Maxim Integrated

MAX232CASE+ - 5V Dual RS-232 Transceiver | Maxim Integrated

部品番号: MAX232CASE+ ✗ 生産終了
4.5 V to 5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX232CASE+ 概要

Maxim Integrated MAX232CASE+ is a 5 V RS-232 transceiver with two drivers and two receivers, a maximum data rate of 120 kbps, and a 16-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for 0°C to 70°C commercial-temperature use. The MAX232CASE+ is an obsolete catalog designation, so procurement should focus on lifecycle confirmation and electrically qualified replacements rather than treating it as a new-design choice.

An RS-232 transceiver is an interface IC that converts between logic-level signals used by digital systems and the voltage levels defined for RS-232 communications. The MAX232 belongs to the broader line-driver and line-receiver hierarchy: it combines a dual transmitter, a dual receiver, and an internal charge-pump supply that develops the bipolar voltages required for RS-232 transmission. This integration allows a modern controller or programmable logic device to connect to a legacy serial port using a single 5 V supply.

The device provides two transmit channels and two receive channels in a full-duplex arrangement. Its maximum signaling rate is 120 kbps, while receiver hysteresis is 500 mV. The manufacturer describes the family as compliant with EIA/TIA-232E and V.28/V.24 interfaces, and the TI product page identifies ±9 V output levels and ±2 kV ESD protection for MAX232 devices. These characteristics make the interface suitable for control links, equipment communication, and legacy peripheral connections.

Internally, the charge pump generates positive and negative voltage rails from the 5 V supply. The external charge-pump capacitors must use adequate voltage ratings and low effective series resistance because ripple on those rails can affect transmitter behavior. The receiver section provides noise tolerance through its 500 mV hysteresis, helping reject small voltage disturbances on a slow or noisy serial connection. Pin-compatible family members differ principally in temperature grade, shutdown capability, or power characteristics.

Typical uses include industrial control panels, point-of-sale equipment, test systems, embedded instruments, and service ports that still use RS-232. For new designs, a currently supported family member should be preferred when its electrical ratings satisfy the application. For an existing MAX232CASE+ board, a replacement must match the 16-pin SOIC footprint, 5 V supply range, 2/2 channel configuration, capacitor connection pattern, and RS-232 signal levels.

The principal design caution is that the obsolete ordering code should not be assumed to be an active production option. Confirm lifecycle status, temperature requirements, and the exact capacitor network before committing a replacement to a new PCB. Also preserve the required charge-pump capacitor values and place them close to their associated pins to minimize loop area and supply ripple.

This page combines lifecycle information, interface specifications, drop-in family alternatives, application guidance, and PCB-focused engineering notes to support replacement planning. The comparison and design sections add practical selection context beyond the basic distributor listing, while the Request a Quote form supports current sourcing of the selected catalog number.

ドロップイン代替品: MAX232CASE+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX232CASE+ (同一形状・フットプリント) — 相違点: Interface Standard, Package, Product Type, Operating Temperature, RoHS Status.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Operating Temperature: 0 °C to +70 °C (C grade)
RoHS Status: Compliant
比較対象 MAX232CASE+ →
Analog Devices
Interface Standard: EIA/TIA-232E, V.28, V.24
Package: 16-SOIC narrow
Product Type: Dual RS-232 Transceiver
比較対象 MAX232CASE+ →
Maxim Integrated
Interface Standard: EIA/TIA-232E
Product Type: Dual RS-232 line driver and receiver transceiver
比較対象 MAX232CASE+ →

MAX232CSE+

✅ ドロップイン
Analog Devices
📦 16-pin SOIC
Dual RS-232 Transceiver · EIA/TIA-232E, V.28, V.24 · 4.5 V to 5.5 V · 2 · 2 · 2/2 Full RS-232 · 16-SOIC narrow · 16 pins

価格はお問い合わせください

データシートを見る →

MAX232CASE+T

✅ ドロップイン
📦 16-pin SOIC
Same 2/2, 5 V, 120 kbps interface and 16-pin SOIC footprint; the +T grade expands operating temperature from 0°C to 70°C to -40°C to 125°C.

