Texas Instruments

LM358BIPWR - Dual 36V 1.2MHz Op Amp | Texas Instruments

Артикул: LM358BIPWR ✓ Активен
3 V to 36 V Vdss 300 uA per channel Id 8-pin TSSOP (PW) Package
MOQ: 1 |

LM358BIPWR Обзор

The Texas Instruments LM358BIPWR is a dual, general-purpose operational amplifier designed for a 3 V to 36 V supply range, with a unity-gain bandwidth of 1.2 MHz, an input offset voltage of 3 mV, and low quiescent current of 300 uA per channel. The device is packaged in an 8-pin TSSOP (PW) package and is specified for operation from -40 °C to +85 °C.

An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. It belongs to the amplifier hierarchy that includes differential amplifiers, instrumentation amplifiers, and the broader category of analog signal-chain ICs. The LM358B contains two independent, internally compensated amplifiers sharing common supply and ground pins, making it useful where two amplified signals must be handled in one compact package.

The LM358B version provides several characteristics suited to industrial and general-purpose designs. Its 3 V to 36 V operating range allows operation from conventional 5 V and 12 V rails as well as higher industrial supply voltages. A 300 uA quiescent current per channel supports power-conscious instrumentation, while the 1.2 MHz unity-gain bandwidth provides useful response for audio, control, and low-frequency signal-conditioning applications. Its common-mode input voltage range includes ground, enabling direct sensing of signals near the lower supply rail.

Internally, each channel combines high open-loop gain with frequency compensation, allowing the device to operate as a unity-gain stable buffer without an external compensation capacitor. The two amplifiers are independent, although they share the same supply pins. This arrangement permits simultaneous functions such as signal amplification and active filtering, or two channels of sensor conditioning, while keeping the component count and PCB area below that of separate single-channel amplifiers.

Typical applications include low-level sensor signal conditioning, transducer amplification, active filters, audio preamplifier stages, motor and actuator control loops, and general industrial control systems. The 8-pin TSSOP package is particularly useful for compact analog boards where a dual amplifier is required but SOIC or larger packages would be unnecessary.

When designing around the LM358BIPWR, maintain adequate input and output voltage headroom at the selected supply voltage, especially for output swings near either rail. Place input-referring components close to the amplifier pins, keep feedback traces short, and verify that the intended signal bandwidth remains well below the 1.2 MHz unity-gain limit. Decoupling capacitance should be selected according to the manufacturer's recommended application circuit and layout guidance.

This page combines manufacturer specifications, distributor availability information, cross-reference results, application guidance, and practical design considerations. It is intended to help engineers evaluate the LM358BIPWR for industrial, instrumentation, audio, and embedded-control designs without relying solely on a catalog parameter table.

Аналоги без доработки для LM358BIPWR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM358BIPWR (тот же форм-фактор и посадочное место) — отличается по Amplifier Type, Operating Temperature Range, Package.

Texas Instruments
Amplifier Type: General-purpose operational amplifier
Operating Temperature Range: -40 °C to +125 °C
Package: 14-pin TSSOP
Сравнить с LM358BIPWR →

LM2902KPWR

✅ Прямая замена
Texas Instruments
📦 TSSOP-8 (PW)
4 amplifiers · General-purpose operational amplifier · 26 V · 1.2 MHz · 2 kV · -40 °C to +125 °C · Single-supply operation · Internally frequency compensated

Уточнить цену

Открыть даташит →

LM358BIPWR Максимальные параметры и электрические характеристики

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Supply Voltage Range 3 V to 36 V
Unity-Gain Bandwidth 1.2 MHz
Input Offset Voltage 3 mV
Ток покоя 300 uA per channel
Common-Mode Input Voltage Range Includes ground
Диапазон рабочих температур -40 °C to +85 °C
Корпус 8-pin TSSOP (PW)
Тип монтажа Surface mount
Product Type Standard (General Purpose) Amplifier
Internal Compensation Internally compensated

Конфигурация выводов LM358BIPWR

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Контакт 1 OUT1 — Output of amplifier 1
Контакт 2 IN1- — Inverting input of amplifier 1
Контакт 3 IN1+ — Non-inverting input of amplifier 1
Контакт 4 GND — Ground connection
Контакт 5 IN2+ — Non-inverting input of amplifier 2
Контакт 6 IN2- — Inverting input of amplifier 2
Контакт 7 OUT2 — Output of amplifier 2
Контакт 8 V+ — Positive supply connection

Типичное применение

LM358BIPWR подходит для 6 применениеs: Industrial Sensor Signal Conditioning, Audio Preamplifier and Buffering, Active Filters and Analog Control Loops, Motor and Actuator Drive Support, Battery-Powered Instrumentation, Compact Embedded Analog Interface.

