onsemi

LM2904M-FS - Dual 26V Op Amp 500V/ms | onsemi

部品番号: LM2904M-FS ✓ 生産中
Up to 26 V Vdss 250 nA Id 8-pin SOIC Package
MOQ: 1 |

LM2904M-FS 概要

The onsemi LM2904M-FS is a dual general-purpose operational amplifier in an 8-pin SOIC package, with two independent internally frequency-compensated amplifier channels designed for operation from a single power supply. Key characteristics include a 250 nA input-bias current, 500 V/ms slew rate, and approximately 2 mV input offset voltage for the listed configuration.

An operational amplifier is an analog signal-conditioning IC that compares an inverting input with a non-inverting input and amplifies the voltage difference between them. The dual-amplifier configuration places two independent amplifiers in one package, making the LM2904M-FS suitable for signal conditioning, feedback-control loops, sensor amplification, and general analog signal paths. Within the product hierarchy, it is a dual operational amplifier within the amplifier-IC and analog-semiconductor categories.

The LM2904M-FS combines a 26 V maximum supply capability from the LM2904 family with low input-bias current and a 500 V/ms slew rate. Its internally compensated architecture removes the need for an external frequency-compensation network in common closed-loop applications. The two independent channels can operate in non-inverting, inverting, voltage-follower, comparator-style, and feedback configurations, provided the design respects the device's common-mode and output-voltage limits.

The 8-SOIC footprint provides a conventional surface-mount assembly format with exposed leads on both package sides. Each half of the amplifier uses four pins: two inputs, one output, and the power connection. The standard SOIC-8 pin arrangement simplifies PCB layout, but normal single-supply operation requires bypassing the positive supply pin to ground and accounting for the input and output common-mode limitations near the supply rails.

Typical applications include low-frequency industrial instrumentation, buffered sensor interfaces, audio preamplifier stages, analog monitoring, and general-purpose dual-amplifier signal conditioning. The LM2904M-FS is particularly useful where two related analog channels are required on one board, such as an input stage and feedback amplifier in a control circuit. For high-speed or very low-offset instrumentation, a precision amplifier family may be preferable.

Decouple the power supply with a short, low-inductance path from the positive supply pin to ground, and route the amplifier output away from high-current switching nodes. Avoid using the device outside its input common-mode range, especially in single-supply circuits where the input approaches ground. Stable feedback-network layout and adequate output-load capability should be verified for every analog channel.

This product page combines the exact LM2904M-FS ordering information with family-level electrical characteristics, a complete SOIC-8 pin map, practical application guidance, and a qualified drop-in comparison. It is designed to help engineers identify the correct footprint, understand the device's analog signal-conditioning role, and select among documented alternatives without changing the PCB land pattern.

ドロップイン代替品: LM2904M-FS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LM2904M-FS (同一形状・フットプリント) — 相違点: Package, Amplifier Type, Input Offset Voltage, Number of Channels, Slew Rate.

Texas Instruments
Package: SOIC-8 (D)
Input Offset Voltage: 0.5 mV typical / 3 mV maximum
Number of Channels: 2 (Dual)
比較対象 LM2904M-FS →
Texas Instruments
Package: 8-SOIC (D)
Amplifier Type: General Purpose
Input Offset Voltage: 2 mV (typical)
比較対象 LM2904M-FS →
Texas Instruments
Amplifier Type: 2-circuit operational amplifier

LM2904M/NOPB

✅ ドロップイン
Texas Instruments
📦 8-SOIC
2-circuit operational amplifier · 2 units · 26 V · 700 kHz · Single or split supply · -40 °C to +85 °C · 8-pin SOIC · Surface mount

価格はお問い合わせください

データシートを見る →

LM2904D

✅ ドロップイン
Texas Instruments
📦 8-SOIC
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

価格はお問い合わせください

データシートを見る →

LM2904BIDR

✅ ドロップイン
Texas Instruments
📦 8-SOIC
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

