NXP Semiconductors

LPC2106FBD48 - 60MHz ARM7 MCU, 128KB Flash | NXP

部品番号: LPC2106FBD48 ✓ 生産中
48-pin LQFP Package 60 MHz Speed 128 kB embedded high-speed flash Memory
MOQ: 1 |

LPC2106FBD48 概要

The NXP Semiconductors LPC2106FBD48 is a 32-bit ARM7TDMI-S microcontroller with a 60 MHz clock, 128 kB of embedded high-speed flash memory, and 64 kB of SRAM, housed in a 48-pin LQFP package. It combines deterministic 32-bit processing with embedded serial interfaces, general-purpose I/O, and in-system programming support for embedded control systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC2106 belongs to the 32-bit embedded-controller hierarchy, where an ARM7TDMI-S core executes firmware and communicates with sensors, actuators, communications circuits, and human-interface electronics. Its LQFP-48 package provides 32 general-purpose I/O pins and a practical platform for compact control boards.

The device supports 128 kB of high-speed flash for program storage and includes 64 kB of SRAM for working memory. Its serial interface set includes two UARTs, I2C, and SPI, enabling communication with external transceivers, sensors, memory devices, and host systems. The integrated PWM unit supports motor, lighting, and power-control functions, while Boundary Scan assists board-level testing.

The ARM7TDMI-S architecture provides a 32-bit RISC instruction set and real-time emulation and embedded trace support. This combination is useful when deterministic control and development visibility are required without the complexity of a higher-performance processor. The 60 MHz operating speed provides additional computation margin for protocol handling, sampling, state management, and supervisory control tasks.

Typical uses include industrial equipment interfaces, serial protocol converters, building-control nodes, instrumentation, communication modules, and compact embedded controllers. Two UARTs allow simultaneous host and field-device connections, while I2C and SPI support sensors and external peripherals. The PWM output can reduce the component count in motor-drive, dimming, or proportional-control subsystems.

Designers should preserve the ARM7 memory map, interrupt-vector behavior, and peripheral register compatibility when reusing existing LPC2106 firmware. Power, decoupling, clock, and programming-circuit decisions should follow the NXP LPC2104/2105/2106 datasheet. Boundary Scan availability also makes test access useful, but the exposed footprint must match the 48-pin LQFP layout.

This product summary consolidates the core CPU, memory, interface, package, and sourcing details for engineers evaluating the LPC2106FBD48. It also organizes drop-in family options, design guidance, and application positioning to support faster component selection and PCB planning.

ドロップイン代替品: LPC2106FBD48 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LPC2106FBD48 (同一形状・フットプリント) — 相違点: Flash Organization, Package Pitch.

NXP Semiconductors
Flash Organization: 128 KB (128K × 8 bits)
Package Pitch: 0.5 mm
比較対象 LPC2106FBD48 →

LPC2106FBD48/01,15

✅ ドロップイン
📦 48-LQFP (7x7 mm)
Same 60 MHz core, 128 kB flash, and 64 kB SRAM; /01 and /15 identify feature, temperature, and ordering codes that require final suffix verification.

📋 参考代替品(カタログ未掲載)

LPC2106FBD48/01

✅ ドロップイン
📦 48-LQFP (7x7 mm)
Same LPC2106 core, 60 MHz operation, 128 kB flash, and 48-LQFP footprint; /01 adds the manufacturer-defined feature suffix.

📋 参考代替品(カタログ未掲載)

LPC2106FBD48,151

✅ ドロップイン
📦 48-LQFP (7x7 mm)
Same 60 MHz ARM7 LPC2100-class configuration with 128 kB flash and 64 kB RAM; ,151 is an ordering-code variant requiring temperature-grade confirmation.

📋 参考代替品(カタログ未掲載)

LPC2106FBD48-01

✅ ドロップイン
📦 48-LQFP (7x7 mm)
Same LPC2106 family, 60 MHz operation, 128 kB flash, 64 kB RAM, and 48-pin LQFP package; -01 identifies the feature revision.

