NXP Semiconductors

LPC2124FBD64 - 60MHz ARM7TDMI-S MCU | NXP Semiconductors

部品番号: LPC2124FBD64 ✗ 生産終了
3.3 V Vdss 64-pin LQFP, 10 mm x 10 mm Package 60 MHz Speed 256 KB Memory
MOQ: 1 |

LPC2124FBD64 概要

NXP Semiconductors LPC2124FBD64 is a 16/32-bit Arm7TDMI-S microcontroller with a maximum clock frequency of 60 MHz, 256 KB of embedded high-speed flash memory, 16 KB of SRAM, and 46 general-purpose I/O lines in a 64-pin LQFP package. It combines a 128-bit memory interface with an accelerator architecture designed to support 32-bit code execution at the maximum clock rate.

A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one package. The LPC2124 belongs to the Arm7TDMI-S embedded-control hierarchy, combining deterministic real-time execution with in-system programming, in-application programming, analog conversion, timers, serial interfaces, and general-purpose I/O. This makes it suitable for industrial controllers, embedded data acquisition, communications equipment, and real-time monitoring systems.

The LPC2124FBD64 provides 256 KB of flash for firmware and 16 KB of SRAM for working data. Its 10-bit ADC supports analog measurement functions, while 46 GPIO pins provide flexible connections to sensors, actuators, displays, and communication transceivers. The 60 MHz Arm7TDMI-S core supports 32-bit instruction execution, and the accelerator architecture improves performance on suitable memory-intensive operations.

The device uses a 3.3 V CMOS supply according to the manufacturer product information. The LQFP-64 package has a 0.50 mm terminal pitch and is suitable for conventional surface-mount PCB assembly. Its documented operating-temperature range for the LPC2124FBD64/00,15 ordering variant is -40 °C to +85 °C. The manufacturer identifies the family as supporting real-time emulation and embedded trace functions.

Typical applications include industrial automation controllers, serial-protocol gateways, data-acquisition units, motor and process-control systems, and communications equipment. The combination of 256 KB flash, 16 KB SRAM, 46 I/O lines, and a 10-bit ADC supports compact embedded designs requiring both digital control and analog measurement.

For PCB implementation, assign the power, ground, reset, clock, and programming signals according to the manufacturer pin-description table in the LPC2124 datasheet. Place decoupling capacitors close to the supply pins and preserve the required signal-routing geometry around the 64-pin LQFP footprint. Firmware changes should follow the manufacturer’s ISP/IAP and flash-programming procedure rather than relying on undocumented bootloader behavior.

This page consolidates the manufacturer specifications, package information, ordering variants, and design guidance needed to evaluate the LPC2124FBD64, compare same-footprint family alternatives, and plan an embedded-controller board without duplicating the raw datasheet organization.

ドロップイン代替品: LPC2124FBD64 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LPC2124FBD64 (同一形状・フットプリント) — 相違点: Package, Programming Support, Terminal Pitch.

NXP Semiconductors
Package: 64-LQFP, 10 x 10 mm
Programming Support: ISP and IAP
Terminal Pitch: 0.5 mm
比較対象 LPC2124FBD64 →

LPC2124FBD64/01,15

✅ ドロップイン
📦 LQFP-64
Same 60 MHz core and 256 KB flash; documented -40 °C to +85 °C range versus the target suffix's exact grade requires order-table confirmation

📋 参考代替品(カタログ未掲載)

LPC2124FBD64-S

✅ ドロップイン
📦 LQFP-64
Same LPC2124 core, 60 MHz class and 256 KB flash; manufacturer suffix identifies a distinct ordering configuration

📋 参考代替品(カタログ未掲載)

LPC2122FBD64

✅ ドロップイン ⚠️ 仕様未検証
📦 LQFP-64
Same LQFP-64 family footprint; flash capacity and peripheral configuration differ from the target's 256 KB configuration and require validation

📋 参考代替品(カタログ未掲載)

LPC2129FBD64

✅ ドロップイン ⚠️ 仕様未検証
NXP Semiconductors
📦 LQFP-64
16/32-bit microcontroller · Arm7TDMI-S · 60 MHz · 256 KB · 256K x 8 · 10 bit · Yes · ISP and IAP

