NXP Semiconductors

LPC11U24FHI33/301 - 50MHz Cortex-M0 USB MCU | NXP

부품 번호: LPC11U24FHI33/301 ✓ 활성
32-HVQFN (5 x 5 mm) Package 50 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

LPC11U24FHI33/301 개요

The NXP Semiconductors LPC11U24FHI33/301 is a 32-bit Arm Cortex-M0 microcontroller operating up to 50 MHz, with 32 KB of flash memory and USB device connectivity in a 32-pin HVQFN 5 x 5 mm package. The LPC11U24FHI33/301 also provides 6 KB of SRAM and 4 KB of EEPROM for firmware, working data, and configuration storage.

A microcontroller is a compact semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC11U2x family belongs to the hierarchy of 32-bit embedded processors within the broader category of microcontrollers and embedded semiconductors. Its Arm Cortex-M0 architecture uses a simple instruction set designed to provide good code density for cost-sensitive control systems that previously used 8-bit or 16-bit processors.

The LPC11U24FHI33/301 supports CPU operation up to 50 MHz and combines 32 KB flash with 6 KB SRAM. Its USB device capability makes it useful for data acquisition, configuration interfaces, human-interface devices, and portable peripheral designs. Serial communications include USART support, while the manufacturer describes the family as a low-cost, low-power platform for embedded control and USB-connected products.

The controller combines a deterministic Arm Cortex-M0 core with on-chip memory and communication peripherals in one compact package. This integration reduces external component count and simplifies firmware access to code, data, USB, and serial interfaces. Designers should use the NXP datasheet pin-description table and package drawing to assign the 32 HVQFN connections, including the exposed thermal pad, before laying out the PCB.

Typical uses include USB-to-serial adapters, compact data loggers, industrial interface modules, sensor controllers, access-control peripherals, and embedded USB accessories. The 50 MHz operating rate supports responsive control and communication tasks, while the 32 KB flash budget is best suited to compact firmware rather than large graphical or protocol-heavy applications.

For a new PCB, preserve the HVQFN 32 land pattern and place all required decoupling capacitors close to their associated supply pins. Confirm the exact voltage, pin, clock, and peripheral configuration against the manufacturer datasheet before release, because those details are fundamental to safe firmware operation.

This product page combines the manufacturer overview, package and memory characteristics, sourcing guidance, and engineering-focused selection considerations to clarify where this low-cost USB microcontroller fits within an embedded design.

드롭인 대체품: LPC11U24FHI33/301 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

LPC11U24FHI33/301Y

✅ 드롭인
📦 32-HVQFN (5 x 5 mm)
Same LPC11U24FHI33 base device, 32 KB flash, 6 KB SRAM, 50 MHz class, and HVQFN32 package; only the trailing Y ordering suffix differs.

📋 참조 대체품 (카탈로그에 없음)

LPC11U24FHI33/301 최대 정격 & 전기적 특성

Product Type 32-bit ARM Cortex-M0 microcontroller
Maximum CPU Frequency 50 MHz
Flash Memory 32 KB (32K x 8)
SRAM 6 KB
EEPROM 4 KB
Architecture Arm Cortex-M0
Instruction Set 32-bit ARM
USB Interface USB device
Serial Interface USART
패키지 32-HVQFN (5 x 5 mm)
핀 수 32 pins
실장 유형 Surface mount

LPC11U24FHI33/301 32-hvqfn (5 x 5 mm) 핀 구성 가이드

LPC11U24FHI33/301(32-hvqfn (5 x 5 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

LPC11U24FHI33/301의 32-hvqfn (5 x 5 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LPC11U24FHI33/301.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LPC11U24FHI33/301 적합 용도: 6 애플리케이션s: USB Serial Adapters, Compact Data Loggers, Industrial Sensor Controllers, USB Configuration Interfaces, Access-Control Peripherals, Portable Measurement Modules.

🔌

USB Serial Adapters

The LPC11U24FHI33/301 is suited to a USB-to-serial adapter because it combines a 50 MHz Arm Cortex-M0 core with a USB device interface and USART support. The 32 KB flash can hold the interface firmware, while 6 KB of SRAM supports USB descriptors, command handling, and temporary serial data. A compact implementation still needs careful USB signal routing, correct supply decoupling, and firmware that manages enumeration and UART flow control. The HVQFN 5 x 5 mm footprint minimizes board area, but exposed-pad soldering and adequate copper thermal support are essential.

🖥️

Compact Data Loggers

A compact sensor logger can use the LPC11U24FHI33/301 to acquire data, process it locally, and transfer records through USB. The 50 MHz Cortex-M0 core provides ample responsiveness for fixed-format sampling and event handling, while 32 KB flash stores firmware and 6 KB SRAM holds working buffers. The 4 KB EEPROM is useful for configuration and calibration values that must survive resets. Designers should avoid exhausting SRAM with large buffers, use DMA-capable peripherals where appropriate, and follow the NXP power and grounding recommendations for stable USB communication.

