NXP Semiconductors

LPC2119FBD64 - 60MHz ARM7 MCU, 128KB Flash | NXP

部品番号: LPC2119FBD64 ✓ 生産中
64-LQFP, 10 x 10 mm Package 60 MHz Speed 128 KB Memory
MOQ: 1 |

LPC2119FBD64 概要

NXP Semiconductors LPC2119FBD64 is a 16/32-bit Arm7TDMI-S microcontroller with a 60 MHz maximum clock, 128 KB of embedded high-speed flash memory, 16 KB of SRAM, and a 64-LQFP 10 x 10 mm package. The device combines a 128-bit-wide memory interface, a unique accelerator architecture, 46 I/O lines, a 10-bit ADC, and CAN connectivity for compact embedded control designs.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic on one device. The LPC2100 family belongs to the broader hierarchy of microcontrollers, embedded processors, and embedded semiconductors. It targets applications requiring deterministic control, serial communications, data acquisition, and local real-time processing while keeping component count and board area low.

The LPC2119FBD64 is differentiated by its Arm7TDMI-S core, which supports both 32-bit ARM state and 16-bit Thumb state. Thumb mode can reduce code size for constrained applications, while the 32-bit instruction set remains available for higher-performance routines. Its 128-bit memory interface and accelerator architecture support efficient 32-bit execution at the maximum clock rate. Embedded flash also permits in-system programming and in-application programming.

Peripheral integration is important in embedded systems because it reduces external component requirements. The LPC2119 includes a 10-bit ADC, CAN interface, real-time emulation, embedded trace support, and boundary-scan capability. These features support acquisition, industrial networking, production test, and debug workflows. The manufacturer also documents 64, 128, and 256 KB flash configurations across the LPC2109, LPC2119, and LPC2129 family, with the LPC2119 position corresponding to 128 KB.

Typical uses include industrial control equipment, CAN-connected modules, data loggers, motor and process controllers, and compact embedded platforms requiring 46 GPIO. The 64-LQFP package offers a practical pin count for a mixed-signal controller while keeping the die exposed through a conventional surface-mount footprint.

Board design should preserve the controller's power, decoupling, clock, reset, and programming requirements from the manufacturer datasheet. CAN routing also requires controlled impedance and appropriate termination strategy. Because the public product material does not reproduce the complete pin-description table, use the official LPC2119 documentation when assigning tracks and connector functions.

This product page combines the official NXP device description with package, memory, connectivity, lifecycle, sourcing, replacement, and engineering guidance. It also distinguishes order-code alternatives from genuinely independent drop-in substitutes, helping engineers make a PCB-safe replacement decision rather than assuming that similar specifications guarantee pin compatibility.

ドロップイン代替品: LPC2119FBD64 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

LPC2119FBD64/01

✅ ドロップイン
📦 64-LQFP (10 x 10 mm)
0 MHz core-rate difference and 0 KB flash difference versus LPC2119FBD64; order-code suffix differs

📋 参考代替品(カタログ未掲載)

LPC2119FBD64/01,15

✅ ドロップイン
📦 64-LQFP (10 x 10 mm)
0 MHz core-rate difference and 0 KB flash difference versus LPC2119FBD64; ordering suffix differs

📋 参考代替品(カタログ未掲載)

LPC2119FBD64/01151

✅ ドロップイン
📦 64-LQFP (10 x 10 mm)
0 MHz core-rate difference and 0 KB flash difference versus LPC2119FBD64; ordering suffix differs

📋 参考代替品(カタログ未掲載)

LPC2119FBD64/01EL

✅ ドロップイン
📦 64-LQFP (10 x 10 mm)
0 MHz core-rate difference and 0 KB flash difference versus LPC2119FBD64; ordering suffix differs

📋 参考代替品(カタログ未掲載)

LPC2119FBD64 最大定格&電気的特性

CPU Core Arm7TDMI-S 16/32-bit RISC
Maximum CPU Frequency 60 MHz
Embedded Flash Memory 128 KB
SRAM 16 KB
Program Memory Width 8 bit
Memory Interface Width 128 bit
I/O Lines 46 lines
ADC Resolution 10 bit
CAN Interface 1 CAN controller
パッケージ 64-LQFP, 10 x 10 mm
Terminal Pitch 0.50 mm
実装タイプ Surface Mount
Debug Support Real-time emulation and embedded trace
Boundary Scan Supported
Programming Support ISP and IAP

LPC2119FBD64 64-lqfp, 10 x 10 mm ピン配置ガイド

LPC2119FBD64 (64-lqfp, 10 x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

LPC2119FBD64 の 64-lqfp, 10 x 10 mm パッケージピン配置図

詳細なピン配置データはありません: LPC2119FBD64.