📋 参考代替品(カタログ未掲載)

MAX232ACSE+T

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 16-pin SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

価格はお問い合わせください

データシートを見る →

MAX232ESE+

✅ ドロップイン ⚠️ 仕様未検証
Maxim Integrated
📦 16-pin SOIC
Dual RS-232 line driver and receiver transceiver · 2 channels · 2 channels · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 · V.24

価格はお問い合わせください

データシートを見る →

MAX232EWE+

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 16-pin SOIC
Dual RS-232 transceiver · RS-232 · 4.5 V to 5.5 V · 5 V · 2 channels · 2 channels · 120 kbps · CMOS

価格はお問い合わせください

データシートを見る →

MAX232CASE+ 仕様

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Duplex Type Full duplex
Interface Standard EIA/TIA-232E, V.28, and V.24
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
Maximum Data Rate 120 kbps
Receiver Hysteresis 500 mV
RS-232 Output Level Approximately -9 V to +9 V
ESD Protection ±2 kV
動作温度 0°C to 70°C
パッケージ 16-pin SOIC
実装タイプ Surface mount
Part Status Obsolete
RoHS ステータス Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

MAX232CASE+ ピン構成

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
ピン 1 R1OUT — Receiver 1 output
ピン 2 R2OUT — Receiver 2 output
ピン 3 R2IN — Receiver 2 input
ピン 4 R1IN — Receiver 1 input
ピン 5 V- — Negative charge-pump output
ピン 6 VCC — Positive supply connection
ピン 7 T1IN — Driver 1 logic input
ピン 8 T2IN — Driver 2 logic input
ピン 9 T1OUT — Driver 1 RS-232 output
ピン 10 T2OUT — Driver 2 RS-232 output
ピン 11 GND — Ground
ピン 12 C1+ — Charge-pump flyback capacitor 1 positive terminal
ピン 13 C1- — Charge-pump flyback capacitor 1 negative terminal
ピン 14 C2+ — Charge-pump flyback capacitor 2 positive terminal
ピン 15 C2- — Charge-pump flyback capacitor 2 negative terminal
ピン 16 VCC — Positive supply connection

主な用途

MAX232CASE+ の用途: 6 件s: Industrial Control Panels, Point-of-Sale Equipment, Test and Measurement Systems, Embedded Serial Service Ports, Security and Access Systems, Instrumentation and Diagnostics.

🏭

Industrial Control Panels

The MAX232CASE+ fits legacy industrial control panels that require a 5 V logic-side controller to communicate with RS-232 equipment over a full-duplex serial link. Its two transmitters and two receivers support two communication channels, while the 120 kbps maximum rate is sufficient for configuration commands, status polling, and supervisory data. The specified 0°C to 70°C range suits controlled indoor equipment; use the -40°C to 125°C MAX232CASE+T when the enclosure experiences wider temperature variation. Preserve the external charge-pump capacitor arrangement and keep the circuit close to the connector and controller to reduce susceptibility to ESD and ground potential differences.

🖥️

Point-of-Sale Equipment

The MAX232CASE+ is suitable for point-of-sale terminals and peripherals that retain a DB9-based RS-232 service or data port. A microcontroller can communicate through the logic-level receiver outputs while the transmitters create RS-232 levels for attached scanners, printers, or weighing equipment. The device's 2/2 channel arrangement can handle two independently connected serial paths, and its full-duplex operation supports simultaneous transmission and reception. Designers should use a 4.5 V to 5.5 V supply, select capacitors with suitable voltage rating and temperature characteristics, and include the ±2 kV ESD protection capability in the external port-protection strategy when cables leave the enclosure.

🔧

Test and Measurement Systems

The MAX232CASE+ can bridge a laboratory instrument or automated test fixture to a computer or embedded controller through an RS-232 command interface. Its 120 kbps data rate accommodates configuration files, measurement results, and status commands, while 500 mV receiver hysteresis improves noise rejection in bench environments. The 16-pin SOIC package also allows reuse of an existing small-footprint board layout. Keep the interface ground referenced to the system ground, verify the transmitter's approximately ±9 V output behavior under load, and use the manufacturer's charge-pump capacitor values to preserve stable operation and minimize conducted noise on the logic-side rails.

🧩

Embedded Serial Service Ports

The MAX232CASE+ is useful in embedded equipment that retains a service connector for configuration, firmware download, or diagnostic commands. Its dual transmit and receive channels allow two serial links to be implemented without adding another transceiver, and the 120 kbps rate is well matched to human-paced console traffic. Because the catalog part is obsolete, an existing design can use a qualified family alternative when the footprint and pin functions match. A new embedded platform should prioritize an active low-power transceiver, but any migration must verify the charge-pump capacitor pinout, supply current, receiver thresholds, and whether shutdown or supply-sensing functions are required.