📋 参考代替品(カタログ未掲載)

LPC2106FBD48-0115

✅ ドロップイン
📦 48-LQFP (7x7 mm)
Same 60 MHz ARM7 configuration with 128 kB flash, 64 kB RAM, two UARTs, I2C, and SPI; -0115 is the manufacturer ordering-code form.

📋 参考代替品(カタログ未掲載)

LPC2106FBD48 最大定格&電気的特性

CPU Core ARM7TDMI-S, 16/32-bit
Maximum CPU Frequency 60 MHz
Program Memory 128 kB embedded high-speed flash
Flash Organization 128K x 8 bits
SRAM 64 kB
General-Purpose I/O 32 pins
UART Count 2 ports
Serial Interfaces UART, I2C, and SPI
PWM Support Integrated PWM unit
Programmable I/O ISP/IAP supported
Debug Support Real-time emulation and embedded trace
Test Support Boundary Scan
パッケージ 48-pin LQFP
Package Body Size 7 x 7 mm
Package Pitch 0.500 mm
実装タイプ Surface mount

LPC2106FBD48 0.500 mm ピン配置ガイド

LPC2106FBD48 (0.500 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

LPC2106FBD48 の 0.500 mm パッケージピン配置図

詳細なピン配置データはありません: LPC2106FBD48.

詳細は データシート をご参照ください。

主な用途

LPC2106FBD48 の用途: 6 件s: Industrial Serial Controller, Motor and PWM Control, Building Automation Node, Instrumentation and Data Logger, Communication Protocol Converter, LED Lighting Controller.

🏭

Industrial Serial Controller

The LPC2106FBD48 fits industrial serial-controller boards where one processor must coordinate two independent UART links while retaining enough program and data memory for protocol handling. Its 60 MHz ARM7TDMI-S core provides processing headroom for framing, checksums, filtering, and supervisory logic, while 128 kB of flash supports a complete control application and 64 kB of SRAM holds working state. The two UARTs can bridge a host computer to a field network or connect a controller to local equipment, while I2C and SPI provide additional channels for sensors, converters, and memory. A key design consideration is deterministic interrupt handling: assign UART priorities carefully and validate timing with the actual baud rates and frame lengths.

⚡

Motor and PWM Control

The LPC2106FBD48 is appropriate for compact motor, valve, or proportional actuator controllers because its integrated PWM hardware can generate deterministic control signals while the 60 MHz core executes motion logic and supervisory functions. Thirty-two general-purpose I/O support encoders, limit switches, interlocks, and status indicators, and the 128 kB flash provides room for a bootloader and application firmware. Use the PWM outputs with suitable driver transistors or gate drivers rather than driving loads directly. The principal engineering trade-off is that software timing must account for peripheral limits and interrupt latency, particularly when multiple channels or safety interlocks operate concurrently.

🧩

Building Automation Node

The LPC2106FBD48 can serve as a low-cost building-automation node for collecting sensor readings and forwarding control commands through a serial or network interface. Its 32-bit ARM7TDMI-S processor can handle protocol conversion, local filtering, schedules, and alarm logic, while 64 kB of SRAM supports buffers and state without continuous external-memory access. The two UARTs provide a useful separation between an upstream controller and a local field bus, and I2C or SPI can connect environmental sensors. For reliable operation, isolate long wiring from the microcontroller, provide appropriate ESD protection, and validate communications behavior under electrical noise and bus faults.

🔧

Instrumentation and Data Logger

The LPC2106FBD48 suits compact instrumentation and data-logging systems that need flexible I/O, multiple serial devices, and local nonvolatile storage. The 60 MHz ARM7TDMI-S core can sample inputs, perform scaling and filtering, and prepare records while the 128 kB flash stores firmware and the 64 kB SRAM provides working buffers. SPI offers a practical path to external flash or a high-speed sensor, and I2C supports lower-speed devices. Because the MCU is not a precision analog frontend, define sensor excitation, anti-alias filtering, grounding, and reference accuracy separately. Firmware should also include write wear management for repeated data-log operations.

