ROHM Semiconductor

LMR822F-GE2 - Dual 5.5MHz RRO Op Amp | ROHM Semiconductor

部品番号: LMR822F-GE2 ✓ 生産中
2.5 V to 5.5 V Vdss 8-SOP Package
MOQ: 1 |

LMR822F-GE2 概要

ROHM Semiconductor LMR822F-GE2 is a dual, rail-to-rail output operational amplifier designed for low-voltage operation from 2.5 V to 5.5 V, with a gain-bandwidth product of 5.5 MHz and a slew rate of 2 V/us. The device is packaged in an 8-SOP and combines two amplifier channels in one package. Its rail-to-rail output, full-swing operating characteristics, low supply-current consumption, high voltage gain, and high slew rate make it suitable for compact analog signal chains.

An operational amplifier is a voltage-feedback amplifier used to amplify, buffer, filter, or control analog signals. The LMR822F belongs to the general-purpose operational-amplifier family within analog ICs and the broader signal-conditioning hierarchy. In portable battery-powered equipment, a low-voltage dual amplifier can process two signals or implement a differential stage while reducing package count and board area compared with two single amplifiers.

The LMR822F's 5.5 MHz gain-bandwidth product supports closed-loop operation at moderate signal frequencies, while its 2 V/us slew rate improves large-signal response. Rail-to-rail output operation allows the output to approach the available supply rails more closely than a conventional fixed-output amplifier, which is useful when signal headroom is limited. Low supply-current consumption further supports mobile and other battery-powered applications.

The dual-channel architecture provides two amplifiers in one 8-SOP package. Each channel can be configured as an inverting amplifier, non-inverting amplifier, voltage follower, comparator-like interface, or active-filter stage, subject to the stability, common-mode, and output-swing limits in the manufacturer datasheet. This flexibility makes the device useful in active filters, sensor interfaces, touch-screen control, audio signal conditioning, and low-voltage industrial systems.

Typical applications include portable audio input stages, resistive touch-sensing channels, buffered sensor outputs, active low-pass filters, and low-voltage industrial control boards. The 2.5 V minimum supply supports systems operating from a regulated 3.3 V rail, while the 5.5 V maximum supply accommodates 5 V analog rails. Engineers should confirm frequency, gain, output swing, input range, noise, and stability requirements for the intended configuration.

For dependable implementation, keep input and feedback connections short, place compensation or filter components close to the relevant pins, and avoid operating the amplifier beyond its stated 2.5 V to 5.5 V supply range. Verify each channel independently because dual packages share common supply and ground connections.

This product page combines the manufacturer's core operating specifications with application guidance, package information, sourcing support, and an engineering comparison of relevant alternatives. It helps designers identify whether the LMR822F-GE2's dual 5.5 MHz architecture is suitable before beginning PCB implementation.

ドロップイン代替品: LMR822F-GE2 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LMR822F-GE2 (同一形状・フットプリント) — 相違点: Package.

ROHM Semiconductor
Package: 14-SOIC, 4.40 mm body width
比較対象 LMR822F-GE2 →

LMR821G-GE2

✅ ドロップイン ⚠️ 仕様未検証
📦 8-SOP
Same-family single-channel focus rather than the target's dual 5.5 MHz configuration; channel count differs by 1 circuit, while the exact voltage gain requires verification

📋 参考代替品(カタログ未掲載)

LMR824F-GE2

✅ ドロップイン ⚠️ 仕様未検証
ROHM Semiconductor
📦 8-SOP
Single-supply operational amplifier · 4 circuits · 2.5 V to 5.5 V · 26 mA · 30 nA · Rail-to-rail, full-swing output

価格はお問い合わせください

データシートを見る →

LMR822G-GE2

✅ ドロップイン ⚠️ 仕様未検証
📦 8-SOP
Same 8-SOP family and dual-amplifier architecture, but the G-variant gain and dynamic specifications differ from the F-variant

📋 参考代替品(カタログ未掲載)

LMR822F-GE2 最大定格&電気的特性

Number of Amplifier Channels 2 circuits
Supply Voltage Range 2.5 V to 5.5 V
Gain-Bandwidth Product 5.5 MHz
Slew Rate 2 V/us
Output Architecture Rail-to-rail output
動作温度範囲 -40 C to +85 C
パッケージ 8-SOP
実装タイプ Surface mount
Device Classification Standard general-purpose amplifier
Output Swing Full swing
RoHS ステータス unknown
REACH Status unknown
AEC-Q100 Qualification unknown

LMR822F-GE2 8-sop ピン配置ガイド

LMR822F-GE2 (8-sop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

LMR822F-GE2 の 8-sop パッケージピン配置図

詳細なピン配置データはありません: LMR822F-GE2.

