LM358BIPWR - Dual 36V 1.2MHz Op Amp | Texas Instruments
部品番号: LM358BIPWR ✓ 生産中LM358BIPWR 概要
An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. It belongs to the amplifier hierarchy that includes differential amplifiers, instrumentation amplifiers, and the broader category of analog signal-chain ICs. The LM358B contains two independent, internally compensated amplifiers sharing common supply and ground pins, making it useful where two amplified signals must be handled in one compact package.
The LM358B version provides several characteristics suited to industrial and general-purpose designs. Its 3 V to 36 V operating range allows operation from conventional 5 V and 12 V rails as well as higher industrial supply voltages. A 300 uA quiescent current per channel supports power-conscious instrumentation, while the 1.2 MHz unity-gain bandwidth provides useful response for audio, control, and low-frequency signal-conditioning applications. Its common-mode input voltage range includes ground, enabling direct sensing of signals near the lower supply rail.
Internally, each channel combines high open-loop gain with frequency compensation, allowing the device to operate as a unity-gain stable buffer without an external compensation capacitor. The two amplifiers are independent, although they share the same supply pins. This arrangement permits simultaneous functions such as signal amplification and active filtering, or two channels of sensor conditioning, while keeping the component count and PCB area below that of separate single-channel amplifiers.
Typical applications include low-level sensor signal conditioning, transducer amplification, active filters, audio preamplifier stages, motor and actuator control loops, and general industrial control systems. The 8-pin TSSOP package is particularly useful for compact analog boards where a dual amplifier is required but SOIC or larger packages would be unnecessary.
When designing around the LM358BIPWR, maintain adequate input and output voltage headroom at the selected supply voltage, especially for output swings near either rail. Place input-referring components close to the amplifier pins, keep feedback traces short, and verify that the intended signal bandwidth remains well below the 1.2 MHz unity-gain limit. Decoupling capacitance should be selected according to the manufacturer's recommended application circuit and layout guidance.
This page combines manufacturer specifications, distributor availability information, cross-reference results, application guidance, and practical design considerations. It is intended to help engineers evaluate the LM358BIPWR for industrial, instrumentation, audio, and embedded-control designs without relying solely on a catalog parameter table.
ドロップイン代替品: LM358BIPWR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LM358BIPWR (同一形状・フットプリント) — 相違点: Amplifier Type, Operating Temperature Range, Package.
LM2902KPWR
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM358BIPWR 最大定格&電気的特性
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels |
| Supply Voltage Range | 3 V to 36 V |
| Unity-Gain Bandwidth | 1.2 MHz |
| Input Offset Voltage | 3 mV |
| 静止電流 | 300 uA per channel |
| Common-Mode Input Voltage Range | Includes ground |
| 動作温度範囲 | -40 °C to +85 °C |
| パッケージ | 8-pin TSSOP (PW) |
| 実装タイプ | Surface mount |
| Product Type | Standard (General Purpose) Amplifier |
| Internal Compensation | Internally compensated |
LM358BIPWR ピン構成
| ピン 1 | OUT1 — Output of amplifier 1 |
| ピン 2 | IN1- — Inverting input of amplifier 1 |
| ピン 3 | IN1+ — Non-inverting input of amplifier 1 |
| ピン 4 | GND — Ground connection |
| ピン 5 | IN2+ — Non-inverting input of amplifier 2 |
| ピン 6 | IN2- — Inverting input of amplifier 2 |
| ピン 7 | OUT2 — Output of amplifier 2 |
| ピン 8 | V+ — Positive supply connection |
主な用途
LM358BIPWR の用途: 6 件s: Industrial Sensor Signal Conditioning, Audio Preamplifier and Buffering, Active Filters and Analog Control Loops, Motor and Actuator Drive Support, Battery-Powered Instrumentation, Compact Embedded Analog Interface.
Industrial Sensor Signal Conditioning
The LM358BIPWR fits low-level instrumentation because its common-mode input range includes ground, allowing signals near the lower supply rail to be sensed without an external level shift. The 3 V to 36 V supply range supports both compact battery-derived electronics and conventional industrial rails. Each internally compensated channel can amplify one sensor output or form the active stage of a filter. With 300 uA of quiescent current per channel and 1.2 MHz unity-gain bandwidth, it handles moderate-frequency process signals while keeping supply demand low. Confirm the sensor output range, offset accuracy, and required settling time before choosing the amplifier gain.
おすすめ
Audio Preamplifier and Buffering
The LM358BIPWR can condition weak audio or microphone signals where a 1.2 MHz unity-gain bandwidth is sufficient for the audible band and surrounding headroom. Its two independent channels allow one stage to amplify an input and the other to buffer a level-shifted signal. The common-mode input range including ground is useful for single-supply preamplifier designs. Designers should add the input and feedback resistors recommended by the manufacturer and confirm output swing against the selected supply. The 3 mV input offset specification should also be checked against the smallest signal the system must resolve.