🌐

Communication Protocol Converter

The LPC2106FBD48 is well matched to protocol-converter products because two UARTs can bridge two serial domains while the 60 MHz processor performs buffering, translation, diagnostics, and configuration. Its 128 kB of embedded flash is suitable for multiple protocol stacks and a bootloader, and 64 kB of SRAM supports active transfer buffers. I2C and SPI leave additional expansion paths for local configuration storage or status monitoring. Designers should size buffers for the highest sustained traffic rate, avoid blocking UART interrupts, and implement flow control or timeout behavior for either side. A watchdog and bootloader strategy are also advisable for unattended equipment.

💡

LED Lighting Controller

The LPC2106FBD48 can implement multi-channel LED lighting and indication because its PWM peripherals support proportional brightness or current-command functions while its 32 I/O pins handle enables, fault signals, and user controls. The 60 MHz ARM7TDMI-S core leaves capacity for schedules, scene data, telemetry, and communication updates, with 128 kB flash available for firmware and configuration. LED strings require suitable transistor or constant-current drive stages; the MCU should control those stages rather than carry load current directly. Validate duty-cycle limits, thermal behavior of the driver stage, and update behavior so that communications traffic does not introduce visible flicker.

What is the NXP LPC2106FBD48?
The NXP LPC2106FBD48 is a 32-bit ARM7TDMI-S microcontroller operating at up to 60 MHz, with 128 kB of flash, 64 kB of SRAM, and 32 general-purpose I/O pins. According to the NXP LPC2104/2105/2106 datasheet, it combines real-time emulation, embedded trace support, and ISP/IAP capabilities in a 48-pin LQFP package.
What are the key specifications of LPC2106FBD48 that engineers should know?
The LPC2106FBD48 combines a 60 MHz ARM7TDMI-S core, 128 kB of high-speed flash, 64 kB of SRAM, 32 general-purpose I/O pins, and two UARTs in a 48-pin LQFP package. The NXP datasheet also identifies I2C, SPI, PWM, Boundary Scan, ISP/IAP, real-time emulation, and embedded trace support as key device capabilities.
Where can I download the LPC2106FBD48 datasheet PDF?
The LPC2106FBD48 datasheet PDF is available directly from NXP at the LPC2104_2105_2106 data-sheet URL shown on this page. The document covers the shared LPC2104, LPC2105, and LPC2106 family and states that /00 and /01 suffixes distinguish devices when new features are introduced.
Where can I find the LPC2106FBD48 pinout?
The LPC2106FBD48 pinout is identified in the NXP LPC2104/2105/2106 datasheet, using the package drawing and pin-description table for the 48-pin LQFP option. When assigning PCB tracks, use that table to match every pin number, power connection, ground connection, and I/O signal to the selected device suffix.
How much flash and RAM does LPC2106FBD48 have?
The LPC2106FBD48 provides 128 kB of embedded high-speed flash and 64 kB of SRAM. The NXP LPC2104/2105/2106 datasheet describes the flash as ISP/IAP memory, enabling firmware download and in-application programming while preserving separate SRAM for runtime data.
Which serial interfaces are available on LPC2106FBD48?
The LPC2106FBD48 includes two UARTs, I2C, and SPI. The Mouser technical summary identifies the device family as 128K flash, 64K RAM, two UART, I2C, and SPI, making the part suitable for multi-port serial coordination, sensor buses, and external flash or display peripherals.
LPC2106FBD48 vs LPC2106FBD48/01,15: which should I choose?
The LPC2106FBD48/01,15 is the orderable form listed by DigiKey and Mouser for the same 60 MHz, 128 kB-flash, 64 kB-RAM ARM7TDMI-S device in a 48-pin LQFP package. Selection should account for the /01 feature suffix and the documented temperature and ordering codes before treating it as an exact procurement replacement.
Is LPC2106FBD48 suitable for real-time embedded control?