詳細は データシート をご参照ください。

主な用途

LMR822F-GE2 の用途: 6 件s: Portable Audio Signal Conditioning, Resistive Touch Sensing, Low-Voltage Active Filters, Battery-Powered Sensor Buffering, Industrial Control Interfaces, Low-Voltage Data Acquisition.

🎧

Portable Audio Signal Conditioning

The LMR822F-GE2 fits portable audio signal-conditioning stages because each channel can provide gain and buffering within a 2.5 V to 5.5 V supply system. Its 5.5 MHz gain-bandwidth product supports signals well above most low-rate audio bandwidths, while the 2 V/us slew rate helps maintain low distortion when processing moderate-amplitude transients. The dual 8-SOP package reduces board area by combining two amplifier functions in one component. Rail-to-rail output operation provides useful signal swing on a 3.3 V rail, although the design must remain within the datasheet's output-voltage and load-current limits.

📱

Resistive Touch Sensing

The LMR822F-GE2 can support two resistive touch-sensing channels because it contains two amplifier channels and operates from a low 2.5 V minimum supply. The 5.5 MHz gain-bandwidth product is adequate for processing touch-controller signals within an active-filter or buffer stage, and the 2 V/us slew rate provides a responsive transition capability. Rail-to-rail output behavior is useful when the controller must exercise a narrow voltage range near the supply rails. Touch-system performance still depends on electrode resistance, noise, settling time, and the specific sensor-front-end topology.

🔧

Low-Voltage Active Filters

The LMR822F-GE2 is appropriate for active-filter implementations where two amplifier sections are required in an 8-SOP package. Its 5.5 MHz gain-bandwidth product provides bandwidth above the operating range of many low-frequency sensor filters, while the 2 V/us slew rate supports signal transitions that are more demanding than a slow-precision filter alone would require. The 2.5 V to 5.5 V supply range allows operation from common low-voltage rails. Component selection must preserve loop gain and stability at the target closed-loop gain, including the effect of the amplifier output impedance and load capacitance.

🧩

Battery-Powered Sensor Buffering

The LMR822F-GE2 suits battery-powered sensor buffering because its low-voltage operation begins at 2.5 V and its dual-channel configuration can condition two sensor outputs in one package. The 5.5 MHz gain-bandwidth product provides ample bandwidth for common temperature, pressure, and resistive sensors, while the 2 V/us slew rate allows the amplifier to follow sensor transitions with limited distortion. Low supply-current consumption is explicitly identified as a product feature, making power budget an important selection criterion. The final design should account for sensor excitation, input offset, noise, and the load presented to the source.

🏭

Industrial Control Interfaces

The LMR822F-GE2 can serve as a dual amplifier in compact industrial control interfaces that operate from 2.5 V to 5.5 V. One channel may buffer a sensor input while the other amplifies a feedback or control signal, and the 8-SOP package limits board-space demand. Its 5.5 MHz gain-bandwidth product and 2 V/us slew rate provide useful dynamic performance for control signals and active filtering. Because industrial environments may contain fast transients, the amplifier should be paired with suitable input protection, grounding, and filtering, while maintaining its specified operating temperature of -40 C to +85 C.

🖥️

Low-Voltage Data Acquisition

The LMR822F-GE2 is suitable for conditioning two low-voltage acquisition channels in compact data-conversion systems. Its 5.5 MHz gain-bandwidth product can support anti-alias or active-filter stages ahead of a converter, and the 2 V/us slew rate helps reproduce moderate-amplitude input transitions without requiring a larger high-speed amplifier. Rail-to-rail output behavior is advantageous when converter input ranges make efficient use of a 3.3 V or 5 V analog rail. The actual signal-chain bandwidth must remain comfortably below the closed-loop limits of the selected gain configuration.

