Texas Instruments

MAX3232EIDW - 250kbps Dual RS-232 Transceiver | Texas Instruments

部品番号: MAX3232EIDW ✓ 生産中
3 V to 5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX3232EIDW 概要

Texas Instruments MAX3232EIDW is a dual-channel RS-232 line driver/receiver operating from a 3 V to 5.5 V supply, with data signaling rates up to 250 kbps and ±15 kV IEC ESD protection. It is packaged in a 16-pin SOIC for industrial, communications, instrumentation, and legacy serial-port interface applications.

An RS-232 transceiver is an interface IC that converts logic-level signals from an asynchronous communication controller into RS-232 line levels and converts received RS-232 signals back into digital logic levels. The MAX3232E combines two line drivers, two line receivers, and a dual charge-pump circuit in one 16-pin SOIC package. Its charge-pump design allows true RS-232 operation from a single 3 V to 5.5 V supply without a separate bipolar supply.

Key features include two driver channels, two receiver channels, operation up to 250 kbps, and ±15 kV IEC ESD protection on the serial-port connection pins, including ground. The MAX3232E designation identifies the enhanced ESD-protected family, while the DW suffix denotes the 16-pin SOIC configuration. The 3 V to 5.5 V operating range supports both 3.3 V and 5 V system rails.

Technically, the internal charge pumps generate the positive and negative voltage levels required by the RS-232 interface while the drivers and receivers perform level conversion. Charge-pump capacitors and the supply bypass capacitor must be connected according to the manufacturer's recommended application circuit. Adequate trace routing and grounding help preserve signal integrity and reduce radiated emissions at higher data rates.

Typical applications include RS-232 links between embedded systems and industrial equipment, PC-compatible serial ports, test and measurement instruments, point-of-sale terminals, and legacy data-acquisition equipment. The dual-channel arrangement allows simultaneous transmit and receive operation across two RS-232 ports when the controller supports two UART channels.

For PCB implementation, place the charge-pump capacitors and input bypass capacitor close to their associated pins, keep the interface connector away from sensitive analog circuitry, and provide a stable ground return. Validate the completed design for ESD, emissions, and receiver thresholds if the cable length or system operating environment exceeds the reference conditions used during development.

This product page combines manufacturer specifications, interface selection guidance, drop-in alternatives, and practical PCB implementation advice to support RS-232 design and sourcing decisions.

ドロップイン代替品: MAX3232EIDW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX3232EIDW (同一形状・フットプリント) — 相違点: Package, ESD Protection, Product Type, Maximum Data Rate, Number of Drivers.

Texas Instruments
Package: 16-SSOP, 5.30 mm width
ESD Protection: +/-15 kV terminal-to-terminal
Product Type: RS-232 line driver/receiver transceiver
比較対象 MAX3232EIDW →
Texas Instruments
Package: 16-pin SOIC (DW)
Product Type: RS-232 line driver/receiver transceiver
Maximum Data Rate: 250 kbit/s
比較対象 MAX3232EIDW →
Texas Instruments
ESD Protection: ±15 kV IEC ESD protection
Product Type: Dual RS-232 line driver and receiver
比較対象 MAX3232EIDW →
Texas Instruments
Package: 16-SOIC (0.154 inch, 3.90 mm width)
ESD Protection: ±15 kV
Product Type: Dual RS-232 line driver/receiver transceiver
比較対象 MAX3232EIDW →
Texas Instruments
Package: 16-pin TSSOP
ESD Protection: ±15kV
Product Type: Dual RS-232 line driver and receiver
比較対象 MAX3232EIDW →
Texas Instruments
Package: 16-pin TSSOP
ESD Protection: ±15kV
Product Type: Dual RS-232 line driver and receiver
比較対象 MAX3232EIDW →

MAX3232IPWR

✅ ドロップイン
Texas Instruments
📦 16-pin SOIC
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

価格はお問い合わせください

データシートを見る →

MAX3232EIDR

✅ ドロップイン
Texas Instruments
📦 16-pin SOIC
Dual RS-232 line driver/receiver transceiver · 2 drivers · 2 receivers · 250 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · ±15 kV