🔒

Security and Access Systems

The MAX232CASE+ can support RS-232 connections in access-control readers, alarm panels, and security-system service tools where a controller or service laptop uses a legacy serial protocol. Its full-duplex 2/2 arrangement permits simultaneous command transmission and sensor or status reception, and the 500 mV receiver hysteresis helps avoid interpreting small noise disturbances as valid commands. For installations exposed to electrostatic discharge or long cables, retain the MAX232 family's ±2 kV ESD capability and place the transceiver near the connector. Keep external protection and chassis grounding separate from logic ground where required by the system architecture.

📡

Instrumentation and Diagnostics

The MAX232CASE+ suits diagnostic equipment that transfers measurement logs, calibration records, or service information over RS-232. The 120 kbps limit is sufficient for many text-based protocols and low-bandwidth binary records, while two transmitters and two receivers allow connection to more than one device or permit one channel to be reserved for diagnostics. The interface should be powered from a stable 5 V rail because charge-pump operation depends on adequate supply headroom. Use short, properly terminated cabling where possible, observe common-mode limits, and verify the external capacitor values and polarity against the manufacturer datasheet before reusing the circuit in new instrumentation.

Where can I buy MAX232CASE+?
The MAX232CASE+ can be requested through the Request a Quote form on this page. Because the catalog listing identifies the device as obsolete, buyers should request current availability, lot traceability, and lifecycle confirmation before placing a production order. A request should also state the required quantity, package form, operating-temperature requirement, and whether the order is for maintenance of an existing PCB or qualification of a replacement.
What is the current price of MAX232CASE+?
Use the Request a Quote form on this page for the current commercial response for MAX232CASE+. The listed ordering code is obsolete, so a static price would not reflect the availability of an exact, traceable unit. Include the quantity and date-code requirements in the request to help determine whether an original catalog unit can be sourced or whether an electrically qualified substitute should be evaluated.
What is the lead time for MAX232CASE+?
Request the current lead time through the Request a Quote form on this page, including the required quantity and acceptable date-code policy. Since the MAX232CASE+ catalog designation is obsolete, lead time depends on remaining factory inventory, authorized-channel availability, and whether the shipment is an original part. Do not release a production schedule until the supplier confirms exact MPN, lot traceability, and any substitute proposal in writing.
Is MAX232CASE+ in stock?
Stock status must be confirmed through the Request a Quote form on this page. The product listing identifies MAX232CASE+ as obsolete, so open market inventory may vary by lot and package form. Ask the supplier to identify the manufacturer, date code, inspection status, and storage conditions when quoting an original unit. For new production, request an active lifecycle alternative with a verified 16-pin SOIC footprint.
What are the key specifications of MAX232CASE+ that engineers should know?
The MAX232CASE+ is a 5 V, dual-channel RS-232 transceiver with two transmitters, two receivers, full-duplex operation, and a maximum data rate of 120 kbps. It operates from 4.5 V to 5.5 V in a 16-pin SOIC package. The receiver has 500 mV hysteresis, the specified commercial-temperature range is 0°C to 70°C, and MAX232-family devices provide approximately ±9 V outputs with ±2 kV ESD protection.
What is the difference between MAX232CASE+ and MAX232CSE+?
MAX232CASE+ and MAX232CSE+ are closely related 16-pin SOIC RS-232 transceivers from the same manufacturer, but their order suffixes distinguish their packaging and catalog treatment. MAX232CASE+ is listed as obsolete, while MAX232CSE+ appears in active distributor listings for the same basic 2/2, 5 V, 120 kbps interface. Both use the same SOIC-16 footprint, although the exact suffix, temperature grade, and lifecycle status must be checked before interchangeability is approved.
What is the difference between MAX232CASE+ and MAX232CASE+T?
MAX232CASE+ is specified for 0°C to 70°C operation, while the MAX232CASE+T version is specified to operate from -40°C to 125°C. Both are 2/2, 120 kbps, 5 V RS-232 transceivers in a 16-pin SOIC package, so their electrical interface and land pattern are closely aligned. The wider temperature specification of MAX232CASE+T makes it the appropriate choice when the replacement will operate across an extended industrial temperature range.
When should I choose MAX232CASE+ over MAX3232CSE+?
