Analog Devices

MAX202EESE+ 5V RS-232 Transceiver, 16-SOIC | Analog Devices

部品番号: MAX202EESE+ ✓ 生産中
+5 V Vdss EIA/TIA-232E and CCITT V.28 Rds(on) 16-pin SOIC Package
MOQ: 1 |

MAX202EESE+ 概要

Analog Devices MAX202EESE+ is a +5 V RS-232 line transceiver with two drivers and two receivers, ±15 kV ESD protection, and operation up to 120 kbps in a 16-pin SOIC package. The MAX202E family converts TTL/CMOS logic levels to EIA/TIA-232 and V.28 signals while integrated charge-pump circuitry supports operation from a single +5 V supply.

An RS-232 transceiver is an interface circuit that connects a digital controller or UART to a serial communications link. It belongs to the interface IC hierarchy, where a line transceiver combines a transmitter for outbound data with a receiver for inbound data. The MAX202EESE+ provides the electrical conversion, voltage levels, and ESD protection required between low-voltage digital logic and a ±RS-232 communications port.

The device includes two driver channels and two receiver channels, allowing one RS-232 port to support bidirectional serial communication through four signal pins. Its integrated charge pump generates the bipolar voltage levels required by RS-232 without a separate negative supply. The manufacturer specifies EIA/TIA-232E and CCITT V.28 operation at data rates up to 120 kbps when loaded.

Electrical robustness is addressed by ±15 kV human-body-model ESD protection on the serial-interface pins. This protection improves tolerance for cable insertion, removal, and electrostatic discharge encountered in industrial equipment. Operating from a single +5 V rail also simplifies power architecture in systems where a negative supply would otherwise be required.

Typical uses include industrial serial consoles, instrumentation, data acquisition, point-of-sale equipment, security systems, and embedded control boards. The dual-driver, dual-receiver arrangement is particularly useful for systems that exchange commands and status data over one RS-232 connection while also supporting hardware handshaking signals.

PCB design should provide adequate bypass capacitance at the supply pins and route serial traces away from sensitive analog or high-speed digital nodes. Decoupling capacitors must be placed close to the device to minimize supply-current transients during edge transitions. The external connector and cable remain exposed to electrostatic discharge, so board-level grounding and enclosure design should supplement the IC's internal ESD protection.

This page combines the manufacturer's electrical capabilities with package-specific comparison data, replacement guidance, and practical PCB implementation notes. It is intended to help engineers identify whether the MAX202EESE+ fits a +5 V RS-232 design and how to evaluate compatible alternatives before committing a board layout.

ドロップイン代替品: MAX202EESE+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX202EESE+ (同一形状・フットプリント) — 相違点: Product Type, ESD Protection, Supply Voltage, Interface Standard, Maximum Data Rate.

Maxim Integrated
Product Type: RS-232 transceiver
Maximum Data Rate: 120 kbit/s
比較対象 MAX202EESE+ →
Maxim Integrated
Product Type: 2/2 RS-232 transceiver
Supply Voltage: 5 V
比較対象 MAX202EESE+ →
Analog Devices
ESD Protection: ±15kV HBM
Supply Voltage: +5V
Interface Standard: RS-232
比較対象 MAX202EESE+ →
Analog Devices
Product Type: Dual RS-232 transceiver
比較対象 MAX202EESE+ →
Analog Devices
Supply Voltage: 5 V
Interface Standard: EIA/TIA-232E
比較対象 MAX202EESE+ →
Analog Devices
Product Type: Dual RS-232 line transceiver
ESD Protection: ±15 kV
比較対象 MAX202EESE+ →
Texas Instruments
Product Type: 5 V dual RS-232 line driver/receiver
ESD Protection: ±15 kV human-body-model protection
Supply Voltage: 5 V nominal
比較対象 MAX202EESE+ →
Analog Devices
Product Type: Dual RS-232 transceiver with integrated charge pump
ESD Protection: 15 kV
Interface Standard: EIA/TIA-232E and CCITT V.28
比較対象 MAX202EESE+ →

MAX202IDR

✅ ドロップイン
Texas Instruments
📦 16-SOIC
5 V dual RS-232 line driver/receiver · 2 line drivers and 2 line receivers · 120 kbps · 5 V nominal · -40 °C to +85 °C · ±9 V · ±15 kV human-body-model protection · Four 0.1 µF capacitors

価格はお問い合わせください

データシートを見る →

MAX203EESE+

✅ ドロップイン ⚠️ 仕様未検証
📦 16-SOIC
Same-brand MAX202E-family +5 V 2/2 RS-232 architecture in a 16-pin SOIC package; enable and shutdown behavior must be checked before substitution.