What is the operating voltage of LMR822F-GE2?
The LMR822F-GE2 operates from 2.5 V to 5.5 V. According to the ROHM Semiconductor product datasheet, this supply range supports low-voltage analog systems operating from 2.5 V, 3.3 V, or 5 V rails. The dual amplifier should be powered only within the specified range, and the sum of the supply and ground voltages must remain below the device's absolute-maximum limit.
What are the key specifications of LMR822F-GE2 that engineers should know?
The LMR822F-GE2 is a dual operational amplifier with a 2.5 V to 5.5 V supply range, 5.5 MHz gain-bandwidth product, 2 V/us slew rate, and rail-to-rail output operation. The manufacturer identifies it as a low-power, full-swing amplifier for mobile equipment, low-voltage systems, and active filters. It is housed in an 8-SOP package with an operating range of -40 C to +85 C.
How many operational amplifiers are in LMR822F-GE2?
The LMR822F-GE2 contains two independent operational-amplifier channels in one 8-SOP package. Each channel can be used for standard analog signal-conditioning functions, provided its input, output, gain, and stability requirements are satisfied. Using two channels in one package simplifies routing and can reduce board area in portable or low-voltage equipment.
What is the gain-bandwidth product of LMR822F-GE2?
The LMR822F-GE2 has a gain-bandwidth product of 5.5 MHz. According to the ROHM Semiconductor product information, this bandwidth suits low-voltage general-purpose amplification and active-filter applications. Actual closed-loop bandwidth also depends on the selected gain and the manufacturer-recommended feedback and compensation network.
What is the slew rate of LMR822F-GE2?
The LMR822F-GE2 provides a slew rate of 2 V/us. The manufacturer describes this high slew rate as useful for low-voltage, full-swing output operation. Slew rate matters when the amplifier must drive a large voltage change quickly, although output-current capability, load impedance, and supply voltage also influence the resulting large-signal response.
Where to download the LMR822F-GE2 datasheet PDF?
The official LMR822F-GE2 product and datasheet information is available on the ROHM Semiconductor product page. Open the linked product page and select the LMR822F document from its datasheet or document resources. Use the manufacturer's document for the definitive pin description, electrical characteristics, absolute-maximum ratings, and recommended application circuits.
Where can I find the LMR822F-GE2 pinout?
The LMR822F-GE2 pinout is identified in the manufacturer's datasheet and package information for the 8-SOP version. Use the pin-description table and package drawing when assigning the two amplifier channels, supply pins, and ground connections. Before routing a PCB, also verify the exact suffix and mechanical drawing associated with LMR822F-GE2.
Is LMR822F-GE2 suitable for active filters?
Yes, the LMR822F-GE2 is suitable for active-filter stages because ROHM identifies active filters as a target application and specifies a 5.5 MHz gain-bandwidth product with 2 V/us slew rate. The filter topology, resistance, capacitance, signal amplitude, and permitted gain must satisfy the amplifier's stability and output-swing limits. Each dual channel may support one filter section.
Where to buy LMR822F-GE2 online?
Use the Request a Quote form on this XAIPART product page to request LMR822F-GE2 availability, lead time, and order details. Quote requests allow procurement teams to confirm the exact suffix, package, delivery quantity, and current supply status without relying on a static listing. Provide the required quantity and target delivery date in the request.
What is the price of LMR822F-GE2?
Use the Request a Quote form on this page for the current LMR822F-GE2 price. The quote can reflect the requested quantity, package suffix, and current supply conditions. Because component pricing and availability change, a live quotation is more reliable than a static price reference for production planning or purchasing.
What is the lead time for LMR822F-GE2?
Submit a Request a Quote with your required quantity, date code requirements, and target delivery date to obtain the current lead time for LMR822F-GE2. Lead time can vary with order volume, packaging, inventory position, and manufacturing conditions. Confirming the result before committing a production schedule avoids relying on an outdated availability estimate.
LMR822F-GE2 vs LMR824F-GE2: which is better for an active filter?
The LMR822F-GE2 and LMR824F-GE2 belong to the same ROHM low-voltage, full-swing amplifier family and use the same 8-SOP class of package, but their electrical details should be checked before substitution. The LMR822F provides 5.5 MHz gain-bandwidth product and 2 V/us slew rate. Choose LMR822F for designs whose filter requirements match those specifications and the manufacturer pinout.
When should I choose LMR822F-GE2 over LMR821G-GE2?
Choose LMR822F-GE2 when a dual 8-SOP amplifier with 5.5 MHz gain-bandwidth product and 2 V/us slew rate closely matches the signal bandwidth and transition requirements. Consider LMR821G-GE2 only after comparing its exact gain, bias, offset, noise, stability, and package details. The appropriate choice is determined by the complete analog specification, not package similarity alone.
What can replace LMR822F-GE2?
A drop-in replacement should use the same 8-SOP footprint, preserve the amplifier pin assignments, and provide comparable gain-bandwidth product, slew rate, supply range, input range, output swing, and stability behavior. ROHM family candidates such as LMR821G-GE2 and LMR824F-GE2 may be considered after datasheet verification. Request a Quote for the exact replacement and traceability requirements.
Is LMR822F-GE2 still active?
The LMR822F-GE2 is treated as active because the official ROHM Semiconductor product page remains available and current distributor listings identify the device for sourcing. Lifecycle status can still change by region or order code. Confirm lifecycle, longevity, and supply commitments through the Request a Quote form before beginning a long-life or safety-related production program.