価格はお問い合わせください

データシートを見る →

MAX3232ECDR

✅ ドロップイン
Texas Instruments
📦 16-pin SOIC
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

価格はお問い合わせください

データシートを見る →

MAX3232CDBR

✅ ドロップイン
Texas Instruments
📦 16-pin SOIC
RS-232 line driver/receiver transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · 5 V logic · 300 uA · 0.1 uF

価格はお問い合わせください

データシートを見る →

MAX3232IPW

✅ ドロップイン
Texas Instruments
📦 16-pin SOIC
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

価格はお問い合わせください

データシートを見る →

MAX3232EIDW 仕様

Product Type Dual RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Number of Driver Channels 2
Number of Receiver Channels 2
Maximum Data Rate 250 kbps
ESD Protection ±15 kV IEC
Interface Standard TIA/EIA-232-F
Supply Type Single 3 V to 5.5 V supply
Charge Pump Dual
パッケージ 16-pin SOIC
動作温度範囲 -40 °C to +85 °C
実装タイプ Surface mount
Supplier Operating Temperature Grade -40 °C to +85 °C

MAX3232EIDW ピン構成

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
ピン 1 T1OUT — RS-232 driver 1 output
ピン 2 T2OUT — RS-232 driver 2 output
ピン 3 T1IN — RS-232 driver 1 input
ピン 4 T2IN — RS-232 driver 2 input
ピン 5 V- — Negative charge-pump output
ピン 6 VCC — Positive supply
ピン 7 R1OUT — RS-232 receiver 1 output
ピン 8 R2OUT — RS-232 receiver 2 output
ピン 9 R2IN — RS-232 receiver 2 input
ピン 10 R1IN — RS-232 receiver 1 input
ピン 11 GND — Ground
ピン 12 C1+ — Charge-pump capacitor 1 positive terminal
ピン 13 C1- — Charge-pump capacitor 1 negative terminal
ピン 14 C2+ — Charge-pump capacitor 2 positive terminal
ピン 15 C2- — Charge-pump capacitor 2 negative terminal
ピン 16 V+ — Positive charge-pump output

主な用途

MAX3232EIDW の用途: 6 件s: Industrial Serial Communication, Embedded UART to RS-232, Test and Measurement Equipment, Point-of-Sale Terminal Interface, Data Acquisition Equipment, Legacy Serial Port Upgrade.

🏭

Industrial Serial Communication

The MAX3232EIDW fits industrial serial links that require two RS-232 channels, a single 3 V to 5.5 V supply, and protected external interfaces. Its two drivers and two receivers support full-duplex communication without requiring a separate bipolar supply, while ±15 kV IEC ESD protection strengthens the connector-facing pins. The 16-pin SOIC package is practical for control boards with limited space. Designers should route the interface ground carefully, keep charge-pump capacitors close to their pins, and validate the completed equipment against the expected industrial cable length and ESD environment.

🧩

Embedded UART to RS-232

The MAX3232EIDW provides the level-shifting stage between a 3.3 V or 5 V asynchronous UART and a legacy RS-232 port. Its dual charge-pump circuit generates the positive and negative signal levels from the same supply used by many embedded controllers, avoiding a separate power rail. Two drivers and two receivers allow paired transmit and receive paths in a compact 16-pin SOIC. For dependable results, follow the manufacturer capacitor-selection and layout guidance, provide a low-impedance ground return, and test the interface at the maximum intended baud rate and cable length.

🔧

Test and Measurement Equipment

The MAX3232EIDW is suitable for adding a protected RS-232 control or data port to test and measurement instruments. Its dual-channel arrangement can support two independent RS-232 paths when the instrument's controller provides suitable UART resources, while the 250 kbps capability covers many configuration and telemetry links. The ±15 kV IEC ESD protection on serial-port pins is especially relevant to externally accessible equipment. Engineers should combine the transceiver with chassis grounding, controlled cable routing, and appropriate enclosure testing so that connector-side transients do not propagate into sensitive measurement circuitry.