The LPC2106FBD48 is suitable for deterministic embedded control because it uses a 32-bit ARM7TDMI-S core, supports real-time emulation and embedded trace, and runs at up to 60 MHz. It also provides two UARTs, I2C, SPI, PWM, and 32 I/O pins for sensor acquisition, communications, and actuator control.
Can LPC2106FBD48 replace an LPC2104FBD48 or LPC2105FBD48?
A PCB-level replacement is possible only when the device's package, pin assignments, voltage requirements, memory needs, and firmware expectations are all compatible. The LPC2104, LPC2105, and LPC2106 share the NXP family datasheet and 48-pin option, but RAM size and peripheral availability must be checked before approving a substitution.
What can replace LPC2106FBD48?
The closest documented drop-in candidate is LPC2106FBD48/01,15, which is listed as the same 60 MHz ARM7 LPC2100-class device with 128 kB flash, 64 kB RAM, two UARTs, I2C, SPI, and a 48-LQFP package. A qualified engineer should still verify temperature grade, pin suffix behavior, clock setup, and supply-voltage limits.
Is LPC2106FBD48 the same as LPC2106FBD48/01?
The LPC2106FBD48 and LPC2106FBD48/01 are related LPC2106 variants rather than interchangeable without qualification. The NXP datasheet says suffixes distinguish devices when they include new features, so firmware, clock behavior, ordering temperature, and all electrical limits should be compared before substitution.
When should I choose LPC2106FBD48 over an alternative MCU?
Choose the LPC2106FBD48 when an existing ARM7-based design benefits from 60 MHz execution, 128 kB flash, 64 kB RAM, two UARTs, and a 48-pin LQFP footprint. It is especially suitable for maintaining LPC2100-family firmware and peripheral compatibility; a different Cortex-M MCU is not a drop-in replacement even if it offers similar memory.
Where can I buy LPC2106FBD48 and request current lead time?
Use the Request a Quote form on this page to request LPC2106FBD48 pricing, current availability, minimum order quantity, and production lead time. The Request a Quote workflow is the appropriate channel for a transaction against the exact 48-pin LQFP ordering configuration.
What is the price of LPC2106FBD48?
Current transaction pricing for the exact LPC2106FBD48 configuration is handled through the Request a Quote form on this page. Quote requests should specify the required quantity, package shipping format, and acceptable delivery schedule so the response reflects the intended procurement commitment.
Is LPC2106FBD48 in stock and what is its lead time?
Current LPC2106FBD48 stock status and lead time should be confirmed through the Request a Quote form on this page. Because inventory and scheduling can vary by order quantity and shipment configuration, use the quotation response rather than relying on a general catalog availability statement.
What design checks are required for an LPC2106FBD48 PCB?
The LPC2106FBD48 PCB must preserve the 48-pin LQFP footprint, power and ground connections, clock circuit, boot and programming interface, and exposed-I/O assignments defined by the NXP datasheet. Firmware also depends on the ARM7 vector table, interrupt layout, and peripheral configuration, making a hardware-only equivalence check insufficient.

エンジニアリング参考データ: LPC2106FBD48 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the LPC2106FBD48 when maintaining an ARM7TDMI-S-based design requires 60 MHz performance, 128 kB flash, 64 kB SRAM, two UARTs, I2C, SPI, PWM, and a 48-pin LQFP footprint. The LPC2106FBD48/01,15 is the best documented procurement alternative when the board and firmware are confirmed compatible with the /01 feature and ordering suffixes. LPC2106FBD48/01 and LPC2106FBD48,151 are also family-level alternatives for the same footprint, but their temperature and suffix meanings must be checked against the original bill of materials. A Cortex-M microcontroller from another manufacturer may offer more performance, but it is not a drop-in replacement because the instruction set, peripheral register map, memory organization, and startup code differ. For production use, qualify the exact suffix, verify clock and power behavior, and preserve the ARM7 firmware and pin assignment assumptions.