Choose MAX232CASE+ only when an existing board specifically requires its MAX232-compatible 2/2 RS-232 behavior and the exact obsolete catalog part is legitimately available. For a new 5 V design, MAX3232CSE+ is generally the more practical choice because the MAX3232 family is designed for modern low-power portable equipment. The MAX232 family offers ±9 V output levels, while MAX3232 output swing depends on its charge-pump implementation and load.
When should I choose MAX232CASE+ over MAX232ACSE+?
Choose MAX232CASE+ when maintaining an existing MAX232 board that requires the established 120 kbps RS-232 interface and exact pin arrangement. For a new design with lower power requirements, review MAX232ACSE+ because the MAX232A family adds shutdown-related functionality and is intended for power-conscious RS-232 designs. The replacement decision must compare supply current, shutdown behavior, output levels, and capacitor requirements rather than package compatibility alone.
What can replace MAX232CASE+?
The closest same-family replacements are MAX232CSE+, MAX232CASE+T, MAX232ACSE+, MAX232ESE+, and MAX232EWE+, subject to electrical and lifecycle review. Each uses a 16-pin SOIC footprint and provides the same fundamental 2/2, 5 V RS-232 transceiver function. Verify the exact temperature grade, supply current, shutdown pins, charge-pump capacitor values, output levels, and data rate before approving any substitution for production.
Is MAX232CASE+ the same as MAX232CSE+?
MAX232CASE+ and MAX232CSE+ perform the same core 2/2 RS-232 transceiver function at 5 V and use a 16-pin SOIC footprint, but they are distinct ordering codes. Their lifecycle treatment and package suffix can differ, and the exact operating-temperature grade must also be confirmed. Use MAX232CSE+ as a candidate for an existing footprint, then compare the manufacturer pin description, capacitor network, electrical limits, and qualification requirements.
Where can I download the MAX232CASE+ datasheet PDF?
The manufacturer datasheet for the MAX220-MAX249 family can be downloaded from the Analog Devices product-documentation link listed on this page. Use the manufacturer document to verify the SOIC-16 pin assignments, charge-pump capacitor connections, receiver thresholds, timing limits, and absolute maximum ratings. The manufacturer product page also provides current documentation and product-selection information for the broader MAX232 family.
Where can I find the MAX232CASE+ pinout?
Use the MAX220-MAX249 manufacturer datasheet for the authoritative MAX232CASE+ pin description and SOIC-16 numbering. The device uses logic-side driver inputs, RS-232-side driver outputs, receiver inputs and outputs, supply pins, ground, and four external charge-pump capacitor terminals. Assign PCB tracks from that pin-description table rather than from an unverified substitute schematic, especially when converting an obsolete MAX232CASE+ design to a related family member.
Can MAX232CASE+ be used for industrial RS-232 communication?
The MAX232CASE+ can be used for RS-232 communication when the enclosure remains within its specified 0°C to 70°C range and the supply and signal conditions comply with the absolute maximum ratings. For wider industrial environments, MAX232CASE+T offers a stated -40°C to 125°C range and is the more defensible same-family choice. Environmental qualification, isolation, surge exposure, and cable length must be considered in addition to the transceiver temperature rating.
What is the best cross-brand equivalent for MAX232CASE+?
No cross-brand drop-in equivalent can be confirmed from the available manufacturer and distributor information without an explicit pin-compatible cross-reference. Cross-brand RS-232 transceivers often differ in charge-pump capacitor values, shutdown implementation, input thresholds, and lead assignments even when they use a 16-pin SOIC. Use the manufacturer datasheet and package drawings to approve a cross-brand candidate, or request an active same-family replacement through the Request a Quote form.

エンジニアリング参考データ: MAX232CASE+ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MAX232CASE+ only when maintaining an existing board that specifically depends on its established 2/2, 5 V, 120 kbps RS-232 behavior and an original obsolete unit can be properly sourced and qualified. For ordinary maintenance, MAX232CSE+ is the preferred same-footprint starting point because it retains the core interface while appearing in current distributor catalogs. Select MAX232CASE+T when the system requires operation from -40°C to 125°C, and consider MAX232ACSE+T for a new low-power design that can use shutdown functionality and the corresponding charge-pump configuration. The E-grade alternatives may suit wider-temperature requirements, but their exact operating ranges and lifecycle should be confirmed. No cross-brand candidate is recommended without a complete pin, capacitor, timing, and absolute-maximum-rating review.