詳細は データシート をご参照ください。

主な用途

LPC2119FBD64 の用途: 6 件s: CAN-Connected Industrial Controller, Embedded Data Logger, Sensor Acquisition and Monitoring, Motor and Process Control, Automotive or Equipment Embedded Platform, Secure Network Appliance Gateway.

🏭

CAN-Connected Industrial Controller

The LPC2119FBD64 fits compact industrial control nodes that require deterministic processing and network connectivity without a separate processor. Its 60 MHz Arm7TDMI-S core, 128 KB embedded flash, 16 KB SRAM, and integrated CAN controller provide enough resources for protocol handling, local logic, and supervisory functions. The 64-LQFP package also exposes 46 I/O lines for sensors, actuators, and digital status signals. In implementation, the MCU should drive an appropriate CAN transceiver, use controlled-impedance routing, apply correct bus termination, and include protection suitable for the industrial environment. Real-time emulation and embedded trace support are valuable during commissioning and fault analysis.

🖥️

Embedded Data Logger

The LPC2119FBD64 is appropriate for a standalone data logger because it combines 128 KB of embedded flash with 16 KB of SRAM, a 10-bit ADC, and 46 general-purpose I/O lines. Firmware can sample analog sensors, timestamp records, apply control logic, and store selected information locally while the flash supports ISP or IAP workflows. The 60 MHz core provides useful headroom for protocol handling and background processing. Designers should choose external nonvolatile storage when logging volume exceeds internal flash, and should account for flash endurance, write wear leveling, data retention, and write-protect strategy in the finished logger.

🧩

Sensor Acquisition and Monitoring

The integrated 10-bit ADC makes the LPC2119FBD64 useful for sensor acquisition, condition monitoring, and low-to-moderate-resolution measurement systems. Its 60 MHz processor can service multiple digital inputs, execute control algorithms, and manage communications while the 46 I/O lines support sensors, indicators, and interface signals. The 64-LQFP package provides a practical balance between pin availability and package size. For accurate measurements, the analog signal path should use suitable conditioning and filtering, the ADC reference should remain stable, and grounding should prevent high-current outputs from introducing noise into the analog input and reference network.

⚡

Motor and Process Control

The LPC2119FBD64 can serve as the supervisory controller in motor-drive or process-control equipment where 60 MHz execution, 16 KB SRAM, and numerous GPIO are more important than a highly integrated motor-control accelerator. It can accept position or process inputs, execute control sequences, drive discrete outputs, and report status over CAN. Its 128 KB flash also accommodates a bootloader and application firmware. The final design must separate analog power and noisy switching stages from sensitive control signals, include suitable gate-driver protection, and validate timing margins under worst-case load, temperature, and electromagnetic conditions.

🚗

Automotive or Equipment Embedded Platform

The LPC2119FBD64 is technically suitable for legacy embedded platforms requiring local flash, CAN connectivity, mixed analog and digital control, and a compact surface-mount package. Its Arm7TDMI-S instruction set remains useful for maintaining established code, while real-time emulation and embedded trace support help diagnose timing-sensitive behavior. Engineers should verify the exact temperature grade, ordering suffix, errata status, and applicable automotive qualification for the chosen order code before using it in a safety- or vehicle-critical function. The 46 GPIO and 10-bit ADC also support body electronics, actuator control, and diagnostic interfaces in established designs.

🌐

Secure Network Appliance Gateway

The LPC2119FBD64 can serve as a small protocol-conversion or communications gateway where a dedicated MCU needs local flash and deterministic peripheral handling. Its 128-bit memory interface, accelerator architecture, 128 KB flash, and 16 KB SRAM support efficient 32-bit code execution while the CAN controller and 46 I/O lines provide connectivity. A gateway implementation should keep the MCU outside the primary radio or high-speed network data path unless the selected architecture has been performance-tested. Boot protection, firmware update procedures, watchdog behavior, and secure key storage must be designed into the platform rather than added later.

