MAX14801CCM+T - 16-Channel High-Voltage Analog Switch | Analog Devices
部品番号: MAX14801CCM+T ✓ 生産中MAX14801CCM+T 概要
An analog switch is a semiconductor device that connects or disconnects signal paths under digital control. As a member of the MAX14800 through MAX14803 family, the MAX14801CCM+T belongs to the broader interface IC and analog switch hierarchy. Its 16 independently controlled channels provide a practical way to multiplex high-voltage sensor outputs into a downstream amplifier, converter, or processing chain while limiting the number of external components.
The principal benefits are the 16-channel switching architecture, low charge injection, high-voltage signal handling, and a digital control interface. A 48-pin surface-mount LQFP supports compact PCB layouts and automated assembly. The MAX14801 is identified as a commercial-temperature-grade component, making it suitable for equipment operating within commercial environmental conditions when the complete system maintains that grade.
The MAX14801 family uses high-voltage CMOS technology and includes an internal 16-bit shift register for serial control of the switching channels. Serial control reduces the number of package pins required for channel selection and allows a microcontroller or programmable logic device to configure the switch array. The family architecture supports applications requiring repeated routing among ultrasonic transducers, printer-head signals, and other high-voltage analog sources.
Typical uses include ultrasonic diagnostic imaging, industrial nondestructive testing, medical imaging, and high-voltage printer systems. In each case, the switch must preserve signal integrity while alternating connections among multiple channels. The MAX14801CCM+T is particularly appropriate where a 16-channel array, low charge injection, and a compact 48-pin package are central design requirements.
During schematic design, verify every signal amplitude against the family's absolute-maximum ratings and ensure that the digital interface levels match the controlling logic. Layout should keep high-voltage switching nodes physically separated from sensitive low-level paths, provide a solid ground reference, and route clock and control signals away from analog terminals. Use the manufacturer datasheet pin description and typical application circuit when assigning tracks and defining protection networks.
This product page combines the confirmed MAX14801CCM+T device identity, package information, family architecture, drop-in family alternatives, and practical design guidance. It is intended to help engineers move from part selection to PCB implementation while checking each family option against required voltage, timing, protection, and channel-control details.
ドロップイン代替品: MAX14801CCM+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX14801CCM+T (同一形状・フットプリント) — 相違点: Switch Configuration, Package, Charge Injection, Package Code, Process Technology.
MAX14800CCM+
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MAX14802CCM+
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MAX14803CCM+
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX14803ACCM+
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MAX14801CCM+T 最大定格&電気的特性
| Product Type | 16-channel high-voltage analog switch |
| Number of Channels | 16 channels |
| Switch Type | SPST |
| Charge Injection | Low |
| Control Interface | Digital serial interface |
| Internal Shift Register | 16 bits |
| Process Technology | High-voltage CMOS |
| Number of Terminals | 48 terminals |
| パッケージ | 48-LQFP (7 mm x 7 mm) |
| Package Code | QFP |
| Package Shape | Square |
| 実装タイプ | Surface mount |
| Temperature Grade | Commercial |
MAX14801CCM+T square ピン配置ガイド
MAX14801CCM+T (square パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX14801CCM+T.
詳細は データシート をご参照ください。
主な用途
MAX14801CCM+T の用途: 6 件s: Ultrasound Diagnostic Imaging, Industrial Nondestructive Testing, High-Voltage Printer Electronics, High-Voltage Analog Multiplexing, Medical Signal Routing, Automated Test Equipment.
Ultrasound Diagnostic Imaging
The MAX14801CCM+T fits ultrasound imaging systems that must route a group of high-voltage analog signals through a controlled switching matrix. Its 16 channels provide a compact way to connect multiple sensing paths, while the low-charge-injection architecture reduces control-induced disturbance. The device is used between transducer-related signal paths and downstream amplification or processing electronics. Engineers should confirm that each analog node remains within the family voltage limits and that the serial control timing meets the system scan rate. Because the MAX14801 does not include the identified 35 kΩ terminal bleed resistors of MAX14803, applications needing active charge removal after switching should evaluate that family option or an external discharge strategy.
おすすめ
Industrial Nondestructive Testing
The MAX14801CCM+T can organize multiple high-voltage probe channels in industrial ultrasonic inspection equipment. Sixteen channels make it possible to share downstream receiver and processing circuitry across several transducers, reducing repetitive analog front-end sections. Low charge injection is valuable when low-amplitude return signals must retain integrity during channel selection. Place the switch near the probe interface and keep the serial clock, latch, and data traces away from sensitive analog nodes. Validate switching duration, leakage, off-state isolation, and allowable signal amplitude against the family electrical tables for the specific test standard and transducer excitation scheme.
