LMR822F-GE2 - Dual 5.5MHz RRO Op Amp | ROHM Semiconductor
MPN: LMR822F-GE2 ✓ 啟用中LMR822F-GE2 概覽
An operational amplifier is a voltage-feedback amplifier used to amplify, buffer, filter, or control analog signals. The LMR822F belongs to the general-purpose operational-amplifier family within analog ICs and the broader signal-conditioning hierarchy. In portable battery-powered equipment, a low-voltage dual amplifier can process two signals or implement a differential stage while reducing package count and board area compared with two single amplifiers.
The LMR822F's 5.5 MHz gain-bandwidth product supports closed-loop operation at moderate signal frequencies, while its 2 V/us slew rate improves large-signal response. Rail-to-rail output operation allows the output to approach the available supply rails more closely than a conventional fixed-output amplifier, which is useful when signal headroom is limited. Low supply-current consumption further supports mobile and other battery-powered applications.
The dual-channel architecture provides two amplifiers in one 8-SOP package. Each channel can be configured as an inverting amplifier, non-inverting amplifier, voltage follower, comparator-like interface, or active-filter stage, subject to the stability, common-mode, and output-swing limits in the manufacturer datasheet. This flexibility makes the device useful in active filters, sensor interfaces, touch-screen control, audio signal conditioning, and low-voltage industrial systems.
Typical applications include portable audio input stages, resistive touch-sensing channels, buffered sensor outputs, active low-pass filters, and low-voltage industrial control boards. The 2.5 V minimum supply supports systems operating from a regulated 3.3 V rail, while the 5.5 V maximum supply accommodates 5 V analog rails. Engineers should confirm frequency, gain, output swing, input range, noise, and stability requirements for the intended configuration.
For dependable implementation, keep input and feedback connections short, place compensation or filter components close to the relevant pins, and avoid operating the amplifier beyond its stated 2.5 V to 5.5 V supply range. Verify each channel independently because dual packages share common supply and ground connections.
This product page combines the manufacturer's core operating specifications with application guidance, package information, sourcing support, and an engineering comparison of relevant alternatives. It helps designers identify whether the LMR822F-GE2's dual 5.5 MHz architecture is suitable before beginning PCB implementation.
直接替換替代品,適用於 LMR822F-GE2 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LMR822F-GE2 (相同外形與佔位) — 差異在於 Package.
LMR821G-GE2
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LMR824F-GE2
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LMR822G-GE2
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LMR822F-GE2 最大額定值與電氣特性
| Number of Amplifier Channels | 2 circuits |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Gain-Bandwidth Product | 5.5 MHz |
| Slew Rate | 2 V/us |
| Output Architecture | Rail-to-rail output |
| 工作溫度範圍 | -40 C to +85 C |
| 封裝 | 8-SOP |
| 安裝類型 | Surface mount |
| Device Classification | Standard general-purpose amplifier |
| Output Swing | Full swing |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
LMR822F-GE2 8-sop 腳位配置指南
LMR822F-GE2(8-sop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LMR822F-GE2.
請參閱 資料表 以查看完整腳位配置。
典型應用
LMR822F-GE2 適用於 6 應用s: Portable Audio Signal Conditioning, Resistive Touch Sensing, Low-Voltage Active Filters, Battery-Powered Sensor Buffering, Industrial Control Interfaces, Low-Voltage Data Acquisition.
Portable Audio Signal Conditioning
The LMR822F-GE2 fits portable audio signal-conditioning stages because each channel can provide gain and buffering within a 2.5 V to 5.5 V supply system. Its 5.5 MHz gain-bandwidth product supports signals well above most low-rate audio bandwidths, while the 2 V/us slew rate helps maintain low distortion when processing moderate-amplitude transients. The dual 8-SOP package reduces board area by combining two amplifier functions in one component. Rail-to-rail output operation provides useful signal swing on a 3.3 V rail, although the design must remain within the datasheet's output-voltage and load-current limits.
推薦
Resistive Touch Sensing
The LMR822F-GE2 can support two resistive touch-sensing channels because it contains two amplifier channels and operates from a low 2.5 V minimum supply. The 5.5 MHz gain-bandwidth product is adequate for processing touch-controller signals within an active-filter or buffer stage, and the 2 V/us slew rate provides a responsive transition capability. Rail-to-rail output behavior is useful when the controller must exercise a narrow voltage range near the supply rails. Touch-system performance still depends on electrode resistance, noise, settling time, and the specific sensor-front-end topology.
