NXP Semiconductors

LPC1752FBD80 - 100MHz Cortex-M3 MCU with USB | NXP

MPN: LPC1752FBD80 ✓ Hoạt động
80-LQFP, 12 x 12 mm Package 100 MHz Speed 64 KB Memory
MOQ: 1 |

LPC1752FBD80 Tóm tắt

The NXP Semiconductors LPC1752FBD80 is a high-performance 32-bit Arm Cortex-M3 microcontroller operating at 100 MHz, with 64 KB of flash memory, 16 KB of SRAM, USB connectivity, and an 80-pin LQFP package. It is designed for embedded applications requiring efficient real-time control and a broad selection of integrated peripherals. The manufacturer lists the LPC1752FBD80 as active, making it the appropriate baseline for new industrial, consumer, communications, and USB-enabled controller designs.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. In the product hierarchy, an MCU is a semiconductor and embedded controller. The LPC1752 belongs to the NXP LPC1700 family of low-power, cost-effective Cortex-M3 devices. Its architecture combines deterministic 32-bit instruction execution with integrated USB and other application peripherals, reducing the component count required for a compact embedded system.

The headline configuration includes a 100 MHz Cortex-M3 core, 64 KB of program flash, and 16 KB of SRAM. USB support adds a dedicated connectivity path for USB peripherals or host/device applications. The LPC1700 family also provides extensive peripheral integration, allowing designers to connect sensors, communications hardware, and control signals through a single microcontroller rather than relying on numerous external devices. Its 80-LQFP package provides 80 external connection positions for signals and supply connections.

The 100 MHz operating frequency provides headroom for interrupt handling, protocol processing, and real-time control loops. Its 32-bit Cortex-M3 core supports efficient execution of embedded firmware while consuming less board area than a separate processor and supporting ICs. Memory sizing is important: 64 KB of flash stores the application firmware, while 16 KB of SRAM supports working data, stacks, buffers, and peripheral state. Programs that exceed either resource should be evaluated against the device limits before release.

Typical uses include USB-connected data acquisition, industrial monitoring, communication equipment, access-control systems, and compact consumer controllers. Its integration can simplify a board when the firmware needs USB and general-purpose control but does not require a larger external processor. The 80-LQFP package is also convenient for prototype layouts because it provides readily accessible perimeter pins and supports conventional board-assembly processes.

PCB design should preserve clean USB signal routing, provide stable local decoupling, and keep high-current or high-speed traces away from sensitive analog inputs. Firmware development must account for the 64 KB flash and 16 KB SRAM limits, interrupt latency, USB endpoint requirements, and the pin multiplexing options defined by the manufacturer. Use the LPC1752 reference manual and device pin description when assigning board functions.

This page consolidates the verified NXP product information, package characteristics, sourcing details, and engineering guidance for LPC1752FBD80. It also separates confirmed device facts from parameters that require validation in the manufacturer datasheet, helping engineers evaluate USB embedded designs and plan a controlled hardware qualification.

Bộ thay thế dễ dàng lắp đặt cho LPC1752FBD80 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LPC1752FBD80 (cùng hình factor và footprint) — khác nhau ở Flash Memory, Package.

NXP Semiconductors
Flash Memory: 64 KB (64K x 8)
Package: 80-pin LQFP, 12 x 12 mm
So sánh với LPC1752FBD80 →

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

LPC1752FBD80 Tỷ lệ tối đa & tính chất điện

Product Type 32-bit ARM Cortex-M3 microcontroller
Core Architecture Arm Cortex-M3
Maximum CPU Frequency 100 MHz
Flash Memory 64 KB
Program Memory Organization 64K x 8 bits
SRAM 16 KB
USB Support Yes
Hộp 80-LQFP, 12 x 12 mm
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân LPC1752FBD80 80-lqfp, 12 x 12 mm

Cấu hình chân cho LPC1752FBD80 (80-lqfp, 12 x 12 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 80-lqfp, 12 x 12 mm cho LPC1752FBD80

Không có dữ liệu chân cụ thể sẵn có cho LPC1752FBD80.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LPC1752FBD80 phù hợp cho 6 Áp dụngs: USB Data Acquisition Controller, Industrial Monitoring Controller, USB Communication Gateway, Access Control and Security Peripheral, Compact Consumer Control Module, Programmable Logic Controller.

