LPC11U24FHI33/301 - 50MHz Cortex-M0 USB MCU | NXP
部品番号: LPC11U24FHI33/301 ✓ 生産中LPC11U24FHI33/301 概要
A microcontroller is a compact semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC11U2x family belongs to the hierarchy of 32-bit embedded processors within the broader category of microcontrollers and embedded semiconductors. Its Arm Cortex-M0 architecture uses a simple instruction set designed to provide good code density for cost-sensitive control systems that previously used 8-bit or 16-bit processors.
The LPC11U24FHI33/301 supports CPU operation up to 50 MHz and combines 32 KB flash with 6 KB SRAM. Its USB device capability makes it useful for data acquisition, configuration interfaces, human-interface devices, and portable peripheral designs. Serial communications include USART support, while the manufacturer describes the family as a low-cost, low-power platform for embedded control and USB-connected products.
The controller combines a deterministic Arm Cortex-M0 core with on-chip memory and communication peripherals in one compact package. This integration reduces external component count and simplifies firmware access to code, data, USB, and serial interfaces. Designers should use the NXP datasheet pin-description table and package drawing to assign the 32 HVQFN connections, including the exposed thermal pad, before laying out the PCB.
Typical uses include USB-to-serial adapters, compact data loggers, industrial interface modules, sensor controllers, access-control peripherals, and embedded USB accessories. The 50 MHz operating rate supports responsive control and communication tasks, while the 32 KB flash budget is best suited to compact firmware rather than large graphical or protocol-heavy applications.
For a new PCB, preserve the HVQFN 32 land pattern and place all required decoupling capacitors close to their associated supply pins. Confirm the exact voltage, pin, clock, and peripheral configuration against the manufacturer datasheet before release, because those details are fundamental to safe firmware operation.
This product page combines the manufacturer overview, package and memory characteristics, sourcing guidance, and engineering-focused selection considerations to clarify where this low-cost USB microcontroller fits within an embedded design.
ドロップイン代替品: LPC11U24FHI33/301 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
LPC11U24FHI33/301Y
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LPC11U24FHI33/301 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 6 KB |
| EEPROM | 4 KB |
| Architecture | Arm Cortex-M0 |
| Instruction Set | 32-bit ARM |
| USB Interface | USB device |
| Serial Interface | USART |
| パッケージ | 32-HVQFN (5 x 5 mm) |
| ピン数 | 32 pins |
| 実装タイプ | Surface mount |
LPC11U24FHI33/301 32-hvqfn (5 x 5 mm) ピン配置ガイド
LPC11U24FHI33/301 (32-hvqfn (5 x 5 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LPC11U24FHI33/301.
詳細は データシート をご参照ください。
主な用途
LPC11U24FHI33/301 の用途: 6 件s: USB Serial Adapters, Compact Data Loggers, Industrial Sensor Controllers, USB Configuration Interfaces, Access-Control Peripherals, Portable Measurement Modules.
USB Serial Adapters
The LPC11U24FHI33/301 is suited to a USB-to-serial adapter because it combines a 50 MHz Arm Cortex-M0 core with a USB device interface and USART support. The 32 KB flash can hold the interface firmware, while 6 KB of SRAM supports USB descriptors, command handling, and temporary serial data. A compact implementation still needs careful USB signal routing, correct supply decoupling, and firmware that manages enumeration and UART flow control. The HVQFN 5 x 5 mm footprint minimizes board area, but exposed-pad soldering and adequate copper thermal support are essential.
おすすめ
Compact Data Loggers
A compact sensor logger can use the LPC11U24FHI33/301 to acquire data, process it locally, and transfer records through USB. The 50 MHz Cortex-M0 core provides ample responsiveness for fixed-format sampling and event handling, while 32 KB flash stores firmware and 6 KB SRAM holds working buffers. The 4 KB EEPROM is useful for configuration and calibration values that must survive resets. Designers should avoid exhausting SRAM with large buffers, use DMA-capable peripherals where appropriate, and follow the NXP power and grounding recommendations for stable USB communication.
おすすめ
Industrial Sensor Controllers
The LPC11U24FHI33/301 can form the core of a compact industrial sensor controller when the design needs local logic, serial communications, and USB configuration. Its Cortex-M0 architecture is appropriate for deterministic control loops, and the 32 KB flash, 6 KB SRAM, and 4 KB EEPROM divide the device into firmware, working memory, and persistent configuration. Before deployment, verify the exact supply range, temperature grade, pin tolerances, and ESD requirements for the installation environment. The small HVQFN package supports dense boards but calls for careful assembly controls and a stable exposed-pad thermal design.