📋 参考代替品(カタログ未掲載)

MAX206EESE+

✅ ドロップイン ⚠️ 仕様未検証
📦 16-SOIC
Same-brand MAX202E-family +5 V RS-232 interface with the same 2/2 channel count and 16-pin SOIC footprint; auxiliary control functions differ and require verification.

📋 参考代替品(カタログ未掲載)

MAX232EESE+

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

価格はお問い合わせください

データシートを見る →

MAX206EAG+T

✅ ドロップイン
📦 16-SOIC
A documented MAX202EESE replacement candidate with the same 2/2 RS-232 channel count and 16-pin SOIC package; control and fail-safe behavior must be checked.

📋 参考代替品(カタログ未掲載)

MAX202EESE+ 仕様

Product Type RS-232 line transceiver
Number of Drivers 2
Number of Receivers 2
電源電圧 +5 V
Maximum Data Rate 120 kbps
ESD Protection ±15 kV HBM
Standards Compatibility EIA/TIA-232E and CCITT V.28
パッケージ 16-pin SOIC
ピン数 16 pins
実装タイプ Surface mount
Charge Pump Integrated
Number of Transceiver Channels 2 driver and 2 receiver channels

MAX202EESE+ 16-pin soic ピン配置ガイド

MAX202EESE+ (16-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX202EESE+ の 16-pin soic パッケージピン配置図

詳細なピン配置データはありません: MAX202EESE+.

詳細は データシート をご参照ください。

主な用途

MAX202EESE+ の用途: 6 件s: Industrial Serial Console, Instrumentation and Data Acquisition, Point-of-Sale Terminal, Security and Access-Control Equipment, Embedded Control Board, Legacy Equipment Upgrade.

🏭

Industrial Serial Console

The MAX202EESE+ fits an industrial console because it converts between controller logic and RS-232 using two drivers and two receivers while operating from a single +5 V rail. Its integrated charge pump eliminates the need for a separate negative supply, and its ±15 kV HBM protection adds transient tolerance at connector-facing pins. A typical circuit places supply-decoupling capacitors beside VCC and GND while routing the four line-driver and receiver connections to the serial connector. The 120 kbps maximum data rate is suitable for configuration links, status exchanges, and service protocols that do not require high-speed differential signaling. Verify the board’s operating-temperature grade and complete the enclosure’s electrostatic and EMC validation before deploying the interface in an industrial environment.

🔧

Instrumentation and Data Acquisition

The MAX202EESE+ is suitable for connecting a data-acquisition controller to RS-232 instruments because two drivers and two receivers support bidirectional commands and measurements. The +5 V supply requirement simplifies integration with controller logic that already operates from +5 V, while the integrated charge pump provides the bipolar RS-232 signaling required by the remote device. Its capability up to 120 kbps covers many legacy measurement protocols and avoids a separate negative rail around the interface IC. Place the bypass capacitor close to the supply pins and keep the serial traces away from analog input nodes to prevent switching transients from disturbing measurements. Confirm line-driver levels, receiver thresholds, and the complete pinout against the manufacturer datasheet before connecting laboratory or field equipment.

🏬

Point-of-Sale Terminal

A point-of-sale terminal can use the MAX202EESE+ for a compact bidirectional serial link to a printer, scanner, or customer display. The two transmitter channels and two receiver channels allow command traffic and status traffic to share one interface, while the 16-pin SOIC footprint supports dense controller-board layouts. Operation from one +5 V supply and the integrated charge pump reduce the number of external power rails. The ±15 kV HBM rating is useful when the serial connector is exposed to user-accessible equipment, although the connector shell, cable, and ground geometry still influence ESD performance. Keep the interface traces compact, provide local supply bypassing, and test the completed assembly for ESD and EMC compliance rather than treating IC protection as a complete system-level solution.