🖥️

Point-of-Sale Terminal Interface

The MAX3232EIDW can support legacy point-of-sale and service-terminal connections that continue to use RS-232. Two driver/receiver channels provide flexibility for separate command and status paths, while operation from 3 V to 5.5 V simplifies integration with mixed-voltage control electronics. The single-supply charge pump avoids adding a dedicated bipolar regulator. Because peripherals and service connectors can be exposed to user-accessible cabling, the ±15 kV IEC ESD protection is a meaningful benefit. Production designs should still verify connector pinout, ground continuity, shielding, and system-level EMC performance.

📡

Data Acquisition Equipment

The MAX3232EIDW is useful for data-acquisition equipment that must communicate with a host through a legacy RS-232 port. The dual-driver and dual-receiver organization can accommodate both control commands and returned measurements when the host interface exposes two channels. Operating from 3 V to 5.5 V supports embedded controllers and data-processing modules without a separate bipolar RS-232 supply, and the 16-pin SOIC keeps the interface compact. Preserve analog and digital ground separation where appropriate, route the serial pair away from sensitive inputs, and use the manufacturer's charge-pump network to minimize signal disturbance.

💻

Legacy Serial Port Upgrade

The MAX3232EIDW is appropriate for modernizing equipment that retains an RS-232 connector but needs a compact, single-supply interface implementation. Its 3 V to 5.5 V operating range can simplify transitions from older 5 V logic, and its enhanced ±15 kV IEC ESD specification strengthens a connector that may be exposed to external cables. The 16-pin SOIC footprint supports board-level replacement of compatible MAX3232-family devices. Before substitution, verify the exact footprint, pin functions, capacitor values, temperature requirements, and whether the original design relied on non-E-family behavior at the external pins.