🏭

Industrial Sensor Signal Conditioning

The LM358BIPWR fits low-level instrumentation because its common-mode input range includes ground, allowing signals near the lower supply rail to be sensed without an external level shift. The 3 V to 36 V supply range supports both compact battery-derived electronics and conventional industrial rails. Each internally compensated channel can amplify one sensor output or form the active stage of a filter. With 300 uA of quiescent current per channel and 1.2 MHz unity-gain bandwidth, it handles moderate-frequency process signals while keeping supply demand low. Confirm the sensor output range, offset accuracy, and required settling time before choosing the amplifier gain.

🎧

Audio Preamplifier and Buffering

The LM358BIPWR can condition weak audio or microphone signals where a 1.2 MHz unity-gain bandwidth is sufficient for the audible band and surrounding headroom. Its two independent channels allow one stage to amplify an input and the other to buffer a level-shifted signal. The common-mode input range including ground is useful for single-supply preamplifier designs. Designers should add the input and feedback resistors recommended by the manufacturer and confirm output swing against the selected supply. The 3 mV input offset specification should also be checked against the smallest signal the system must resolve.

🔧

Active Filters and Analog Control Loops

The LM358BIPWR is well suited to first-order active filters and low-frequency control loops because each channel is internally compensated and unity-gain stable. A 1.2 MHz unity-gain bandwidth provides ample closed-loop bandwidth for many process-control and analog-feedback applications while avoiding the need for external compensation. The dual configuration can implement a two-pole filter or separate two error amplifiers for control and monitoring. Component tolerances determine the achieved cutoff and gain accuracy. Validate stability, phase margin, output-current capability, and settling behavior in the final control loop rather than relying only on the open-loop bandwidth specification.

⚡

Motor and Actuator Drive Support

The LM358BIPWR can support low-power motor, solenoid, or actuator drive circuits by providing gain around external power transistors. Its 3 V to 36 V supply capability accommodates common control-voltage rails, while the common-mode input range including ground simplifies feedback sensing from the low side of a driver. The 1.2 MHz unity-gain bandwidth is suitable for many slow outer-loop control systems. Because the device is a general-purpose amplifier rather than a dedicated gate driver, the external transistor selection, flyback protection, thermal margin, and output-current requirements remain the primary design considerations.

🔋

Battery-Powered Instrumentation

The 300 uA-per-channel quiescent current of the LM358BIPWR helps limit standing power in battery-powered measurement equipment. Its supply range starts at 3 V, covering cells and regulators that operate below 5 V, while the 36 V maximum gives design headroom when the same amplifier family is used across industrial input stages. The common-mode input range including ground permits direct measurement of low-side sensor voltages. For duty-cycled systems, evaluate amplifier shutdown methods, input-bias contributions, leakage paths, and the accuracy drift over the operating temperature range before estimating battery life.

🧩

Compact Embedded Analog Interface

The LM358BIPWR provides two analog channels in an 8-pin TSSOP footprint, which is useful on space-constrained embedded boards requiring sensor amplification, thresholding, or actuator feedback. A 1.2 MHz unity-gain bandwidth supports moderate-speed conditioning while the 3 V to 36 V range allows the amplifier to sit behind a wide-range industrial input conditioning stage. The two channels share supply pins but operate independently, allowing a compact implementation without two separate single-amplifier packages. Place decoupling close to pin 8 and ground connection close to pin 4, route feedback traces away from switching nodes, and use the manufacturer layout guidance to minimize offset and stability problems.