推薦
Low-Voltage Active Filters
The LMR822F-GE2 is appropriate for active-filter implementations where two amplifier sections are required in an 8-SOP package. Its 5.5 MHz gain-bandwidth product provides bandwidth above the operating range of many low-frequency sensor filters, while the 2 V/us slew rate supports signal transitions that are more demanding than a slow-precision filter alone would require. The 2.5 V to 5.5 V supply range allows operation from common low-voltage rails. Component selection must preserve loop gain and stability at the target closed-loop gain, including the effect of the amplifier output impedance and load capacitance.
推薦
Battery-Powered Sensor Buffering
The LMR822F-GE2 suits battery-powered sensor buffering because its low-voltage operation begins at 2.5 V and its dual-channel configuration can condition two sensor outputs in one package. The 5.5 MHz gain-bandwidth product provides ample bandwidth for common temperature, pressure, and resistive sensors, while the 2 V/us slew rate allows the amplifier to follow sensor transitions with limited distortion. Low supply-current consumption is explicitly identified as a product feature, making power budget an important selection criterion. The final design should account for sensor excitation, input offset, noise, and the load presented to the source.
推薦
Industrial Control Interfaces
The LMR822F-GE2 can serve as a dual amplifier in compact industrial control interfaces that operate from 2.5 V to 5.5 V. One channel may buffer a sensor input while the other amplifies a feedback or control signal, and the 8-SOP package limits board-space demand. Its 5.5 MHz gain-bandwidth product and 2 V/us slew rate provide useful dynamic performance for control signals and active filtering. Because industrial environments may contain fast transients, the amplifier should be paired with suitable input protection, grounding, and filtering, while maintaining its specified operating temperature of -40 C to +85 C.
推薦
Low-Voltage Data Acquisition
The LMR822F-GE2 is suitable for conditioning two low-voltage acquisition channels in compact data-conversion systems. Its 5.5 MHz gain-bandwidth product can support anti-alias or active-filter stages ahead of a converter, and the 2 V/us slew rate helps reproduce moderate-amplitude input transitions without requiring a larger high-speed amplifier. Rail-to-rail output behavior is advantageous when converter input ranges make efficient use of a 3.3 V or 5 V analog rail. The actual signal-chain bandwidth must remain comfortably below the closed-loop limits of the selected gain configuration.
推薦
推薦產品摘要
工程參考資料,適用於 LMR822F-GE2 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LMR821G-GE2 | LMR824F-GE2 | LMR822G-GE2 |
|---|---|---|---|---|
| Package | 8-SOP | 8-SOP | 8-SOP | 8-SOP |
| Brand | ROHM Semiconductor | ROHM Semiconductor | ROHM Semiconductor | ROHM Semiconductor |
| Amplifier Channels | 2 circuits | 1 circuit | 2 circuits | 2 circuits |
| Supply Voltage Range | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Output Architecture | Rail-to-rail output | Full-swing output | Rail-to-rail output | Rail-to-rail output |
主要差異化特點
- Combines two amplifier channels in one low-voltage package (對比LMR821G-GE2)
- Provides a defined 5.5 MHz gain-bandwidth product and 2 V/us slew rate (對比LMR824F-GE2)
- Operates across common low-voltage rails with rail-to-rail output (對比LMR822G-GE2)
設計說明
Use short, direct routing for each amplifier's input and feedback components. A 5.5 MHz gain-bandwidth product gives useful bandwidth, but parasitic capacitance and long feedback traces can alter phase margin, particularly at high closed-loop gain. Keep sensitive inputs away from power-supply nodes and switching nodes, and place filter or compensation components close to the associated pins.
Decouple the 2.5 V to 5.5 V supply close to the 8-SOP with a local ceramic bypass capacitor and adequate bulk capacitance for the board's load transients. Because both amplifier channels share the same package supplies, supply disturbance can affect both channels simultaneously. Verify ground-return paths so output-current flow does not add noise to the input-reference voltage.
Do not assume that a matching 8-SOP footprint guarantees a functional substitution. Before using LMR821G-GE2, LMR824F-GE2, or LMR822G-GE2, verify pin assignments, amplifier-channel count, input common-mode range, output swing, offset voltage, bias current, noise, gain, stability, and absolute-maximum ratings against the target design.
Treat the two channels as separate analog paths even though they share one package and supply. Maintain symmetrical grounding where channel matching matters, avoid routing one channel's output near the other channel's high-impedance input, and test each amplifier independently. Rail-to-rail output behavior provides more signal range on low-voltage rails, but the usable range still depends on load current and output swing.
合規資訊
ROHM declarations or qualification records were not present in the cited product information, so each compliance field remains unknown pending manufacturer documentation.