🖥️

USB Data Acquisition Controller

The LPC1752FBD80 fits a USB data-acquisition controller because it combines a 100 MHz 32-bit Cortex-M3 core with 64 KB of flash, 16 KB of SRAM, and integrated USB connectivity. Firmware can sample connected inputs, format records, and transfer results through USB without requiring a separate USB controller. The 80-LQFP package exposes the required interface and control signals through a conventional surface-mount layout. Designers should budget SRAM for acquisition buffers and protocol stacks, while confirming peripheral pin multiplexing and USB routing against the NXP pin table before schematic release.

🏭

Industrial Monitoring Controller

The LPC1752FBD80 is suitable for industrial monitoring systems that combine sensor conditioning, local control, and USB-based service access. Its 100 MHz Cortex-M3 core provides deterministic processing for filtering, threshold checks, and data logging, while 16 KB of SRAM supports short working buffers. The 64 KB flash capacity can hold application firmware and configuration logic, but firmware budgeting remains important when diagnostic logs or update images are required. Confirm the device's listed peripherals, operating limits, and pin functions against the manufacturer documentation before selecting input channels.

🌐

USB Communication Gateway

The LPC1752FBD80 can serve as a compact USB communication gateway for industrial, access-control, or equipment interfaces. Its integrated USB support removes the need for a separate USB interface IC, while the 100 MHz Cortex-M3 core can handle framing, device management, and protocol translation. The 16 KB SRAM and 64 KB flash should be mapped against the selected protocol stack and configuration data. Board designers should reserve clean USB routing, define appropriate power-supply startup behavior, and verify pin multiplexing before finalizing the gateway hardware.

🔒

Access Control and Security Peripheral

The LPC1752FBD80 is appropriate for access-control peripherals that need local decision-making and a host connection. A 100 MHz Cortex-M3 core can execute credential-handling and state-machine firmware, while USB provides a connection to a host or configuration tool. The 64 KB flash and 16 KB SRAM support moderate embedded workloads, although cryptographic storage requirements should be reviewed against actual memory demand. The 80-LQFP package simplifies assembly into higher-density boards, and security-sensitive designs should apply the appropriate key-protection and update procedures.

📱

Compact Consumer Control Module

The LPC1752FBD80 can control compact consumer modules where USB connectivity, moderate processing, and low board area are important. Its Cortex-M3 architecture supports responsive firmware for user interfaces, status control, and configuration, while the LQFP package offers a practical pin count for power, communications, and discrete I/O. The device's 100 MHz maximum operating frequency allows efficient handling of concurrent control tasks, but developers should avoid unnecessary polling and keep SRAM-intensive buffering within the 16 KB limit. Validate the complete power, thermal, and interface plan during prototype testing.

⚙️

Programmable Logic Controller

The LPC1752FBD80 is well suited to compact programmable control tasks that benefit from a 32-bit Cortex-M3 core and integrated USB service connectivity. At up to 100 MHz, it can execute sequencing logic and respond to interrupts across multiple control inputs and outputs. Its 64 KB flash provides room for firmware, while 16 KB of SRAM must accommodate task state, communication buffers, and stack depth. Use the manufacturer documentation to confirm timer, serial-interface, and digital I/O assignments, and validate timing behavior under worst-case interrupt load before production release.

