Analog Devices

MAX3232EEUP+G071 - 3-5.5V 250kbps RS-232 Transceiver | Analog Devices

部品番号: MAX3232EEUP+G071 ✓ 生産中
3 V to 5.5 V Vdss 10 nA Id 20-pin TSSOP Package
MOQ: 1 |

MAX3232EEUP+G071 概要

The Analog Devices MAX3232EEUP+G071 is a dual-transmitter, dual-receiver RS-232 interface transceiver with a 3 V to 5.5 V supply range, data rates up to 250 kbps, and a 20-pin TSSOP package. It adds integrated charge-pump voltage conversion for reliable RS-232 signal generation while operating from a modern low-voltage digital supply.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts incoming RS-232 signals back into logic levels. The MAX3232E belongs to the broader interface transceiver hierarchy, combining line-driver and line-receiver functions in one package. This makes it suitable for equipment that must communicate with legacy serial ports, industrial controllers, barcode equipment, and computer peripherals.

The MAX3232EEUP+G071 provides two transmitters and two receivers in a 20-pin TSSOP package. Its 3 V to 5.5 V operating range permits use with 3.3 V and 5 V systems, while the 250 kbps data rate covers standard asynchronous RS-232 links. The MAX3232E family also includes enhanced ESD protection, with a 15 kV rating identified for the family, helping reduce damage from electrostatic discharge encountered during handling or connection to external cables.

The device uses on-chip charge-pump circuitry to generate the positive and negative voltage levels required by RS-232. This eliminates the need for a separate bipolar power supply in many designs. The transmitters invert the outgoing logic, and the receivers convert the bipolar RS-232 input into a compatible CMOS/TTL signal. MAX3232E-family devices are designed to remain interoperable with other RS-232 implementations when the same supply, data-rate, and connector standards are observed.

Typical uses include industrial serial controllers, point-of-sale equipment, test fixtures, instrumentation, data acquisition units, and embedded systems that retain an RS-232 port. The 20-pin TSSOP package is also convenient for compact industrial control boards where a through-hole SOIC footprint is undesirable. Its interface function is especially useful when an existing system uses a 3.3 V processor but must retain an RS-232 connection to older peripheral equipment.

PCB layout should keep the charge-pump and interface capacitors close to their associated pins, and external protection or filtering should be considered for long or exposed cables. The RS-232 ground and signal conductors should be routed as an interface pair, while high-current digital and switching power paths should remain separated to reduce ground disturbance. Confirm the complete pin assignments and recommended capacitor values in the manufacturer datasheet before releasing the PCB.

This page combines the key MAX3232EEUP+G071 specifications, drop-in interface alternatives, package-level comparisons, and practical RS-232 layout guidance. It is intended to help engineers identify whether the part fits an existing 20-pin TSSOP design before sourcing, schematic capture, and prototype assembly.

ドロップイン代替品: MAX3232EEUP+G071 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX3232EEUP+G071 (同一形状・フットプリント) — 相違点: Maximum Data Rate, Supply Voltage Range.

Analog Devices
Maximum Data Rate: 1Mbps
Supply Voltage Range: 3.0V to 5.5V
比較対象 MAX3232EEUP+G071 →

MAX3232EEUE+

✅ ドロップイン
📦 20-TSSOP
Same MAX3232E RS-232 architecture and 250 kbps class; verify ordering suffix, temperature grade, and lead arrangement before substitution

📋 参考代替品(カタログ未掲載)

MAX3232ECUP+G071

✅ ドロップイン
Analog Devices
📦 20-TSSOP
2/2 RS-232 transceiver · 2 drivers and 2 receivers · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA · True RS-232 · 20-pin TSSOP

価格はお問い合わせください

データシートを見る →

MAX3222EEUP+T

✅ ドロップイン
📦 20-TSSOP
Pin-, package-, and functionally compatible MAX3222E family member, but receiver shutdown behavior differs from MAX3232E