🏭

Industrial Sensor Controllers

The LPC11U24FHI33/301 can form the core of a compact industrial sensor controller when the design needs local logic, serial communications, and USB configuration. Its Cortex-M0 architecture is appropriate for deterministic control loops, and the 32 KB flash, 6 KB SRAM, and 4 KB EEPROM divide the device into firmware, working memory, and persistent configuration. Before deployment, verify the exact supply range, temperature grade, pin tolerances, and ESD requirements for the installation environment. The small HVQFN package supports dense boards but calls for careful assembly controls and a stable exposed-pad thermal design.

🧩

USB Configuration Interfaces

For a USB configuration interface, the LPC11U24FHI33/301 offers a practical combination of USB device connectivity, USART support, and 32 KB flash in a compact package. Firmware can expose a control protocol, validate configuration commands, and bridge data to an external sensor or actuator. The 50 MHz core provides enough response time for command handling without requiring a higher-complexity MCU. Place USB routing components and decoupling capacitors according to the NXP reference layout, and confirm USB signaling, power-gating, and firmware-update requirements before production.

🔐

Access-Control Peripherals

The LPC11U24FHI33/301 is applicable to compact access-control peripherals that require a controller, status interface, and USB enumeration capability. The 32 KB flash can store protocol and device-management firmware, while 6 KB SRAM is sufficient for short transaction buffers and 4 KB EEPROM can retain identifiers or configuration. A 50 MHz Cortex-M0 core supports responsive credential or actuator handling. Security-sensitive deployments should add the necessary authentication and key-protection measures, while hardware design should validate voltage tolerances, connector protection, and thermal performance.

📱

Portable Measurement Modules

A portable measurement module can use the LPC11U24FHI33/301 to combine sensor control, local calculations, serial communication, and USB data transfer. Its 50 MHz processor supports filtering and real-time control within a compact power and space envelope, while the 32 KB flash accommodates embedded firmware rather than requiring a separate program-memory component. The 4 KB EEPROM provides persistent calibration or setup storage. Final design work should confirm sensor-interface requirements, supply current, sleep-mode behavior, and USB bus-power limits using the manufacturer datasheet.

