MAX14803CCM+T - 16-Channel High-Voltage Switch | ADI
部品番号: MAX14803CCM+T ✓ 生産中MAX14803CCM+T 概要
A high-voltage analog switch is an integrated circuit that routes external signals between internal circuits while isolating inactive channels. The MAX14803CCM+T belongs to the broader analog switch and multiplexer hierarchy within interface ICs. Its 16 independently addressed SPST switches allow a controller to select high-voltage imaging or print signals while limiting charge injection into sensitive measurement channels.
The MAX14803 family uses high-voltage CMOS technology to combine 16 high-voltage, low-charge-injection SPST switches with a digital serial interface. Control data is clocked into a 16-bit internal shift register, retained by a programmable latch, and managed through enable and clear inputs. This architecture supports deterministic channel selection across multichannel ultrasonic and printing systems.
The principal electrical characteristics include 48 ohm on-resistance, 3500 ns turn-on time, 3500 ns turn-off time, and operation from 2.7 V to 5.5 V. The commercial operating-temperature range is -40 C to +85 C. The 48-LQFP surface-mount package provides 48 terminals for external channel connections, logic control, supply rails, and ground returns.
Typical applications include ultrasonic medical imaging, industrial ultrasonic inspection, high-voltage printhead and printer signal switching, and multichannel test systems. The 16-channel architecture reduces the number of discrete high-voltage switching elements required, while the digital interface simplifies coordinated channel updates. Low charge injection is particularly important when the switched signals feed precision amplifiers or measurement front ends.
Designers should place input and output return paths carefully to minimize coupling between the 16 switched channels. Verify the allowable signal voltage, off-state isolation, and switching timing against the manufacturer datasheet before using the device outside ultrasonic-imaging or printer signal chains. Confirm that board-level timing provides sufficient setup and hold margin around latch, enable, clock, and clear signals.
This product page combines the manufacturer device description with application guidance, package details, verified parameter values, and practical comparisons with closely related MAX14802 and MAX14803A family members. It supports faster component selection by separating confirmed electrical characteristics from parameters that must be checked in the manufacturer datasheet before layout or production release.
ドロップイン代替品: MAX14803CCM+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX14803CCM+T (同一形状・フットプリント) — 相違点: Number of Channels, Switch Configuration.
MAX14803ACM+T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MAX14802CCM+T
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX14802ACM+T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MAX14803CCM+T 最大定格&電気的特性
| Number of Channels | 16 channels |
| Switch Configuration | 16 SPST switches |
| On-Resistance | 48 ohm |
| 電源電圧 | 2.7 V to 5.5 V |
| Turn-On Time | 3500 ns |
| Turn-Off Time | 3500 ns |
| 動作温度 | -40 C to +85 C |
| Process Technology | HVCMOS |
| Control Architecture | 16-bit serial shift register with programmable latch, enable, and clear inputs |
| Number of Terminals | 48 terminals |
| パッケージ | 48-LQFP (7 mm x 7 mm) |
| 実装タイプ | Surface mount |
| Isolation | 50 dB |
| Primary Application | Ultrasonic imaging and printer signal switching |
MAX14803CCM+T 48-lqfp (7 mm x 7 mm) ピン配置ガイド
MAX14803CCM+T (48-lqfp (7 mm x 7 mm) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX14803CCM+T.
詳細は データシート をご参照ください。
主な用途
MAX14803CCM+T の用途: 6 件s: Ultrasonic Medical Imaging, Industrial Ultrasonic Inspection, High-Voltage Printer Signal Routing, Multichannel Test and Measurement, High-Voltage Signal Multiplexing, Precision Measurement Front Ends.
Ultrasonic Medical Imaging
MAX14803CCM+T fits multichannel ultrasonic imaging front ends that require coordinated routing of high-voltage transducer signals. Its 16 SPST switches reduce the number of separate discrete switching networks, while the 48 ohm on-resistance and 3500 ns switching times provide defined electrical behavior for receive-path multiplexing. The manufacturer identifies ultrasonic imaging as a primary application and emphasizes low charge injection, which helps limit unwanted transients at sensitive receiver inputs. Confirm the maximum switched voltage, off-state isolation, leakage, and timing margin for the selected imaging architecture before release.
おすすめ
Industrial Ultrasonic Inspection
MAX14803CCM+T is suitable for phased-array and industrial ultrasonic inspection systems that switch multiple high-voltage channels around transducers, pulser circuitry, and receiver amplifiers. Sixteen serially controlled SPST channels allow one internal shift register to coordinate channel selection, while the 48 ohm on-resistance and 3500 ns turn-on and turn-off times provide useful design limits. For equipment operating near high-power stages, preserve controlled return paths and verify channel-to-channel isolation and allowable signal voltage in the manufacturer datasheet.
