MAX3232EIDW - 250kbps Dual RS-232 Transceiver | Texas Instruments
料号: MAX3232EIDW ✓ 量产中MAX3232EIDW 概述
An RS-232 transceiver is an interface IC that converts logic-level signals from an asynchronous communication controller into RS-232 line levels and converts received RS-232 signals back into digital logic levels. The MAX3232E combines two line drivers, two line receivers, and a dual charge-pump circuit in one 16-pin SOIC package. Its charge-pump design allows true RS-232 operation from a single 3 V to 5.5 V supply without a separate bipolar supply.
Key features include two driver channels, two receiver channels, operation up to 250 kbps, and ±15 kV IEC ESD protection on the serial-port connection pins, including ground. The MAX3232E designation identifies the enhanced ESD-protected family, while the DW suffix denotes the 16-pin SOIC configuration. The 3 V to 5.5 V operating range supports both 3.3 V and 5 V system rails.
Technically, the internal charge pumps generate the positive and negative voltage levels required by the RS-232 interface while the drivers and receivers perform level conversion. Charge-pump capacitors and the supply bypass capacitor must be connected according to the manufacturer's recommended application circuit. Adequate trace routing and grounding help preserve signal integrity and reduce radiated emissions at higher data rates.
Typical applications include RS-232 links between embedded systems and industrial equipment, PC-compatible serial ports, test and measurement instruments, point-of-sale terminals, and legacy data-acquisition equipment. The dual-channel arrangement allows simultaneous transmit and receive operation across two RS-232 ports when the controller supports two UART channels.
For PCB implementation, place the charge-pump capacitors and input bypass capacitor close to their associated pins, keep the interface connector away from sensitive analog circuitry, and provide a stable ground return. Validate the completed design for ESD, emissions, and receiver thresholds if the cable length or system operating environment exceeds the reference conditions used during development.
This product page combines manufacturer specifications, interface selection guidance, drop-in alternatives, and practical PCB implementation advice to support RS-232 design and sourcing decisions.
直接替换替代料: MAX3232EIDW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX3232EIDW (相同外形与封装尺寸) ——差异在于 Package, ESD Protection, Product Type, Maximum Data Rate, Number of Drivers.
MAX3232IPWR
✅ 直接替换联系询价
查看数据手册 →MAX3232EIDR
✅ 直接替换联系询价
查看数据手册 →MAX3232ECDR
✅ 直接替换联系询价
查看数据手册 →MAX3232CDBR
✅ 直接替换联系询价
查看数据手册 →MAX3232IPW
✅ 直接替换联系询价
查看数据手册 →MAX3232EIDW 规格参数
| Product Type | Dual RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Number of Driver Channels | 2 |
| Number of Receiver Channels | 2 |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV IEC |
| Interface Standard | TIA/EIA-232-F |
| Supply Type | Single 3 V to 5.5 V supply |
| Charge Pump | Dual |
| 封装 | 16-pin SOIC |
| 工作温度范围 | -40 °C to +85 °C |
| 安装类型 | Surface mount |
| Supplier Operating Temperature Grade | -40 °C to +85 °C |
MAX3232EIDW 引脚配置
| 引脚 1 | T1OUT — RS-232 driver 1 output |
| 引脚 2 | T2OUT — RS-232 driver 2 output |
| 引脚 3 | T1IN — RS-232 driver 1 input |
| 引脚 4 | T2IN — RS-232 driver 2 input |
| 引脚 5 | V- — Negative charge-pump output |
| 引脚 6 | VCC — Positive supply |
| 引脚 7 | R1OUT — RS-232 receiver 1 output |
| 引脚 8 | R2OUT — RS-232 receiver 2 output |
| 引脚 9 | R2IN — RS-232 receiver 2 input |
| 引脚 10 | R1IN — RS-232 receiver 1 input |
| 引脚 11 | GND — Ground |
| 引脚 12 | C1+ — Charge-pump capacitor 1 positive terminal |
| 引脚 13 | C1- — Charge-pump capacitor 1 negative terminal |
| 引脚 14 | C2+ — Charge-pump capacitor 2 positive terminal |
| 引脚 15 | C2- — Charge-pump capacitor 2 negative terminal |
| 引脚 16 | V+ — Positive charge-pump output |
典型应用
MAX3232EIDW 适用于 6 应用s: Industrial Serial Communication, Embedded UART to RS-232, Test and Measurement Equipment, Point-of-Sale Terminal Interface, Data Acquisition Equipment, Legacy Serial Port Upgrade.
Industrial Serial Communication
The MAX3232EIDW fits industrial serial links that require two RS-232 channels, a single 3 V to 5.5 V supply, and protected external interfaces. Its two drivers and two receivers support full-duplex communication without requiring a separate bipolar supply, while ±15 kV IEC ESD protection strengthens the connector-facing pins. The 16-pin SOIC package is practical for control boards with limited space. Designers should route the interface ground carefully, keep charge-pump capacitors close to their pins, and validate the completed equipment against the expected industrial cable length and ESD environment.
