Texas Instruments

LM556CMX - Dual 100 kHz Timer | Texas Instruments | SOIC-14

部品番号: LM556CMX ✗ 生産終了
6.6 MΩ Rds(on) 14-SOIC Package 100 kHz Speed
MOQ: 1 |

LM556CMX 概要

Texas Instruments LM556CMX is a dual timer and oscillator integrated circuit containing two independent timing sections in a 14-pin SOIC package. Each section can generate accurate time delays or oscillations using external timing resistors and capacitors, allowing one package to support two timing functions. The device is identified as a commercial-grade dual timer with a nominal 100 kHz timing-frequency rating and a narrow SOIC body measuring 0.154 inch, or 3.90 mm, in width.

A dual timer such as the LM556CMX belongs to the timer and oscillator class of clock-and-timing semiconductors. Within that category, it extends the familiar 555 timer architecture into two independent channels. Each channel combines an external timing network with internal threshold, trigger, discharge, output, and control functions, making the device useful for monostable pulse generation, astable oscillation, delay circuits, and periodic control functions.

The two timing sections operate independently, allowing different delay intervals or frequencies to be produced within one device. This integration can reduce the component count in systems requiring two related timing functions. Both sections use external resistor-capacitor timing networks, so component tolerance and parasitics directly influence timing accuracy. The SOIC-14 surface-mount package supports compact PCB construction and automated assembly.

LM556CMX is associated with the classic bipolar 555-family implementation. The bipolar approach uses conventional transistor structures within the integrated circuit, while the external timing network determines the principal delay or oscillation period. Designers should account for supply voltage, temperature, resistor tolerance, capacitor tolerance, output load, and discharge-device behavior when determining whether a timing design meets its accuracy requirement.

Typical applications include dual one-shot pulse generation, dual astable oscillators, industrial sequence timers, delayed relay or gate triggering, periodic pulse generation, and general-purpose control logic in test equipment. The 100 kHz nominal classification makes it appropriate for moderate-speed timing functions rather than high-frequency precision waveform generation.

Design the timing resistors and capacitors so the selected operating mode remains within the device's allowed discharge and timing limits. Keep the timing node connections short, provide adequate bypassing near the supply pins, and validate operation across temperature and supply-voltage tolerances. The SOIC footprint also requires attention to solder-joint inspection and analog-noise coupling when the device controls sensitive timing or measurement circuits.

This product page consolidates the LM556CMX package information, 100 kHz timer classification, functional context, drop-in alternatives, comparison parameters, and practical design guidance. It provides engineering context beyond a basic catalog entry while directing buyers to the Request a Quote form for current commercial terms.

ドロップイン代替品: LM556CMX — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LM556CMX (同一形状・フットプリント).

Fairchild Semiconductor
比較対象 LM556CMX →

LM556CM

✅ ドロップイン ⚠️ 仕様未検証
Fairchild Semiconductor
📦 14-SOIC
555 Type, Timer/Oscillator (Dual) IC · 2 sections · Astable and monostable · 4.5 V to 16 V · 3 MHz · TTL compatible · Available · Available

価格はお問い合わせください

データシートを見る →

TLC556IP

✅ ドロップイン ⚠️ 仕様未検証
📦 14-SOIC
Same 14-SOIC dual-timer footprint, but CMOS implementation can differ in trigger thresholds and frequency capability from the 100 kHz LM556CMX

📋 参考代替品(カタログ未掲載)

LMC556IP

✅ ドロップイン ⚠️ 仕様未検証
📦 14-SOIC
Same 14-SOIC dual-timer footprint, but CMOS implementation can differ from the LM556CMX's 100 kHz bipolar timing behavior

📋 参考代替品(カタログ未掲載)

NE556DR

✅ ドロップイン
📦 14-SOIC
Same 14-SOIC dual-timer footprint and pin configuration, while the NE556 family's frequency rating differs from the LM556CMX's 100 kHz classification

📋 参考代替品(カタログ未掲載)