What is the MAX3232EIDW?
The MAX3232EIDW is a Texas Instruments dual RS-232 transceiver with two line drivers, two line receivers, and a dual charge-pump circuit in a 16-pin SOIC package. According to the MAX3232E product information, it operates from a 3 V to 5.5 V supply, supports data rates up to 250 kbps, and provides ±15 kV IEC ESD protection on the serial-port pins. It bridges the logic-level interface of an asynchronous controller and a TIA/EIA-232-F serial port.
What is the operating voltage of MAX3232EIDW?
The MAX3232EIDW operates from 3 V to 5.5 V. According to the Texas Instruments MAX3232 product page, this range supports systems using either 3.3 V or 5 V logic and supply rails. The internal dual charge pump produces the positive and negative voltage levels required by RS-232 from this single supply. Decoupling and charge-pump capacitor values must follow the manufacturer application circuit.
What are the key specifications of MAX3232EIDW that engineers should know?
The MAX3232EIDW combines two RS-232 drivers, two receivers, and a dual charge pump in a 16-pin SOIC package. According to Texas Instruments, it operates from 3 V to 5.5 V, supports signaling up to 250 kbps, meets TIA/EIA-232-F requirements, and provides ±15 kV IEC ESD protection on the serial-port connection pins. Its single-supply charge-pump architecture eliminates the need for a separate bipolar RS-232 supply.
Where can I download the MAX3232EIDW datasheet PDF?
The official MAX3232EIDW documentation is available through the Texas Instruments MAX3232 product page at https://www.ti.com/product/MAX3232, which links the manufacturer datasheet and supporting information. The component is the 16-pin SOIC member of the MAX3232E family. For exact pin assignments, electrical limits, capacitor values, and application details, use the manufacturer datasheet rather than a distributor-generated summary.
Where is the MAX3232EIDW pinout located?
The MAX3232EIDW pinout is shown in the pin-configuration section of the Texas Instruments MAX3232E datasheet. The 16-pin SOIC includes two driver outputs, two receiver inputs, receiver outputs, charge-pump capacitor terminals, supply, and ground pins. The manufacturer pin-description table should be used when assigning PCB nets, especially because the charge-pump capacitor pins must follow the specified V+ and V- topology.
What can replace MAX3232EIDW?
The closest same-manufacturer replacements are the MAX3232IPW and MAX3232IPWR, which use a 16-pin SOIC footprint, and the MAX3232EIDR, which shares the enhanced ESD-protection function. Texas Instruments describes the MAX3232E as an improved direct drop-in replacement for the MAX3232. Confirm the exact suffix, operating temperature, lead finish, and ESD rating against the original design before replacing the MAX3232EIDW.
Is MAX3232EIDW the same as MAX3232IPWR?
The MAX3232EIDW and MAX3232IPWR are both 16-pin SOIC RS-232 transceivers with the same two-channel architecture, making the IPW family a strong footprint-compatible option. The MAX3232E family adds ±15 kV IEC ESD protection and is specified as an improved direct drop-in replacement for the MAX3232. Package construction and temperature-grade ordering suffixes should still be checked before treating any ordering code as an exact interchange.
MAX3232EIDW vs MAX3232IPWR: which is better for a new design?
The MAX3232EIDW is preferable for a new design when robust ±15 kV IEC ESD protection on the serial-port pins is important. The MAX3232IPWR provides a familiar 16-pin SOIC RS-232 implementation with two drivers and two receivers, but it belongs to the original MAX3232 family. According to Texas Instruments, MAX3232E is the improved direct drop-in replacement, so the E-family is the stronger choice when enhanced interface protection is desired.
When should I choose MAX3232EIDW over MAX3232ECDR?
Choose the MAX3232EIDW when the design needs the enhanced MAX3232E family's ±15 kV IEC ESD protection and an industrial-temperature 16-pin SOIC configuration. The MAX3232ECDR is also a 16-pin SOIC option, but its exact electrical and ordering characteristics should be checked against the required temperature grade and protection level. For new designs, the EIDW is appropriate when both broad operating-temperature support and enhanced ESD protection are specified.
Is MAX3232EIDW suitable for industrial RS-232 equipment?
The MAX3232EIDW is suitable for many industrial RS-232 interfaces because its specified operating range is -40 °C to +85 °C and its serial-port pins include ±15 kV IEC ESD protection. The dual driver/receiver arrangement supports two communication channels, while the 3 V to 5.5 V supply range accommodates common embedded-system rails. Final suitability still depends on enclosure grounding, cable routing, EMC validation, and system-level ESD requirements.
What is the maximum data rate of MAX3232EIDW?
The MAX3232EIDW supports RS-232 data signaling rates up to 250 kbps. According to the Texas Instruments MAX3232 product information, it is a dual-channel 250-kbps RS-232 line driver/receiver. This rate is suitable for many asynchronous serial links, but the complete interface budget must also account for controller timing, cable length, connector behavior, grounding, and the receiver's response characteristics.
What ESD protection does MAX3232EIDW provide?
The MAX3232EIDW provides ±15 kV IEC ESD protection on the RS-232 connection pins, including ground. Texas Instruments identifies this feature as a defining benefit of the MAX3232E family. The rating does not eliminate the need for sound enclosure and cable design, and it should not be treated as complete protection for every internal node. External transient events still require system-level validation and, where appropriate, supplementary protection.
How much power does the MAX3232EIDW charge pump consume?
The MAX3232EIDW draws its operating power from a single 3 V to 5.5 V supply, with the internal charge pump generating bipolar RS-232 levels. A precise supply-current specification is not established in the available product summary, so consult the manufacturer datasheet for the applicable current and quiescent-current values. Actual board consumption will vary with data activity, external capacitance, supply voltage, and the connected interface load.
Where can I buy MAX3232EIDW and check its lead time?
Use the Request a Quote form on this page to request MAX3232EIDW availability, current lead time, and a quotation. The manufacturer lists MAX3232 as the current family reference, while distributor search results identify the MAX3232EIDW as a 16-SOIC RS-232 transceiver. The quote form is the appropriate route for current stock confirmation and order-specific scheduling rather than relying on a historical catalog record.
What is the price and stock status of MAX3232EIDW?
Current price and stock status for MAX3232EIDW should be obtained through the Request a Quote form on this page. The component is a cataloged Texas Instruments 16-pin SOIC RS-232 transceiver, but inventory and order quantities can change by date, region, and packaging. Submit the required quantity and target shipment details through the quote workflow to obtain an actionable commercial response.