推荐
Embedded UART to RS-232
The MAX3232EIDW provides the level-shifting stage between a 3.3 V or 5 V asynchronous UART and a legacy RS-232 port. Its dual charge-pump circuit generates the positive and negative signal levels from the same supply used by many embedded controllers, avoiding a separate power rail. Two drivers and two receivers allow paired transmit and receive paths in a compact 16-pin SOIC. For dependable results, follow the manufacturer capacitor-selection and layout guidance, provide a low-impedance ground return, and test the interface at the maximum intended baud rate and cable length.
推荐
Test and Measurement Equipment
The MAX3232EIDW is suitable for adding a protected RS-232 control or data port to test and measurement instruments. Its dual-channel arrangement can support two independent RS-232 paths when the instrument's controller provides suitable UART resources, while the 250 kbps capability covers many configuration and telemetry links. The ±15 kV IEC ESD protection on serial-port pins is especially relevant to externally accessible equipment. Engineers should combine the transceiver with chassis grounding, controlled cable routing, and appropriate enclosure testing so that connector-side transients do not propagate into sensitive measurement circuitry.
推荐
Point-of-Sale Terminal Interface
The MAX3232EIDW can support legacy point-of-sale and service-terminal connections that continue to use RS-232. Two driver/receiver channels provide flexibility for separate command and status paths, while operation from 3 V to 5.5 V simplifies integration with mixed-voltage control electronics. The single-supply charge pump avoids adding a dedicated bipolar regulator. Because peripherals and service connectors can be exposed to user-accessible cabling, the ±15 kV IEC ESD protection is a meaningful benefit. Production designs should still verify connector pinout, ground continuity, shielding, and system-level EMC performance.
推荐
Data Acquisition Equipment
The MAX3232EIDW is useful for data-acquisition equipment that must communicate with a host through a legacy RS-232 port. The dual-driver and dual-receiver organization can accommodate both control commands and returned measurements when the host interface exposes two channels. Operating from 3 V to 5.5 V supports embedded controllers and data-processing modules without a separate bipolar RS-232 supply, and the 16-pin SOIC keeps the interface compact. Preserve analog and digital ground separation where appropriate, route the serial pair away from sensitive inputs, and use the manufacturer's charge-pump network to minimize signal disturbance.
推荐
Legacy Serial Port Upgrade
The MAX3232EIDW is appropriate for modernizing equipment that retains an RS-232 connector but needs a compact, single-supply interface implementation. Its 3 V to 5.5 V operating range can simplify transitions from older 5 V logic, and its enhanced ±15 kV IEC ESD specification strengthens a connector that may be exposed to external cables. The 16-pin SOIC footprint supports board-level replacement of compatible MAX3232-family devices. Before substitution, verify the exact footprint, pin functions, capacitor values, temperature requirements, and whether the original design relied on non-E-family behavior at the external pins.
推荐
推荐产品汇总
工程参考数据: MAX3232EIDW ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX3232IPWR | MAX3232EIDR | MAX3232ECDR | MAX3232CDBR | MAX3232IPW |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Transceiver Configuration | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Charge-Pump Architecture | Dual charge pump with single supply | Dual charge pump with single supply | Dual charge pump with single supply | Dual charge pump with single supply | Dual charge pump with single supply | Dual charge pump with single supply |
关键差异点
- Enhanced ESD protection (对比 MAX3232IPWR)
- Dual-channel RS-232 integration (对比 MAX232EIPWR)
- Single-supply operation with industrial temperature range (对比 MAX3232CDBR)
设计说明
Place the charge-pump capacitors, supply bypass capacitor, and transceiver as close together as practical. Keep the V+ and V- charge-pump loop compact because long traces can increase radiated emissions and make the interface sensitive to external noise. Connect the connector-side ground return directly to the transceiver ground with a low-impedance path, and use the manufacturer pin-description and typical-application diagrams when assigning every 16-pin SOIC net.
Route each RS-232 driver output toward its connector without stubs, and keep the driver and receiver nets away from clocks, switching regulators, and analog inputs. The MAX3232EIDW supports up to 250 kbps, but usable cable length and signal integrity also depend on the receiver thresholds, connector, ground return, and baud rate. Test with the intended cable and enclosure because a bench connection with a short ground lead can conceal field-related problems.
Do not confuse the MAX3232E enhanced-protection ordering family with every MAX3232 suffix. The MAX3232EIDW provides ±15 kV IEC ESD protection on the serial-port connection pins, while original MAX3232 variants may have different protection specifications. Also verify that the replacement uses the same 16-pin SOIC footprint, that external capacitor values meet the manufacturer recommendation, and that no board relies on a non-standard pin function.
Treat the RS-232 cable interface as a potential noise source even when it is electrically unconnected during board testing. Provide chassis grounding and cable shielding appropriate to the enclosure, avoid long parallel runs between signal and ground conductors, and maintain a low-impedance ground return. If radiated emissions are marginal, inspect connector metal, shield termination, ground-pad geometry, and the separation between the charge-pump network and sensitive circuitry.
合规信息
The manufacturer product information identifies ±15 kV IEC ESD protection and TIA/EIA-232-F interface compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not established by the available manufacturer summary.