What is the LPC1752FBD80?
The LPC1752FBD80 is an active NXP Semiconductors 32-bit Arm Cortex-M3 microcontroller rated for operation up to 100 MHz. It integrates 64 KB of flash, 16 KB of SRAM, USB connectivity, and extensive LPC1700-family peripherals in an 80-LQFP package. NXP identifies the device as a high-performance, low-power Cortex-M3 platform for embedded applications.
What are the key specifications of LPC1752FBD80 that engineers should know?
The LPC1752FBD80 combines a 100 MHz 32-bit Arm Cortex-M3 core with 64 KB of flash memory, 16 KB of SRAM, USB support, and an 80-LQFP package measuring 12 x 12 mm. According to the NXP product information, it is an active device within the LPC1700 family, whose integrated peripherals support communications, control, and USB-enabled embedded designs.
Where can I download the LPC1752FBD80 datasheet PDF?
The official LPC1752FBD80 datasheet can be accessed from NXP's product page at https://www.nxp.com/part/LPC1752FBD80, where the Data Sheet link is provided. Use the NXP PDF for definitive electrical characteristics, pin descriptions, memory limits, clock requirements, USB details, and package dimensions before finalizing the hardware design.
Where can I find the LPC1752FBD80 pinout and pin descriptions?
The LPC1752FBD80 uses an 80-pin LQFP package, and its complete pin assignments must be taken from the pin-description table in the NXP manufacturer documentation. The searchable web results confirm the 12 x 12 mm LQFP80 package but do not reproduce individual pin numbers or signal names. Assign PCB nets only after checking the official LPC1752 datasheet and reference manual.
How much flash and SRAM does the LPC1752FBD80 have?
The LPC1752FBD80 provides 64 KB of flash memory, organized as 64K x 8 bits, and 16 KB of SRAM. NXP describes the part as a Cortex-M3 microcontroller for embedded applications. Firmware sizing must include the bootloader, application code, data initialization, interrupt vectors, and any update mechanism.
What clock frequency does the LPC1752FBD80 support?
The LPC1752FBD80 supports operation at up to 100 MHz. Its flash is organized as 64K x 8 bits, while the device includes 16 KB of SRAM for working memory. The manufacturer's datasheet should be used to confirm PLL settings, crystal requirements, timing margins, and the external clock arrangement used in the final design.
Is the LPC1752FBD80 suitable for USB embedded devices?
Yes, the LPC1752FBD80 is suitable for USB-enabled embedded systems because USB is one of its integrated functions. The 100 MHz Cortex-M3 core and 16 KB of SRAM provide processing and working-memory capacity for USB data acquisition, control, and communication firmware. Board implementation still requires correct USB data-path routing, impedance control, and power planning.
Where to buy LPC1752FBD80 online?
Use the Request a Quote form on this page to request LPC1752FBD80 availability, order quantities, and a current quotation. NXP lists the device as active, and its official part page provides the authoritative product status and technical documentation. The form allows buyers to connect with XAIPART without relying on stale public price tables.
What is the price of LPC1752FBD80?
The current LPC1752FBD80 quotation is generated through the Request a Quote form on this page. Pricing can vary with order quantity, package suffix, manufacturing traceability, and delivery requirements, so buyers should submit the required quantity and target date for an accurate response. NXP identifies the base device as active.
What is the lead time for LPC1752FBD80?
The current lead time and minimum order quantity for LPC1752FBD80 should be requested through the Request a Quote form on this page. Lead time depends on the ordered package suffix, quantity, and procurement conditions. NXP's product page lists LPC1752FBD80 as active, providing a useful lifecycle reference when planning a production build.
Is LPC1752FBD80 in stock?
Current LPC1752FBD80 stock should be confirmed through the Request a Quote form on this page. The active lifecycle status reported by NXP indicates that the product remains supported, but it does not by itself establish a current warehouse quantity. Include the required date, quantity, and package suffix in the request to obtain an actionable supply response.
What can replace LPC1752FBD80?
No independently verified drop-in replacement is established for LPC1752FBD80. A true replacement must use the same 80-LQFP footprint, preserve pin-to-pin connections, provide at least 64 KB of flash and 16 KB of SRAM, support USB, and match the electrical and clock requirements of the original design. Different-package Cortex-M3 devices require schematic and PCB changes and are not drop-in replacements.
Is the LPC1752FBD80 the same as LPC1752FBD80,551?
LPC1752FBD80,551 is an ordering designation associated with the LPC1752FBD80 device, not a drop-in alternative with different electrical characteristics. The visible suffix identifies ordering and packaging information, so it should not be treated as an engineering substitute in the alternatives list. Use the exact suffix required by the manufacturer when creating a production BOM.
LPC1752FBD80 vs LPC1766FBD100, which is better for a USB controller?
LPC1752FBD80 is the better match when the existing PCB uses its 80-LQFP footprint and the design requires 64 KB of flash, 16 KB of SRAM, USB, and operation up to 100 MHz. LPC1766FBD100 uses a different 100-LQFP package, so it is not a drop-in replacement and requires PCB and schematic changes even if its broader peripheral set is preferred.
When should I choose LPC1752FBD80 instead of another Cortex-M3 MCU?
Choose LPC1752FBD80 when the design is already based on its 80-LQFP footprint and requires a 100 MHz Cortex-M3 core, 64 KB of flash, 16 KB of SRAM, and integrated USB. Select another MCU only when its memory, peripherals, qualification, or software support provide a clear benefit. Otherwise, reusing the LPC1752 footprint simplifies validation, firmware bring-up, and PCB rework.