SE556J

✅ ドロップイン
📦 14-SOIC
Same 14-SOIC dual-timer function and pin arrangement, with a 100 kHz-class bipolar implementation and no measured parameter difference stated

📋 参考代替品(カタログ未掲載)

LM556CMX 仕様

Timer Configuration Dual independent timer sections
Timing Functions Monostable and astable operation
Nominal Maximum Timing Frequency 100 kHz
パッケージ 14-SOIC
Package Width 0.154 in (3.90 mm)
Number of Terminals 14
実装タイプ Surface mount
Output Waveform Pulse and rectangular
Temperature Grade Commercial
Timing Network External resistor and capacitor
Maximum Total Timing Resistance at 5 V 6.6 MΩ
Absolute Maximum Total Timing Resistance 20 MΩ

LM556CMX ピン構成

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
ピン 1 DISCHARGE — Discharge terminal for timer section 1
ピン 2 THRESHOLD — Threshold input for timer section 1
ピン 3 TRIGGER — Trigger input for timer section 1
ピン 4 OUTPUT — Timer output for timer section 1
ピン 5 RESET — Reset input for timer section 1
ピン 6 CONTROL VOLTAGE — Control-voltage input for timer section 1
ピン 7 GROUND — Ground connection for timer section 1
ピン 8 TRIGGER — Trigger input for timer section 2
ピン 9 OUTPUT — Timer output for timer section 2
ピン 10 RESET — Reset input for timer section 2
ピン 11 CONTROL VOLTAGE — Control-voltage input for timer section 2
ピン 12 GROUND — Ground connection for timer section 2
ピン 13 THRESHOLD — Threshold input for timer section 2
ピン 14 DISCHARGE — Discharge terminal for timer section 2

主な用途

LM556CMX の用途: 6 件s: Dual Monostable Pulse Generator, Dual Astable Oscillator, Industrial Sequence and Delay Control, Test and Measurement Trigger Circuit, Power-Control Delay and Interlock, Automotive or Robotics Accessory Timing.

⚡

Dual Monostable Pulse Generator

The LM556CMX is appropriate for generating two independent delayed output pulses because each timer section can use its own external resistor-capacitor timing network. Its nominal 100 kHz classification suits moderate-speed pulse timing, while the 14-SOIC package keeps the two channels compact on a PCB. The external timing components determine the delay, so their tolerances and temperature coefficients directly influence pulse-width accuracy. Because the two sections operate independently, separate delay intervals can be produced without adding a second timer package. Designers should calculate each timing network against the applicable resistance limit, including the 6.6 MΩ maximum for 5 V operation, and verify reset, trigger, and output behavior on the assembled board.

🌐

Dual Astable Oscillator

The two independent LM556CMX timing sections can form separate astable oscillators for repeated square-wave generation, clocking, or periodic control. The 100 kHz nominal device classification accommodates many industrial timing and pulse-generation tasks, while the 14-SOIC footprint reduces the space required for two channels. Each oscillator requires its own resistor and capacitor network, making it possible to create different frequencies or duty cycles on the two channels. Designers should verify maximum timing resistance, capacitor ESR effects, output loading, and frequency stability across temperature. Short PCB traces and local supply bypassing help the oscillator maintain predictable timing and reduce coupling into adjacent analog or control circuitry.

🏭

Industrial Sequence and Delay Control

LM556CMX can implement two stages of an industrial sequence, such as a delay timer followed by a second timed pulse or an asynchronous delay block. Each section operates independently and can be triggered by another control signal, providing more flexibility than using a single-channel timer. The commercial-grade 14-SOIC package supports compact controller boards, while the nominal 100 kHz classification indicates suitability for timing intervals rather than high-speed waveform work. Engineers should define the trigger polarity, reset behavior, and allowed timing drift for the controlled process. Testing should cover worst-case resistor and capacitor tolerances, supply variation, temperature, and relay or load transients before the timer drives production equipment.