エンジニアリング参考データ: LMR822F-GE2 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose LMR822F-GE2 for a dual, low-voltage signal-conditioning design that uses a 2.5 V to 5.5 V rail and requires a specified 5.5 MHz gain-bandwidth product with 2 V/us slew rate. Its dual 8-SOP construction is especially useful when two independent amplifier channels are required in a compact board. Consider LMR821G-GE2 only when one channel is sufficient and its detailed electrical characteristics provide a better fit. Consider LMR824F-GE2 when its gain-bandwidth and slew-rate values better match the required signal bandwidth. LMR822G-GE2 is relevant when its gain version matches the feedback network better. For every candidate, verify the manufacturer pinout, input common-mode range, output swing, stability, noise, offset, and power consumption; a shared 8-SOP outline alone does not establish drop-in compatibility.

代替品との比較

パラメータ この製品 LMR821G-GE2 LMR824F-GE2 LMR822G-GE2
Package 8-SOP 8-SOP 8-SOP 8-SOP
Brand ROHM Semiconductor ROHM Semiconductor ROHM Semiconductor ROHM Semiconductor
Amplifier Channels 2 circuits 1 circuit 2 circuits 2 circuits
Supply Voltage Range 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V
Output Architecture Rail-to-rail output Full-swing output Rail-to-rail output Rail-to-rail output

主な差別化要因

  • Combines two amplifier channels in one low-voltage package (vs LMR821G-GE2)
  • Provides a defined 5.5 MHz gain-bandwidth product and 2 V/us slew rate (vs LMR824F-GE2)
  • Operates across common low-voltage rails with rail-to-rail output (vs LMR822G-GE2)

設計ノート

Use short, direct routing for each amplifier's input and feedback components. A 5.5 MHz gain-bandwidth product gives useful bandwidth, but parasitic capacitance and long feedback traces can alter phase margin, particularly at high closed-loop gain. Keep sensitive inputs away from power-supply nodes and switching nodes, and place filter or compensation components close to the associated pins.

Decouple the 2.5 V to 5.5 V supply close to the 8-SOP with a local ceramic bypass capacitor and adequate bulk capacitance for the board's load transients. Because both amplifier channels share the same package supplies, supply disturbance can affect both channels simultaneously. Verify ground-return paths so output-current flow does not add noise to the input-reference voltage.

Do not assume that a matching 8-SOP footprint guarantees a functional substitution. Before using LMR821G-GE2, LMR824F-GE2, or LMR822G-GE2, verify pin assignments, amplifier-channel count, input common-mode range, output swing, offset voltage, bias current, noise, gain, stability, and absolute-maximum ratings against the target design.

Treat the two channels as separate analog paths even though they share one package and supply. Maintain symmetrical grounding where channel matching matters, avoid routing one channel's output near the other channel's high-impedance input, and test each amplifier independently. Rail-to-rail output behavior provides more signal range on low-voltage rails, but the usable range still depends on load current and output swing.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

ROHM declarations or qualification records were not present in the cited product information, so each compliance field remains unknown pending manufacturer documentation.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

LMR822F-GE2 datasheet LMR822F-GE2 pinout LMR822F-GE2 datasheet pdf LMR822F-GE2 equivalent LMR822F-GE2 replacement LMR822F-GE2 cross reference LMR822F-GE2 vs LMR824F-GE2 ROHM LMR822F-GE2 LMR822F-GE2 5.5MHz operational amplifier LMR822F-GE2 8-SOP pinout LMR822F-GE2 active filter LMR822F-GE2 price LMR822F-GE2 stock LMR822F-GE2 rail to rail output

関連部品&用語

ROHM Semiconductor LMR822F-GE2 LMR821G-GE2 LMR824F-GE2 LMR822G-GE2 Operational Amplifier Op Amp Voltage-Feedback Amplifier Analog IC Signal-Conditioning IC Rail-to-Rail Output Gain-Bandwidth Product Slew Rate Full-Swing Output Active Filter Low-Voltage Amplifier Low Supply Current 8-SOP SOIC Family Surface Mount Portable Electronics Battery-Powered Equipment Resistive Touch Sensing Industrial Control Data Acquisition
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示