おすすめ
High-Voltage Printer Electronics
The MAX14801CCM+T is suitable for high-voltage printer electronics that distribute multiple controlled analog or drive-related signals across a wide package. Its 16 channels allow a controller to select signal paths through a serial interface while maintaining a compact 48-LQFP footprint. Low charge injection supports clean transitions when the downstream circuit responds to every selection event. The layout should use a continuous ground plane, separate high-voltage routing from logic, and place protection components where switching transients are expected. Review the absolute-maximum ratings and recommended operating conditions for every printer head operating mode before releasing the circuit.
おすすめ
High-Voltage Analog Multiplexing
The MAX14801CCM+T can serve as a 16-way analog multiplexer when a system must choose among high-voltage sources that feed a shared downstream amplifier. The internal 16-bit shift register and digital control interface reduce the number of package pins required for channel selection, which is advantageous in dense instrumentation. Designers should establish the required settling interval between selection commands and account for injected charge, leakage, and on-resistance. A solid ground reference and short protected analog routes help preserve signal fidelity. If residual voltage on disconnected terminals could affect accuracy, compare this option with MAX14803CCM+, which adds 35 kΩ discharge paths.
おすすめ
Medical Signal Routing
The MAX14801CCM+T can be used in medical signal-routing equipment where multiple controlled inputs must reach a shared analog processing stage. Its 16 low-charge-injection channels support compact multiplexing, while the commercial temperature grade must remain compatible with the intended ambient conditions of the finished instrument. Signal-chain design should minimize leakage, isolate switching nodes from precision circuitry, and establish whether medical-specific qualification requirements apply to the finished equipment. Review the manufacturer's electrical limits rather than inferring safety compliance from the IC's general application description. If the system requires controlled discharge of long-lived capacitive nodes, the MAX14803 family's bleed resistors may provide a better fit.
おすすめ
Automated Test Equipment
The MAX14801CCM+T can organize a 16-channel high-voltage routing network in automated test equipment where many DUT connections must share a smaller number of downstream acquisition paths. Serial control allows a microcontroller to change the active channel without allocating one host-controlled line per signal. Because the device is intended for high-voltage switching, leakage, switching transients, and terminal loading must be included in the measurement uncertainty budget. Use short analog paths, maintain a low-impedance ground, and isolate control traces from the analog array. MAX14803CCM+ should be evaluated when discharged terminal voltage would otherwise create a systematic measurement error between test cycles.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX14801CCM+T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX14800CCM+ | MAX14802CCM+ | MAX14803CCM+ | MAX14803ACCM+ |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) |
| Channel Count | 16 channels | 16 channels | 16 channels | 16 channels | 16 channels |
| Control Interface | Digital serial interface with 16-bit shift register | Digital interface | Digital interface | Digital interface with 16-bit shift register | Digital interface with 16-bit shift register |
| Primary Applications | Ultrasound imaging and printers | Ultrasound imaging and printers | Ultrasound imaging and printers | Ultrasound imaging and printers | Ultrasound imaging and printers |
| Charge Injection | Low charge injection | Low charge injection | Low charge injection | Low charge injection | Low charge injection |
主な差別化要因
- Provides the basic 16-channel switch without the identified terminal bleed resistors (vs MAX14803CCM+)
- Avoids the dedicated positive-overvoltage clamping feature of MAX14802 (vs MAX14802CCM+)
- Maintains the compact 16-channel, 48-pin family architecture (vs MAX14800CCM+)
設計ノート
Place the MAX14801CCM+T close to the protected high-voltage signal source and the shared downstream receiver or converter. Keep analog switch traces short and away from clock, latch, and data lines. Route the serial control bus as a compact group, maintain a continuous ground reference beneath the device, and avoid placing sensitive low-level traces parallel to the switched analog nodes.
Determine the required settling time from the measured charge injection, on-resistance, load capacitance, and leakage of the complete signal path. If residual voltage on a disconnected node can corrupt the next measurement, compare MAX14801CCM+T with MAX14803CCM+, whose integrated 35 kΩ terminal bleed resistors discharge capacitive loads. Select the resistor-equipped variant only after considering the continuous loading it introduces.
Do not assume that all MAX14800-MAX14803 family members are functionally identical. MAX14802 includes clamping diodes for positive overvoltage, while MAX14803 and MAX14803A include 35 kΩ bleed resistors. Verify the selected variant against the required protection strategy, signal amplitude, timing, leakage, and operating-temperature conditions before treating it as a drop-in substitute.
Use the 48-LQFP land pattern and fanout directly from the manufacturer package drawing. Preserve access to all analog terminals and maintain symmetrical routing where possible. Keep the ground pins connected through a low-impedance plane rather than relying only on narrow traces, and review the layout for unintended coupling between adjacent high-voltage channels and the digital shift-register interface.
コンプライアンス情報
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated in the manufacturer-family information available for this part. The device is a commercial-grade interface IC rather than an AEC-Q100-qualified automotive product.