🖥️

Test and Measurement Trigger Circuit

The LM556CMX can create adjustable trigger delays, gate intervals, or repetitive test pulses for bench instruments and automated test systems. Two independent timer channels allow one section to arm a test event while the other establishes a related interval. Its 14-SOIC package occupies little board area, and the 100 kHz nominal classification is suitable for general-purpose timing rather than precision signal generation. For measurement accuracy, keep the timing network away from high-impedance inputs and switching nodes, and observe output loading when driving external circuitry. A scope measurement across the timing capacitor during expected supply and temperature variation is an effective way to confirm the final delay against the design requirement.

🔧

Power-Control Delay and Interlock

The LM556CMX can provide delayed enable, interlock, or relay-control pulses in power systems where a fixed startup interval is required. One channel may delay a power-enable command while the second monitors or times a related transition. Its dual-channel 14-SOIC implementation reduces component count, and the nominal 100 kHz timing classification is appropriate for millisecond-to-moderate-frequency control functions. Because timer outputs can switch abruptly, design the external drive stage and protection network independently. Validate tolerance stack-up, reset states, and failure-mode behavior for every operating condition; a timer should not be the only protection element for a high-energy load or safety-critical function.

🤖

Automotive or Robotics Accessory Timing

LM556CMX can support non-safety-critical timing functions in robotics, automotive accessories, and equipment-control modules, such as delayed relay operation, periodic indicator flashing, or debounce timing. Its two independent timer channels permit compact implementation of multiple simple timing tasks, and the 14-SOIC package is compatible with surface-mount assembly. The commercial temperature grade must be checked against the actual environmental requirement; it is not automatically an automotive-qualified selection. Designers should account for supply transients, temperature-induced timing variation, output drive, and the possibility of electromagnetic coupling. If the timing function affects vehicle motion, braking, steering, or other safety-related behavior, use an appropriately qualified timer and complete the required system safety analysis.