価格はお問い合わせください

データシートを見る →

LM2904BA

✅ ドロップイン
📦 8-SOIC
LM2904BA family option with the same dual-amplifier architecture and 700 kHz family bandwidth reference, while offset-voltage and qualification limits may differ from LM2904M-FS

📋 参考代替品(カタログ未掲載)

LM2904M-FS 最大定格&電気的特性

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 circuits
電源電圧 Up to 26 V
Supply Configuration Single supply
Input Bias Current 250 nA
Slew Rate 500 V/ms
Input Offset Voltage 2 mV
Gain-Bandwidth Product 700 kHz
Compensation Internally frequency compensated
パッケージ 8-pin SOIC
実装タイプ Surface mount
Channel Count 2
RoHS ステータス Compliant
Slew Rate 500 V/ms

LM2904M-FS ピン構成

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
ピン 1 OUT1 — Output of amplifier channel 1
ピン 2 -IN1 — Inverting input of amplifier channel 1
ピン 3 +IN1 — Non-inverting input of amplifier channel 1
ピン 4 V- — Negative power supply or ground connection
ピン 5 +IN2 — Non-inverting input of amplifier channel 2
ピン 6 -IN2 — Inverting input of amplifier channel 2
ピン 7 OUT2 — Output of amplifier channel 2
ピン 8 V+ — Positive power supply connection

主な用途

LM2904M-FS の用途: 6 件s: Industrial Sensor Signal Conditioning, Audio Preamplifier and Buffer, Power Supply Feedback Control, Analog Monitoring and Instrumentation, IoT Sensor Interface, Automotive and Vehicle Electronics.

🏭

Industrial Sensor Signal Conditioning

The onsemi LM2904M-FS fits a dual-channel industrial sensor front end because each internally compensated amplifier can provide gain, inversion, filtering, or buffering for a low-frequency transducer signal. Its listed 250 nA input-bias current is useful when the source impedance is high enough that amplifier bias current could distort the measurement, while the 500 V/ms slew rate supports signals beyond very low audio frequencies. Place the sensing channel and a feedback or reference amplifier on the two independent sections. The principal design constraint is the input common-mode range: single-supply operation is convenient for 5 V systems, but the sensor output must remain inside the range stated by the onsemi LM2904 family datasheet. Decouple the supply pin locally and avoid routing the sensor input beside switching-node traces.

🎧

Audio Preamplifier and Buffer

The LM2904M-FS can provide the first gain stage and an output buffer in a low-frequency audio preamplifier because the SOIC-8 package contains two independent amplifiers. The 500 V/ms slew rate is adequate for many audio-band signals, and the approximately 2 mV offset in the listed configuration can affect the quiescent output level in a single-supply circuit. Use one channel for gain and the other for buffering or active filtering, with the feedback resistors selected for the intended impedance and bandwidth. Avoid using the device where its input offset and bias characteristics exceed the system noise or headroom budget. Keep the ground return of the audio path away from motor, relay, and switching-converter currents.

⚡

Power Supply Feedback Control

The two channels in the onsemi LM2904M-FS can implement error amplification and output buffering in a basic analog control or regulated-supply feedback path. The internal frequency compensation simplifies the stable closed-loop design, and the 26 V LM2904 family supply capability supports higher-voltage control circuitry. One amplifier may compare the feedback node with a reference, while the other drives or buffers the controlled node. The design must account for the amplifier's output swing, input common-mode limits, and the phase margin created by the complete feedback network. Keep the high-current power stage electrically separated from the feedback trace, and place the supply bypass capacitor directly across the positive and ground pins.