What is the LPC2119FBD64?
The LPC2119FBD64 is an NXP Semiconductors 16/32-bit Arm7TDMI-S microcontroller designed for embedded control, data acquisition, and CAN-connected systems. According to the NXP product information, it operates at up to 60 MHz and includes 128 KB of embedded high-speed flash, a 128-bit-wide memory interface, a unique accelerator architecture, a 10-bit ADC, and a 64-LQFP package. Its combination of local flash, SRAM, real-time emulation, and embedded trace support makes it suitable for compact systems that require deterministic execution and field programming.
What are the key specifications of LPC2119FBD64?
The LPC2119FBD64 combines a 60 MHz Arm7TDMI-S core with 128 KB of embedded flash and 16 KB of SRAM. NXP lists 46 I/O lines, a 10-bit ADC, CAN connectivity, real-time emulation, embedded trace support, boundary scan, and ISP/IAP programming in a 64-LQFP 10 x 10 mm package. The 128-bit memory interface and accelerator architecture are specifically intended to support efficient 32-bit code execution at the maximum clock rate. These are the principal electrical, memory, connectivity, and packaging characteristics to check during design-in.
Where can I download the LPC2119FBD64 datasheet?
The official LPC2119FBD64 documentation can be reached from the NXP product page at https://www.nxp.com/part/LPC2119FBD64. NXP also provides a dedicated LPC2000 family product page containing the general description and device documentation links. Use the manufacturer document for the authoritative pin-description table, electrical characteristics, memory map, peripheral descriptions, and application guidance. The LPC2119FBD64 page is the most appropriate starting point because it links the exact ordering code to its associated technical documentation.
Where can I find the LPC2119FBD64 pinout?
The LPC2119FBD64 pinout is documented in the official NXP LPC2119 datasheet and package pin-description table. The device is offered in a 64-LQFP package with a 0.50 mm terminal pitch, but the complete numbered signal list is not reproduced on this page. Use the manufacturer pin table when assigning power, ground, reset, clock, JTAG, ADC, CAN, and GPIO nets. The package drawing and pin-description table should be checked together because exposed-pad, power, and special-function details can affect PCB routing.
How much flash and SRAM does LPC2119FBD64 have?
The LPC2119FBD64 has 128 KB of embedded high-speed flash memory and 16 KB of SRAM. The official NXP family description identifies the LPC2119 as the 128 KB member of the LPC2109, LPC2119, and LPC2129 group, whose available configurations extend from 64 KB to 256 KB. The embedded flash supports ISP and IAP operation, while the SRAM provides working memory for real-time control tasks. Firmware sizing and stack allocation should account for both requirements during software planning.
What peripherals are integrated into the LPC2119FBD64?
The LPC2119FBD64 integrates a 10-bit ADC, CAN connectivity, 46 I/O lines, real-time emulation, embedded trace support, and boundary-scan capability. According to the NXP product information, its Arm7TDMI-S core can execute in both 32-bit ARM state and 16-bit Thumb state. These peripherals make the device suitable for sensor acquisition, networked industrial control, production test, and embedded debug systems. The ADC performs analog-to-digital conversion, while CAN supports communication between embedded nodes on a common bus.
Where can I buy LPC2119FBD64 and check its current lead time?
Use the Request a Quote form on this page to request LPC2119FBD64 availability, current lead time, order quantities, and a formal quotation. The listing represents an order-on-request commercial workflow, so availability should not be inferred merely because the part appears in an online catalog. For production planning, state the required date code, quantity, packaging preference, and shipment destination with the request. This allows procurement to confirm the exact LPC2119FBD64 order code and current delivery position without relying on a static stock statement.
What is the price of LPC2119FBD64?
Use the Request a Quote form on this page for the current LPC2119FBD64 price, volume tiers, and stock position. Commercial quotes may depend on order quantity, packaging, date code, and delivery location, so a historical catalog amount should not be treated as a current quotation. The request should identify LPC2119FBD64 exactly rather than an LPC2119 family member with a different order suffix. XAIPART will calculate the customer quotation for the requested configuration and confirm commercial terms.