価格はお問い合わせください

データシートを見る →

LPC2136FBD64

✅ ドロップイン ⚠️ 仕様未検証
📦 LQFP-64
Same LQFP-64 family footprint and 60 MHz-class Arm7TDMI-S architecture; memory and peripheral mapping differ from the 256 KB LPC2124 target

📋 参考代替品(カタログ未掲載)

LPC2124FBD64 最大定格&電気的特性

CPU Core Arm7TDMI-S 16/32-bit
Maximum CPU Frequency 60 MHz
Flash Memory 256 KB
SRAM 16 KB
General-Purpose I/O Lines 46
ADC Resolution 10 bit
電源電圧 3.3 V
パッケージ 64-pin LQFP, 10 mm x 10 mm
Terminal Pitch 0.50 mm
Memory Interface Width 128 bit
Programming Support ISP/IAP flash
Debug Features Real-time emulation and embedded trace
動作温度 -40 °C to +85 °C for LPC2124FBD64/00,15
Technology CMOS
Architecture 32-bit code execution with accelerator architecture
実装タイプ Surface mount
RoHS ステータス unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

LPC2124FBD64 64-pin lqfp, 10 mm x 10 mm ピン配置ガイド

LPC2124FBD64 (64-pin lqfp, 10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

LPC2124FBD64 の 64-pin lqfp, 10 mm x 10 mm パッケージピン配置図

詳細なピン配置データはありません: LPC2124FBD64.

詳細は データシート をご参照ください。

主な用途

LPC2124FBD64 の用途: 6 件s: Industrial Automation Controller, Data Acquisition Unit, Serial Communications Gateway, Real-Time Monitoring System, Process and Motor Control, Embedded Communication Equipment.

🏭

Industrial Automation Controller

The LPC2124FBD64 fits compact industrial automation controllers because it combines a 60 MHz Arm7TDMI-S core, 256 KB of flash, 16 KB of SRAM, and 46 GPIO lines. The microcontroller can coordinate digital inputs, outputs, interlocks, and operator functions in one controller. Its 10-bit ADC supports process measurement when a sensor produces an analog voltage, while the 128-bit memory interface and accelerator architecture support responsive 32-bit execution. For an industrial board, use the exact manufacturer pin table, isolate external interface circuits, and confirm the required temperature suffix before deployment.

📟

Data Acquisition Unit

The LPC2124FBD64 is suitable for a compact data-acquisition unit where sensor conditioning must be combined with local control. Its 10-bit ADC can digitize suitable analog inputs, while 46 GPIO lines permit multiplexed digital channels, status indicators, and control outputs. The 256 KB flash stores application firmware and calibration parameters, and the 16 KB SRAM supports acquisition buffers and communication state. Place analog and digital return paths carefully, reference the datasheet for ADC input limits, and include external conditioning when the sensor output exceeds the MCU input range.

🌐

Serial Communications Gateway

The LPC2124FBD64 can serve as a protocol gateway because the 60 MHz Arm7TDMI-S processor provides more than enough speed for multiple UART, SPI, or I2C-oriented tasks. Its 256 KB flash accommodates gateway firmware and protocol tables, while 16 KB SRAM supports message buffering. The 46 GPIO lines leave configuration and status-control resources available. Firmware should include protocol timeouts, CRC checks, and controlled buffering because the MCU does not provide an Ethernet interface directly. Validate each peripheral mapping and interrupt priority against the LPC2124 datasheet before releasing the PCB.

🧩

Real-Time Monitoring System

The LPC2124FBD64 fits real-time monitoring equipment that must sample inputs and report status without a separate processor. The Arm7TDMI-S core executes at up to 60 MHz, while the 10-bit ADC supports analog measurement and the 46 GPIO lines support digital sensors, alarms, and local controls. Embedded trace and real-time emulation features assist firmware development and diagnostics. A practical design should define sampling deadlines, isolate high-current outputs from sensitive analog paths, and use the manufacturer's recommended oscillator and decoupling arrangements to maintain predictable timing.