エンジニアリング参考データ: MAX3232EIDW — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MAX3232EIDW when a board needs two RS-232 channels, operation from a 3 V to 5.5 V rail, and enhanced ±15 kV IEC ESD protection on externally accessible serial pins. It is particularly suitable for industrial, instrumentation, and legacy equipment designs operating across -40 °C to +85 °C. The MAX3232IPWR or MAX3232IPW is appropriate when the existing MAX3232-family behavior is desired and the enhanced E-family protection is not required. MAX3232EIDR is the closest site-listed ordering option for the same enhanced family, but the suffix, packing, and temperature code must be reconciled with the assembled PCB. MAX3232ECDR and MAX3232CDBR are also 16-pin SOIC alternatives, although their exact protection and temperature characteristics should be checked. MAX232EIPWR should be selected only for a single-channel interface; it does not provide the same two-channel integration as the MAX3232EIDW.

代替品との比較

パラメータ この製品 MAX3232IPWR MAX3232EIDR MAX3232ECDR MAX3232CDBR MAX3232IPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Charge-Pump Architecture Dual charge pump with single supply Dual charge pump with single supply Dual charge pump with single supply Dual charge pump with single supply Dual charge pump with single supply Dual charge pump with single supply

主な差別化要因

  • Enhanced ESD protection (vs MAX3232IPWR)
  • Dual-channel RS-232 integration (vs MAX232EIPWR)
  • Single-supply operation with industrial temperature range (vs MAX3232CDBR)

設計ノート

Place the charge-pump capacitors, supply bypass capacitor, and transceiver as close together as practical. Keep the V+ and V- charge-pump loop compact because long traces can increase radiated emissions and make the interface sensitive to external noise. Connect the connector-side ground return directly to the transceiver ground with a low-impedance path, and use the manufacturer pin-description and typical-application diagrams when assigning every 16-pin SOIC net.

Route each RS-232 driver output toward its connector without stubs, and keep the driver and receiver nets away from clocks, switching regulators, and analog inputs. The MAX3232EIDW supports up to 250 kbps, but usable cable length and signal integrity also depend on the receiver thresholds, connector, ground return, and baud rate. Test with the intended cable and enclosure because a bench connection with a short ground lead can conceal field-related problems.

Do not confuse the MAX3232E enhanced-protection ordering family with every MAX3232 suffix. The MAX3232EIDW provides ±15 kV IEC ESD protection on the serial-port connection pins, while original MAX3232 variants may have different protection specifications. Also verify that the replacement uses the same 16-pin SOIC footprint, that external capacitor values meet the manufacturer recommendation, and that no board relies on a non-standard pin function.

Treat the RS-232 cable interface as a potential noise source even when it is electrically unconnected during board testing. Provide chassis grounding and cable shielding appropriate to the enclosure, avoid long parallel runs between signal and ground conductors, and maintain a low-impedance ground return. If radiated emissions are marginal, inspect connector metal, shield termination, ground-pad geometry, and the separation between the charge-pump network and sensitive circuitry.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer product information identifies ±15 kV IEC ESD protection and TIA/EIA-232-F interface compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not established by the available manufacturer summary.

関連検索

MAX3232EIDW datasheet MAX3232EIDW datasheet pdf MAX3232EIDW pinout MAX3232EIDW equivalent MAX3232EIDW replacement MAX3232EIDW drop-in replacement MAX3232EIDW cross reference MAX3232EIDW price MAX3232EIDW stock Texas Instruments MAX3232EIDW MAX3232EIDW 16-SOIC RS-232 MAX3232EIDW vs MAX3232IPWR

関連部品&用語

Texas Instruments MAX3232EIDW MAX3232IPWR MAX3232EIDR MAX3232ECDR MAX3232CDBR MAX3232IPW MAX232EIPWR RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC dual charge pump single-supply interface TIA/EIA-232-F IEC ESD protection UART 3.3 V logic 5 V logic 250 kbps 16-pin SOIC SOIC package family surface-mount package industrial communications legacy serial port
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示