Dữ liệu tham khảo kỹ thuật cho LPC1752FBD80 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose LPC1752FBD80 when the design uses its 80-LQFP footprint and needs a 100 MHz Cortex-M3 core with 64 KB of flash, 16 KB of SRAM, and integrated USB. It is especially suitable for compact monitoring, data-acquisition, gateway, and control products that benefit from one active MCU and a conventional LQFP assembly process. LPC1766FBD100 should not be treated as a drop-in replacement because it uses a different 100-LQFP package and requires corresponding schematic and PCB changes. No independently verified cross-manufacturer or same-family drop-in alternative with matching footprint and ratings was established. For new designs, validate memory use, peripheral availability, USB implementation details, supply requirements, and operating limits against the official NXP documentation before committing the PCB.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 80-LQFP (12 x 12 mm)
Brand NXP Semiconductors
Core Arm Cortex-M3
Maximum CPU Frequency 100 MHz
Flash Memory 64 KB
SRAM 16 KB
USB Support Yes
Lifecycle Status Active

Bảo phân biệt quan trọng

  • Integrated USB with a 100 MHz Cortex-M3 core (vsLPC1766FBD100)
  • Compact 12 x 12 mm LQFP implementation (vsLPC1766FBD100)
  • Active manufacturer lifecycle position (vsLPC1766FBD100)

Ghi chú thiết kế

Assign every signal from the NXP pin-description table and check alternate functions before releasing the schematic. The 80-LQFP footprint exposes many peripheral and control options, and an incorrect mux assumption can create conflicts between USB, timers, serial interfaces, and general-purpose I/O. Preserve the package pin numbering shown by the manufacturer and verify land geometry against the current package drawing.

Route USB differential signals as a controlled-impedance pair with continuous reference planes and minimal stubs. Place USB-related protection and filtering components close to the connector, while keeping switching loops and high-current paths away from the communication area. The exact impedance, topology, and component values should follow the NXP hardware design guidance and the characteristics of the intended USB implementation.

Use the manufacturer's recommended supply and decoupling arrangement for both normal operation and USB attachment or removal. Check startup sequencing, current consumption, and voltage tolerances for the complete peripheral load rather than only the Cortex-M3 core. Because the detailed electrical limits are not reproduced on the product page, consult the official datasheet before selecting supply voltage, regulator capacity, or bulk and local capacitors.

Plan firmware around the fixed 64 KB flash and 16 KB SRAM limits before committing to application features. Reserve space for interrupt vectors, stack growth, communication buffers, diagnostics, and any field-update mechanism. Also avoid assuming that every peripheral named for the LPC1700 family is available on the LPC1752FBD80; confirm the device-specific peripheral list and pin mux options in the manufacturer documentation.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The verified product information confirms an active NXP device but does not state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations in the current manufacturer product documentation.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

lpc1752fbd80 datasheet LPC1752FBD80 datasheet pdf LPC1752FBD80 pinout LPC1752FBD80 footprint LPC1752FBD80 specifications LPC1752FBD80 100MHz LPC1752FBD80 64KB flash LPC1752FBD80 16KB SRAM NXP LPC1752FBD80 LPC1752FBD80 price LPC1752FBD80 stock LPC1752FBD80 replacement LPC1752FBD80 equivalent LPC1752FBD80 USB application circuit LPC1752FBD80 vs LPC1766FBD100

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors LPC1752FBD80 LPC1752FBD80,551 LPC1752FBD80K LPC1766FBD100 Arm Cortex-M3 microcontroller MCU embedded controller semiconductor USB Universal Serial Bus LQFP-80 LQFP package surface mount embedded processing 64 KB flash memory 16 KB SRAM 100 MHz 32-bit architecture industrial monitoring USB data acquisition real-time control RoHS
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