🛡️

Security and Access-Control Equipment

The MAX202EESE+ is appropriate for access-control and security equipment that uses a wired RS-232 port for configuration, event reporting, or diagnostics. Two drivers and two receivers provide bidirectional communication, while the single +5 V operation simplifies power design in embedded controller assemblies. Its ±15 kV HBM ESD protection improves robustness at an exposed communication port, and its operation up to 120 kbps covers common device-management protocols. The implementation should use a low-impedance ground return, controlled connector geometry, and grounded enclosure bonding to improve electrostatic-event performance. Confirm the device temperature grade, verify auxiliary-pin behavior, and validate the full interface through cables and connectors because propagation delay and protection behavior can differ from the bare IC test conditions.

🧩

Embedded Control Board

The MAX202EESE+ adds an industry-standard RS-232 port to an embedded control board without requiring a separate negative supply. Its two drivers and two receivers support full-duplex serial communication alongside UART pins that operate at TTL or CMOS levels. The integrated charge pump and ±15 kV HBM protection make the device appropriate for legacy service ports and equipment-to-equipment links. In a compact PCB, place the decoupling capacitor close to the power pins and route the transceiver path away from clocks, sensors, and high-speed memory. The 120 kbps limit should be checked against the protocol timing, especially if the original system uses unusual baud rates or long cables. Use the manufacturer pin description when assigning supply, enable, receiver-output, and driver-input signals.

🖥️

Legacy Equipment Upgrade

The MAX202EESE+ can modernize a legacy RS-232 interface when a board must retain a 16-pin SOIC footprint and +5 V supply architecture. Two drivers and two receivers match the common MAX202E channel arrangement, while integrated charge-pump circuitry simplifies conversion from controller logic to RS-232 levels. The documented MAX202IDR and MAX206EAG+T alternatives provide candidates for board reuse, but engineers should compare every pin and auxiliary function before substitution. Pay particular attention to shutdown polarity, fail-safe receiver state, enable timing, and line-driver amplitude. During retrofit, inspect connector pin numbering and ground continuity because legacy equipment often relies on chassis-ground behavior that differs from modern low-voltage grounding conventions.