おすすめ製品の概要

NE556DR Pin-compatible dual-timer alternative 使用用途: Dual Monostable Pulse Generator, Industrial Sequence and Delay Control, Power-Control Delay and Interlock LMC556IP Dual-timer alternative for design review 使用用途: Dual Monostable Pulse Generator, Test and Measurement Trigger Circuit, Automotive or Robotics Accessory Timing SE556J Bipolar 14-SOIC dual-timer alternative 使用用途: Dual Astable Oscillator, Power-Control Delay and Interlock TLC556IP CMOS 14-SOIC dual-timer alternative 使用用途: Dual Astable Oscillator, Test and Measurement Trigger Circuit LM556CM Fairchild Semiconductor 使用用途: Industrial Sequence and Delay Control, Automotive or Robotics Accessory Timing
What is the LM556CMX?
The LM556CMX is a Texas Instruments dual timer and oscillator IC containing two independent timing sections in a 14-pin SOIC package. According to the manufacturer datasheet, each section can produce accurate time delays or oscillations with an external timing resistor and capacitor. Its dual-channel architecture reduces board area when a design needs two separate delay, one-shot, or astable timing functions.
What are the key specifications of LM556CMX that engineers should know?
The LM556CMX combines two independent timer sections, a nominal 100 kHz timing-frequency classification, and a 14-SOIC package measuring 0.154 inch, or 3.90 mm, in width. According to the manufacturer datasheet, each channel uses an external resistor-capacitor timing network and can operate as a delay, monostable, or astable circuit. The two timing sections operate independently.
How does the LM556CMX timer work?
The LM556CMX establishes each delay or oscillation period through external timing resistors and capacitors connected to its timing terminals. According to the manufacturer datasheet, each of the two timer sections operates independently and provides threshold, trigger, discharge, output, reset, and control functions. Component tolerance, supply variation, and temperature can affect the resulting timing accuracy.
What is the LM556CMX pinout?
The LM556CMX uses a 14-pin SOIC layout with two mirrored timer sections. Pins 1 through 7 provide discharge, threshold, trigger, output, reset, control voltage, and ground for the first section, while pins 8 through 14 provide the corresponding functions for the second section. Use the manufacturer datasheet pin-description table when assigning PCB tracks and test points.
Where can I download the LM556CMX datasheet PDF?
The LM556CMX datasheet PDF can be reached through the product document linked on this page. According to the National Semiconductor document, the device is a dual timing circuit with external timing networks and includes specific maximum total timing-resistance limits. Use that document to verify pin functions, operating conditions, application circuits, and electrical characteristics before releasing a PCB design.
What can replace the LM556CMX?
The LM556CMX can be replaced by a pin-compatible 14-pin SOIC dual timer when the replacement meets the circuit's timing, output, supply-voltage, and temperature requirements. Suitable candidates identified for comparison include NE556DR, SE556J, TLC556IP, and LMC556IP. Each candidate must be checked against the manufacturer datasheet because timer family members can differ in process technology and timing limits.
Is NE556DR a drop-in replacement for LM556CMX?
NE556DR is a pin-compatible 14-pin SOIC alternative to the LM556CMX, but it should be treated as an engineering replacement rather than an automatic substitution. The LM556CMX is classified at 100 kHz, while the replacement's operating range and electrical details must be confirmed from its datasheet. Check output drive, supply limits, trigger and reset thresholds, and timing tolerance.
LM556CMX vs NE556DR: which is better for a dual delay circuit?
Choose the LM556CMX when its 100 kHz classification and established bipolar behavior match a legacy dual-delay design. Choose NE556DR when a second-source SOIC-14 dual timer is needed and its verified electrical limits fit the design. According to the LM556CMX manufacturer datasheet, both timer sections are independent; the replacement should be checked for threshold, output, and supply differences.
When should I choose LM556CMX instead of a CMOS dual timer?
Choose the LM556CMX when an established bipolar dual-timer design requires compatibility with an existing LM556-family footprint and application circuit. It contains two independent sections in a 14-SOIC package and is classified at 100 kHz. Choose a CMOS alternative only after checking trigger levels, output voltage swings, maximum frequency, supply range, and timing accuracy.
Is LM556CMX suitable for astable oscillator and monostable circuits?
The LM556CMX is suitable for astable oscillator and monostable delay functions because each section can use an external resistor-capacitor timing network. According to the manufacturer datasheet, the two timer sections operate independently. The maximum total resistance is 20 MΩ, while the limit for 5 V operation is 6.6 MΩ, which constrains the timing-network design.
Where can I buy LM556CMX online?
Use the Request a Quote form on this page to request current LM556CMX commercial terms, stock confirmation, and lead time. The exact suffix identifies the 14-SOIC device in a commercial temperature grade. Buyers should state the required quantity, reel or tube preference, and target delivery location when submitting the request so the order can be reviewed accurately.
What is the price of LM556CMX?
Current LM556CMX pricing depends on order quantity, packaging preference, and market conditions. Use the Request a Quote form on this page for a current quotation tied to the exact 14-SOIC MPN. The form is the appropriate route for confirming unit pricing, quantity breaks, stock status, and any applicable traceability or delivery requirements.
What is the lead time for LM556CMX?
The current lead time for LM556CMX should be confirmed through the Request a Quote form on this page because it can change with inventory and manufacturing conditions. Include the required quantity and packaging format in the request. The part is identified specifically as LM556CMX, a commercial-grade dual timer in a 14-SOIC package, so the quotation should preserve that exact suffix.
Is LM556CMX in stock?
Stock status for the exact LM556CMX should be confirmed through the Request a Quote form on this page. Use the exact manufacturer part number when requesting availability rather than accepting a generic LM556-family listing. Include the required quantity, delivery schedule, and packaging preference so the response can distinguish an orderable production quantity from a limited allocation.
What is the best cross-brand equivalent for LM556CMX?
The NE556DR is a cross-brand 14-SOIC dual timer commonly considered when an established LM556-class design needs an alternate source. According to the manufacturer datasheet, the LM556CMX has two independent timer sections and a 100 kHz classification. Before replacing it, verify supply voltage, trigger thresholds, output drive, reset behavior, and maximum frequency against the NE556DR datasheet.
Does LM556CMX meet RoHS and automotive qualification requirements?
RoHS, REACH, and automotive-qualification status must be confirmed from the current manufacturer documentation or project compliance records; they are not established by the basic LM556CMX catalog description. The device is identified as a commercial-grade 14-SOIC dual timer. For automotive or other regulated production, obtain the applicable declaration and qualification evidence before approving the part.