代替品との比較

パラメータ この製品 MAX232CSE+ MAX232CASE+T MAX232ACSE+T MAX232ESE+ MAX232EWE+
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Transceiver Configuration 2 transmitters and 2 receivers 2 transmitters and 2 receivers 2 transmitters and 2 receivers 2 transmitters and 2 receivers 2 transmitters and 2 receivers 2 transmitters and 2 receivers
Maximum Data Rate 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps
Supply Voltage 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Operating Temperature 0°C to 70°C Commercial-temperature grade; exact range not stated for this suffix -40°C to 125°C -40°C to 125°C Extended-temperature grade; exact range not stated for this suffix Extended-temperature grade; exact range not stated for this suffix
Lifecycle Status Obsolete Active distributor catalog option Listed with active inventory and pricing Listed for comparison Family option; exact current status not stated Family option; exact current status not stated
Power and Shutdown Features MAX232 5 V transceiver; shutdown function not stated MAX232 5 V transceiver; shutdown function not stated MAX232 5 V transceiver; shutdown function not stated MAX232A low-power family with shutdown functionality MAX232 E-grade family; exact shutdown configuration not stated MAX232 E-grade family; exact shutdown configuration not stated
RS-232 Output Levels Approximately ±9 V Approximately ±9 V Approximately ±9 V MAX232A family RS-232 output; confirm under load MAX232 family output; confirm under load MAX232 family output; confirm under load

主な差別化要因

  • Maintains the established MAX232 2/2 RS-232 interface (vs MAX3232CSE+)
  • Exact commercial-temperature original catalog reference (vs MAX232CASE+T)
  • Active-catalog same-footprint maintenance candidate (vs MAX232CSE+)
  • Lower-power option available without changing the basic interface family (vs MAX232ACSE+T)

設計ノート

Place the four charge-pump capacitors directly between their numbered IC pins and keep their ground-side return paths short and compact. Use the capacitor values, type, voltage rating, and temperature coefficient specified by the manufacturer for the selected family member. Extra-long capacitor traces can increase loop inductance and allow charge-pump ripple to couple into nearby logic. Preserve the SOIC-16 land pattern, but recheck pin functions when replacing the obsolete MAX232CASE+ with a MAX232A or other shutdown-capable variant.

Do not approve a replacement based only on its SOIC-16 footprint. Compare the supply range, 2/2 channel allocation, receiver thresholds, data rate, transmitter levels, shutdown behavior, charge-pump capacitor values, and temperature grade. A MAX232CASE+ board can normally be inspected for shared supply, ground, driver, receiver, and capacitor pins, but an MAX232A-family substitute may use shutdown-related pins differently. Confirm every connection against the manufacturer pin-description table and schematic before production release.

Route the RS-232 connector-side traces away from clocks, switching-node connections, and sensitive analog inputs. Provide a direct return path for the interface ground, and consider the ground-potential difference that can develop between connected equipment. The receiver's 500 mV hysteresis helps reject noise, but it does not replace proper shielding, cable routing, or connector-side ESD protection. Keep the transceiver close to the connector where practical to minimize exposed high-impedance receiver traces.

Decouple the 5 V supply locally and verify that its operating range remains within 4.5 V to 5.5 V under load. The MAX232 family's internal charge pump creates the bipolar voltages required for RS-232 transmission, so insufficient supply headroom or excessive source impedance can affect output behavior. Place the manufacturer's recommended bypass capacitor near the supply pins and evaluate the external capacitors for adequate voltage rating. Do not substitute lower capacitance values solely to reduce board area.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer family is identified as intended for EIA/TIA-232E and V.28/V.24 interfaces. Specific material-compliance declarations for the obsolete MAX232CASE+ ordering code were not identified.

データ検証日: 2026-11-17 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX232CASE+ datasheet MAX232CASE+ datasheet pdf MAX232CASE+ pinout MAX232CASE+ equivalent MAX232CASE+ replacement MAX232CASE+ cross reference MAX232CASE+ price MAX232CASE+ stock MAX232CASE+ vs MAX232CSE+ MAX232CASE+ vs MAX232CASE+T Maxim Integrated MAX232CASE+ MAX232CASE+ SOIC-16 application circuit

関連部品&用語

Maxim Integrated MAX232CASE+ MAX232CSE+ MAX232CASE+T MAX232ACSE+T MAX232ESE+ MAX232EWE+ RS-232 transceiver line driver line receiver interface IC full duplex charge pump EIA/TIA-232E V.28 V.24 120 kbps 500 mV receiver hysteresis 4.5 V to 5.5 V supply 16-pin SOIC SOIC package family surface mount RS-232 communications ESD protection
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示