おすすめ製品の概要

MAX202IDR Texas Instruments 使用用途: Industrial Serial Console, Instrumentation and Data Acquisition, Point-of-Sale Terminal, Embedded Control Board, Legacy Equipment Upgrade MAX206EAG+T RS-232 replacement candidate 使用用途: Industrial Serial Console, Security and Access-Control Equipment MAX203EESE+ Same-family RS-232 transceiver 使用用途: Instrumentation and Data Acquisition, Security and Access-Control Equipment, Legacy Equipment Upgrade MAX206EESE+ Same-family +5 V RS-232 transceiver 使用用途: Point-of-Sale Terminal MAX232EESE+ Analog Devices 使用用途: Embedded Control Board
Where can I buy MAX202EESE+ online?
Use the Request a Quote form on this page to request MAX202EESE+ pricing, stock, and order handling. The part is a 2/2 RS-232 transceiver in a 16-pin SOIC package from Analog Devices. A purchase request should specify the exact MAX202EESE+ ordering code, quantity, and required delivery packaging so the manufacturer part number remains unchanged.
What is the price of MAX202EESE+?
Current pricing for MAX202EESE+ is handled through the Request a Quote form on this page. The part is listed as a 16-SOIC RS-232 transceiver with two drivers, two receivers, and a single +5 V supply. Request the quotation with your required quantity and packaging so the commercial response reflects the correct production order.
What is the lead time for MAX202EESE+?
The current lead time for MAX202EESE+ should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, assembly packaging, and production scheduling. The exact ordering code MAX202EESE+ identifies the +5 V, 2-driver, 2-receiver RS-232 transceiver in a 16-pin SOIC package.
Is MAX202EESE+ in stock?
Stock for MAX202EESE+ is confirmed through the Request a Quote form on this page. Include the quantity, delivery date, and preferred packaging in the request. The device is an Analog Devices +5 V RS-232 transceiver with two drivers and two receivers in a 16-pin SOIC package.
What are the key specifications of MAX202EESE+ that engineers should know?
The MAX202EESE+ is a +5 V, dual-driver and dual-receiver RS-232 transceiver rated up to 120 kbps with ±15 kV HBM ESD protection. It uses integrated charge-pump circuitry and comes in a 16-pin SOIC package. According to the Analog Devices MAX202E product page, its drivers and receivers meet EIA/TIA-232E and CCITT V.28 requirements when loaded.
What is the MAX202EESE+ used for?
The MAX202EESE+ is used to connect TTL/CMOS digital logic to an RS-232 serial port. Its two drivers transmit outbound serial signals, while its two receivers accept inbound RS-232 signals and convert them to logic levels. The single +5 V supply and integrated charge pump suit industrial controllers, test equipment, data-acquisition systems, and embedded serial interfaces.
What is the operating voltage of MAX202EESE+?
The MAX202EESE+ operates from a single +5 V supply. The Analog Devices manufacturer product page identifies the MAX202E family as single +5 V RS-232 transceivers with integrated charge-pump circuitry. Its drivers provide EIA/TIA-232 and V.28-compatible signal levels at data rates up to 120 kbps when loaded.
How much ESD protection does MAX202EESE+ provide?
The MAX202EESE+ provides ±15 kV human-body-model ESD protection. According to the Analog Devices MAX202E family description, this protection is applied to the serial-interface side of the device. It improves transient tolerance at exposed connector traces, although the PCB, cable, connector, and enclosure still require appropriate electrostatic-discharge controls.
Where can I download the MAX202EESE+ datasheet PDF?
The MAX202EESE+ datasheet is accessible from the Analog Devices MAX202E product page linked in the Data Sources section. The manufacturer describes the MAX202E-MAX213E, MAX232E, and MAX241E families in one document. Use its electrical-characteristics table, pin description, and package drawings to verify board layout and operating limits before release.
Where can I find the MAX202EESE+ pinout?
Use the pin-description table and package drawing in the Analog Devices MAX202E manufacturer datasheet to assign the 16 SOIC connections. This page does not reproduce the complete pin map because the public result excerpts do not contain every pin name. The pinout diagram in the product datasheet is the authoritative reference for signal names, power pins, and exposed connections.
MAX202EESE+ vs MAX202IDR - which is better for a legacy RS-232 port?
The MAX202EESE+ and MAX202IDR are both presented as 2-driver, 2-receiver RS-232 interface devices with pin-to-pin serial connections, including ground. The MAX202IDR is identified as meeting TI A/EIA-232-F requirements. Choose the MAX202EESE+ when its +5 V, 16-pin SOIC implementation and manufacturer specifications match the original design; verify the complete pin table before substitution.
What is the best drop-in replacement for MAX202EESE+?
The MAX202IDR is the strongest documented replacement candidate because the comparison source explicitly describes it as a pin-to-pin RS-232 interface with two drivers, two receivers, and ESD protection. A second candidate is MAX206EAG+T, which is compared with MAX202EESE as a replacement. Confirm package dimensions, supply voltage, timing, and every pin connection against the manufacturer datasheets before production use.
Can MAX206EAG+T replace MAX202EESE+?
MAX206EAG+T is identified in a dedicated replacement comparison as an alternative to MAX202EESE, but final qualification depends on exact package, pin, and electrical compatibility. Both belong to the MAX202E-era RS-232 interface family and use a 16-pin SOIC format. Check driver and receiver counts, shutdown or fail-safe behavior, supply requirements, and line-driver output levels before accepting the substitution.
When should I choose MAX202EESE+ over MAX202IDR?
Choose the MAX202EESE+ when the design specifically requires the Analog Devices MAX202E implementation, a single +5 V supply, two drivers, two receivers, and a 16-pin SOIC footprint. MAX202IDR is a relevant pin-to-pin candidate for legacy interfaces, but the choice should follow a full pin-level and timing comparison rather than package appearance alone.
Is MAX202EESE+ suitable for industrial RS-232 equipment?
The MAX202EESE+ is suitable for many industrial RS-232 interfaces because it supports EIA/TIA-232E and V.28 signaling up to 120 kbps, includes ±15 kV HBM ESD protection, and operates from a single +5 V supply. Industrial suitability still depends on the required temperature grade, isolation strategy, enclosure grounding, connector selection, and electromagnetic-compatibility testing of the completed equipment.
What is the best Analog Devices equivalent for MAX202EESE+?
MAX202IDR is a documented pin-to-pin MAX202EESE+ alternative with two drivers, two receivers, and ESD-protected serial connections. MAX203EESE+ and MAX206EESE+ are additional members of the same Analog Devices MAX202E family that may fit simple +5 V RS-232 designs after pin-level verification. Choose MAX202EESE+ itself when its documented behavior is already qualified in the target system.