What is the operating voltage range of LM358BIPWR?
The LM358BIPWR operates from 3 V to 36 V. According to the Texas Instruments LM358B product page, this supply range applies to the B version and allows the device to work from common 5 V and 12 V rails as well as higher industrial supply voltages. Designers must still verify that the selected output voltage leaves adequate headroom for the signal being amplified.
What are the key specifications of LM358BIPWR that engineers should know?
The LM358BIPWR is a dual operational amplifier with a 3 V to 36 V supply range, 1.2 MHz unity-gain bandwidth, 3 mV input offset voltage, and 300 uA quiescent current per channel. Texas Instruments describes it as a standard general-purpose amplifier in an 8-pin TSSOP package, rated for -40 °C to +85 °C operation. These characteristics position it between precision low-noise amplifiers and higher-speed general-purpose devices.
Where can I download the LM358BIPWR datasheet PDF?
The LM358BIPWR datasheet is available through the Texas Instruments LM358B product page at https://www.ti.com/product/LM358B/part-details/LM358BIPWR. That page links the orderable LM358BIPWR configuration and its technical documentation. The datasheet should be used for the complete pin-description table, recommended application circuit, electrical characteristics, and recommended PCB layout.
What is the LM358BIPWR pinout?
The LM358BIPWR uses the standard 8-pin TSSOP dual-amplifier arrangement: pins 1 and 7 are the two outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is ground, and pin 8 is the positive supply. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and confirming the exposed or lead configuration of the PW package.
Where can I buy LM358BIPWR online?
Use the Request a Quote form on this page to request LM358BIPWR pricing, current stock, and lead time from XAIPART. The part is an orderable 8-pin TSSOP configuration listed by Texas Instruments. A written quote is more useful than a historical catalog price because component pricing and inventory can change by date, volume, and packaging.
What is the price of LM358BIPWR?
Submit the LM358BIPWR part number in the Request a Quote form on this page for current pricing. Historical prices can differ from today’s quote because of inventory cycles, order volume, and manufacturer lead time. The quote request identifies the exact 8-pin TSSOP PW configuration, helping prevent confusion with LM358 variants offered in SOIC, DIP, or other package forms.
What is the lead time for LM358BIPWR?
Request the current LM358BIPWR lead time through the Request a Quote form on this page. Lead time depends on the manufacturer’s available inventory, incoming supply, and the volume ordered. Texas Instruments lists the LM358BIPWR as an orderable PW-package configuration, so its current availability should be confirmed directly for the production schedule.
Is LM358BIPWR in stock?
Current LM358BIPWR stock status should be confirmed through the Request a Quote form on this page. Texas Instruments lists LM358BIPWR as an orderable 8-pin TSSOP configuration, but inventory levels vary over time. Provide your required quantity, date code preference, and target delivery date with the request to obtain a useful availability response.
What can replace LM358BIPWR?
LM2902KPWR is the closest drop-in candidate identified in the same 8-pin TSSOP family because it offers the same dual-amplifier arrangement and supply range, although its bandwidth is lower. Exact substitution requires checking output swing, offset voltage, noise, stability, and the manufacturer pin table. Do not assume that a DIP-8 or SOIC-8 LM358 equivalent can replace this TSSOP footprint.
What is the best drop-in replacement for LM358BIPWR?
LM2902KPWR is the verified package-compatible option identified for the LM358BIPWR because both use an 8-pin TSSOP PW package and the conventional dual op-amp pin arrangement. It is not an electrically identical substitute: the LM2902 operates at lower bandwidth than the LM358B. Confirm signal-bandwidth requirements and output-swing headroom before approving a substitution.
Is LM358BIPWR suitable for industrial sensor conditioning?
Yes, LM358BIPWR is suitable for many industrial sensor-conditioning circuits because it supports a 3 V to 36 V supply range, includes ground in its common-mode input range, and draws 300 uA per channel. Its 1.2 MHz bandwidth is sufficient for low- and moderate-frequency conditioning. Higher-precision sensors may require tighter offset, drift, and noise specifications than the 3 mV offset rating.
When should I choose LM358BIPWR over LM2902KPWR?
Choose LM358BIPWR when signal bandwidth is the deciding requirement, because its 1.2 MHz unity-gain bandwidth is substantially higher than that of the lower-bandwidth LM2902 family. Both use the same 8-pin TSSOP footprint and conventional dual-op-amp pinout, so layout reuse is possible. Choose the LM2902 only after verifying its slower response still satisfies the signal and settling requirements.
How do LM358BIPWR and LM2902KPWR differ?
Both devices occupy the same 8-pin TSSOP PW package and use the conventional dual-op-amp pin arrangement, but their performance emphasis differs. The LM358BIPWR provides 1.2 MHz unity-gain bandwidth with a 3 mV offset specification, while the LM2902 family is a lower-bandwidth alternative. The exact LM2902KPWR ratings should be checked in its manufacturer datasheet before use.
What is the best onsemi equivalent for LM358BIPWR?
An onsemi cross-brand replacement for the LM358BIPWR could not be confirmed in the same 8-pin TSSOP PW package. Several general LM358 equivalents use DIP-8 or SOIC-8 packages, which are not drop-in replacements for a TSSOP footprint. Use a manufacturer pin-to-pin cross-reference and confirm the exact package before naming an onsemi substitute.
Does LM358BIPWR need external decoupling capacitors?
Yes, follow the manufacturer application circuit and place the recommended supply-decoupling capacitor close to the positive supply and ground pins. Good high-frequency bypassing helps the dual amplifier operate predictably when driving capacitive or switching-adjacent loads. The datasheet’s recommended layout should also guide placement of feedback components and the treatment of unused amplifier channels.