추천 제품 요약

LPC11U24FHI33/301Y Closely related NXP USB microcontroller ordering option 사용처: USB Serial Adapters, Industrial Sensor Controllers, Access-Control Peripherals LPC11U24FHI33/301 NXP Semiconductors 사용처: Compact Data Loggers, USB Configuration Interfaces, Portable Measurement Modules
What are the key specifications of LPC11U24FHI33/301 that engineers should know?
The LPC11U24FHI33/301 combines a 50 MHz Arm Cortex-M0 core, 32 KB flash, 6 KB SRAM, 4 KB EEPROM, USB device connectivity, and USART support in a 32-HVQFN 5 x 5 mm package. According to the NXP LPC11U24FHI33 product information and manufacturer datasheet, it is positioned as a low-cost, low-power microcontroller for compact embedded and USB-connected designs.
Where can I download the LPC11U24FHI33/301 datasheet PDF?
The official LPC11U24FHI33/301 datasheet is available from the NXP LPC11U24FHI33 product page, which links directly to the manufacturer data sheet. The device family is also described in the 74-page LPC11U24FHI33/301 datasheet listing. Use the NXP document for authoritative pin assignments, electrical limits, clock requirements, USB behavior, and package dimensions before finalizing the hardware.
Where can I find the LPC11U24FHI33/301 pinout?
The LPC11U24FHI33/301 pinout is documented in the NXP manufacturer datasheet, including the 32-HVQFN connection list and package drawing. This page does not reproduce the complete connection table because the manufacturer product page does not expose individual pin names. When assigning tracks, use the datasheet pin-description table and confirm the treatment of the exposed pad and power pins.
What is the LPC11U24FHI33/301 operating frequency and memory capacity?
The LPC11U24FHI33/301 operates at up to 50 MHz and provides 32 KB of flash, 6 KB of SRAM, and 4 KB of EEPROM. The NXP family materials also describe configurations with up to 10 KB of SRAM across the LPC11Uxx range. The specific LPC11U24FHI33/301 listings identify 6 KB of SRAM and 32 KB of flash.
Is the LPC11U24FHI33/301 suitable for USB peripheral designs?
Yes, the LPC11U24FHI33/301 is suitable for compact USB peripherals because it integrates a USB device interface, 32 KB flash, and 6 KB SRAM. According to the NXP product information, the LPC11U2x family targets low-cost embedded applications and combines low-power operation with a simple Cortex-M0 instruction set. USB enumeration, suspend, and bus-power details should be verified in the datasheet.
What can replace the LPC11U24FHI33/301 on an existing PCB?
The LPC11U24FHI33/301Y is the closest documented drop-in candidate because it retains the same LPC11U24FHI33 base device, 32 KB flash, 6 KB SRAM, HVQFN32 package, and 50 MHz class of operation. Its product-ordering suffix differs, so procurement and environmental-status requirements should be checked before substitution. No additional cross-brand drop-in replacement is established by the available manufacturer listings.
Is LPC11U24FHI33/301 the same as LPC11U24FHI33/301Y?
The LPC11U24FHI33/301Y and LPC11U24FHI33/301 share the LPC11U24FHI33 base designation, 32 KB flash, 6 KB SRAM, HVQFN32 package, USB device function, and 50 MHz operating class. They are closely related catalog options, but the different trailing suffix means the exact orderable specification and lifecycle or environmental declaration should be confirmed before treating one as the replacement for the other.
When should I choose LPC11U24FHI33/301 over another low-power Cortex-M0 MCU?
Choose the LPC11U24FHI33/301 when a design needs a 50 MHz Arm Cortex-M0 core, USB device connectivity, 32 KB flash, 6 KB SRAM, and a compact 32-HVQFN footprint in one device. It is particularly suitable for small USB accessories, serial adapters, and control modules. If a design needs more RAM, flash, analog channels, or automotive qualification, verify those requirements before committing the PCB.
Is LPC11U24FHI33/301 suitable for industrial control and sensor modules?
The LPC11U24FHI33/301 can suit compact sensor and control modules because it combines a 50 MHz Cortex-M0 core with 32 KB flash, 6 KB SRAM, EEPROM, USB device, and USART connectivity. Its 5 x 5 mm HVQFN package saves board area. Industrial suitability still depends on the exact temperature rating, supply range, ESD performance, and isolation requirements, which should be confirmed in the datasheet.
Where to buy LPC11U24FHI33/301 online?
Use the Request a Quote form on this page to request LPC11U24FHI33/301 availability, quantity breaks, and lead time for your required packaging. The manufacturer lists the base LPC11U24FHI33 product as active, while authorized channel listings cover the exact /301 ordering code. Share your forecast quantity and target delivery schedule so the appropriate production supply can be confirmed.
What is the price of LPC11U24FHI33/301?
The current LPC11U24FHI33/301 quotation is generated through the Request a Quote form on this page because pricing and availability vary with order quantity, packaging, and market conditions. Submit the required part number, quantity, and shipment destination to receive a current unit-price proposal and any applicable quantity-break structure.
What is the lead time for LPC11U24FHI33/301?
Request the current lead time using the Request a Quote form on this page and include your required quantity, reel quantity, shipment method, and target production date. The NXP product page identifies LPC11U24FHI33 as active, but a confirmed factory or channel lead time should be tied to the exact /301 package code and your forecast rather than assumed from the base-device status.
Is LPC11U24FHI33/301 in stock?
Stock should be confirmed through the Request a Quote form on this page for the exact LPC11U24FHI33/301 ordering code. The manufacturer identifies the LPC11U24FHI33 base product as active, and channel listings show the /301 configuration, but live inventory depends on quantity, packaging, and distribution timing. Submit your forecast for an availability update.
What is the difference between LPC11U24FHI33/301 and LPC1112FHN24/202J?
The LPC11U24FHI33/301 uses a 32-HVQFN 5 x 5 mm package and includes USB device connectivity, while LPC1112FHN24/202J belongs to a different LPC11xx device family and package arrangement. Cross-reference results describe differences in package and features but do not establish a pin-compatible replacement. A PCB swap should therefore be treated as a redesign unless the manufacturer package drawings confirm identical connections.
How much power does the LPC11U24FHI33/301 need for USB and peripheral operation?
The exact operating current depends on CPU load, clock settings, USB state, peripheral activity, and supply voltage, which are not published in the product-page extract. Use the NXP datasheet current-consumption tables for the design operating mode and include margin for USB transceiver and external circuitry. The 32-HVQFN package also requires layout and thermal analysis based on the manufacturer land pattern.
What tools are compatible with the LPC11U24FHI33/301?
The LPC11U24FHI33/301 is an Arm Cortex-M0 microcontroller in the NXP LPC11Uxx family, so development programming normally uses a debugger and programming tool compatible with the selected NXP device family and SWD interface. The exact toolchain, flash-programmer, and SDK release should be selected using the LPC11U24FHI33 device support file. Confirm pin assignment and programming voltage in the NXP documentation.