📋 参考代替品(カタログ未掲載)

MAX3222ECAP

✅ ドロップイン
📦 20-TSSOP
Pin-, package-, and functionally compatible MAX3222E alternative with a different ordering suffix and shutdown behavior

📋 参考代替品(カタログ未掲載)

MAX3232EEUP+

✅ ドロップイン
Analog Devices
📦 20-TSSOP
RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · 1Mbps · ±15kV · Down to 10nA · True RS-232

価格はお問い合わせください

データシートを見る →

MAX3232EEUP+G071 仕様

Transmitter Count 2
Receiver Count 2
インターフェースタイプ RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Enhanced ESD Protection 15 kV
パッケージ 20-pin TSSOP
Package Width 4.40 mm
Package Length 0.173 in
実装スタイル Surface mount
Number of Drivers 2
Number of Receivers 2
Shutdown Supply Current 10 nA

MAX3232EEUP+G071 0.173 in ピン配置ガイド

MAX3232EEUP+G071 (0.173 in パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX3232EEUP+G071 の 0.173 in パッケージピン配置図

詳細なピン配置データはありません: MAX3232EEUP+G071.

詳細は データシート をご参照ください。

主な用途

MAX3232EEUP+G071 の用途: 6 件s: Industrial Serial Controller, Point-of-Sale Terminal, Test and Measurement Instrument, Embedded Data Acquisition Unit, Barcode and Label Equipment, Service and Diagnostics Interface.

🏭

Industrial Serial Controller

The MAX3232EEUP+G071 fits an industrial controller that must retain a legacy RS-232 port while running its digital logic from a 3.3 V or 5 V rail. Its two transmitters and two receivers support full-duplex communication with two connected devices, while the 250 kbps rate is appropriate for supervisory, configuration, and service protocols. The integrated charge-pump circuitry generates the bipolar RS-232 levels without requiring a separate negative power supply, simplifying the power architecture and reducing board area.

🖥️

Point-of-Sale Terminal

A point-of-sale terminal can use the MAX3232EEUP+G071 to connect a low-voltage controller to an RS-232 receipt printer, scanner, or customer-display interface. The 3 V to 5.5 V operating range fits common embedded processors, and the dual-driver, dual-receiver arrangement supports more than one peripheral when the system uses separate transmit and receive lines. Its 250 kbps maximum data rate is well matched to the short-distance, low-speed serial traffic commonly used by retail peripherals.

🔧

Test and Measurement Instrument

The MAX3232EEUP+G071 is appropriate for test and measurement instruments that need a PC-facing RS-232 command port. Two receivers allow the instrument to monitor or receive on two channels, while two transmitters support outbound commands and status messages. Its 250 kbps rate and integrated level translation simplify communication with legacy test equipment, and the surface-mount 20-pin TSSOP package suits compact benchtop or rack-mount controller boards.

📡

Embedded Data Acquisition Unit

A compact data-acquisition unit can place the MAX3232EEUP+G071 between its control logic and an external RS-232 instrument. The device translates CMOS/TTL logic to and from bipolar RS-232 while operating from the same 3 V or 5 V rail used by many embedded processors. This avoids a separate negative-voltage supply and allows both channels to be used for commands and measurement data. The 250 kbps limit should be checked against the selected protocol and cable environment.

📺

Barcode and Label Equipment

Barcode scanners, label printers, and handheld service tools frequently expose RS-232 ports for configuration or diagnostic communication. The MAX3232EEUP+G071 provides two RS-232 transmitters and receivers from a 3 V to 5.5 V supply, allowing a modern controller board to replace a legacy PC serial port without adding a bipolar power rail. Its 20-pin TSSOP package supports compact designs, while the family-level 15 kV ESD protection helps improve robustness at connector entry points.

