LPC2106FBD48 - 60MHz ARM7 MCU, 128KB Flash | NXP
料号: LPC2106FBD48 ✓ 量产中LPC2106FBD48 概述
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC2106 belongs to the 32-bit embedded-controller hierarchy, where an ARM7TDMI-S core executes firmware and communicates with sensors, actuators, communications circuits, and human-interface electronics. Its LQFP-48 package provides 32 general-purpose I/O pins and a practical platform for compact control boards.
The device supports 128 kB of high-speed flash for program storage and includes 64 kB of SRAM for working memory. Its serial interface set includes two UARTs, I2C, and SPI, enabling communication with external transceivers, sensors, memory devices, and host systems. The integrated PWM unit supports motor, lighting, and power-control functions, while Boundary Scan assists board-level testing.
The ARM7TDMI-S architecture provides a 32-bit RISC instruction set and real-time emulation and embedded trace support. This combination is useful when deterministic control and development visibility are required without the complexity of a higher-performance processor. The 60 MHz operating speed provides additional computation margin for protocol handling, sampling, state management, and supervisory control tasks.
Typical uses include industrial equipment interfaces, serial protocol converters, building-control nodes, instrumentation, communication modules, and compact embedded controllers. Two UARTs allow simultaneous host and field-device connections, while I2C and SPI support sensors and external peripherals. The PWM output can reduce the component count in motor-drive, dimming, or proportional-control subsystems.
Designers should preserve the ARM7 memory map, interrupt-vector behavior, and peripheral register compatibility when reusing existing LPC2106 firmware. Power, decoupling, clock, and programming-circuit decisions should follow the NXP LPC2104/2105/2106 datasheet. Boundary Scan availability also makes test access useful, but the exposed footprint must match the 48-pin LQFP layout.
This product summary consolidates the core CPU, memory, interface, package, and sourcing details for engineers evaluating the LPC2106FBD48. It also organizes drop-in family options, design guidance, and application positioning to support faster component selection and PCB planning.
直接替换替代料: LPC2106FBD48 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LPC2106FBD48 (相同外形与封装尺寸) ——差异在于 Flash Organization, Package Pitch.
LPC2106FBD48/01,15
✅ 直接替换📋 参考替代料(不在目录中)
LPC2106FBD48/01
✅ 直接替换📋 参考替代料(不在目录中)
LPC2106FBD48,151
✅ 直接替换📋 参考替代料(不在目录中)
LPC2106FBD48-01
✅ 直接替换📋 参考替代料(不在目录中)
LPC2106FBD48-0115
✅ 直接替换📋 参考替代料(不在目录中)
LPC2106FBD48 最大额定值与电气特性
| CPU Core | ARM7TDMI-S, 16/32-bit |
| Maximum CPU Frequency | 60 MHz |
| Program Memory | 128 kB embedded high-speed flash |
| Flash Organization | 128K x 8 bits |
| SRAM | 64 kB |
| General-Purpose I/O | 32 pins |
| UART Count | 2 ports |
| Serial Interfaces | UART, I2C, and SPI |
| PWM Support | Integrated PWM unit |
| Programmable I/O | ISP/IAP supported |
| Debug Support | Real-time emulation and embedded trace |
| Test Support | Boundary Scan |
| 封装 | 48-pin LQFP |
| Package Body Size | 7 x 7 mm |
| Package Pitch | 0.500 mm |
| 安装类型 | Surface mount |
LPC2106FBD48 0.500 mm 引脚配置指南
LPC2106FBD48(0.500 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LPC2106FBD48.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LPC2106FBD48 适用于 6 应用s: Industrial Serial Controller, Motor and PWM Control, Building Automation Node, Instrumentation and Data Logger, Communication Protocol Converter, LED Lighting Controller.
Industrial Serial Controller
The LPC2106FBD48 fits industrial serial-controller boards where one processor must coordinate two independent UART links while retaining enough program and data memory for protocol handling. Its 60 MHz ARM7TDMI-S core provides processing headroom for framing, checksums, filtering, and supervisory logic, while 128 kB of flash supports a complete control application and 64 kB of SRAM holds working state. The two UARTs can bridge a host computer to a field network or connect a controller to local equipment, while I2C and SPI provide additional channels for sensors, converters, and memory. A key design consideration is deterministic interrupt handling: assign UART priorities carefully and validate timing with the actual baud rates and frame lengths.
推荐
Motor and PWM Control
The LPC2106FBD48 is appropriate for compact motor, valve, or proportional actuator controllers because its integrated PWM hardware can generate deterministic control signals while the 60 MHz core executes motion logic and supervisory functions. Thirty-two general-purpose I/O support encoders, limit switches, interlocks, and status indicators, and the 128 kB flash provides room for a bootloader and application firmware. Use the PWM outputs with suitable driver transistors or gate drivers rather than driving loads directly. The principal engineering trade-off is that software timing must account for peripheral limits and interrupt latency, particularly when multiple channels or safety interlocks operate concurrently.
推荐
Building Automation Node
The LPC2106FBD48 can serve as a low-cost building-automation node for collecting sensor readings and forwarding control commands through a serial or network interface. Its 32-bit ARM7TDMI-S processor can handle protocol conversion, local filtering, schedules, and alarm logic, while 64 kB of SRAM supports buffers and state without continuous external-memory access. The two UARTs provide a useful separation between an upstream controller and a local field bus, and I2C or SPI can connect environmental sensors. For reliable operation, isolate long wiring from the microcontroller, provide appropriate ESD protection, and validate communications behavior under electrical noise and bus faults.
