LPC1752FBD80 - 100MHz Cortex-M3 MCU with USB | NXP
部品番号: LPC1752FBD80 ✓ 生産中LPC1752FBD80 概要
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. In the product hierarchy, an MCU is a semiconductor and embedded controller. The LPC1752 belongs to the NXP LPC1700 family of low-power, cost-effective Cortex-M3 devices. Its architecture combines deterministic 32-bit instruction execution with integrated USB and other application peripherals, reducing the component count required for a compact embedded system.
The headline configuration includes a 100 MHz Cortex-M3 core, 64 KB of program flash, and 16 KB of SRAM. USB support adds a dedicated connectivity path for USB peripherals or host/device applications. The LPC1700 family also provides extensive peripheral integration, allowing designers to connect sensors, communications hardware, and control signals through a single microcontroller rather than relying on numerous external devices. Its 80-LQFP package provides 80 external connection positions for signals and supply connections.
The 100 MHz operating frequency provides headroom for interrupt handling, protocol processing, and real-time control loops. Its 32-bit Cortex-M3 core supports efficient execution of embedded firmware while consuming less board area than a separate processor and supporting ICs. Memory sizing is important: 64 KB of flash stores the application firmware, while 16 KB of SRAM supports working data, stacks, buffers, and peripheral state. Programs that exceed either resource should be evaluated against the device limits before release.
Typical uses include USB-connected data acquisition, industrial monitoring, communication equipment, access-control systems, and compact consumer controllers. Its integration can simplify a board when the firmware needs USB and general-purpose control but does not require a larger external processor. The 80-LQFP package is also convenient for prototype layouts because it provides readily accessible perimeter pins and supports conventional board-assembly processes.
PCB design should preserve clean USB signal routing, provide stable local decoupling, and keep high-current or high-speed traces away from sensitive analog inputs. Firmware development must account for the 64 KB flash and 16 KB SRAM limits, interrupt latency, USB endpoint requirements, and the pin multiplexing options defined by the manufacturer. Use the LPC1752 reference manual and device pin description when assigning board functions.
This page consolidates the verified NXP product information, package characteristics, sourcing details, and engineering guidance for LPC1752FBD80. It also separates confirmed device facts from parameters that require validation in the manufacturer datasheet, helping engineers evaluate USB embedded designs and plan a controlled hardware qualification.
ドロップイン代替品: LPC1752FBD80 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LPC1752FBD80 (同一形状・フットプリント) — 相違点: Flash Memory, Package.
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストLPC1752FBD80 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Core Architecture | Arm Cortex-M3 |
| Maximum CPU Frequency | 100 MHz |
| Flash Memory | 64 KB |
| Program Memory Organization | 64K x 8 bits |
| SRAM | 16 KB |
| USB Support | Yes |
| パッケージ | 80-LQFP, 12 x 12 mm |
| 実装タイプ | Surface mount |
LPC1752FBD80 80-lqfp, 12 x 12 mm ピン配置ガイド
LPC1752FBD80 (80-lqfp, 12 x 12 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LPC1752FBD80.
詳細は データシート をご参照ください。
主な用途
LPC1752FBD80 の用途: 6 件s: USB Data Acquisition Controller, Industrial Monitoring Controller, USB Communication Gateway, Access Control and Security Peripheral, Compact Consumer Control Module, Programmable Logic Controller.
USB Data Acquisition Controller
The LPC1752FBD80 fits a USB data-acquisition controller because it combines a 100 MHz 32-bit Cortex-M3 core with 64 KB of flash, 16 KB of SRAM, and integrated USB connectivity. Firmware can sample connected inputs, format records, and transfer results through USB without requiring a separate USB controller. The 80-LQFP package exposes the required interface and control signals through a conventional surface-mount layout. Designers should budget SRAM for acquisition buffers and protocol stacks, while confirming peripheral pin multiplexing and USB routing against the NXP pin table before schematic release.
おすすめ
Industrial Monitoring Controller
The LPC1752FBD80 is suitable for industrial monitoring systems that combine sensor conditioning, local control, and USB-based service access. Its 100 MHz Cortex-M3 core provides deterministic processing for filtering, threshold checks, and data logging, while 16 KB of SRAM supports short working buffers. The 64 KB flash capacity can hold application firmware and configuration logic, but firmware budgeting remains important when diagnostic logs or update images are required. Confirm the device's listed peripherals, operating limits, and pin functions against the manufacturer documentation before selecting input channels.