🛠️

Service and Diagnostics Interface

The MAX3232EEUP+G071 can provide a dedicated service port on industrial or commercial equipment without exposing internal logic voltages. One RS-232 channel can carry technician commands while another provides diagnostic or status information, depending on the system protocol. Operating from 3 V to 5.5 V simplifies integration with the equipment controller, and the 250 kbps interface rate supports common configuration links. Add suitable connector-level protection when the port will be exposed to long or frequently disconnected cables.

おすすめ製品の概要

MAX3232EEUP+ Analog Devices 使用用途: Industrial Serial Controller, Test and Measurement Instrument, Service and Diagnostics Interface MAX3222EEUP+T Compatible MAX3222E family option with different shutdown behavior 使用用途: Industrial Serial Controller, Embedded Data Acquisition Unit MAX3232EEUE+ Same-family 20-pin TSSOP RS-232 transceiver alternative 使用用途: Point-of-Sale Terminal, Barcode and Label Equipment MAX3232ECUP+G071 Analog Devices 使用用途: Point-of-Sale Terminal, Embedded Data Acquisition Unit MAX3222ECAP Compatible MAX3222E family alternative for shutdown-sensitive designs 使用用途: Test and Measurement Instrument, Barcode and Label Equipment MAX3232EEUP+G071 Analog Devices 使用用途: Service and Diagnostics Interface
What is the MAX3232EEUP+G071?
The MAX3232EEUP+G071 is a dual-transmitter, dual-receiver RS-232 transceiver in a 20-pin TSSOP package. According to the manufacturer datasheet, it supports a 3 V to 5.5 V supply and a maximum data rate of 250 kbps. It is designed for systems that need to bridge modern CMOS/TTL logic to a bipolar RS-232 port without requiring a separate external bipolar supply.
What are the key specifications of MAX3232EEUP+G071 that engineers should know?
The principal MAX3232EEUP+G071 specifications are two transmitters, two receivers, a 3 V to 5.5 V supply range, a 250 kbps maximum data rate, and a 20-pin TSSOP package. The MAX3232E family also provides 15 kV enhanced ESD protection. These parameters define its suitability for dual-port RS-232 links in compact, low-voltage industrial and embedded equipment.
What is the operating voltage of MAX3232EEUP+G071?
The MAX3232EEUP+G071 operates from 3 V to 5.5 V, as stated by the manufacturer datasheet and the product listing for this exact MPN. This range supports both 3.3 V and 5 V logic systems. The supply pins must remain within the published limits, and the interface should be designed with the capacitance and protection recommendations from the datasheet.
Where can I download the MAX3232EEUP+G071 datasheet PDF?
The MAX3232EEUP+G071 datasheet PDF is available through the manufacturer-document link listed on this page. It describes the MAX3222E and MAX3232E families, including their transmitters, receivers, charge-pump operation, shutdown behavior, electrical characteristics, and package information. Use the PDF pin table and recommended application circuit when assigning connections and selecting external capacitors.
Where can I find the MAX3232EEUP+G071 pinout?
The MAX3232EEUP+G071 pinout is published in the manufacturer datasheet, whose PDF link appears on this page. The device is supplied in a 20-pin TSSOP package, but the package drawing alone does not establish each electrical function. Use the datasheet pin-description table to assign supply, ground, driver, receiver, charge-pump, and capacitor connections before laying out the PCB.
How fast is the MAX3232EEUP+G071 RS-232 transceiver?
The MAX3232EEUP+G071 supports data rates up to 250 kbps for the exact ordering code identified on this page. This is suitable for conventional asynchronous RS-232 equipment rather than high-speed differential buses. Cable length, capacitance, grounding, and the data format supported by the connected equipment remain important constraints on achievable communication reliability.
Where can I buy MAX3232EEUP+G071 online?
Use the Request a Quote form on this page to request MAX3232EEUP+G071 availability, current lead time, and an order quote. The form is the appropriate route for checking the exact ordering code and required quantity. Its package code identifies a 20-pin TSSOP device, so confirm that the requested suffix matches the footprint and temperature requirements of your assembly.
