear power-control circuitry. Its four amplifier sections allow several feedback or monitoring channels to share a package, although the common-mode and output limits determine whether each amplifier can directly sense the power stage's operating point. Check the maximum supply voltage, input offset, output swing, and stability requirements against the control-loop node voltages. Keep sensitive feedback traces short and maintain the ground-current path recommended for the amplifier in the power-management layout.

🖥️

Embedded Control Analog Interface

The LM2902AMX is useful as a multi-channel analog interface between sensors or external equipment and an embedded controller. Four amplifiers can provide input buffering, differential-to-single-ended conversion, level conditioning, or output drive ahead of an ADC. The 40 nA input bias current is beneficial when source impedance is moderate, while the 14-SOP package supports compact board layouts. Verify the ADC input range, amplifier output swing, settling requirements, and channel-to-channel behavior. If the controller already incorporates programmable analog functions, confirm that the added amplifier channels provide a necessary accuracy or drive improvement.

What is the LM2902AMX?
The onsemi LM2902AMX is a standard general-purpose quad operational amplifier containing four amplifier circuits in a 14-SOP package. Catalog information identifies the device as a 4-circuit, 14-pin surface-mount amplifier with a 40 nA input bias current. It is intended for general analog signal-processing work where several amplifier channels are required in one package. The onsemi LM2902 datasheet defines the complete electrical limits and recommended operating conditions.
How many amplifiers are inside the LM2902AMX?
The LM2902AMX contains four independent operational amplifiers in one 14-SOP package. Each amplifier has two input terminals and one output terminal, while power and ground are shared across the package. This arrangement allows a single component to implement four analog channels, reducing component count and simplifying PCB routing compared with four separate single-amplifier packages. Use the manufacturer pin-description table when assigning each amplifier section and the shared supply connections.
What is the input bias current of the LM2902AMX?
The listed input bias current for the LM2902AMX is 40 nA. Input bias current flows into or out of the amplifier input terminals and can create an error voltage when multiplied by the impedance of the source or feedback network. Its value is especially relevant for high-impedance sensor interfaces, where a 40 nA bias current contributes to input-referred error. Confirm the test conditions and maximum limit in the onsemi LM2902 datasheet for the selected grade.
Where can I download the LM2902AMX datasheet PDF?
The LM2902AMX datasheet is published by onsemi as the LM2902 family document and covers the four amplifier sections, electrical characteristics, pin configuration, and application guidance. Use the official LM2902 datasheet link on this page for the authoritative PDF. The LM2902AMX designation identifies a specific package and grade of the broader family, so verify the package drawing, temperature range, and ordering information before releasing a production BOM.
Where can I find the LM2902AMX pinout?
The LM2902AMX uses a 14-pin SOP pin configuration with four complete amplifier sections and shared supply connections. The manufacturer pin-description table in the LM2902 datasheet is the authoritative source for assigning pins 1 through 14. Because several similarly named LM2902 order codes use different package suffixes, confirm that the selected land pattern corresponds to the 14-SOP footprint rather than relying only on the family name.
Is the LM2902AMX a drop-in replacement for other LM2902 devices?
The LM2902AMX can be replaced by another LM2902 device only when the alternative has the same 14-pin SOP footprint, matching amplifier pin arrangement, and acceptable electrical performance for the application. onsemi LM2902M and LM2902AM are natural same-family candidates because they retain the quad, 14-pin architecture. Cross-brand substitutes must be checked for offset, bias current, bandwidth, common-mode range, and temperature-grade differences rather than accepted on package appearance alone.
What is the best drop-in replacement for LM2902AMX?
The onsemi LM2902M is the closest same-family drop-in candidate for the LM2902AMX because both are four-amplifier devices in a 14-SOP package. LM2902AM is another same-package option for designs that do not require the specific grade suffix of the original part. Before substitution, compare maximum input offset voltage, input bias current, unity-gain bandwidth, output swing, supply range, and operating temperature from the manufacturer datasheets.
LM2902AMX vs LM2902M - which is better?
The LM2902AMX and onsemi LM2902M share the same basic quad general-purpose amplifier architecture and 14-SOP package, so either can suit a conventional four-channel analog design. Selection should follow the exact grade requirements: offset voltage, bias current, noise, bandwidth, temperature range, and qualification status. The LM2902M is the most direct family substitute, but it is only a drop-in replacement when its complete operating limits satisfy the original circuit requirements.