🖥️

Analog Monitoring and Instrumentation

The LM2904M-FS is appropriate for low-frequency monitoring modules that amplify a conditioned sensor or measurement signal and provide a second channel for reference, filter, or differential-output functions. The 250 nA input-bias current helps minimize loading when the monitored circuit presents a high source impedance, and the 500 V/ms slew rate avoids severe slew distortion on moderate-bandwidth waveforms. In a single-supply instrument, bias the signal into the valid common-mode region and evaluate whether the approximately 2 mV offset is acceptable at the required gain. Use short, guarded feedback paths and connect the two amplifier grounds to the same quiet analog return. Verify noise and accuracy against the measurement bandwidth rather than selecting the device from slew rate alone.

🧩

IoT Sensor Interface

The LM2904M-FS can condition a sensor output before an ADC or embedded controller in an IoT node because its dual channels support both amplification and filtering. A 250 nA input-bias current is valuable for high-impedance sensors, while the internal compensation allows closed-loop operation without a separate compensation capacitor. One section can amplify the sensor signal and the other can form an active low-pass filter, although both sections share the same supply limitations. The single-supply architecture fits 3.3 V or 5 V systems, provided the signal stays within the input common-mode range. Place the IC near the sensor input, keep the analog trace short, and separate the supply bypass return from digital and wireless switching currents.

🚗

Automotive and Vehicle Electronics

The LM2904M-FS can be evaluated for low-frequency vehicle electronics such as actuator feedback, sensor conditioning, and simple control loops. Its dual SOIC-8 implementation reduces component count when two independent analog functions are required, and the LM2904 family's 26 V supply capability covers many 12 V vehicle rails when suitable transient and operating requirements are met. Automotive use requires additional review of temperature range, qualification, ESD behavior, load dump exposure, and production status because the base LM2904M-FS listing does not by itself establish AEC-Q100 qualification. Use a qualified automotive amplifier if the vehicle program mandates it, and protect every external pin against the vehicle's electrical environment.