⚡

Process and Motor Control

The LPC2124FBD64 supports process-control or motor-control subsystems where deterministic execution, ample I/O, and mixed analog/digital functions are valuable. The 60 MHz core can execute control logic while 46 GPIO lines operate discrete inputs, outputs, and fault signals; the 10-bit ADC can monitor analog process or feedback signals. The 128-bit memory interface and accelerator architecture improve execution efficiency for 32-bit code. Choose external driver transistors or gate drivers for power stages, preserve separation between sensing and switching paths, and verify timing against the MCU’s operating limits.

📡

Embedded Communication Equipment

The LPC2124FBD64 can be used in embedded communication equipment requiring a 32-bit processor, local protocol handling, and flexible serial connectivity. Its 256 KB flash supports embedded firmware, while 16 KB SRAM and the 60 MHz Arm7TDMI-S core provide room for message and control processing. The 46 GPIO lines can support modem control, link indicators, and configuration signals. Firmware development should take advantage of real-time emulation and embedded trace for task scheduling and interrupt analysis. Power sequencing, connector protection, and signal conditioning must be designed around the external communications hardware rather than assumed from the MCU specifications.

What is the LPC2124FBD64?
The LPC2124FBD64 is a NXP Semiconductors 16/32-bit Arm7TDMI-S microcontroller optimized for embedded real-time control. According to the NXP product page, it operates up to 60 MHz and combines a 128-bit memory interface with an accelerator architecture supporting 32-bit code execution. The device includes 256 KB of embedded high-speed flash and is packaged in LQFP-64.
What are the key specifications of LPC2124FBD64 that engineers should know?
The LPC2124FBD64 combines a 60 MHz Arm7TDMI-S core, 256 KB of flash, 16 KB of SRAM, 46 GPIO lines, and a 10-bit ADC in a 64-pin LQFP package. According to the NXP product information, its 128-bit memory interface and accelerator architecture support efficient 32-bit execution. The package uses a 0.50 mm terminal pitch and operates from a 3.3 V CMOS supply.
How much memory does LPC2124FBD64 have?
The LPC2124FBD64 contains 256 KB of embedded high-speed flash memory and 16 KB of SRAM. According to the NXP LPC2124 product page, the flash supports ISP and IAP operation, allowing firmware programming and field-update workflows. The available SRAM is suitable for stack, buffers, protocol state, and application variables, while the flash provides substantially more space for executable code and constants.
What is the maximum clock frequency of LPC2124FBD64?
The LPC2124FBD64 has a maximum CPU clock frequency of 60 MHz. According to the NXP product information, the Arm7TDMI-S core supports 32-bit code execution at the maximum clock rate through its 128-bit memory interface and accelerator architecture. Actual timing margins in a finished design remain dependent on the specified clock configuration, power conditions, and the manufacturer’s operating guidelines.
Where can I download the LPC2124FBD64 datasheet PDF?
The LPC2124FBD64 datasheet can be downloaded from the official NXP product page for this exact device or through the linked manufacturer datasheet resources. The manufacturer product page is the preferred starting point because it identifies the LPC2124 family documentation and ordering information. Use the pin-description and electrical-characteristics tables there when assigning signals, selecting decoupling, and checking operating limits.
Where can I find the LPC2124FBD64 pinout?
The LPC2124FBD64 pinout is defined in the manufacturer datasheet’s pin-description table for the 64-pin LQFP package. Use that table when assigning all 64 positions, including power, ground, reset, clock, programming, analog, and I/O functions. Because the complete public pin list is not reproduced on this page, PCB engineers should cross-check every net against the official LPC2124 documentation before fabrication.
Does LPC2124FBD64 include an ADC?
Yes, the LPC2124FBD64 includes a 10-bit analog-to-digital converter. The NXP LPC2124 family description identifies the 10-bit ADC alongside 128/256 KB ISP/IAP flash. This converter allows the MCU to measure analog inputs directly, reducing external signal-conditioning requirements in process-control, monitoring, and sensor-interface designs. Input range, sampling behavior, and acquisition timing should be confirmed in the datasheet.