What is the price of MAX3232EEUP+G071?
The current price of MAX3232EEUP+G071 is handled through the Request a Quote form on this page. The form allows quantity, target package, and delivery requirements to be included in the request. This avoids presenting a stale price for a specific ordering code and also lets procurement confirm any minimum-order quantity or production-volume conditions.
What is the lead time for MAX3232EEUP+G071?
The current lead time for MAX3232EEUP+G071 should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, date code, stock position, and the exact suffix requested. Provide the production forecast and packaging requirements so the quotation can reflect the actual manufacturing plan rather than a generic single-unit availability estimate.
Is MAX3232EEUP+G071 in stock?
Current stock for MAX3232EEUP+G071 is confirmed through the Request a Quote form on this page. Submit the required quantity, shipping destination, and target date to obtain a current availability response. Because lifecycle and inventory can change, confirm the orderable suffix and delivery schedule as part of the quotation rather than relying on a previously indexed stock count.
What is the best drop-in replacement for MAX3232EEUP+G071?
The closest drop-in choices identified for the MAX3232EEUP+G071 include the MAX3232EEUE+ and MAX3232ECUP+G071 in the same 20-pin TSSOP format, with the MAX3222E family providing another compatible interface route. According to the manufacturer family documentation, MAX3222E and MAX3232E are pin-, package-, and functionally compatible. Verify temperature grade, supply limits, shutdown behavior, and data rate before substitution.
Can MAX3232EEUP+T replace MAX3232EEUP+G071?
The MAX3232EEUP+T should not be treated as an unconditional drop-in replacement for the MAX3232EEUP+G071 because the suffix identifies a different ordering or packaging condition. According to the manufacturer ordering information, package and temperature details must match the assembly requirement. Verify the exact suffix, grade, lead arrangement, and tape-and-reel orientation rather than relying on the shared device family name.
What can replace MAX3232EEUP+G071 in an RS-232 design?
Several MAX3232E-family ordering codes can replace the MAX3232EEUP+G071 when they use the identical 20-pin TSSOP footprint and meet the required electrical limits. The MAX3232EEUE+ and MAX3232ECUP+G071 are direct candidates, while MAX3222EEUP+T and MAX3222ECAP are family alternatives documented as pin-, package-, and functionally compatible. Confirm each candidate's data rate, supply range, temperature grade, and shutdown characteristics.
MAX3232EEUP+G071 vs MAX3222EEUP+T - which is better for an RS-232 controller?
The MAX3232EEUP+G071 is preferable when the design requires the 250 kbps MAX3232E specification and a 3 V to 5.5 V supply. The MAX3222EEUP+T belongs to the related MAX3222E family, whose receiver shutdown behavior differs from that of the MAX3232E. The manufacturer family documentation states that the devices are pin-, package-, and functionally compatible, but shutdown requirements should determine the final choice.
When should I choose MAX3232EEUP+G071 over MAX3222EEUP+T?
Choose the MAX3232EEUP+G071 when the existing board and interface requirements specifically target the MAX3232E family, including its 250 kbps rating and 3 V to 5.5 V operating range. The MAX3222EEUP+T is appropriate when its documented operating behavior, particularly its shutdown and monitoring characteristics, better matches the system. Both approaches require a 20-pin TSSOP footprint and final qualification against the complete datasheet.
Is MAX3232EEUP+G071 suitable for industrial equipment?
The MAX3232EEUP+G071 is suitable for industrial RS-232 equipment when its 3 V to 5.5 V supply, 250 kbps data rate, 20-pin TSSOP package, and family-level 15 kV ESD protection satisfy the system requirements. Industrial suitability also depends on the required operating-temperature grade, isolation strategy, cable protection, and enclosure. Confirm the exact suffix and environmental requirements before production release.