Is LPC2119FBD64 in stock?
The current LPC2119FBD64 stock position should be confirmed through the Request a Quote form on this page. This page uses an order-on-request commercial model and does not claim immediate availability from the mere existence of a catalog listing. Include the required quantity, packaging format, date-code constraint, and target delivery date in the request. For scheduled production, request confirmation of available inventory and the earliest shipment plan together so procurement can assess continuity before releasing the build.
What can replace LPC2119FBD64 on the same PCB?
The closest documented replacement is the NXP LPC2119FBD64/01 order code, which retains the same 60 MHz Arm7TDMI-S core and 128 KB flash basis in the LPC2100 family. NXP community replacement discussion also identifies LPC2119FBD64/01EL and LPC2119FBD64/01,15 as the same device distinguished by ordering details. A replacement should still be checked for temperature grade, flash configuration, pin definitions, errata status, and qualification requirements. No independent cross-brand, pin-compatible substitute is established by the available manufacturer documentation.
Is LPC2119FBD64/01 a drop-in replacement for LPC2119FBD64?
LPC2119FBD64/01 is the closest documented same-package alternative to LPC2119FBD64, retaining the 60 MHz Arm7TDMI-S core and 128 KB flash configuration in a 64-LQFP 10 x 10 mm package. Its practical suitability still depends on the device revision, temperature range, errata, and ordering conditions attached to each suffix. Because the LPC2119 family is legacy technology, verify that the replacement has the required CAN, ADC, debug, and memory behavior rather than comparing clock speed alone. The manufacturer ordering table should control the final decision.
LPC2119FBD64 vs LPC2119FBD64/01,15 — which is better for an embedded control design?
LPC2119FBD64 and LPC2119FBD64/01,15 both belong to the 60 MHz, 128 KB-flash LPC2119 configuration and use the 64-LQFP 10 x 10 mm package, so the difference is principally encoded in the ordering suffix. For an existing PCB, choose the code confirmed by NXP as equivalent for the required operating grade, package quantity, and lifecycle conditions. For a new design, a currently supported NXP MCU family may offer a longer availability window, but it should be treated as a redesign unless its pinout and peripheral requirements are independently verified.
When should I choose LPC2119FBD64 instead of a newer MCU?
Choose LPC2119FBD64 when an existing Arm7TDMI-S design depends on its established 60 MHz core, 128 KB flash, 16 KB SRAM, 10-bit ADC, CAN interface, 46 GPIO, and 64-LQFP footprint. It is particularly appropriate when preserving an existing PCB, bootloader, peripheral routing, and software toolchain is more valuable than adopting a newer architecture. For a new design with no legacy constraint, compare longevity, toolchain support, security features, and availability against current MCU families rather than assuming the older LPC2119 offers the best platform.
Is LPC2119FBD64 suitable for CAN-connected industrial equipment?
The LPC2119FBD64 is suitable for CAN-connected industrial equipment when its 60 MHz performance, 128 KB flash, 16 KB SRAM, 46 I/O lines, 10-bit ADC, and integrated CAN controller match the system requirements. Its real-time emulation and embedded trace features also support development and diagnostics. The implementation should follow the manufacturer reference design for CAN transceiver selection, termination, input impedance, and protective components. Firmware must additionally validate timing, fault handling, bus-off recovery, and environmental requirements for the deployed equipment.
What is the best NXP equivalent for LPC2119FBD64?
The best documented NXP equivalent is an order-code variant of the LPC2119 rather than a different MCU family. LPC2119FBD64/01 is documented as the corresponding 60 MHz, 128 KB-flash part in the same 64-LQFP package, while NXP community discussion identifies LPC2119FBD64/01,15 and LPC2119FBD64/01EL as equivalent ordering forms. No independent cross-brand part is established as drop-in compatible because the Arm7TDMI-S instruction set, boot behavior, memory organization, debug interface, and mixed peripheral pinout must all be preserved.