When should I choose the LM2902AMX over another quad op amp?
Choose the LM2902AMX when a design needs four conventional general-purpose amplifier channels, a 14-SOP footprint, and a listed 40 nA input bias current. It is preferable to a specialized low-noise, low-offset, high-speed, or rail-to-rail amplifier when those specialized performance levels are not required. If the circuit operates close to its supply rails, processes extremely small signals, or requires high bandwidth, select a device whose common-mode range, offset, and slew rate match those constraints instead.
Is the LM2902AMX suitable for sensor conditioning applications?
The LM2902AMX is suitable for many general sensor-conditioning applications because it provides four amplifiers in one 14-SOP package and has a 40 nA listed input bias current. It can support buffering, differential amplification, and current-to-voltage conversion when the source impedance and signal level fall within the amplifier's electrical limits. For high-impedance sensors, verify input bias current, input offset voltage, input capacitance, and common-mode range before committing the design.
What can replace the LM2902AMX?
A valid replacement for the LM2902AMX must have four amplifiers in a compatible 14-pin SOP land pattern with the same functional pin assignment. onsemi LM2902M and LM2902AM are same-family candidates, while STMicroelectronics and NXP LM2902 devices can serve as cross-brand options where their published electrical characteristics match the circuit. Confirm supply range, common-mode limits, output swing, offset, bandwidth, noise, and temperature limits for every proposed substitution.
Is the LM2902AMX the same as an LM324 quad amplifier?
The LM2902AMX and LM324 are both members of the familiar general-purpose amplifier family, but they are not automatically interchangeable without checking the detailed specifications and package pin assignment. The LM2902 family is characterized here as four amplifier circuits in a 14-SOP package with a 40 nA input bias current. Compare maximum supply voltage, common-mode range, input offset, output swing, and temperature grade against the specific LM324 and LM2902 datasheets before substituting.
Where can I buy LM2902AMX online?
Use the Request a Quote form on this page to request LM2902AMX availability, current lead time, minimum order quantity, and a quotation for the required quantity. The form supports direct purchasing coordination without relying on stale catalog pricing. When requesting the part, include the onsemi manufacturer name, LM2902AMX order code, 14-SOP package requirement, and your target delivery schedule so the quotation can be matched to the correct catalog item.
What is the lead time for LM2902AMX?
Lead time for the LM2902AMX depends on supplier inventory, the exact onsemi order code, and your order volume. Submit the quantity, target date, and packaging requirements through the Request a Quote form on this page to obtain a current scheduling response. The onsemi family includes multiple 14-SOP order codes and legacy manufacturing sources, so the quote should state the exact MPN to avoid receiving a device with different grade or qualification requirements.
What are the key specifications of LM2902AMX that engineers should know?
The essential catalog-level characteristics are four amplifier circuits, a 14-SOP surface-mount package, and a 40 nA input bias current. The part is classified as a standard general-purpose operational amplifier rather than a specialized precision, low-noise, or high-speed device. Complete production design decisions also require supply voltage, input offset, common-mode range, output swing, unity-gain bandwidth, slew rate, noise, current, and temperature limits from the LM2902 datasheet.
What STMicroelectronics or NXP equivalent fits the LM2902AMX?
STMicroelectronics and NXP both publish LM2902-family devices in 14-pin packages that can provide pin-compatible alternatives to the onsemi LM2902AMX. The correct cross-brand selection depends on package drawing, amplifier pinout, supply voltage, input common-mode range, output swing, offset, input bias current, bandwidth, noise, and temperature grade. Use the manufacturer cross-reference and datasheets to identify the exact orderable MPN rather than treating every LM2902-labeled part as interchangeable.
Does the LM2902AMX need bypass capacitors for stable operation?
Follow the manufacturer datasheet when placing supply-bypass capacitors because stability and transient performance depend on the complete circuit, including load capacitance, feedback network, source impedance, and supply wiring. Place any required bypass capacitors close to the supply pins to minimize parasitic inductance and keep high-frequency current loops compact. Also verify that capacitive loads remain within the recommended range or apply an isolation resistor and suitable compensation network.