おすすめ
Active Filters and Analog Control Loops
The LM358BIPWR is well suited to first-order active filters and low-frequency control loops because each channel is internally compensated and unity-gain stable. A 1.2 MHz unity-gain bandwidth provides ample closed-loop bandwidth for many process-control and analog-feedback applications while avoiding the need for external compensation. The dual configuration can implement a two-pole filter or separate two error amplifiers for control and monitoring. Component tolerances determine the achieved cutoff and gain accuracy. Validate stability, phase margin, output-current capability, and settling behavior in the final control loop rather than relying only on the open-loop bandwidth specification.
おすすめ
Motor and Actuator Drive Support
The LM358BIPWR can support low-power motor, solenoid, or actuator drive circuits by providing gain around external power transistors. Its 3 V to 36 V supply capability accommodates common control-voltage rails, while the common-mode input range including ground simplifies feedback sensing from the low side of a driver. The 1.2 MHz unity-gain bandwidth is suitable for many slow outer-loop control systems. Because the device is a general-purpose amplifier rather than a dedicated gate driver, the external transistor selection, flyback protection, thermal margin, and output-current requirements remain the primary design considerations.
おすすめ
Battery-Powered Instrumentation
The 300 uA-per-channel quiescent current of the LM358BIPWR helps limit standing power in battery-powered measurement equipment. Its supply range starts at 3 V, covering cells and regulators that operate below 5 V, while the 36 V maximum gives design headroom when the same amplifier family is used across industrial input stages. The common-mode input range including ground permits direct measurement of low-side sensor voltages. For duty-cycled systems, evaluate amplifier shutdown methods, input-bias contributions, leakage paths, and the accuracy drift over the operating temperature range before estimating battery life.
おすすめ
Compact Embedded Analog Interface
The LM358BIPWR provides two analog channels in an 8-pin TSSOP footprint, which is useful on space-constrained embedded boards requiring sensor amplification, thresholding, or actuator feedback. A 1.2 MHz unity-gain bandwidth supports moderate-speed conditioning while the 3 V to 36 V range allows the amplifier to sit behind a wide-range industrial input conditioning stage. The two channels share supply pins but operate independently, allowing a compact implementation without two separate single-amplifier packages. Place decoupling close to pin 8 and ground connection close to pin 4, route feedback traces away from switching nodes, and use the manufacturer layout guidance to minimize offset and stability problems.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LM358BIPWR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LM2902KPWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) - same footprint |
| Number of Amplifiers | 2 | 2 |
| Amplifier Classification | Standard general-purpose amplifier | General-purpose dual operational amplifier |
主な差別化要因
- Higher-bandwidth option within the same dual TSSOP pin arrangement (vs LM2902KPWR)
- Wide supply accommodation for industrial rails (vs LM2902KPWR)
- Low quiescent current with useful bandwidth (vs LM2902KPWR)
設計ノート
Place the supply-decoupling capacitor immediately between the positive supply and ground pins, with the ground connection following the manufacturer’s recommended layout. Keep input, feedback, and output traces short and away from switching nodes. Because the TSSOP footprint is compact, route both channels independently and avoid sharing long feedback paths that could couple noise or settling behavior between channels.
Do not treat every LM358-equivalent package as a drop-in substitute. DIP-8 and SOIC-8 alternatives require different footprints and land patterns from the 8-pin TSSOP PW package. When substituting LM2902KPWR, verify its bandwidth, offset voltage, output swing, common-mode range, and stability against the original design. Also confirm that unused-channel inputs are connected according to the manufacturer guidance rather than left floating.
The 1.2 MHz unity-gain bandwidth is the small-signal limit, not a guarantee that a closed-loop design will preserve the same bandwidth. Set the closed-loop gain using the exact noise-gain equation, verify phase margin for capacitive loading, and check settling time for the intended step response. Keep the 3 mV input offset requirement in perspective when amplifying small sensor outputs, since resistor mismatch and bias-current error can dominate the usable accuracy.
Although the LM358BIPWR supports supplies up to 36 V, the maximum supply rating is not a design target for continuous operation. Include the supply tolerance, transients, and output-load requirements in the worst-case analysis. Verify that the external feedback network can discharge every internal node, and confirm the operating temperature against the -40 °C to +85 °C rating when the amplifier is installed away from a temperature-controlled enclosure.
コンプライアンス情報
The listed operating specifications do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. Use the manufacturer product documentation and current declarations for compliance confirmation.