エンジニアリング参考データ: LPC2119FBD64 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose LPC2119FBD64 when maintaining an existing 64-LQFP Arm7TDMI-S design is important and the application benefits from 128 KB embedded flash, 16 KB SRAM, a 10-bit ADC, CAN, and 46 GPIO. It is a practical continuity choice for established firmware, PCB, bootloader, and toolchain environments. LPC2119FBD64/01 and the related LPC2119 order codes are the closest documented alternatives because they preserve the 60 MHz, 128 KB-flash family configuration and package, but their suffix-specific ordering and qualification conditions must be checked. No independent cross-brand substitute should be treated as drop-in compatible without a documented pin-for-pin comparison of the Arm7TDMI-S core, memory organization, boot behavior, debug interface, ADC, CAN pins, and GPIO assignments. For a new design with no legacy constraint, evaluate currently supported MCU families and treat any architectural change as a redesign rather than a component substitution.

代替品との比較

パラメータ この製品 LPC2119FBD64/01 LPC2119FBD64/01,15 LPC2119FBD64/01151 LPC2119FBD64/01EL
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)

主な差別化要因

  • Maintains the same documented core and memory configuration (vs LPC2119FBD64/01)
  • Preserves the established 64-LQFP board footprint (vs LPC2119FBD64/01,15)
  • Combines local control and CAN networking (vs LPC2119FBD64/01151)
  • Supports field programming and embedded debugging (vs LPC2119FBD64/01EL)

設計ノート

Route the 64-LQFP lands, power inputs, ground connections, clock network, reset circuitry, and debug signals directly from the official NXP pin-description table. Preserve the 0.50 mm terminal pitch and follow the manufacturer's land-pattern dimensions rather than relying on a generic 64-LQFP drawing. Place decoupling capacitors close to the associated supply pins with short, low-loop return paths. Mixed-signal designs should isolate ADC routing from CAN and switching-node returns to reduce coupling into the 10-bit conversion result.

For CAN operation, use a controlled-impedance layer and route the bus as a differential pair with consistent geometry and minimal stubs. Locate the CAN transceiver close to the connector or protected bus interface, and follow its recommended termination arrangement so the inactive-stub behavior remains acceptable in both network states. Keep the controller pins away from switching power stages and high-current return paths. Validate the completed layout for crosstalk, ground discontinuities, ESD routing, and connector-to-transceiver surge current.

Design the supply network for the exact LPC2119FBD64 ordering code using the manufacturer's operating and electrical limits. The device integrates multiple digital and analog functions, so stable rails and local decoupling are essential for reliable clocking, flash access, ADC measurement, and CAN operation. Keep the analog supply and ADC reference paths free from switching-node noise. Check startup sequencing, reset release, and brownout behavior in the complete power tree rather than assuming a laboratory supply represents the final system.

Do not treat every LPC2119 order code as an unconditional substitute. The suffix can encode ordering, temperature, packaging, or lifecycle conditions that matter to production qualification. Before replacing LPC2119FBD64, compare the manufacturer ordering table, package drawing, pin description, errata, temperature range, and application qualification. Also verify that existing firmware and the boot path operate correctly with the replacement. A matching package and clock rate alone do not establish full application compatibility.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available manufacturer and distributor information does not explicitly state the requested compliance status for LPC2119FBD64. AEC-Q100 status is recorded as not applicable because no automotive qualification claim is established for this order code.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

lpc2119fbd64 datasheet nxp lpc2119fbd64 LPC2119FBD64 pinout LPC2119FBD64 datasheet pdf LPC2119FBD64 60MHz LPC2119FBD64 128KB flash LPC2119FBD64 LQFP-64 LPC2119FBD64 equivalent LPC2119FBD64 replacement LPC2119FBD64 cross reference LPC2119FBD64 vs LPC2119FBD64/01 LPC2119FBD64 CAN application circuit LPC2119FBD64 price LPC2119FBD64 stock

関連部品&用語

NXP Semiconductors LPC2119FBD64 LPC2119FBD64/01 LPC2119FBD64/01,15 LPC2119FBD64/01151 LPC2119FBD64/01EL Arm7TDMI-S microcontroller embedded processor embedded semiconductor 32-bit RISC 16-bit Thumb mode embedded high-speed flash memory ISP IAP 10-bit ADC CAN controller real-time emulation embedded trace boundary scan 64-LQFP LQFP package family surface mount industrial control CAN network
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示