代替品との比較

パラメータ この製品 LPC2106FBD48/01,15 LPC2106FBD48/01 LPC2106FBD48,151 LPC2106FBD48-01 LPC2106FBD48-0115
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm)
CPU Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum CPU Frequency 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz
Flash Memory 128 kB 128 kB 128 kB 128 kB 128 kB 128 kB
SRAM 64 kB 64 kB 64 kB 64 kB 64 kB 64 kB
UART Count 2 ports 2 ports 2 ports 2 ports 2 ports 2 ports
General-Purpose I/O 32 pins 32 pins 32 pins 32 pins 32 pins 32 pins
Serial Interfaces UART, I2C, and SPI UART, I2C, and SPI UART, I2C, and SPI UART, I2C, and SPI UART, I2C, and SPI UART, I2C, and SPI
Programmable I/O ISP/IAP ISP/IAP ISP/IAP ISP/IAP ISP/IAP ISP/IAP

主な差別化要因

  • Maintains the established LPC2106 CPU and memory configuration (vs LPC2106FBD48/01)
  • Uses an established 48-pin LQFP footprint for drop-in PCB planning (vs LPC2106FBD48,151)
  • Provides two UARTs plus I2C and SPI in the same controller (vs LPC2106FBD48-01)
  • Supports firmware download and in-application programming (vs LPC2106FBD48-0115)

設計ノート

Route the LQFP-48 footprint exactly to the NXP package drawing and pin-description table, with particular attention to power, ground, reset, and clock pins. Keep traces away from the crystal and high-speed signal paths, provide a stable ground reference around the device, and maintain the manufacturer's recommended spacing for programming and test signals.

Follow the LPC2104/2105/2106 datasheet's recommended decoupling network and place capacitors close to the corresponding power pins. Separate noisy digital return paths from analog sensor references where applicable, and verify startup, brownout, and operating-voltage behavior across the complete temperature range. Do not infer limits from another MCU in the board design.

Treat an /01 ordering suffix as a functional qualification item, not merely a shipment label. The NXP datasheet states that suffixes differentiate devices when new features are present. Before substitution, compare clock behavior, peripheral availability, electrical limits, temperature grade, pin assignments, and the firmware assumptions associated with the exact LPC2106 variant.

Use the two UART connections, I2C, and SPI as separate physical interfaces where possible, and route them away from clocks and switching nodes. Provide controlled impedance or appropriate series damping when long traces leave the board. Firmware should include framing checks, timeout handling, and bus-fault recovery so a communications error does not leave the controller in an undefined state.

Keep the ARM7 clock circuit layout compact and symmetrical, with short ground returns and no traces beneath the crystal oscillator. Boundary Scan can improve production test access, but test pads should not disturb sensitive analog routing. Review signal-integrity and EMC requirements at the system level because the MCU package and clock topology alone do not determine final board performance.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the product information. AEC-Q100 is not applicable to this general-purpose microcontroller unless NXP designates a separate automotive-qualified orderable variant.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

LPC2106FBD48 datasheet LPC2106FBD48 pinout LPC2106FBD48 datasheet pdf LPC2106FBD48 specifications LPC2106FBD48 equivalent LPC2106FBD48 replacement LPC2106FBD48 footprint LPC2106FBD48 schematic LPC2106FBD48 vs LPC2106FBD48/01,15 NXP LPC2106FBD48 LPC2106FBD48 price LPC2106FBD48 stock LPC2106 LQFP48 pinout LPC2106 60MHz microcontroller

関連部品&用語

NXP Semiconductors LPC2106FBD48 LPC2106FBD48/01,15 LPC2106FBD48/01 LPC2106FBD48,151 LPC2106FBD48-01 LPC2106FBD48-0115 ARM7TDMI-S 32-bit RISC processor microcontroller embedded controller semiconductor system-on-chip ISP IAP UART I2C SPI PWM Boundary Scan embedded trace LQFP-48 QFP family surface-mount package industrial automation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示