What is the LM2904M-FS?
The onsemi LM2904M-FS is a dual general-purpose operational amplifier packaged in an 8-pin SOIC. According to the onsemi LM2904 family datasheet, it contains two independent, internally frequency-compensated amplifiers designed for single-supply operation over a wide voltage range. Each channel provides separate input and output pins, allowing the device to handle two related analog signals in one circuit.
What are the key specifications of LM2904M-FS that engineers should know?
The LM2904M-FS provides two amplifier channels, a 250 nA input-bias current, a 500 V/ms slew rate, and an approximately 2 mV input offset voltage in the listed configuration. It uses an 8-pin SOIC package and is internally frequency compensated. According to the onsemi datasheet and the LM2904 family documentation, the device is intended for general-purpose single-supply analog signal-conditioning applications.
Where can I download the LM2904M-FS datasheet PDF?
The LM2904M-FS documentation is available through the onsemi LM2904 family datasheet and the manufacturer-linked LM2904M pages. The datasheet contains the electrical characteristics, SOIC-8 pin configuration, typical application circuits, and ordering information. Use the onsemi LM2904 family document for the authoritative electrical limits and the LM2904M-FS ordering suffix when purchasing the exact reelable part.
Where can I find the LM2904M-FS pinout?
The LM2904M-FS uses the standard dual-op-amp SOIC-8 arrangement: pin 1 is output 1, pins 2 and 3 are inverting and non-inverting inputs 1, pin 4 is negative supply, pins 5 and 6 are non-inverting and inverting inputs 2, pin 7 is output 2, and pin 8 is positive supply. Confirm this assignment against the pin-description table in the onsemi LM2904 datasheet before PCB release.
What is the supply-voltage range of the LM2904M-FS?
The LM2904M-FS belongs to the LM2904 family specified for operation up to a 26 V maximum supply. According to the LM2904 family documentation, single-supply operation is supported across the applicable lower and upper operating limits, with input and output voltage restrictions applying near the rails. Use the datasheet's recommended operating-area diagram to validate a particular supply voltage and signal level.
Is LM2904M-FS suitable for single 5V supply operation?
The LM2904M-FS is designed for single-supply operation, making a 5 V rail appropriate for many general-purpose applications. However, single-supply operation constrains the usable input and output range, and the datasheet's common-mode limits must be respected. The device is most suitable when signal levels remain inside that permitted region rather than approaching the positive supply rail.
What can replace the LM2904M-FS?
A valid replacement should use the same 8-pin SOIC footprint, preserve the two-channel pin arrangement, and satisfy the required supply voltage, offset, slew-rate, and input-bias-current limits. Documented alternatives in the LM2904 family include LM2904M/NOPB, LM2904D, LM2904B, and LM2904BA. Confirm the exact manufacturer suffix and electrical grade against the current datasheet before replacing the onsemi LM2904M-FS.
What is the best Texas Instruments equivalent for LM2904M-FS?
The Texas Instruments LM2904M/NOPB is the closest documented SOIC-8 option because it is identified as a dual general-purpose amplifier in an 8-SOIC package and follows the LM2904 family architecture. Pin compatibility must still be confirmed against the exact TI pinout and required electrical limits. The onsemi LM2904M-FS remains preferable when its onsemi sourcing and exact -FS order code are required.
LM2904M-FS vs LM2904M/NOPB: which is better for an industrial analog board?
Choose the LM2904M-FS when the onsemi LM2904M family, exact -FS ordering code, and its listed 250 nA bias current and 500 V/ms slew rate are required. Choose LM2904M/NOPB when TI sourcing or the NOPB ordering option is preferred and its electrical limits meet the design. Both are presented in the 8-SOIC family, but qualification, temperature grade, and production-status requirements should be checked independently.
When should I choose LM2904M-FS over LM2904B or LM2904BA?
Choose LM2904M-FS when the design specifically requires the onsemi LM2904M-FS variant and its stated 250 nA bias current, 500 V/ms slew rate, and approximately 2 mV offset. Consider LM2904B or LM2904BA when their current manufacturer specifications provide a better match for offset accuracy, supply range, noise, or automotive qualification. The correct choice is determined by the application's worst-case electrical requirements rather than package similarity alone.
Is LM2904M-FS the same as LM2904M/NOPB?
No. The LM2904M-FS and LM2904M/NOPB are different manufacturer order codes for devices in the broadly similar LM2904 dual-op-amp class, and they must not be treated as identical solely because both use an 8-SOIC package. Review the manufacturer-specific pinout, electrical characteristics, temperature range, and qualification status before substituting one ordering code for the other.
Where can I buy LM2904M-FS online?
Use the Request a Quote form on this page to request the onsemi LM2904M-FS, current lead time, and order confirmation for the required quantity. The form is the appropriate channel for commercial availability and sourcing questions. The -FS suffix identifies the specific onsemi orderable configuration, so quote requests should include the complete MPN and required reel quantity.
What is the price of LM2904M-FS?
Use the Request a Quote form on this page for the current LM2904M-FS commercial quotation. The form should receive the exact onsemi MPN, desired quantity, and shipment destination so the supplier can confirm the applicable price and lead time. Quotation details can change with quantity, packaging, and market conditions, so confirm them before placing a purchase order.
Is LM2904M-FS in stock and what is its lead time?
Current LM2904M-FS stock and lead time should be confirmed through the Request a Quote form on this page. Include the required quantity, reel packaging, and destination in the request. The exact -FS order code is important because LM2904 family members and manufacturer suffixes can have different production and packaging arrangements.
Does LM2904M-FS meet RoHS requirements?
The LM2904M-FS product information is identified as RoHS compliant. According to that product listing, the device supports lead-free environmental requirements for the ordering configuration. RoHS status does not by itself establish REACH, AEC-Q100, conflict-minerals, or halogen-free status, so those requirements should be confirmed separately when they form part of the product qualification specification.
What electrical limitations matter most when designing with LM2904M-FS?
The most important limitations are the permitted input common-mode range, output swing, supply voltage, and stability with the selected feedback network. According to the onsemi LM2904 family datasheet, the amplifier is internally frequency compensated but still requires suitable closed-loop gain, source impedance, load, and decoupling. Keep inputs and outputs within their specified ranges and follow the recommended application-circuit layout.