エンジニアリング参考データ: MAX202EESE+ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MAX202EESE+ when the design needs a +5 V, dual-driver and dual-receiver RS-232 interface in a 16-pin SOIC package and values the established MAX202E behavior. Its integrated charge pump removes the need for a negative supply, and ±15 kV HBM protection strengthens exposed connector interfaces. MAX202IDR is a strong documented pin-to-pin candidate when a legacy board must be converted to another available ordering code; compare its auxiliary functions and fail-safe behavior before approval. MAX203EESE+ is appropriate when its additional control behavior suits the system, while MAX206EESE+ and MAX232EESE+ offer same-family options with potentially different enable, shutdown, or fail-safe characteristics. MAX206EAG+T should be considered when the documented replacement relationship is useful, but package dimensions and every pin function still require verification. For new designs, base the final choice on the complete manufacturer pinout, timing tables, operating-temperature grade, and system ESD requirements rather than channel count alone.

代替品との比較

パラメータ この製品 MAX202IDR MAX203EESE+ MAX206EESE+ MAX232EESE+ MAX206EAG+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Product Type RS-232 line transceiver RS-232 line transceiver RS-232 line transceiver RS-232 line transceiver RS-232 line transceiver RS-232 line transceiver
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
ESD Protection ±15 kV HBM ±15 kV HBM ±15 kV HBM ±15 kV HBM ±15 kV HBM ±15 kV HBM

主な差別化要因

  • Four-channel RS-232 interface in a 16-pin SOIC footprint (vs MAX202IDR)
  • Single +5 V operation with integrated charge pump (vs MAX232EESE+)
  • 120 kbps RS-232 operation with high-level ESD protection (vs MAX206EAG+T)

設計ノート

Place the supply-bypass capacitor directly beside the MAX202EESE+ VCC and ground pins. The integrated charge pump creates edge-related supply current when the RS-232 drivers switch, so a long supply trace can create transient voltage on the logic rail. Use the capacitor value and placement specified in the manufacturer's application guidance, keep the loop area small, and provide a stable ground reference close to the device.

Route the four RS-232 line connections directly toward the connector while keeping them away from clocks, sensor inputs, crystal circuits, and memory buses. Maintain the intended ground-return path and avoid sharing narrow ground segments between the transceiver and sensitive analog circuitry. The ±15 kV HBM rating protects the IC's interface pins, but connector placement, chassis grounding, and cable design determine how much system-level stress reaches the device.

Do not substitute an RS-232 transceiver solely because it has a 16-pin SOIC package. Confirm pin names, driver inputs, receiver outputs, enable or shutdown behavior, fail-safe receiver state, supply voltage, and driver-output levels. MAX202IDR, MAX203EESE+, MAX206EESE+, MAX232EESE+, and MAX206EAG+T are relevant candidates, but each requires comparison with the complete MAX202EESE+ pin description before a drop-in decision is approved.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The '+' ordering suffix commonly identifies a lead-free ordering option, but no explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals statement was found in the cited manufacturer and distributor pages. Confirm these attributes against the current manufacturer product documentation before release.

データ検証日: 2026-11-13 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX202EESE+ datasheet MAX202EESE+ pinout MAX202EESE+ datasheet pdf MAX202EESE+ equivalent MAX202EESE+ replacement MAX202EESE+ cross reference MAX202EESE+ vs MAX202IDR MAX202EESE+ 16 SOIC MAX202EESE+ 120 kbps MAX202EESE+ price Analog Devices MAX202EESE+ MAX202EESE+ industrial RS-232

関連部品&用語

Analog Devices MAX202EESE+ MAX202IDR MAX203EESE+ MAX206EESE+ MAX232EESE+ MAX206EAG+T RS-232 transceiver line transceiver interface IC semiconductor EIA/TIA-232E CCITT V.28 ESD protection human body model integrated charge pump 16-SOIC SOIC family surface mount SMD industrial serial interface data acquisition single +5 V supply 120 kbps dual driver and dual receiver
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示