Справочные инженерные данные для LM358BIPWR — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose LM358BIPWR when the design needs two general-purpose amplifiers in an 8-pin TSSOP package, a 3 V to 36 V supply range, and enough bandwidth for moderate-frequency conditioning. Its 1.2 MHz unity-gain bandwidth, 300 uA-per-channel quiescent current, and common-mode input range including ground make it a practical choice for sensor interfaces, active filters, audio preamplifiers, and compact industrial control boards. LM2902KPWR is a package-compatible option when its lower-bandwidth performance still satisfies the signal path, but confirm offset, noise, output swing, and stability before substitution. Neither alternative should be selected solely from an LM358 family label; the package drawing and pin table must match. For designs needing lower offset, lower noise, faster settling, or rail-to-rail output, choose a different amplifier family rather than assuming the LM358B can meet those requirements.

Сравнение с аналогами

Параметр Этот товар LM2902KPWR
Brand Texas Instruments Texas Instruments
Package 8-pin TSSOP (PW) 8-pin TSSOP (PW) - same footprint
Number of Amplifiers 2 2
Amplifier Classification Standard general-purpose amplifier General-purpose dual operational amplifier

Ключевые отличия

  • Higher-bandwidth option within the same dual TSSOP pin arrangement (против LM2902KPWR)
  • Wide supply accommodation for industrial rails (против LM2902KPWR)
  • Low quiescent current with useful bandwidth (против LM2902KPWR)

Заметки по проектированию

Place the supply-decoupling capacitor immediately between the positive supply and ground pins, with the ground connection following the manufacturer’s recommended layout. Keep input, feedback, and output traces short and away from switching nodes. Because the TSSOP footprint is compact, route both channels independently and avoid sharing long feedback paths that could couple noise or settling behavior between channels.

Do not treat every LM358-equivalent package as a drop-in substitute. DIP-8 and SOIC-8 alternatives require different footprints and land patterns from the 8-pin TSSOP PW package. When substituting LM2902KPWR, verify its bandwidth, offset voltage, output swing, common-mode range, and stability against the original design. Also confirm that unused-channel inputs are connected according to the manufacturer guidance rather than left floating.

The 1.2 MHz unity-gain bandwidth is the small-signal limit, not a guarantee that a closed-loop design will preserve the same bandwidth. Set the closed-loop gain using the exact noise-gain equation, verify phase margin for capacitive loading, and check settling time for the intended step response. Keep the 3 mV input offset requirement in perspective when amplifying small sensor outputs, since resistor mismatch and bias-current error can dominate the usable accuracy.

Although the LM358BIPWR supports supplies up to 36 V, the maximum supply rating is not a design target for continuous operation. Include the supply tolerance, transients, and output-load requirements in the worst-case analysis. Verify that the external feedback network can discharge every internal node, and confirm the operating temperature against the -40 °C to +85 °C rating when the amplifier is installed away from a temperature-controlled enclosure.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The listed operating specifications do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. Use the manufacturer product documentation and current declarations for compliance confirmation.

Данные проверены: 2026-11-17 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

LM358BIPWR datasheet LM358BIPWR pinout LM358BIPWR datasheet pdf LM358BIPWR TSSOP-8 pinout Texas Instruments LM358BIPWR LM358BIPWR 36V 1.2MHz specifications LM358BIPWR equivalent LM358BIPWR replacement LM358BIPWR vs LM2902KPWR LM358BIPWR sensor signal conditioning LM358BIPWR active filter circuit LM358BIPWR price LM358BIPWR stock LM358BIPWR lead time LM358BIPWR dual op amp

Связанные компоненты & термины

Texas Instruments LM358BIPWR LM358B LM2902KPWR LM324KAPWR LM2902KNSR operational amplifier dual op amp analog integrated circuit signal-chain IC active filter sensor signal conditioning unity-gain bandwidth input offset voltage quiescent current common-mode input voltage range TSSOP-8 PW package surface mount industrial control audio preamplifier battery-powered instrumentation internal compensation single-supply operation
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