MAX3232EEUP+G071 - 3-5.5V 250kbps RS-232 Transceiver | Analog Devices
MPN: MAX3232EEUP+G071 ✓ AktifMAX3232EEUP+G071 Genel Bakış
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts incoming RS-232 signals back into logic levels. The MAX3232E belongs to the broader interface transceiver hierarchy, combining line-driver and line-receiver functions in one package. This makes it suitable for equipment that must communicate with legacy serial ports, industrial controllers, barcode equipment, and computer peripherals.
The MAX3232EEUP+G071 provides two transmitters and two receivers in a 20-pin TSSOP package. Its 3 V to 5.5 V operating range permits use with 3.3 V and 5 V systems, while the 250 kbps data rate covers standard asynchronous RS-232 links. The MAX3232E family also includes enhanced ESD protection, with a 15 kV rating identified for the family, helping reduce damage from electrostatic discharge encountered during handling or connection to external cables.
The device uses on-chip charge-pump circuitry to generate the positive and negative voltage levels required by RS-232. This eliminates the need for a separate bipolar power supply in many designs. The transmitters invert the outgoing logic, and the receivers convert the bipolar RS-232 input into a compatible CMOS/TTL signal. MAX3232E-family devices are designed to remain interoperable with other RS-232 implementations when the same supply, data-rate, and connector standards are observed.
Typical uses include industrial serial controllers, point-of-sale equipment, test fixtures, instrumentation, data acquisition units, and embedded systems that retain an RS-232 port. The 20-pin TSSOP package is also convenient for compact industrial control boards where a through-hole SOIC footprint is undesirable. Its interface function is especially useful when an existing system uses a 3.3 V processor but must retain an RS-232 connection to older peripheral equipment.
PCB layout should keep the charge-pump and interface capacitors close to their associated pins, and external protection or filtering should be considered for long or exposed cables. The RS-232 ground and signal conductors should be routed as an interface pair, while high-current digital and switching power paths should remain separated to reduce ground disturbance. Confirm the complete pin assignments and recommended capacitor values in the manufacturer datasheet before releasing the PCB.
This page combines the key MAX3232EEUP+G071 specifications, drop-in interface alternatives, package-level comparisons, and practical RS-232 layout guidance. It is intended to help engineers identify whether the part fits an existing 20-pin TSSOP design before sourcing, schematic capture, and prototype assembly.
Drop-in alternatifler için MAX3232EEUP+G071 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MAX3232EEUP+G071 (aynı form faktörü ve ayağa oturma) — farklı olan Maximum Data Rate, Supply Voltage Range.
MAX3232EEUE+
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX3232ECUP+G071
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX3222EEUP+T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX3222ECAP
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX3232EEUP+
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX3232EEUP+G071 Özellikler
| Transmitter Count | 2 |
| Receiver Count | 2 |
| Arayüz Türü | RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Enhanced ESD Protection | 15 kV |
| Paket | 20-pin TSSOP |
| Package Width | 4.40 mm |
| Package Length | 0.173 in |
| Montaj Stili | Surface mount |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Shutdown Supply Current | 10 nA |
MAX3232EEUP+G071 0.173 in Pin Yapısı Kılavuzu
MAX3232EEUP+G071 (0.173 in paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX3232EEUP+G071.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX3232EEUP+G071 için uygundur 6 uygulamas: Industrial Serial Controller, Point-of-Sale Terminal, Test and Measurement Instrument, Embedded Data Acquisition Unit, Barcode and Label Equipment, Service and Diagnostics Interface.
Industrial Serial Controller
The MAX3232EEUP+G071 fits an industrial controller that must retain a legacy RS-232 port while running its digital logic from a 3.3 V or 5 V rail. Its two transmitters and two receivers support full-duplex communication with two connected devices, while the 250 kbps rate is appropriate for supervisory, configuration, and service protocols. The integrated charge-pump circuitry generates the bipolar RS-232 levels without requiring a separate negative power supply, simplifying the power architecture and reducing board area.
Önerilen
Point-of-Sale Terminal
A point-of-sale terminal can use the MAX3232EEUP+G071 to connect a low-voltage controller to an RS-232 receipt printer, scanner, or customer-display interface. The 3 V to 5.5 V operating range fits common embedded processors, and the dual-driver, dual-receiver arrangement supports more than one peripheral when the system uses separate transmit and receive lines. Its 250 kbps maximum data rate is well matched to the short-distance, low-speed serial traffic commonly used by retail peripherals.