エンジニアリング参考データ: LM2904M-FS — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the onsemi LM2904M-FS when the exact -FS order code must be retained and the design needs a dual, internally compensated general-purpose amplifier with a documented 250 nA input-bias current, 500 V/ms slew rate, and approximately 2 mV offset. Select LM2904M/NOPB when Texas Instruments sourcing or the NOPB order designation is preferred and its grade-specific limits satisfy the application. Consider LM2904D when that TI family ordering option offers the needed sourcing and qualification conditions. LM2904B or LM2904BA may be preferable when their current specifications improve offset accuracy, supply range, noise, or qualification relative to the original LM2904M-FS. All listed alternatives use the same 8-SOIC footprint, but engineers must still compare input bias current, common-mode range, output swing, slew rate, temperature grade, and stability with the actual load before final substitution.

代替品との比較

パラメータ この製品 LM2904M/NOPB LM2904D LM2904B LM2904BA
Manufacturer onsemi Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Channels 2 2 2 2 2
Product Family LM2904 LM2904 LM2904 LM2904B LM2904BA
Compensation Internal Internal Internal Internal Internal
Supply Configuration Single supply Single supply Single supply Single supply Single supply

主な差別化要因

  • Uses the exact onsemi LM2904M-FS order configuration (vs LM2904M/NOPB)
  • Documented 250 nA input-bias current (vs LM2904B)
  • Documented 500 V/ms slew rate (vs LM2904BA)
  • Explicit approximately 2 mV offset specification (vs LM2904D)

設計ノート

Place the supply bypass capacitor directly between pin 8 (V+) and pin 4 (V-) with a short, low-inductance return path. Connect the two amplifier channels to the same quiet analog ground when they process related signals. Route feedback resistors close to their associated input pins, and avoid placing the analog input traces parallel to switching-node or high-current output paths because capacitive coupling can degrade the 250 nA-class input behavior.

Check the input common-mode range and output swing before selecting single-supply operating points. A 5 V supply does not make every 0 V input usable at every gain, and the output also has headroom restrictions. The LM2904M-FS is internally compensated, but stable operation still depends on the selected closed-loop gain, source impedance, capacitive load, feedback values, and power-supply bypassing. Use the manufacturer's application and stability guidance when driving unusual loads.

For low-frequency sensor interfaces, keep the high-impedance input node physically small and guard it against moisture and surface leakage. The listed 250 nA input-bias current becomes less significant as source impedance decreases, while the approximately 2 mV offset can become more visible after high gain. Evaluate the complete gain chain, including sensor tolerance, reference accuracy, resistor errors, and amplifier offset, rather than relying on slew rate alone.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The LM2904M-FS product listing identifies the device as RoHS compliant. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was found in the cited product information.

関連検索

lm2904m datasheet lm2904m nopb lm2904m onsemi lm2904m datasheet pdf LM2904M-FS datasheet LM2904M-FS pinout LM2904M-FS equivalent LM2904M-FS replacement LM2904M-FS SOIC-8 LM2904M-FS price LM2904M-FS stock onsemi LM2904M-FS LM2904M-FS vs LM2904M/NOPB LM2904M-FS application circuit

関連部品&用語

onsemi LM2904M-FS LM2904M LM2904M/NOPB LM2904D LM2904B LM2904BA operational amplifier dual operational amplifier amplifier IC analog semiconductor single-supply operation input bias current input offset voltage slew rate gain-bandwidth product internal frequency compensation common-mode voltage 8-SOIC SOIC package family surface-mount technology industrial sensor conditioning audio preamplifier analog feedback control
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示