Where can I buy LPC2124FBD64 and check its stock?
Use the Request a Quote form on this page to request LPC2124FBD64 availability, current lead time, and ordering assistance. The form is the appropriate route for quote-based purchasing without relying on a stale stock count. Submit the exact LPC2124FBD64 ordering code and specify the required quantity, delivery destination, and packaging preference so the request can be evaluated accurately.
What is the price of LPC2124FBD64?
Submit a Request a Quote form on this page for a current LPC2124FBD64 quotation and volume pricing. The quote request should identify the exact MPN, package, target quantity, and shipment destination. This approach avoids publishing a transient price that may not reflect the requested quantity, date, tax treatment, or delivery terms for your specific procurement request.
What is the lead time for LPC2124FBD64?
Request the current LPC2124FBD64 lead time through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, package form, and destination, so it should be confirmed for the exact ordering code rather than inferred from a generic family listing. Include your requested delivery date and quantity in the same request to obtain a practical schedule.
Is LPC2124FBD64 in stock?
The LPC2124FBD64 should be checked through the Request a Quote form on this page for current availability. Because stock and allocation can change, a purchasing request tied to the exact MPN and required quantity is more reliable than a general product-page status. Specify any required date-critical production schedule in the request so the supplier can confirm allocation and delivery timing.
LPC2124FBD64 vs LPC2124FBD64/01,15 - which is better?
The LPC2124FBD64 is the base ordering designation, while LPC2124FBD64/01,15 identifies a specific ordering variant with documented -40 °C to +85 °C operating limits and 60 MHz operation. According to the NXP ordering information represented by the manufacturer results, both provide 256 KB flash in the 64-LQFP arrangement. Selection should follow the exact suffix and qualification requirements in the LPC2124 ordering information.
What is the difference between LPC2124FBD64 and LPC2124FBD64-S?
LPC2124FBD64 and LPC2124FBD64-S identify related NXP orderable versions of the same LPC2124 family, with the suffix defining the manufacturer’s specific packing or ordering configuration. Both results identify a 60 MHz-class ARM7 microcontroller with 256 KB flash. The exact suffix meaning must be taken from the NXP ordering table before treating one as interchangeable with the other.
When should I choose LPC2124FBD64 instead of a different LPC21xx device?
Choose LPC2124FBD64 when an existing design specifically requires the 60 MHz Arm7TDMI-S configuration, 256 KB flash, 16 KB SRAM, 46 GPIO lines, and the LQFP-64 footprint. A different LPC21xx model should be selected only after checking memory size, peripheral availability, clock limits, pin assignments, and startup behavior. The package similarity alone does not establish software or pin-level compatibility.
What is the best drop-in replacement for LPC2124FBD64?
No unqualified third-party drop-in replacement can be confirmed from the available cross-reference information. The closest same-manufacturer options are LPC2124FBD64/01,15 and LPC2124FBD64-S, which retain the LPC2124 identity, 256 KB flash, 60 MHz class, and LQFP-64 format. Treat exact suffix, temperature grade, packing code, firmware behavior, and pinout as controlled checks rather than assuming interchangeability.
Can an LPC2122, LPC2129, or LPC2136 replace LPC2124FBD64?
Those devices are related LPC21xx-family candidates, but they cannot be declared drop-in replacements without validating their exact package, pin assignment, memory capacity, voltage, peripheral map, and startup requirements. According to the available NXP family information, the LPC2124 specifically combines 256 KB flash with a 60 MHz Arm7TDMI-S core. Use the manufacturer’s LPC21xx selection and pin-comparison documentation before approving a substitution.
Is LPC2124FBD64 suitable for industrial and embedded control applications?
The LPC2124FBD64 is suitable for embedded-control applications that need a 60 MHz Arm7TDMI-S core, 256 KB flash, 16 KB SRAM, extensive I/O, and analog measurement. The NXP family information confirms real-time emulation, embedded trace, ISP/IAP flash, and a 10-bit ADC. For industrial deployment, confirm the exact temperature suffix, regulatory requirements, long-term availability, and peripheral requirements during component selection.