엔지니어링 참조 데이터: LPC11U24FHI33/301 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the LPC11U24FHI33/301 when the BOM requires that exact ordering code and the design needs a 50 MHz Arm Cortex-M0 core, 32 KB flash, 6 KB SRAM, USB device connectivity, USART, and a 32-HVQFN footprint. Its integrated feature set works well for compact adapters, measurement modules, and low-cost embedded controllers. The LPC11U24FHI33/301Y is the closest documented drop-in alternative because it shares the base device and package, but its suffix should be reconciled with procurement and lifecycle requirements before substitution. Parts such as the LPC1112FHN24/202J are comparison references rather than drop-in choices because their package and feature arrangements differ. If a design requires more than 6 KB SRAM, larger flash, different analog resources, a broader temperature range, or automotive qualification, select the corresponding device after checking the complete electrical and package requirements.

대체품과의 비교

파라미터 이 제품 LPC11U24FHI33/301Y
Package 32-HVQFN (5 x 5 mm) 32-HVQFN (5 x 5 mm)
Brand NXP Semiconductors NXP Semiconductors
CPU Core Arm Cortex-M0 Arm Cortex-M0
Maximum CPU Frequency 50 MHz 50 MHz
Flash Memory 32 KB 32 KB
SRAM 6 KB 6 KB
USB Support USB device USB device
Serial Interface USART USART
Ordering Suffix /301 /301Y

주요 차별점

  • Integrated USB device connectivity in a compact Cortex-M0 controller (vs LPC11U24FHI33/301Y)
  • Compact HVQFN footprint for space-constrained USB products (vs LPC11U24FHI33/301Y)
  • Balanced embedded memory and communication resources (vs LPC11U24FHI33/301Y)

설계 노트

Use the NXP HVQFN32 land pattern and keep the exposed pad connected to the appropriate ground or power structure shown in the manufacturer package drawing. Place input and internal decoupling capacitors adjacent to their associated supply pins, with very short return paths. USB differential routing must be short, impedance-controlled, and kept free of test pads or unrelated switching paths where practical.

Determine the power budget from the datasheet operating modes rather than the 50 MHz maximum clock alone. Include the Cortex-M0 core, USB device state, USART activity, external transceiver consumption, and leakage paths. Validate startup, suspend, and brownout behavior across the intended supply range, and confirm that the USB 5 V path does not bypass any required system power-gating arrangement.

Estimated: thermal performance depends on the final PCB copper area, exposed-pad solder quality, ambient temperature, and the device's power dissipation. No junction-temperature calculation can be finalized until the operating mode and board construction are fixed. Use the manufacturer thermal characterization data, provide uninterrupted exposed-pad thermal copper, and apply the package reflow profile without allowing solder voids beneath the pad.

Do not assign every HVQFN connection from memory or assume that a similarly named LPC11Uxx or LPC11xx device is interchangeable. Confirm pin numbers, power rails, ground connections, exposed-pad treatment, SWD signals, and USB routing against the exact manufacturer datasheet. After PCB fabrication, verify continuity, shorts, supply sequencing, and programming voltage before attaching a populated USB or accessory board.

Separate USB data routing from switching supplies, crystal or clock circuitry, and high-current peripheral outputs. Use a continuous ground reference beneath the USB route, minimize stub branches, and keep switching-node copper away from the Cortex-M0 supply and communication lines. Place external USB protection or filtering components where their impact on signal integrity and device pin behavior has been reviewed.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product page identifies the LPC11U24FHI33 as active, but the available product information does not state the complete environmental-compliance status for the exact /301 ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status in the current NXP product documentation before release.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

LPC11U24FHI33/301 datasheet LPC11U24FHI33/301 datasheet pdf LPC11U24FHI33/301 pinout LPC11U24FHI33/301 equivalent LPC11U24FHI33/301 replacement LPC11U24FHI33/301 price LPC11U24FHI33/301 stock NXP LPC11U24FHI33/301 LPC11U24FHI33/301 HVQFN32 pinout LPC11U24FHI33/301 USB microcontroller LPC11U24FHI33/301 vs LPC11U24FHI33/301Y LPC11U24FHI33/301 50MHz Cortex-M0

관련 부품 & 용어

NXP Semiconductors LPC11U24FHI33/301 LPC11U24FHI33/301Y LPC11U24FHI33 LPC11U2x Arm Cortex-M0 32-bit microcontroller embedded microcontroller microcontroller semiconductor USB device USART 32 KB flash memory 6 KB SRAM 4 KB EEPROM 50 MHz CPU 32-HVQFN QFN package family surface-mount package SWD exposed pad USB-to-serial adapter industrial sensor controller portable measurement module access-control peripheral
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기