エンジニアリング参考データ: LM556CMX — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the LM556CMX for an established dual-delay or dual-oscillator design that specifies bipolar 555-family behavior, a 100 kHz-class timing range, and a 14-SOIC footprint. Its two independent sections are useful when one package must produce two different timing intervals. Choose LM556CM when the same electrical configuration is needed under a different ordering code. Consider TLC556IP or LMC556IP only for low-power CMOS designs after checking trigger levels, output voltage, frequency, and timing accuracy. NE556DR is a cross-brand alternative for second sourcing, while SE556J is a bipolar-family option. Because the alternatives may differ in threshold voltage, discharge behavior, output drive, supply limits, and temperature grade, none should be substituted solely because the package matches. Use the Request a Quote form for the exact LM556CMX and submit the required quantity, packaging preference, and delivery schedule.

代替品との比較

パラメータ この製品 LM556CM TLC556IP LMC556IP NE556DR SE556J
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics Signetics
Package 14-SOIC 14-SOIC - same 14-SOIC - same 14-SOIC - same 14-SOIC - same 14-SOIC - same
Timer Configuration Dual independent timer Dual independent timer Dual timer Dual timer Dual timer Dual timer
Number of Terminals 14 14 14 14 14 14

主な差別化要因

  • Established bipolar dual-timer behavior (vs TLC556IP)
  • Two independent timing sections (vs NE556DR)
  • Direct same-family ordering path (vs LM556CM)

設計ノート

Do not treat every NE556, TLC556, or LMC556 variant as an automatic replacement. The LM556CMX is a commercial-grade, 100 kHz-class bipolar dual timer in a 14-SOIC package, while CMOS-family alternatives can present different trigger thresholds, output swing, supply limits, and timing characteristics. Preserve the exact 14-SOIC footprint, then compare the replacement datasheet with the installed circuit before releasing a new PCB.

Place each timing resistor and capacitor close to its corresponding threshold, trigger, and discharge pins, and keep the timing nodes away from switching nodes and high-current return paths. The two timer sections share a package but can use separate timing networks. Route the reset and control-voltage pins carefully because external noise or unintended bias can alter timer behavior. Provide a low-impedance ground connection and place supply bypassing near the device.

Calculate the timing network within the documented resistance limits: the absolute maximum total resistance is 20 MΩ, and the maximum is 6.6 MΩ for 5 V operation. High resistance values reduce noise immunity and increase sensitivity to leakage and PCB contamination. Select resistor and capacitor tolerances according to the required delay accuracy, then verify timing over the full supply-voltage and temperature range rather than relying only on nominal component values.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The part is identified as a commercial-grade 14-SOIC dual timer. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer or project compliance documentation.

関連検索

LM556CMX datasheet LM556CMX pinout LM556CMX datasheet pdf LM556CMX equivalent LM556CMX replacement LM556CMX cross reference LM556CMX price LM556CMX stock Texas Instruments LM556CMX LM556CMX SOIC-14 footprint LM556CMX dual timer application LM556CMX vs NE556DR

関連部品&用語

Texas Instruments National Semiconductor LM556CMX LM556CM TLC556IP LMC556IP NE556DR SE556J dual timer timer and oscillator clock and timing IC 555 timer bipolar timer CMOS timer astable oscillator monostable multivibrator timing resistor timing capacitor threshold input trigger input discharge terminal control voltage 14-SOIC SOIC family surface-mount package 100 kHz 20 MΩ 6.6 MΩ
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示