エンジニアリング参考データ: LPC2124FBD64 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the LPC2124FBD64 when maintaining a design that specifically depends on its 60 MHz Arm7TDMI-S core, 256 KB flash, 16 KB SRAM, 46 GPIO lines, 10-bit ADC, and LQFP-64 layout. The LPC2124FBD64/01,15 is the closest documented ordering option when its -40 °C to +85 °C range matches the deployment requirement. LPC2124FBD64-S is suitable only after its manufacturer suffix and packing definition are confirmed. For new designs that can accept a redesigned PCB or firmware port, newer microcontroller families may offer better long-term availability and broader peripheral support, but they are not pin-compatible substitutes. LPC2122, LPC2129, and LPC2136 require explicit memory, pin, peripheral, and firmware checks before replacement is approved.

代替品との比較

パラメータ この製品 LPC2124FBD64/01,15 LPC2124FBD64-S LPC2122FBD64 LPC2129FBD64 LPC2136FBD64
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-pin LQFP, 10 mm x 10 mm, 0.50 mm pitch 64-pin LQFP 64-pin LQFP 64-pin LQFP family package 64-pin LQFP family package 64-pin LQFP family package
CPU Core Arm7TDMI-S 16/32-bit Arm7TDMI-S 16/32-bit Arm7TDMI-S 16/32-bit Arm7TDMI-S 16/32-bit Arm7TDMI-S 16/32-bit Arm7TDMI-S 16/32-bit
Programming Support ISP/IAP flash ISP/IAP flash ISP/IAP flash ISP/IAP flash family support ISP/IAP flash family support ISP/IAP flash family support

主な差別化要因

  • Higher flash capacity within the LPC2124 ordering family (vs LPC2122FBD64)
  • Defined 60 MHz operating point (vs LPC2129FBD64)
  • Established exact manufacturer ordering option (vs LPC2136FBD64)

設計ノート

Use the manufacturer LQFP-64 land pattern and verify every pin assignment against the LPC2124 pin-description table before routing. Keep the 0.50 mm pitch escape paths short and inspect the design for solder bridges on fine-pitch pads. Place input, output, and flash-bus routing away from switching nodes and high-current return paths. A pin-compatible package does not by itself establish that every peripheral signal has an identical alternate function.

The LPC2124FBD64 operates from a 3.3 V CMOS supply. Follow the manufacturer’s recommended power and decoupling network, placing each decoupling capacitor directly between the relevant power and ground pins with a short return path. Provide clean, stable source voltage for both core and I/O operation, and account for voltage drops across board traces. Do not derive supply limits from unrelated LPC21xx variants without checking the exact datasheet.

Separate analog and digital return currents carefully because the device includes a 10-bit ADC. Route analog inputs away from switching-node copper and digital clock lines, use a compact ground reference around the analog section, and avoid sharing narrow return paths between the ADC and high-current outputs. ADC accuracy depends on the selected external network and board noise environment, so validate the final layout with the system’s actual sensor and switching conditions.

Do not treat LPC2124FBD64, LPC2124FBD64/01,15, and LPC2124FBD64-S as interchangeable without checking the NXP ordering table, temperature grade, packing method, and marking scheme. Likewise, LPC2122, LPC2129, and LPC2136 share a broad family identity but may differ in memory, peripherals, and pin multiplexing. Preserve the original boot, clock, and ISP/IAP configuration when substituting a part into an existing design.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact LPC2124FBD64 ordering code in the manufacturer product information. AEC-Q100 is not applicable because this is not an automotive-qualified MCU variant.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

LPC2124FBD64 datasheet LPC2124FBD64 pinout LPC2124FBD64 datasheet pdf LPC2124FBD64 specifications LPC2124FBD64 price LPC2124FBD64 stock NXP LPC2124FBD64 LPC2124FBD64 LQFP-64 LPC2124FBD64 replacement LPC2124FBD64 equivalent LPC2124FBD64 vs LPC2124FBD64/01,15 LPC2124FBD64 ARM7TDMI-S LPC2124FBD64 256KB flash LPC2124FBD64 60MHz microcontroller

関連部品&用語

NXP Semiconductors LPC2124FBD64 LPC2124FBD64/01,15 LPC2124FBD64-S LPC2122FBD64 LPC2129FBD64 LPC2136FBD64 Arm7TDMI-S microcontroller MCU embedded controller semiconductor 32-bit processor 256 KB flash memory 16 KB SRAM 60 MHz 10-bit ADC 46 GPIO ISP IAP real-time emulation embedded trace LQFP-64 surface mount
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示