おすすめ
USB Configuration Interfaces
For a USB configuration interface, the LPC11U24FHI33/301 offers a practical combination of USB device connectivity, USART support, and 32 KB flash in a compact package. Firmware can expose a control protocol, validate configuration commands, and bridge data to an external sensor or actuator. The 50 MHz core provides enough response time for command handling without requiring a higher-complexity MCU. Place USB routing components and decoupling capacitors according to the NXP reference layout, and confirm USB signaling, power-gating, and firmware-update requirements before production.
おすすめ
Access-Control Peripherals
The LPC11U24FHI33/301 is applicable to compact access-control peripherals that require a controller, status interface, and USB enumeration capability. The 32 KB flash can store protocol and device-management firmware, while 6 KB SRAM is sufficient for short transaction buffers and 4 KB EEPROM can retain identifiers or configuration. A 50 MHz Cortex-M0 core supports responsive credential or actuator handling. Security-sensitive deployments should add the necessary authentication and key-protection measures, while hardware design should validate voltage tolerances, connector protection, and thermal performance.
おすすめ
Portable Measurement Modules
A portable measurement module can use the LPC11U24FHI33/301 to combine sensor control, local calculations, serial communication, and USB data transfer. Its 50 MHz processor supports filtering and real-time control within a compact power and space envelope, while the 32 KB flash accommodates embedded firmware rather than requiring a separate program-memory component. The 4 KB EEPROM provides persistent calibration or setup storage. Final design work should confirm sensor-interface requirements, supply current, sleep-mode behavior, and USB bus-power limits using the manufacturer datasheet.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LPC11U24FHI33/301 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LPC11U24FHI33/301Y |
|---|---|---|
| Package | 32-HVQFN (5 x 5 mm) | 32-HVQFN (5 x 5 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors |
| CPU Core | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 50 MHz | 50 MHz |
| Flash Memory | 32 KB | 32 KB |
| SRAM | 6 KB | 6 KB |
| USB Support | USB device | USB device |
| Serial Interface | USART | USART |
| Ordering Suffix | /301 | /301Y |
主な差別化要因
- Integrated USB device connectivity in a compact Cortex-M0 controller (vs LPC11U24FHI33/301Y)
- Compact HVQFN footprint for space-constrained USB products (vs LPC11U24FHI33/301Y)
- Balanced embedded memory and communication resources (vs LPC11U24FHI33/301Y)
設計ノート
Use the NXP HVQFN32 land pattern and keep the exposed pad connected to the appropriate ground or power structure shown in the manufacturer package drawing. Place input and internal decoupling capacitors adjacent to their associated supply pins, with very short return paths. USB differential routing must be short, impedance-controlled, and kept free of test pads or unrelated switching paths where practical.
Determine the power budget from the datasheet operating modes rather than the 50 MHz maximum clock alone. Include the Cortex-M0 core, USB device state, USART activity, external transceiver consumption, and leakage paths. Validate startup, suspend, and brownout behavior across the intended supply range, and confirm that the USB 5 V path does not bypass any required system power-gating arrangement.
Estimated: thermal performance depends on the final PCB copper area, exposed-pad solder quality, ambient temperature, and the device's power dissipation. No junction-temperature calculation can be finalized until the operating mode and board construction are fixed. Use the manufacturer thermal characterization data, provide uninterrupted exposed-pad thermal copper, and apply the package reflow profile without allowing solder voids beneath the pad.
Do not assign every HVQFN connection from memory or assume that a similarly named LPC11Uxx or LPC11xx device is interchangeable. Confirm pin numbers, power rails, ground connections, exposed-pad treatment, SWD signals, and USB routing against the exact manufacturer datasheet. After PCB fabrication, verify continuity, shorts, supply sequencing, and programming voltage before attaching a populated USB or accessory board.
Separate USB data routing from switching supplies, crystal or clock circuitry, and high-current peripheral outputs. Use a continuous ground reference beneath the USB route, minimize stub branches, and keep switching-node copper away from the Cortex-M0 supply and communication lines. Place external USB protection or filtering components where their impact on signal integrity and device pin behavior has been reviewed.
コンプライアンス情報
The manufacturer product page identifies the LPC11U24FHI33 as active, but the available product information does not state the complete environmental-compliance status for the exact /301 ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status in the current NXP product documentation before release.