Önerilen
Test and Measurement Instrument
The MAX3232EEUP+G071 is appropriate for test and measurement instruments that need a PC-facing RS-232 command port. Two receivers allow the instrument to monitor or receive on two channels, while two transmitters support outbound commands and status messages. Its 250 kbps rate and integrated level translation simplify communication with legacy test equipment, and the surface-mount 20-pin TSSOP package suits compact benchtop or rack-mount controller boards.
Önerilen
Embedded Data Acquisition Unit
A compact data-acquisition unit can place the MAX3232EEUP+G071 between its control logic and an external RS-232 instrument. The device translates CMOS/TTL logic to and from bipolar RS-232 while operating from the same 3 V or 5 V rail used by many embedded processors. This avoids a separate negative-voltage supply and allows both channels to be used for commands and measurement data. The 250 kbps limit should be checked against the selected protocol and cable environment.
Önerilen
Barcode and Label Equipment
Barcode scanners, label printers, and handheld service tools frequently expose RS-232 ports for configuration or diagnostic communication. The MAX3232EEUP+G071 provides two RS-232 transmitters and receivers from a 3 V to 5.5 V supply, allowing a modern controller board to replace a legacy PC serial port without adding a bipolar power rail. Its 20-pin TSSOP package supports compact designs, while the family-level 15 kV ESD protection helps improve robustness at connector entry points.
Önerilen
Service and Diagnostics Interface
The MAX3232EEUP+G071 can provide a dedicated service port on industrial or commercial equipment without exposing internal logic voltages. One RS-232 channel can carry technician commands while another provides diagnostic or status information, depending on the system protocol. Operating from 3 V to 5.5 V simplifies integration with the equipment controller, and the 250 kbps interface rate supports common configuration links. Add suitable connector-level protection when the port will be exposed to long or frequently disconnected cables.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MAX3232EEUP+G071 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MAX3232EEUE+ | MAX3232ECUP+G071 | MAX3222EEUP+T | MAX3222ECAP | MAX3232EEUP+ |
|---|---|---|---|---|---|---|
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Transmitter Count | 2 | 2 | 2 | 2 | 2 | 2 |
| Receiver Count | 2 | 2 | 2 | 2 | 2 | 2 |
| Mounting Style | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Ana Farklılayıcılar
- Exact G071 ordering option within the MAX3232E family (karşılaştırma:MAX3232EEUP+)
- Higher listed data-rate capability for the base ordering code (karşılaştırma:MAX3232EEUP+)
- Lower documented shutdown supply current than MAX3222E alternatives (karşılaştırma:MAX3222EEUP+T)
Tasarım Notları
Place the required charge-pump capacitors and interface capacitors directly beside their associated MAX3232EEUP+G071 pins, with short ground returns and no intervening test pads unless their effect has been evaluated. Keep the external RS-232 connector and protection components near the board edge. Where possible, route driver and receiver traces away from switching-regulator inductors and high-current return paths to reduce noise coupling.
Maintain a clear separation between the RS-232 connector side of the board and sensitive digital or analog circuitry. Connect the interface ground reference to the equipment ground in accordance with the system grounding strategy, and use a continuous ground reference beneath the interface area when practical. Long external cables can carry electrostatic discharge and common-mode noise, so validate connector protection independently of the IC's internal ESD characteristics.
Do not substitute a related MAX3222E or MAX3232E ordering code solely because the package is also called 20-pin TSSOP. The MAX3222E family is documented as pin-, package-, and functionally compatible with MAX3232E, but its receivers remain active in shutdown mode. Also verify the temperature grade, operating supply, data rate, and suffix-specific ordering requirements before approving a replacement.
The MAX3232EEUP+G071 operates from 3 V to 5.5 V, allowing use with common 3.3 V and 5 V rails. Nevertheless, follow the datasheet's recommended capacitor types, values, and placement because charge-pump operation and interface stability depend on correct local decoupling. Confirm supply sequencing and ensure logic-domain signals remain within the transmitter and receiver input limits when the connector is active.
Uyumluluk Bilgisi
The manufacturer datasheet describes the MAX3222E/MAX3232E family. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for this ordering code were not established from the listed product information.