おすすめ
USB Communication Gateway
The LPC1752FBD80 can serve as a compact USB communication gateway for industrial, access-control, or equipment interfaces. Its integrated USB support removes the need for a separate USB interface IC, while the 100 MHz Cortex-M3 core can handle framing, device management, and protocol translation. The 16 KB SRAM and 64 KB flash should be mapped against the selected protocol stack and configuration data. Board designers should reserve clean USB routing, define appropriate power-supply startup behavior, and verify pin multiplexing before finalizing the gateway hardware.
おすすめ
Access Control and Security Peripheral
The LPC1752FBD80 is appropriate for access-control peripherals that need local decision-making and a host connection. A 100 MHz Cortex-M3 core can execute credential-handling and state-machine firmware, while USB provides a connection to a host or configuration tool. The 64 KB flash and 16 KB SRAM support moderate embedded workloads, although cryptographic storage requirements should be reviewed against actual memory demand. The 80-LQFP package simplifies assembly into higher-density boards, and security-sensitive designs should apply the appropriate key-protection and update procedures.
おすすめ
Compact Consumer Control Module
The LPC1752FBD80 can control compact consumer modules where USB connectivity, moderate processing, and low board area are important. Its Cortex-M3 architecture supports responsive firmware for user interfaces, status control, and configuration, while the LQFP package offers a practical pin count for power, communications, and discrete I/O. The device's 100 MHz maximum operating frequency allows efficient handling of concurrent control tasks, but developers should avoid unnecessary polling and keep SRAM-intensive buffering within the 16 KB limit. Validate the complete power, thermal, and interface plan during prototype testing.
おすすめ
Programmable Logic Controller
The LPC1752FBD80 is well suited to compact programmable control tasks that benefit from a 32-bit Cortex-M3 core and integrated USB service connectivity. At up to 100 MHz, it can execute sequencing logic and respond to interrupts across multiple control inputs and outputs. Its 64 KB flash provides room for firmware, while 16 KB of SRAM must accommodate task state, communication buffers, and stack depth. Use the manufacturer documentation to confirm timer, serial-interface, and digital I/O assignments, and validate timing behavior under worst-case interrupt load before production release.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LPC1752FBD80 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 80-LQFP (12 x 12 mm) |
| Brand | NXP Semiconductors |
| Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 100 MHz |
| Flash Memory | 64 KB |
| SRAM | 16 KB |
| USB Support | Yes |
| Lifecycle Status | Active |
主な差別化要因
- Integrated USB with a 100 MHz Cortex-M3 core (vs LPC1766FBD100)
- Compact 12 x 12 mm LQFP implementation (vs LPC1766FBD100)
- Active manufacturer lifecycle position (vs LPC1766FBD100)
設計ノート
Assign every signal from the NXP pin-description table and check alternate functions before releasing the schematic. The 80-LQFP footprint exposes many peripheral and control options, and an incorrect mux assumption can create conflicts between USB, timers, serial interfaces, and general-purpose I/O. Preserve the package pin numbering shown by the manufacturer and verify land geometry against the current package drawing.
Route USB differential signals as a controlled-impedance pair with continuous reference planes and minimal stubs. Place USB-related protection and filtering components close to the connector, while keeping switching loops and high-current paths away from the communication area. The exact impedance, topology, and component values should follow the NXP hardware design guidance and the characteristics of the intended USB implementation.
Use the manufacturer's recommended supply and decoupling arrangement for both normal operation and USB attachment or removal. Check startup sequencing, current consumption, and voltage tolerances for the complete peripheral load rather than only the Cortex-M3 core. Because the detailed electrical limits are not reproduced on the product page, consult the official datasheet before selecting supply voltage, regulator capacity, or bulk and local capacitors.
Plan firmware around the fixed 64 KB flash and 16 KB SRAM limits before committing to application features. Reserve space for interrupt vectors, stack growth, communication buffers, diagnostics, and any field-update mechanism. Also avoid assuming that every peripheral named for the LPC1700 family is available on the LPC1752FBD80; confirm the device-specific peripheral list and pin mux options in the manufacturer documentation.
コンプライアンス情報
The verified product information confirms an active NXP device but does not state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations in the current manufacturer product documentation.