エンジニアリング参考データ: LM2902AMX — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the LM2902AMX when an industrial or instrumentation board needs four conventional general-purpose amplifier channels in a 14-SOP package and the listed 40 nA input bias current is appropriate for the source impedance. The onsemi LM2902M is the closest same-family alternative for onsemi continuity, while LM2902AM or LM2902DR can support other onsemi order-code requirements. Consider the STMicroelectronics and NXP LM2902 options when dual sourcing is valuable, but compare the complete electrical grades rather than relying on package matching alone. Choose a precision, low-noise, rail-to-rail, or high-speed amplifier family instead when the circuit requires tighter offset, lower noise, direct rail operation, or substantially wider bandwidth.

代替品との比較

パラメータ この製品 LM2902M LM2902AM LM2902DR LM2902DR LM2902D LM2902DT
Brand onsemi onsemi onsemi onsemi STMicroelectronics NXP Semiconductors STMicroelectronics
Package 14-SOP (SOIC-14) 14-SOP (SOIC-14) 14-SOP (SOIC-14) 14-SOP (SOIC-14) 14-SOP (SOIC-14) 14-SOP (SOIC-14) 14-SOP (SOIC-14)
Amplifier Count 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Pin Count 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins

主な差別化要因

  • Four-channel integration in a conventional 14-SOP package (vs LM358N)
  • Listed 40 nA input bias current (vs LM2902M)
  • Same-family drop-in option for onsemi boards (vs STMicroelectronics LM2902DR)
  • Cross-brand sourcing flexibility with a common 14-pin architecture (vs NXP LM2902D)

設計ノート

Keep the four amplifier channels' input and feedback traces short and route them away from switching nodes, high-current power paths, and digital clock signals. Place supply-bypass capacitors close to the V+ and V- pins with short ground returns. Because all four amplifiers share package supply connections, high-current output loading on one section can create package-level supply disturbance across the other sections; split return paths or add local decoupling when channels operate at widely different load levels.

Do not assume that the LM2902 family reaches either supply rail. Check the input common-mode range and output voltage swing in the manufacturer datasheet against the minimum and maximum signal present at every amplifier pin, especially in single-supply designs. For a single-supply circuit operating near ground, either bias the signal within the usable input range or place a suitable offset-reference amplifier in front of the LM2902AMX. Also check the exact grade's maximum supply voltage.

Estimate input-referred bias error by multiplying the 40 nA listed input bias current by the total resistance seen at the relevant input. This error becomes significant for megohm-scale sensor networks even when the amplifier itself is stable. Use lower source impedance where practical, maintain balanced feedback impedances, and apply input-bias compensation when the application requires precision DC measurements. Verify offset voltage, input offset current, and drift for the exact LM2902 grade in addition to nominal bias current.

For capacitive sensor outputs, amplifier inputs, and feedback networks, use compact guard techniques and keep sensitive nodes physically separated from ground and supply-current paths. Avoid adding long point-to-point jumper wiring around the amplifier because parasitic capacitance can alter feedback behavior. If the load is capacitive, use the manufacturer's stability guidance, including an isolation resistor or compensation network, rather than driving a large capacitor directly from the output.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The LM2902AMX is a general-purpose operational amplifier; AEC-Q100 qualification does not apply. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the available catalog records and remain unknown.

データ検証日: 2026-11-17 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

LM2902AMX LM2902AMX datasheet LM2902AMX datasheet pdf LM2902AMX pinout LM2902AMX equivalent LM2902AMX replacement LM2902AMX cross reference LM2902AMX vs LM2902M onsemi LM2902AMX LM2902AMX 14-SOP op amp LM2902AMX application circuit LM2902AMX price LM2902AMX stock LM2902AMX lead time

関連部品&用語

onsemi LM2902AMX LM2902M LM2902AM LM2902DR STMicroelectronics NXP Semiconductors operational amplifier quad amplifier general-purpose amplifier analog signal processing signal conditioning active filter sensor interface input bias current input offset voltage unity-gain bandwidth slew rate 14-SOP SOIC-14 surface-mount package RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示