おすすめ
High-Voltage Printer Signal Routing
MAX14803CCM+T can route multiple high-voltage signals in printer and printhead systems where discrete switch complexity would be difficult to manage. The device provides 16 low-charge-injection SPST switches, a 48 ohm on-resistance, and 3500 ns transition times in a 7 mm by 7 mm LQFP. These characteristics support coordinated multichannel routing when the printhead waveform, load capacitance, and permissible voltage are checked against the family limits. Keep clock, latch, enable, and clear traces away from sensitive switched-node paths.
おすすめ
Multichannel Test and Measurement
MAX14803CCM+T is appropriate for multichannel test systems that need to route controlled high-voltage signals to instrumentation or DUTs. Its 16 SPST channels provide scalable routing without requiring 16 separately controlled switch packages, and the serial shift-register architecture simplifies deterministic pattern sequencing. The 2.7 V to 5.5 V logic supply and 3500 ns switching times define the operating envelope for fixture timing. Before selecting it, confirm maximum signal voltage, leakage, isolation, and charge injection against the measurement accuracy requirement.
おすすめ
High-Voltage Signal Multiplexing
MAX14803CCM+T can serve as a multichannel high-voltage signal multiplexer when one of 16 SPST paths must connect to a shared downstream circuit. The 48 ohm on-resistance establishes the nominal path impedance, while the 3.5 us switching interval defines the maximum transition behavior at the specified test conditions. Serial control allows the routing pattern to be loaded into the 16-bit shift register and retained by the latch. Validate signal amplitude, common-mode range, and timing against the exact measurement and control circuitry before implementation.
おすすめ
Precision Measurement Front Ends
MAX14803CCM+T is useful ahead of precision measurement amplifiers when multiple input channels require switching and low injected charge is important. The manufacturer specifically describes the MAX14803 family as offering low-charge-injection SPST switches, helping reduce control-induced transients at sensitive inputs. Its 48 ohm on-resistance and 3500 ns switching times should be included in the complete settling-time analysis. Designers must also account for input capacitance, leakage, channel isolation, and any downstream amplifier recovery time after each transition.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX14803CCM+T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX14803ACM+T | MAX14802CCM+T | MAX14802ACM+T |
|---|---|---|---|---|
| Package | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 16 channels | 16 channels | 16 channels | 16 channels |
| Switch Configuration | 16 SPST switches | 16 SPST switches | 16 SPST switches | 16 SPST switches |
| Process Technology | HVCMOS | HVCMOS | HVCMOS | HVCMOS |
| Primary Applications | Ultrasonic imaging and printers | Ultrasonic imaging and printers | Ultrasonic imaging and printers | Ultrasonic imaging and printers |
主な差別化要因
- Defined multichannel switching performance (vs MAX14802CCM+T)
- Same 48-channel LQFP mechanical outline (vs MAX14803ACM+T)
- Compact 16-channel integration (vs MAX14802ACM+T)
設計ノート
Route each switched channel with a continuous reference path and keep clock, latch, enable, and clear traces away from high-voltage and high-impedance analog nodes. Place the device close to the interface that requires switching so loop area remains small. Use the manufacturer pin-description table and recommended layout in the MAX14802-MAX14803A datasheet when assigning the 48 LQFP terminals.
Include the 3500 ns turn-on and turn-off times in the receiver settling calculation rather than assuming the digital latch command equals valid analog settling. Account for downstream amplifier recovery, node capacitance, path resistance, and the 48 ohm switch resistance. This is especially important in ultrasonic channels where residual transients can affect subsequent measurements.
Decouple the 2.7 V to 5.5 V supply following the manufacturer recommendations and keep switching-node return currents from sharing paths with sensitive analog returns. Confirm the exact supply pins and capacitor configuration from the family datasheet before layout. Separate logic and switched-signal routing where practical to reduce control-edge coupling.
Do not substitute a family member based only on its 48-LQFP outline. MAX14803A and MAX14802 variants can differ in signal-voltage limits, timing, qualification, or other channel specifications. Compare the pin description, electrical characteristics, and absolute maximum ratings for both devices before approving a drop-in replacement.
コンプライアンス情報
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the listed technical descriptions. AEC-Q100 is not applicable because MAX14803CCM+T is an analog switch IC rather than an automotive-qualified device.