エンジニアリング参考データ: MAX3232EEUP+G071 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MAX3232EEUP+G071 for a new or existing design that specifically requires the MAX3232E 2/2 RS-232 interface, a 3 V to 5.5 V supply, and a 20-pin TSSOP footprint. The MAX3232EEUE+ is a practical same-family candidate when its exact grade and suffix satisfy the assembly requirements. Consider the MAX3232ECUP+G071 when the alternate C-grade ordering code is approved for the design. The MAX3222EEUP+T and MAX3222ECAP are most appropriate when their shutdown behavior is desirable, particularly because the MAX3222E receivers remain active during shutdown. None of these alternatives should be released without checking the manufacturer pin table, electrical limits, temperature range, and exact ordering suffix.

代替品との比較

パラメータ この製品 MAX3232EEUE+ MAX3232ECUP+G071 MAX3222EEUP+T MAX3222ECAP MAX3232EEUP+
Package 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Transmitter Count 2 2 2 2 2 2
Receiver Count 2 2 2 2 2 2
Mounting Style Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

主な差別化要因

  • Exact G071 ordering option within the MAX3232E family (vs MAX3232EEUP+)
  • Higher listed data-rate capability for the base ordering code (vs MAX3232EEUP+)
  • Lower documented shutdown supply current than MAX3222E alternatives (vs MAX3222EEUP+T)

設計ノート

Place the required charge-pump capacitors and interface capacitors directly beside their associated MAX3232EEUP+G071 pins, with short ground returns and no intervening test pads unless their effect has been evaluated. Keep the external RS-232 connector and protection components near the board edge. Where possible, route driver and receiver traces away from switching-regulator inductors and high-current return paths to reduce noise coupling.

Maintain a clear separation between the RS-232 connector side of the board and sensitive digital or analog circuitry. Connect the interface ground reference to the equipment ground in accordance with the system grounding strategy, and use a continuous ground reference beneath the interface area when practical. Long external cables can carry electrostatic discharge and common-mode noise, so validate connector protection independently of the IC's internal ESD characteristics.

Do not substitute a related MAX3222E or MAX3232E ordering code solely because the package is also called 20-pin TSSOP. The MAX3222E family is documented as pin-, package-, and functionally compatible with MAX3232E, but its receivers remain active in shutdown mode. Also verify the temperature grade, operating supply, data rate, and suffix-specific ordering requirements before approving a replacement.

The MAX3232EEUP+G071 operates from 3 V to 5.5 V, allowing use with common 3.3 V and 5 V rails. Nevertheless, follow the datasheet's recommended capacitor types, values, and placement because charge-pump operation and interface stability depend on correct local decoupling. Confirm supply sequencing and ensure logic-domain signals remain within the transmitter and receiver input limits when the connector is active.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer datasheet describes the MAX3222E/MAX3232E family. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for this ordering code were not established from the listed product information.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX3232EEUP+G071 datasheet MAX3232EEUP+G071 pinout MAX3232EEUP+G071 datasheet pdf MAX3232EEUP+G071 equivalent MAX3232EEUP+G071 replacement MAX3232EEUP+G071 cross reference MAX3232EEUP+G071 vs MAX3222EEUP+T MAX3232EEUP+G071 footprint MAX3232EEUP+G071 application circuit MAX3232EEUP+G071 price MAX3232EEUP+G071 stock Analog Devices MAX3232EEUP+G071 MAX3232EEUP 20-TSSOP pinout MAX3232EEUP+G071 3-5.5V 250kbps

関連部品&用語

Analog Devices MAX3232EEUP+G071 MAX3232EEUE+ MAX3232ECUP+G071 MAX3232EEUP+ MAX3222EEUP+T MAX3222ECAP RS-232 transceiver dual-transceiver interface IC interface transceiver line driver line receiver RS-232 CMOS logic TTL logic charge-pump voltage converter 3 V to 5.5 V power supply 250 kbps data rate 15 kV ESD protection 20-TSSOP package TSSOP package family surface-mount package industrial serial communication point-of-sale equipment data acquisition
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示