推荐
Instrumentation and Data Logger
The LPC2106FBD48 suits compact instrumentation and data-logging systems that need flexible I/O, multiple serial devices, and local nonvolatile storage. The 60 MHz ARM7TDMI-S core can sample inputs, perform scaling and filtering, and prepare records while the 128 kB flash stores firmware and the 64 kB SRAM provides working buffers. SPI offers a practical path to external flash or a high-speed sensor, and I2C supports lower-speed devices. Because the MCU is not a precision analog frontend, define sensor excitation, anti-alias filtering, grounding, and reference accuracy separately. Firmware should also include write wear management for repeated data-log operations.
推荐
Communication Protocol Converter
The LPC2106FBD48 is well matched to protocol-converter products because two UARTs can bridge two serial domains while the 60 MHz processor performs buffering, translation, diagnostics, and configuration. Its 128 kB of embedded flash is suitable for multiple protocol stacks and a bootloader, and 64 kB of SRAM supports active transfer buffers. I2C and SPI leave additional expansion paths for local configuration storage or status monitoring. Designers should size buffers for the highest sustained traffic rate, avoid blocking UART interrupts, and implement flow control or timeout behavior for either side. A watchdog and bootloader strategy are also advisable for unattended equipment.
推荐
LED Lighting Controller
The LPC2106FBD48 can implement multi-channel LED lighting and indication because its PWM peripherals support proportional brightness or current-command functions while its 32 I/O pins handle enables, fault signals, and user controls. The 60 MHz ARM7TDMI-S core leaves capacity for schedules, scene data, telemetry, and communication updates, with 128 kB flash available for firmware and configuration. LED strings require suitable transistor or constant-current drive stages; the MCU should control those stages rather than carry load current directly. Validate duty-cycle limits, thermal behavior of the driver stage, and update behavior so that communications traffic does not introduce visible flicker.
推荐
推荐产品汇总
工程参考数据: LPC2106FBD48 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LPC2106FBD48/01,15 | LPC2106FBD48/01 | LPC2106FBD48,151 | LPC2106FBD48-01 | LPC2106FBD48-0115 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) |
| CPU Core | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S |
| Maximum CPU Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Flash Memory | 128 kB | 128 kB | 128 kB | 128 kB | 128 kB | 128 kB |
| SRAM | 64 kB | 64 kB | 64 kB | 64 kB | 64 kB | 64 kB |
| UART Count | 2 ports | 2 ports | 2 ports | 2 ports | 2 ports | 2 ports |
| General-Purpose I/O | 32 pins | 32 pins | 32 pins | 32 pins | 32 pins | 32 pins |
| Serial Interfaces | UART, I2C, and SPI | UART, I2C, and SPI | UART, I2C, and SPI | UART, I2C, and SPI | UART, I2C, and SPI | UART, I2C, and SPI |
| Programmable I/O | ISP/IAP | ISP/IAP | ISP/IAP | ISP/IAP | ISP/IAP | ISP/IAP |
关键差异点
- Maintains the established LPC2106 CPU and memory configuration (对比 LPC2106FBD48/01)
- Uses an established 48-pin LQFP footprint for drop-in PCB planning (对比 LPC2106FBD48,151)
- Provides two UARTs plus I2C and SPI in the same controller (对比 LPC2106FBD48-01)
- Supports firmware download and in-application programming (对比 LPC2106FBD48-0115)
设计说明
Route the LQFP-48 footprint exactly to the NXP package drawing and pin-description table, with particular attention to power, ground, reset, and clock pins. Keep traces away from the crystal and high-speed signal paths, provide a stable ground reference around the device, and maintain the manufacturer's recommended spacing for programming and test signals.
Follow the LPC2104/2105/2106 datasheet's recommended decoupling network and place capacitors close to the corresponding power pins. Separate noisy digital return paths from analog sensor references where applicable, and verify startup, brownout, and operating-voltage behavior across the complete temperature range. Do not infer limits from another MCU in the board design.
Treat an /01 ordering suffix as a functional qualification item, not merely a shipment label. The NXP datasheet states that suffixes differentiate devices when new features are present. Before substitution, compare clock behavior, peripheral availability, electrical limits, temperature grade, pin assignments, and the firmware assumptions associated with the exact LPC2106 variant.
Use the two UART connections, I2C, and SPI as separate physical interfaces where possible, and route them away from clocks and switching nodes. Provide controlled impedance or appropriate series damping when long traces leave the board. Firmware should include framing checks, timeout handling, and bus-fault recovery so a communications error does not leave the controller in an undefined state.
Keep the ARM7 clock circuit layout compact and symmetrical, with short ground returns and no traces beneath the crystal oscillator. Boundary Scan can improve production test access, but test pads should not disturb sensitive analog routing. Review signal-integrity and EMC requirements at the system level because the MCU package and clock topology alone do not determine final board performance.
合规信息
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the product information. AEC-Q100 is not applicable to this general-purpose microcontroller unless NXP designates a separate automotive-qualified orderable variant.